PROVISION OF WAITING HALL FOR THE SPARSH CENTRE AND ADDITION/ ALTERATION TO MULTIPURPOSE HALL AT JCDA (AF) VAYUSENA NAGAR NAGPUR

Amount

Excavating in trenches, in hard/ dense soil n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. N exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed.

Material and labour for cement concrete type D2 1:4:8 (40mm graded agreggate) in foundations, filling and mass concrete complete all as specified and directed.

Material and labour for TMT bar 5mm dia and over upto and including 10mm dia in ,stirrups, spacers and binders complete all as specified and directed.

Material and labour for brick work with fly ash old size bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) complete all as specified and as directed.

Material and labour for rendering 15mm thick on other than fair finish of Bricks/concrete/ stone surface of wall in CM (1:4) mixed with WPC and finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered or un-plastered surfaces of walls, and applying two coats of cement based paint over a coat of primer complete all as specified.

Material and labour for complete removal of existing treatment of wall surfaces and applying two coats of distemper oil emulsion complete all as specified and directed

Material and labour for applying heritage/ texture finish of approved design/ colour over cement plaster on wall including preparation of old treated surfaces and finished complete all as specfied and directed. Note : Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat and clean coat shall be approved by GE.

Material and labour for preparation of old plastered wall surfaces and applying one coat of distemper oil emulsion complete all as specified and directed

Material and labour for 3mm thick wall care putty on wall complete all as spcified

Material and labour for preperation of old painted surfaces, one coat of synthetic enamel paint on steel surface over 10 cm girth including preparation of surface complete all as specified and as directed.

Supply and fix rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

Supply and fix GI Tubes, 15mm bore ‘medium grade’, galvanised, including with all fitting and fixed complete to walls and ceilings or laid in floors complete as specified and directed

All as per item No 15 above but 20 mm bore

Supply and fix for stop valves 20mm, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

Supply and fix 32 mm dia fancy type brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed all as specified and directed.

Supply and fix stainless steel grating, 150 mm dia, with waste hole all as specified and directed.

Material and labour for PVC (SWR) multi floor trap with grating including jointing with solvent cement all as specified and directed.

Supply and fix PVC, 32 mm dia polythelene High density polyethylene Pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches all as specified and as directed.

Material and labour for cast Iron nahani trap with grating,100 mm dia including jointing to waste pipe with solvent cement all as specified and directed.

Supply and fix in repair vitreous china wash down water closet, pedastal pattern (EWC) white with 'P' or 'S' trap, fixing bolts and PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete making good to floor all as specified and as directed.

Supply and fix in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Supply and fix vitreous china wash basin, white, flat back, size 550x400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets

Supply and fix PVC connection 15 mm size with PTMT nut of length 600 mm.

Supply and fix PVC low level flushing cistern white including flush pipe suitable for IWC/EWC, 10 Lit capacity complete.

Supply and fix grating doom 125mm dia. with waste hole of PTMT (minimum weight 40 gms), complete all as specified and directed by Engr-in-Charge.

S & F in repair bib tap 15mm bore fancy type chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed.

S & F in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.

Supply and fix fancy type chromium plated stop valve 15mm dia cast copper alloy, screwd down, high pressure with brand angular stop cock with wall flange screwed both ends for iron pipes or for unions and fixed complete.

Supply and fix 15 mm dia fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

M & L for concrete bed in P.C.C ( 1:4:8), type D-2 (using mm graded aggregate) to drain pipes including packing under and haunching against the sides of the pipes after laying & testing for 150mm dia pipes complete all as specified and as directed.

Material and labour for reinforced concrete pipes, class NP2, dia 150mm laid and jointed complete with collars as in drain or sewage disposal complete all as specified and as directed.

Material and labour for plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate in foundation for manholes & drains completed all as specified and directed.

Material and labour for Precast Cement Concrete 1:3:6 type C1 as in manhole covers including form work etc all as specified and as directed.

Supply and fix RCC Bends, for 150 mm bored pipe laid and jointed, complete all as specified and as directed.

Supply and fix RCC Single 'Y' junctions for 150 mm bored pipe laid and jointed complete all as specified and as directed.

S & F 150 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

Supply and fix PVC (SWR) pipes, 110 mm bore, single socketed, in any length, with rubber ring joints, fixed to wall all as specified and directed.

