PETTY REPAIR TO PLUMBING, JOINERY AND ALLIED B/R WORKS AT PSY DEPT, PEDIATRIC DEPT, C1 C2 AND OTHER BLDGS IN ZONE C AT BHDC UNDER GE (EAST) DELHI CANTT-10

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and as directed.

M&L for Vitrified tiles 8-9 mm thick (square/rectengular) polished, size of each tiles is 800x800mm as in floors over and including 15 mm thick screed bed in CM 1:4 and joint shall be kept as 3mm filled with epoxy. to attain the best result 3mm thick tile spacers to be used. Masking tape shall be put before putting the epoxy grout & the grout shall be throughly cleaned immediately. complete all as specified and directed.

M&L Vitrified tiles 8-9mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

All as per item No.3 here-in-before but on vertical surfaces over and including 10 mm thick plaster in cement mortar 1:4 complete all as specified and as directed.

M & L for Coloured Glazed ceramic tiles in vertifical surface 300 x 600 x 7mm thick set and jointed in neat cement slurry and pointed in colour cement to match over and including 10 mm th rendering in CM 1:4 complete all as specified and as directed.

M & L for Non-skid Coloured Ceramic tiles 7 to 8 mm thick (Square/rectangular) area of tile exc 0.11 Sqm but not exceeding 0.18 Sqm in floors, set and jointed in neat cement to match the shade over and including 15 mm thick screed bed in CM 1 : 6 complete all as specified and as directed.

Taking down chowkhat or frame without taking off shutters of any description exc 1.5 sqm and n-exc 4 sqm each complete all as specified and directed.

Taking down chowkhat or frame without taking off shutters of any description not exc. 1.5 sqm complete all as specified and directed.

Taking down Shutters of any exc 1 Sqm but n exc 2.0 Sqm complete all as specified and directed.

S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineering- Charge. (Note: stainless steel butt hinges shall be paid separately under relevant item).

S&F 35mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /cum Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Conforming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm* 25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardware should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings.”

S&F 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 150mm long Mild steel pressed handles, oval type, stove enamelled black bolt complete all as specified and directed.

S&F 200mm Mild steel barrel tower bolts, stove enamelled black, with bright boltand fixed complete all as specified and directed.

S&F aluminium window as per TD Drg No CEDZ/TD-316 with following specification : (i) Outer frame of size 40mmx114mm with 1.mm thickness, corner 45 degree cut & aluminium welded (ii) Centre mullion of size 40mm x65mm (iii) Welded shutter (02 Nos) of size 40mmx60mmx1.3 mm thickness 45 degree cut mechanically joint with 6mm allen key boult clamp with 5mm clear glass both side EPDM rubbe gasket metal body hand layer type single point lock, aluminium kobra hinges 2 No per shutter. (iv) 12mm ss 202 grade round bar . (v) Welded wiremesh sutter (2 Nos)of size 40mmx18mmx1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh, SS 75mm long hinges,PVC magnet & necessary fitting and locking arrangement . (vi) Entire window shall be power coated with pure polyster coat of any shde as approved by GE. (vii) Window shall be installed with silicone complete all as specified and directed by Engineer in-Charge.

S&F aluminium window as per TD Drg No CEDZ/TD-316 with following specification : (i) Outer frame of size 40mmx114mm with 1.mm thickness, corner 45 degree cut & aluminium welded (ii) Centre mullion of size 40mm x65mm (iii) Welded shutter (02 Nos) of size 40mmx60mmx1.3 mm thickness 45 degree cut mechanically joint with 6mm allen key boult clamp with 5mm clear glass both side EPDM rubbe gasket metal body hand layer type single point lock, aluminium kobra hinges 2 No per shutter. (iv) 12mm ss 202 grade round bar . (v) Welded wiremesh sutter (2 Nos)of size 40mmx18mmx1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh, SS 75mm long hinges & PVC magnet. (vi) Entire window shall be power coated with pure polyster coat of any shade as approved by GE. (vii) window shall have provision of for installtaion of window AC/ Desert cooler and provision of window galls shutter, wiremesh, grill and necessary fittings and locking arrangement for subject portion will be modified as per ground requirement during the execution as per directions of Engr-in-Charge. (vii) Window shall be installed with silicone complete all as specified and directed by Engineer in-Charge.

