REPAIR AND MAINTENANCE OF STEEL AND WOODEN FURNITURE AT OFFICE COMPLEX, DSC LINE, DSC QUARTERS, SERVICE OFFICER MESS AND KPR OF SQAE (A), KANPUR UNDER GE(I) (P) (FY) KANPUR.

Amount

TABLE WRITING ( Table Office Clerk) FD - 381, 249, 275

Supply and fixing in replacement top of 18mm thick pre-laminated particle board of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all round including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

Supply and fixing in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

Supply and fixing in replacement of side stiffner made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

Supply and fixing in replacement of centre stiffner made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in Charge.

Supply and fixing in replacement drawer made out of 12 mm thick teak wood plank and 6 mm thick ply at bottom and back as per existing size and pattern complete all as specified, shown on drawing and as directed by Engineer-in- Charge

Supply and fixing in replacement shutter made out of 18 mm thick prelaminated particle board as per existing size and pattern complete all as specified, shown on drawing and as directed by Engineer-in- charge

Supply and fixing in replacement side and back ply made out of 6 mm thick ply as per existing size and pattern complete all as specified, shown on drawing and as directed by Engineer-in- Charge

M&L French Polishing to Table writing of any description width of girth including cleaning and preparing the surface for the articles of table writing complete all as specified, shown on drwingand as directed by Engineer-In-Charge

SOFA SET FIVE SEATER (3 + 1 + 1) FD- 281 & 373

Supply and fixing in replacement of arm made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in-Charge.

Supply and fixing in replacement of front leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in Charge.

Supply and fixing in replacement of rear leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

Supply and fixing in replacement of front long rail of three seater made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

Supply and fixing in replacement of front long rail of single seater made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

Supply and fixing in replacement of foam 40 density 100 mm thick (Make: Sleep Well) and including covering with tapestry cloth not less than Rs. 450/- per metre of width 1.2 Mtr complete all as per drawing and as directed.

M&L French Polishing to Sofa set Five Seate of any description width of girth including cleaning and preparation of the surfaceto match with the existing complete all as specified, as shown on drawing and as directed by Engineer-In-Charge.

CHAIR WRITING FD – 280

Supply & fixing in replacement of front legs of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

Supply & fixing in replacement of rear legs of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

Supply & fixing in replacement of side /front /rear rail of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

Supply & fixing in replacement of arm rest of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

Supply & fixing in replacement of stiffener of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

Supply & fixing in replacement of back rest of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

M&L French Polishing to Chair Writing of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engineer-In-Charge

RE-CANNING OF CHAIRS

Taking down old cane from the all type of chairs and re-canning with 2 to 2.5 mm wide half round new plastic cane in Godrej pattern with 3 strands in two in central holes both way (in place of two in other holes using minimum weight of cane mentioned below and complete all as per drawing and as directed :- Chair Easy (FD-229)

Taking down old cane from the all type of chairs and re-canning with 2 to 2.5 mm wide half round new plastic cane in Godrej pattern with 3 strands in two in central holes both way (in place of two in other holes using minimum weight of cane mentioned below and complete all as per drawing and as directed :- Chair Dining/CBB (FD-279)

Taking down old cane from the all type of chairs and re-canning with 2 to 2.5 mm wide half round new plastic cane in Godrej pattern with 3 strands in two in central holes both way (in place of two in other holes using minimum weight of cane mentioned below and complete all as per drawing and as directed :- Chair Writing (FD-280)

CHAIR STEEL TUBULAR WITH ARMS

Taking out U/S seat from chair tubular steel with arms and Supply & fixing of seat made off 2nd class hard wood MP Teak frame, canned with plastic cane half round 2 to 2.5 mm wide and border with 3mm wide plastic cane (weaving shall be in Godrej Pattern) fixed with new screws including painting all as shown on drawing and as directed. FD-75 (M)

Taking out U/S back from chair tubular steel with arms and Supply& fixing of back made off 2nd class hard wood MP Teak frame, canned with plastic cane half round 2 to 2.5 mm wide and border with 3 mm wide plastic cane (weaving shall be in Godrej Pattern) fixed with new screws including painting all as shown on drawing and as directed. FD-75 (M)

M&L welding in repair not exceeding 2.5 cm in length complete all as specified and as directed. FD-75 (M)

Taking out U/S flat iron from chair tubular steel with arms and Supply & fixing new flat iron 20mm x 4mm x 425 mm long welded at bottom /back of chair complete all as shown in drawing and as directed. FD-75 (M)