Supply and fix 110mm PVC (SWR) bends of any radius complete all as directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

Supply and fix anodised aluminium (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

Supply and fix anodised aluminium powder coated (minimum thickness of powder coating 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

Material and labour for prelaminated particle board 12 mm thick, exterior grade, prelaminated both sides with decorative choice laminations as per site requirement fixed with aluminium frame work as in door/fixed frame work /partition all as specified and directed .

Supply and fix door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed all as specified and directed.

Material and labour for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty all as specified and directed.

Supply and fix 4 levers brass mortice lock for aluminium door, size 100 mm all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frame) exe 1.5 sqm but n.exc 4sq.m all as specified and directed.

Material and labour for aluminium alloy, anodised, sliding door bolt (250mm long) with hasp,nstaple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-uminium alloy and fixed complete all as specified and as directed

Material and labour for floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as specified and as directed

Supply and fix cold rolled mild steel butt hinges medium weight size 100mm long complete all as specified and as directed

Supply and fix aluminium handles cast type anodised size 150 mm long complete all as specified and as directed

Supply and fix aluminium anodiesed barrel tower bolt of extruded section size 200 mm complete all as specified and as directed

Material and labour for PCC, (1:2:4) Type B-1(20mm graded stone aggregate) 25 mm thick as in floor all as specified and directed.

Dismantling of floor, hearth or wall tiling,Granite platform/kota stone flooring including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Material and labour for for Glazed ceramic coloured tiles in vertical surface 350*450*7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including rendering 10 mm thick CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado complete all as specified and as directed.

Material and labour for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors (joint free )etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of cement mortar(1:6) 15 mm thick for laying floor finishes complete all as specified and as directed.

Material and labour for virified ceramic tiles 10 mm thick (square/ rectangular) polished, (Dark Shade /Double charged/ ultracharged) area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of cement mortar(1:6) 15 mm thick for laying floor finishes complete all as specified and as directed.

Material and labour for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete alla sspecified.

Material and labour for rounding to edges of stone slabs on edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Material and labour for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) Gypboard ceiling (conforming to IS-2095-1982)manufactured by M/s India Gypsum false ceiling using GI perimeter channel of size 20mm (one flange) x 27mm (web) x 30mm (other flange) x 0.55mm thick along perimeter of ceiling fixed in wall using nylon sleeves and screws suspended from soffit with GI intermediate channels (of size 5mm45mmx15mmx0.9mm thick) @ 1220mm centre to centre with ceiling angle (of size 25mmx10mmx0.55mm thick) fixed to soffit with GI cleat and steel expansion fasteners which alternate fixed to ceiling section of 0.55mm thick having Knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm) using connecting clip and in direction perpendicular to intermediate channel @ 300 mm centre to centre and Gypboard fixed to ceiling section using 25mm drywall screws @ 230mm centre to centre complete all as per manufacturer’s instructions and as directed.Including 2 coats of OBD over a coat of 1mm thick putty and taking down of old false ceiling complete all as specified and directed.

Supply & fix12 mm thick toughened glass door/ patition of approved colour, design & logo (if required any type) side opening type or sliding type with complete fittings of make DORMA or equivalent as approved including pivot hing/floor spring , handle fancy type (for VIP office doors), locking divice with duplicate kye, spenders partition fixing rods/clits & other fittings if riquired etc & connecting jobs like tile cutting, demolition pcc, plastering & painting etc not exc. 1.50 Sqm to make site good all as specified and directed. Note- All the fittings will be approve by GE before commencement of work at site complete all as specified and directed.

Material and labour for providing Gypboard (conforming to IS-2095-1982) manufactured by M/s India Gypsum false ceiling or equivalent in S M/s Armstrong / M/s Lafarge using GI perimeter channel of size 20mm (one flange) x 27mm (web) x 30mm (other flange) x 0.55mm thick along perimeter of ceiling fixed in wall using nylon sleeves and screws suspended from soffit with GI intermediate channels (of size 5mmx45mmx15mmx0.9mm thick) @ 1220mm centre to centre with ceiling angle (of size 25mmx10mmx0.55mm thick) fixed to soffit with GI cleat and steel expansion fasteners which alternate fixed to ceiling section of 0.55mm thick having Knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm) using connecting clip and in direction perpendicular to intermediate channel @ 300 mm centre to centre and Gypboard fixed to ceiling section using 25mm drywall screws @ 230mm centre to centre complete all as per manufacturer’s instructions and as directed.Including 2 coats of OBD over a coat of 1mm thick putty and taking down of old false ceiling complete all as specified and directed.