S&F aluminium ventilator with outer frame 40mmx114mm with 1.3mm thickness corner 45 degree cut & aluminium welded centre mullion size 41mmx65mmx1.3mm thick partly glazed /guazed including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,MS wire mess, 3mm thick sheet glass etc, provision for fixing the exhaust fan complete all as specified and directed.

S & F Aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) Frame work for doors, windows,ventilators all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F in repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed echanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

S & F 12mm mm thick PVC moulded solid board both side prelaminated for door and partition complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all specified and irected.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed

S&F 150 mm Aluminium handles, cast type anodised complete all as specified and directed.

S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified.

S&F 200mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified.

S&F in repairs stainless steel kitchen sink with draining board made of 1mm thick sheet for kitchen with plug washers wate pipe cast iron cantilever bracket ovre all size 915 x 460mm with bowlsize 410x330x160mm complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and directed.

Hacking out old broken glass (any thickness) from metal frame/aluminium frames including punching or drilling out old galzing pins complete all as specified & directed.

S & F 4.0mm thick ordinary glass and glazing with oil putty in square n exc 0.5 Sqm in each pane or rubber beading /putty as required complete all as specified & directed.

S & F 4.80mm thick Frosted glass and glazing with oil putty in square n exc 0.5 Sqm in each pane or rubber beading/putty as required complete all as specified & directed.

S & F in repair Stainless steel glass door handle 600mm long with screw complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc

M&L rendering 15mm thick in Cement Mortar 1:4 on fair faces of brick or concrete, external surfaces of walls finished and even & fair complete all as specifed & as directed.

M&L rendering 15mm thick in Cement Mortar 1:6 on other than fair faces of brick surfaces of walls finished the surface even & fair complete all as specifed & as directed.

M&L 10 mm thick plastering in Cement Mortar 1:3 finished even and fair on ceilings complete all as specifed & as directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand : 2 white marble stone chipping 10mm nominal size with colour compound) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including forming groove of uniform size 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens complete all as specified and as directed

M&L for preparing the newly plastered wall surface then applying 2mm thick wall care putty followed by two coat of oil bound distemper over one coat of interior primer complete all as specified and directed.

M&L for two coat of oil bound distemper including prepration of new ceiling surface over a coat of interior primer and 2 mm thick wall care putty complete all as specified and directed.

M & L for preparing the newly plastered wall surface and applying primer with applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sq( Note: Quoted rates shall deemed to be includs painting at any height including scaffolding work, as required. ) complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floor, aprons etc.

M&L for 20 mm thick Granite work in platforms, partitions and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & half curving the edges of granite over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete including dismantling of old existing paver block tile all as specified and directed.

S&F in repair Kerb stone of 300x300x100mm thick precasted plain cement concrete type B0 , 1:2:4 , using 12.5mm graded crushed stone aggregate incl earth work for laying kerb stones.

Demolition of cement concrete (reinforced) in gd floor and paving n.exc 15 cm thickness below or above the gd level.

M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S & F in repair Aluminium extruded section body door closer, hydraulically regulated, design No 2, universal type, suitable for door shutter 701 mm to 850 mm in width and of weight 36 to 60 Kg each complete all as specified and as directed.

S & F in repair Double action floor spring, hydraulically regulated, made out of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel, heavy duty and fixed complete for glass/aluminium door complete all as specified and as directed.

S & F in repair brass mortice lock 65 mm 4 lever vertical type with duplicate key and handle set complete all as specified and as directed.

S & F in repair brass mortice lock 100 mm, 4 lever, vertical type, with duplicate key complete all as specified and as directed.

S & F in repair 150mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified.

S & F in repair 150 mm Aluminium handles, cast type anodised complete all as specified and directed.

S & F in repair stainless steel butt hinges medium weight 100 mm long fixed to frame as required complete all as specified.

S & F in repair aluminium alloy,anodised,sliding door bolt plate type 250 mm long and fixing clips of sheet ,cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified .

S&F in repair 20 mm dia decorative drapary curtain rod with finial & bracket funnels. complete all as specified.

S & F in repair of SS chrome plated finished Bottom lock/ patch of glass door complete al as specifie and directed.

S & F in repair Vitreous china wash down water closet pan (pedestal pattern), floor mounted with inbuilt P trap in white colour, including connection to trap and to flushing pipe complete all as specified and directed.

S&F in repair vitreous china Squatting pan "Orissa pattern" size 580x440xmm white, with integral foot rest incl 'P' trap and necessary connection to trap and flushing pipe etc complete all as specified and directed.