Taking out U/S hand rest from chair tubular steel and Supply & fixing new hand rest made off 2nd class hard wood MP Teak of size 50mm x 25mm, 450mm long duly Polished in black colour and fixed with new screws complete all as shown in drawing and as directed. FD-75 (M)

Taking Out U/S PVC Cap from chair tubular steel with arms and Supply and fixing new PVC Cap from top side of chair tubular complete all as shown in drawing and as directed. FD-75 (M)

ALMIRAH LARGE STEEL WITH SHELVES

Replacement of old existing broken /UNSV locks of any description and in any position with S & F New locks,made off Mild Steel of Godrej pattern, heavy duty having 6 lever with double keys fixing with suitable nuts including repair of locking device complete all as specified and as directed by engineer-in-charge. All as shown in drg FD-67 &1031

Replacement of old existing broken /UNSV door handles of Almirah 100 mm long CI chromium plated of approved make complete with nuts & pins all as specified and as directed by engineer-in-charge. All as shown in drg . FD-67 &1031

Replacement of old existing broken damaged legs of almirah large with S & F of new legs made out of 1mm M S sheet duly welded, complete all as specified and shown on drg all as directed by engineer- in- charge. FD-67 &1031

Taking out U/S steel clamps and S&F new steel clamps including fixing of loose shelves as directed by Engr-in-charge. FD-67 &1031

Replacement of damaged /broken locking assembly with 8 mm rod and S&F of new 8 mm rod round steel all as specified and shown on drawing and to be painted with approved synthetic enamel paint finish to be required shade all as directed by Engineer-in-charge FD-67 &1031

Replacement of damaged broken doors/ shutters of almirah large steel with new shutters with existing size & pattern including provision of locks, locking device and handle as per drg complete all as specified and as directed by engineer- in- charge FD-67 &1031

Preparation of the existing, decorated surfaces of the almirah large steel with shelves by removing of all dents and filling with putty and spray painting of approved synthetic enamel paint of (Internal and External ) complete all as specified and as directed by engineer-in-charge. FD-67 &1031

Replacement of old damaged /UNSV Shelves of Almirah large with S & F of new 1 mm M S sheet thick complete and with suitable clamps all as specified and shown on drg and to be painted with synthetic enamel paint finish to be required shade all as directed by Engineer-in-charge FD-67 &1031

M&L welding in repair not exceeding 2.5 cm in length complete all as specified and as directed. FD-67 &1031

ALMIRAH MEDIUM STEEL WITH SHELVES

Replacement of old existing broken /UNSV locks of any description and in any position with S & F New locks,made off Mild Steel of Godrej pattern, heavy duty having 6 lever with double keys fixing with suitable nuts including repair of locking device complete all as specified and as directed by engineer-in-charge. All as shown in drg FD-67, 1032

Replacement of old existing broken /UNSV door handles of Almirah medium steel 100 mm long CI chromium plated of approved make complete with nuts & pins all as specified and as directed by engineer-in-charge. All as shown in drg .FD-67, 1032

Replacement of old existing broken damaged legs of almirah medium steel with S & F of new legs made out of 1mm M S sheet, duly welded complete all as specified and shown on drg and as directed by engineer- in- charge. FD-67, 1032

Taking out U/S steel clamps and S&F new steel clamps including fixing of loose shelves as directed by Engr-in-charge.FD-67, 1032

Replacement of damaged /broken locking assembly with 8 mm rod of almirah medium steel and S & F of new 8 mm round MS rod all as specified and as shown on drawing and to be painted with approved synthetic enamel paint finish to be required shade all as directed by Engineer-in-charge. FD-67, 1032

Replacement of damaged broken door /shutters of almirah medium steel with new shutters of existing size and shape of MS sheet 1 mm thick, including provision locks, locking device and handle as per drg complete all as specified and as directed by Engineer- in- charge.FD-67, 1032

Preparation of the existing, decorated surfaces of the almirah medium steel with shelves by removing of all dents and filling with putty and spray painting with approved synthetic enamel paint of approved quality ( Internal and External ) complete all as specified and as directed by engineer-in-charge. FD-67, 1032

Replacement of old damaged /UNSV Shelves of Almirah medium steel with S&F of new 1 mm thick MS Sheet complete and with suitable clamps all as specified and shown on drg and to be painted with synthetic enamel paint finish to be required shade all as directed by Engineer-in-charge. FD-67, 1032