Material and labour for Aluminium anodised or powder coated aluminium partions of any section including aluminium beading,5mm thick tinted glass or 12 mm thick prelaminated particle board with decorative choice lamination on both faces all as specified and directed.

Material and labour for prelaminated particle board 12 mm thick, exterior grade, prelaminated both sides with decorative choice laminations as per site requirement fixed with aluminium frame work as in door/fixed frame work /partition all as specified and directed.

Supply & fix aluminium framed doors with frame any pattern fixed/sliding, Three Track) using power coated alumunium sections of approved make necessary joining cleats,in each shutters and glazing clips, ruber neoprene packing, anodised aluminum snap beading screws etc. 5 mm thick tinted glass ,using powder coated aluminium sections of approved make confirming to IS.(Glazing and stainless steel/PVC wiremesh are included in the rates) complete all as specified and directed

Supply & fix aluminium framed windows any pattern fixed, sliding,hung two track/ three track if any) using power coated alumunium sections of approved make necessary joining cleats, channel for sliding,in each shutters and glazing clips, ruber neoprene packing, anodised aluminum snap beading screws etc. 5 mm thick tinted glass ,using powder coated aluminium sections of approved make confirming to IS. Note: Glazing and stainless steel/ PVC wiremesh shall be measured and paid seperately

Material and labour for plywood 18mm thick , grade BWP, type BB fixed with screws to timber frame work, make shall be approved before execution. all as specified and as directed.

Material and labour for decorative laminate type 1 (1.5mm thick) of surface finish,(sunmica) colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed by Engr-in-Charge.

Supply & fix 100mm thick synthetic cuishion of 40 density cool foam duly covered with tapestry cloth , colour and texture shall be as approved by the GE / Engr-in-Charge before fixing and it shall be as specified and shall be of removable type by providing one side zip cover tepestry cloth complete all as specified and as directed. Make of Foam cuishion: Sleepwell / Kurlon

Supply & fix ply wood grade BWR type BB 12mm thick (PLY) ISI marked fixed with screw to timber frame work fixed in repair all as specified and as directed.

Supply & fix in repairs butt hinge, medium weight ,cold rolled mild steel 100mm long all as specified and as directed.

Supply & fix extruded aluminium bow handles of size150 mm complete all as specified and directed

Supply & fix aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm size complete all as specified and directed

Supply & fix aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed.

Supply & fix floor door stopper of aluminium alloy body double and tongue annodised with rubber shoe and fixed of size 150 mm all as specified and as directed.

Supply & fix door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one all as specified and directed by Engr-in-Charge.

Supply & fix 4 levers Brass Mortice lock for Aluminium Door, size 100 mm complete all as specified and directed.

INTERNAL ELECTRIFICATION

Taking down carefully sub-main wiring of any description and making good to ther disturbed surfaces to match the existing all as specified and as directed.

Material and labour for sub main wiring (concealed/surface as required) complete with two single core 4 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 4 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 3 run of 4 sqmm&one run of PVC conduit shall be measured as single unit

Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor, etc. complete all as specified and as directed.

Material and labour for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable modular boxes ,switch plates of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed. (a) One light point controlled by one switch

(b) One fan point controlled by one switch

(c) One exhaust fan point controlled by one switch.

(d) One switch socket outlet modular type 3 pin 6 amp on same board.

All as per item No 85 above but 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on Independent board.

All as per item No 85 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board.

Note for Item No.82 to 90 :- 1. The disturbed surfaces of wall for concealing box/ wiring shall be making good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. 1. The rate for point wiring shall be deemed to included the cost of making good the disturbed surface.

Supply and fix new 18 Watt LED warm white round recessed flat panel light pearl model with locking arrangement in ceiling with a nominal system lumen output of 1800 lumens and a minimum system efficacy of 100 lumen/watt. The luminaire shall have rated system lifetime of 50,000 burning hours at L70. Make : CG Cat Part No. LSCRM-18W-WWor equivalent in Bajaj/Wipro/Philips.

Supply & fixing new decorative LED light 36 watt recessed mounting type complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, all as specified. Make : CG Cat Part No. LCTLRN-36-FO-CDL or equivalent in Bajaj/ Wipro/ Philips.

Supply and fix LED strip decorative type warm white in continuous form indoor type including connecting driver complete in all respect complete all as specified and as directed.