S&F in repair white Wash Basin of size 560 x 415 x 820 mm including braket complete all as specified and directed. Make : Prayag Cat No : 4602 or equivalent in CERA/Hindware/ Parryware)

S&F in repair One piece white Wash Basin with full Pedestal fo size 560 x 415 x 820 mm complete all as specified and directed. Make : Prayag Cat No : 4602 or equivalent in CERA/Hindware/ Parryware)

S & F in repair plastic water closet seat cover white, closed pattern with flat bottom and mild steel chromium plated hinging device complete all as directed and as specified.

S&F in repair Urinal Spreader of CP White colour fixing to 15 mm bore pipe.

S & F in repair 15mm bore Pillar cock Swan neck spoout and aertor for WHB complete all as specified & directed. Make : Cera Cat No: F1099104 or equivalent in Jaquar / Marc/ Kohler)

S & F in repair of PVC low level flushing cistern 10 ltrs capacity incl PVC float valves, PVC connection and out let pipes complete.

S & F in repair 15 mm Quarter turn basin mixer without Popup waste system with 357mm Long braded hoses of make Jaquar cat part No-ALI-85001 or equivalent in Marc/ Kohler for fixing hot & cold waterscrewed down for iron pipe and fixed all as specified and as directed.

S & F in repair of repair fancy type angle valve make of Jaquar or equivalent in Marc/ Kohler copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions chromium plated of size 15 mm. all as specified

S & F in repair of Quarter turn Bib tap make of Jaquar cat part No ALI-85037 or equivalent in Marc/ Kohler with wall flange for iron pipe of size 15mm bore chromium plated. all as specified

S & F in repair 2 in 1 Angle Valve 15 mm CP fancy pattern type cast copper alloy make of jaquar or equivalent in Marc/ Kohler screwed for iron pipe or for brass ferrule and fixed all as specified and as directed.

S & F in repair brass CP hand spray (health facucet with 1.5 M long easy flex tube in chrome finish and wall hook) make of Jaquar or equivalent in Marc/ Kohler complete all as specified and directed.

S & F in repair of SS chromium plated jet for WC with 1.00 M long pipe including necessary fittings complete all as specified and directed.

Dismantling water tanks exc 250 & n exc 500 ltr capacity and removing to store

S&F 500 ltr Rotational moulded Polyethylene water storag tank three layered (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F in repair 20mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms)

S&F in repair Corrugated Waste Pipe 32 mm dia for WHB//Sinkcomplete all as specified and directed. (Make : Prayag Cat No 327 or equivalent in Polytuf/ Jindal Polymer).

S&F in repair Waste coupling 32mm bore dia of PTMT half threaded for WHB/Sink complete all as specified and directed. (Make: Jaquar / Marc/ Kohler)

S & F in repair of Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges aluminium anodized, fixed with rawl plugs. all as specified.

S & F in repair 600mm Long PVC connection suitable for 15mm bore pipes complete all as specified and as directed.

Disconnecting existing tanks, setting aside for repairs including cleaning and removing all scale and dirt, etc from tanks and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

S&F in repair corner Glass Shelf 300mm (with brass brackets) complete all as specified and directed. (Make : Prayag Cat No : BEA-44 or equivalent in Jaquar / Marc/ Kohler)

S&F in repair CP Soap Dish including chromium plated brass screws and plastic cleats complete all as specified and directed. (Make : Prayag Cat No : BA-05 or equivalent in Jaquar / Marc/ Kohler)

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed.

M&L for One coats of synthetic enamel paint on old wooden Surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of Red oxide primer on new Steel Surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed.

M&L for One coats of synthetic enamel paint on old Steel Surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed.

M & L for complete removal of existing treatment from old decorated wall surface by scrapping by electrically operated grinder machine/electric regmal machine, applying one coat of 2mm thick wall care putty then scrubbing by sand paper to prepare a even surface and applying interior primer followed by applying two coats of OBD of any colour complete all as directed.

M & L for preparing the old surface of ceiling by washing down and rubbing and removing all loose layers of old treatment, efflorescence , soot and moss by wire brush and filling all nail holes and patches with cement wall putty, applying one or more coat of oil bound distemper on patches to bring the whole surface at par and applying one coat of oil bound distemper complete all as specified and directed.