M&L welding in repair not exceeding 2.5 cm in length complete all as specified and as directed.FD-67, 1032

CHARPOY GI PIPE

Removing unserviceable plywood 12mm thick / newar from conversaion of charpoy GI to hard bed, S&F Commercial plywood of size 1980mm x 900mm x 12mm thick BWR grade in one piece with 10 Nos of semi circular top bolt of 6mm dia 75 mm long and nut with galvanised steel washers to be used for fixing of plywood top including drilling holes & following arrangements complete all as specified and shown on Drg No CEJZ/SKD/413. (a) S & F 4 Nos 25 mm suare MS hollow tube 16 gauge wall thickness of length not less than 28 CMS each welded with fillet weld all around 3mm thick to GI pipe charpoy at corner to support plywood all as shown on drawing. (b) S & F 2 Nos 25mm square MS hollow tube 16 gauge wall thickness of length not less than 83.6 cms each welded with fillet weld all around 3mm thick to long rails of GI pipe charpoy at equal space to support plywood all as shown on drawing. Note :- (i) All steel section except GI articles and adjoining surfaces of GI pipe which shall be degalvanised during welding of MS hollow pipe shall be painted with two coats of synyhetic enamel paint over coat of red oxide primer. (ii) all the corners of plywood shall be rounded same as per shape of corner elbows of charpoy. (iii) The bolts for fixing of plywood shall be counter sunk type and top of bolt (head) shall be flushed with ply top & finished with suitable filling. FD-220 ,CEJZ/SKD/413

Removing of existing broken long rails from charpoy GI Pipe and cutting and threading the same as one short rail and one leg and fixing in the existing charpoy GI where required complete all as specified and as directed. FD-220 ,CEJZ/SKD/413

Removing of existing broken/ unserviceable 32 mm hexagonal check nut and S & F of new 32 mm hexagonal GI check nuts all as specified and as directed by Engineer-in-Charge. FD-220 ,CEJZ/SKD/413

Removing of existing broken short rails of charpoy GI pipe cutting and threading the same as one leg and fixing in the existing charpoys complete all as specified and as directed by Engineer-in-Charge.FD-220 ,CEJZ/SKD/413

S & F of new long rails for charpoy GI pipe 32 mm dia medium grade with ISI Marked Complete all as specified and as directed by Engineer-in-Charge. FD-220 ,CEJZ/SKD/413

Removing of existing broken /UNSV GI elbow 32mm three way from the charpoy GI complete and fixing new GI elbow 32mm three way whereever is required complete all as specified and as directed by Engineer-in-Charge. FD-220 ,CEJZ/SKD/413

CHAIR WRITING STEELS

Replacement of old existing damaged/ UNSV seat of chair writing steel and S&F new 12mm thick hot pressed plywood upholsted with fabric and moulded foam of 50mm thick with 50 density existing size & shape Including painting complete all as specified and as shown in drawing as directed. Pattern- Tread Pattern

Replacement of old existing damaged/ UNSV seat tapestry cloth of chair writing steel and S&F new tapestry cloth existing size & shape Including painting complete all as specified and as shown in drawing as directed. Pattern- Tread Pattern

Replacement of old existing damaged/ UNSV back of chair writing steel and S&F new 12 mm thick hot pressed plywood upholsted with fabric and moulded foam of 50mm thick with 50 density existing size & shape including paint complete all as specified and as shown in drawing as directed. Pattern- Tread Pattern

Replacement of old existing damaged/ UNSV back tapestry cloth of chair writing steel and S&F new tapestry cloth existing size & shape Including painting complete all as specified and as shown in drawing as directed. Pattern- Tread Pattern

TABLE OFFICE OFFRS STEEL S/TOP SIZE 1800 X 900 X 760 MM

M&L welding in repair not exceeding 2.5 cm in length complete all as specified and as directed. FD-1003

Replacement of old existing broken /UNSV locks of any description and in any position with S & F New locks, made off Mild Steel of Godrej pattern, heavy duty having 6 lever with double keys fixing with suitable nuts complete all as specified, as shown in drawing and as directed by engineer-in-charge. FD-1003

Replacement of old existing damaged/ UNSV top of table office officer and Supply and fixing new top of 18 mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade of size 1800 mm x 900 mm, one side with shade as approved and balancing white with 4 mm thick teak wood beading (Half Round) all round including polishing & Painting of table to match with the existing complete all as per drawing and as directed. FD-1003