Supply and fix master led tube 4ft 20 W LED tube polycarbonate type having nominal system lumen output of 2100 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 40,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 18W (including driver). Make : CG cat pt no LT8-20-865(2)/ WIPRO/ Bajaj / Phillips

Supply and fix decorative box type fitting with blue coloured end caps pre wired for LED tube energy of 20 Watt . Make : Phillips/ CG at pt noDMLN1LT8-16/WIPRO/ Bajaj

Supply and fix surface mounting LED Luminaries and 1 x 10 Watt LED fitting with connecting up with copper 3 core flexible cord of minimum size 1.5 Sqmm size complete all as specified and as directed . Make : CG cat pt no CCS-102-10-65-SL-DP-NWH, Phillips, Wipro/Bajaj

Supply and fix 0-4 step, one module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and as directed. Make : Legrand Cat No. 675531 or equivalent in Seimens/Anchor Roma.

Supply and fix switch modular type, single pole one way 6 Amps, 250 volts Ac suitable for modular switch boxes without indicator, all as specified and as directed. Make : Legrand Cat No. 675501 or equivalent in Seimens/ Anchor Roma.

Supply and fix socket modular type 6 Amps 3 pin 2 module 250 volts all as specified and as directed. Make : Legrand Cat No. 675551 or equivalent in Seimens/ Anchor Roma.

Supply and fix ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals including taking down of old unserviceable all as specified and as directed.Make : Leader, Anchor

Supply and fix socket modular type 6/16 Amps, 3 pin combine, 2 module,240 volts all as specified and as directed. Make : Legrand Cat No. 675555 or equivalent in Seimens/ Anchor Roma.

Supply and fix switch modular type 16 Amps, one way with indicator, 1 module,240 volts all as specified and as directed. Make : Legrand Cat No. 675513 or equivalent in Seimens/ Anchor Roma.

Supply and fix power unit for upto 2 ton AC and geyser up to 3.5 KW modular type , 4 module,240 volts all as specified and as directed by EIC. Make : Legrand Cat No. 675558 or equivalent in Seimens/ Anchor Roma.

Supply and fix sheet metal enclosures for DB's for incorporating MCBs, TPN, 4 way, IP-43 with metal double door, 415 volts, as per IS-8623 including taking down the old unserviceable TPN DB complete all as specified and as directed.

Supply and fix MCB TPN, 100 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 415 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc including taking down of old unserviceable complete all as specified and as directed.

Supply and fix MCB SP 10-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. including taking down of old unserviceable complete all as specified and as directed.

Supply and fix MCB TPN, 63 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 415 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.

Supply and fix energy saving ceiling fan 1200 mm sweep with double ball bearing in opal white colour and BEE 5 star rated complete including provision of 3 core copper wire of size 1.5 sqmm , connected from ceiling rose to fan and marking MES No in black paint complete all as specified and as directed. Make : Crompton Greaves/ Havells/ Orient/ Usha.

Supply & fix exhaust fan PVC body 10" ( 250 mm) sweep 230 V, 50 Hz, complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, all as specified. Make : Crompton Greaves/ Havells/ Orient/ Usha.

Supply and fix wall mounted fan of size 16" plastic body including all acessories and connected material complete all as specefied and directed. Make : Crompton Greaves/ Havells/ Orient/ Usha.

Air Conditioning

Supply and install invertor based split AC of capacity 1.5 TON (Copper coil) electric driven single phase, 230 volts, 5 star rating including all accessories like brackets, rubber tubing, copper tubing, gas charging, with auto filter clean technilogy etc including testing and commissionin with as per norms of BEE and making good to the disturbed surface to match the existing surface complete all as directed Make Hitachi/LG/Blue star/Vlotas/Lloyd Note :- All cooing /condensing coil should be copper material

Supply and install Voltage stablizer automatic operation single phase naturally air cooled indoor type & designed for input variation between 130 Volt to 300 Volt with output voltage stablized at 230 Volt with accuracy of (+/-)2.5 percent of capacity 12A. Make:V guard Model No. VWR 400, Steady Volt, Microtek

Supply and fix PVC rigid conduit pipe of size 20/25 mm dia including all accessories and necessary saddles with fixing screws, gutties etc. for drain out water

Supply and fix 15 amps plug top for AC connection all as specified and directed.

Supply and fix split AC stand of outdoor unit suitable for 1.5 ton including necessary fixing arrangement.

M/s ABHIMAN HEGDE

M/s Prakash R. Verma