M & L for complete removal of existing treatment from old decorated wall surface by scrapping by electrically operated grinder machine/electric regmal machine and applying primer with applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm. (Note: quoted rates shall deemed included painting at any height including scaffolding work, as required. )

Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal to store

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store

Refixing old 25mm bore steel tubing and connections in new or old position (Walls, ceiling, floors, etc.complete.

Refixing old 20 mm bore steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete.

S & F 25 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S & F 20 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S & F 15 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair PEG Set 6 (Zinc) complete all as specified and directed.

Supply & fix in replacement 125mm dia chromium plated gratings over nahani / floor traps including embedded the same in white cement to match complete all as specified and directed.

Dismantling of PVC pipes & fitting of any description & position up to 100 mm dia complete all as specified & directed.

PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to walls

S&F PVC (SWR) 75 mm bore pipe single socketed, in any length with rubber ring jointes , laid in trenches or in floor complete all as specified and directed.

S&F PVC (SWR) 110 bore pipe single socketed, in any length with rubber ring jointes , laid in trenches or in floor complete all as specified and directed.

S&F PVC (SWR) 110 bore pipe single socketed, in any length with rubber ring jointes ,fixed to wall complete all as specified and directed.

S&F PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement complete

S & F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

S&F in 75mm bore PVC (SWR) vent cowl

S & F SS clamps heavy duty of 25 mmx 3 mm thick fixed by 8mm fastener for fixing PVC Pipe of 75 mm bore to wall or roof copletet all as specified and directed.

S & F SS clamps heavy duty of 25 mmx3 mm thick fixed by 8mm fastener for fixing PVC Pipe of 100 mm bore to wall or roof copletet all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and directed

M & L for brick work with sub-class B brick straight or curved on plan built in cement mortar 1 : 6 complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) and disposal of all bldg Materials to out side MOD land as per NGT guide line complete all as specified & directed.

M&L 75 mm thick PCC 1:3:6, type C1, using (20mm graded aggregate) as in Plinth protection and finished the surface fair & even without using extra cement, laid in panel , including filling the joints with sand mixed with bitumen in 1:1 ration complete all as specified and directed.

M&L cement concrete 1:2:4 type B0 (using 12.5mm g raded aggregate) as in copings apex stones, bed plates kerbstone in benching all as specified and as directed.

M & L 75mm thick PCC type D2 1:4:8 Using 40mm graded stone aggregate as in sub base complete all as specified and as directed

M&L PCC 1:3:6 type C2 ( using 40 mm graded stone aggregate) as in surfaces channels,drains etc.

S&F in repair 100mm thick factory made SFRC manhole/ drain covers of approved shape & size complete all as specified and as directed.

M&L for guniting of spalled/corroded reinforced cement concrete surface,i.e column, beam, slab, chajja, comprising of chipping of spalled and loose concrete, cleaning rust form reinforcement by sand blasting, scrubbing down concrete surface with wire brushes, cleaning with water; allowed to dry and applying a layer antirust chemical of fosroc or equivalent on all exposed reinforcment followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited; applying two layers of guniting over steel welded wire mesh having 5mm dia of wire and aparture 50mm, total thickness of gunite not exceeding 60mm thick (average thickness) in cement mortar 1:2 using OPC 43 grade weight cement duly mixed with polycrete admixture @ 2% by weight of cement or as per manufacturer's instruction and finally applying cement plaster over guinite surface of required thickness to give even uniform and smooth finish conforming to proper geometrics in cement mortar 1:3 to match with the existing suface as in sides and soffits etc of slabs, chajjas,fins. fascias, parapets,lintels,columns& beams etc with and including necessary scaffolding, shuttering, chases to brick work or RCC members etc, complete all as specifed and all as directed. Note-GI wire shall be insert into RCC member by doing hole then inject HILTIHIT RE 500 into the hole before guniting.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/wall paneling, blankets, any thickness, including cover fillets and frame complete.

M&L Solid PVC Wall Panelling consisting of 5 mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed by Engineer -in-Charge

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) With Semi perforated 12mm thick micro tegular edged GRG false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling 8225:1987, Noncombustible as per BS4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter?locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main?T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L?shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge

M&L for One coats of synthetic enamel paint on old Concrete Surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame acomplete all as specified and directed.

Akhil Enterprises (BID ID -3259190)

M/S Rohit Enterprises (BID ID -3258919)

MAA SANTOSHI ENTERPRISES (BID ID -3259140)

VIJAY KUMAR GUPTA (BID ID -3264969)

sony engineering works (BID ID -3264506)