Preparation of the existing, decorated surfaces of the Table writing steel with drawer by removing of all dents and filling with putty and spray painting with two coats synthetic enamel O G paint of approved quality complete all as specified and directed by engineer-in-charge. FD-1003

CHAIR VARANDAH STEEL

Supply and fixing in replacement of PVC toe to the legs complete all as specified, as directed and as shown on drawing. FD-256, FD-19

Taking out existing unserviceable cane plastic including preparation of old surfaces and applying one coat of synthetic enamel paint (White) and re-canning with new plastic cane 4 mm wide half round of best quality in matt pattern complete all as specified, as shown in drawing and as directed by Engr-in charge. FD-256, FD-19

TABLE WRITING STEEL

Replacement of old existing broken /UNSV locks of any description and in any position with S & F New locks, made off Mild Steel of Godrej pattern, heavy duty having 6 lever with double keys fixing with suitable nuts complete all as specified and as directed by Engineer-in-charge. All as shown in drg. FD-381

Denting and welding of dislocated portion of Table office clerk steel where ever as required and readjusting of the frame complete as per drawing including repair of drawers where as required all as directed by Engineer-in-charge. FD-381

Replacement of old existing damaged/ UNSV top of table office clerk steel and Supply and fixing new top of 18 mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade of size 1219 mm x 711 mm, one side with shade as approved and balancing white with 4 mm thick teak wood beading ( Half round) all round including polishing & Painting of table to match with the existing complete all as per drawing and as directed. FD-381

Preparation of the existing, decorated surfaces of the Table office clerk steel with drawers by removing of all dents and filling with putty and spray painting with synthetic enamel paint (Internal & External) of approved quality complete all as specified and as directed by Engineer-in-charge. FD-381

RACK ADJUSTABLE STEEL

Replacement of old existing broken/ damaged /UNSV shelves of rack adjustable 6 tier steel and Supplying and fixing new shelves made out of 1.00 mm thick MS sheet bent to shape of size 760mm x 500mm as shown in drawing including applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and as directed.Pattern- Tread Pattern

Supplying and fixing in replacement of defective nuts and bolts including washers as required all as shown on drawing complete all as specified and as directed.Pattern- Tread Pattern

M&L welding in repair not exceeding 2.5 cm in length complete all as specified and as directed. Pattern- Tread Pattern

Preparation of the existing, decorated surfaces of the Rack Adjustable 6 Tier steel by removing of all dents and filling with putty and spray painting with two coats of synthetic enamel paint (Internal & External) of approved shade & quality complete all as specified and directed by engineer-in-charge. Pattern- Tread Pattern

Chair Computer

Replacement of old existing damaged/ UNSV seat of chair computer and S&F new 12 mm thick hot pressed plywood upholsted with polyproylene/ polyster fabric and moulded foam of 50mm thick with 50 density existing size & shape complete all as specified and as shown in drawing as directed. Pattern- Tread Pattern

Replacement of old existing damaged/ UNSV back of chair Computer and S&F new 12mm thick hot pressed plywood upholsted with polyproylene/ polyster fabric and moulded foam of 50mm thick with 50 density existing size & shape including painting complete all as specified and as shown in drawing as directed. Pattern- Tread Pattern

Replacement of old existing damaged/ UNSV seat polyproylene/ polyster fabric of chair computer and S&F new polyproylene/ polyster fabric existing size & shape Including painting complete all as specified and as shown in drawing as directed. Pattern- Tread Pattern

Replacement of old existing damaged/ UNSV back polyproylene/ polyster fabric of chair computer and S&F new polyproylene/ polyster fabric existing size & shape complete all as specified and as shown in drawing as directed. Pattern- Tread Pattern

Replacement of old existing damaged/ UNSV arm rest of chair computer and S&F new arm rest made of polyurethane with hardness and re-inforced with MS insert and shall be scratch and weather resistant existing size & shape complete all as specified and as shown in drawing as directed. Pattern- Tread Pattern

Supply and fixing in replacement of 50 mm Dia swivel type Castors roll of chair computer complete all as specified, shown on drawing and as directed by Engineer-in-charge.Pattern- Tread Pattern

Taking out U/S base from chair Computer and S& F new base as existing trade pattern and making the chair functional complete all as directed.Pattern- Tread Pattern

Taking out U/S Cylender from chair Computer and S& F new Cylender as existing trade pattern and making the chair functional complete all as directed.Pattern- Tread Pattern

Lalta Prasad vijay kumar Forwarding Agency