CERTAIN BR REPAIRS TO OTM MD ACCN UNITS OF A AND OFFRS MESS OF B C D AND F AND PERIODICAL SERVICES TO CERTAIN BLDGS OF UNIT AF AM AP B ZONE L COMPLEX BSO YARD N A ZONE SDP (OLD BUTCHERY) P T AND H ETC UNDER AGE BR I OF GE (WEST) FEROZEPUR CANTT

Amount

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified and directed.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm each and removing from site.

Taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm each and refixing in the same opening complete all as specified and directed.

S&F for pressed steel frames made of 1.25mm thick MS sheet of profile 105mmx60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

S&F for pressed steel frames made of 1.25mm thick MS sheet of profile 125mmx60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

S&F 35mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat complete all as specified and directed.

S&F 35mm thick second class hard wood, Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, sizes of members of shutters as specified in SSR part-I section 8 clause 8.24 supplied and fitted to chowkats complete all as specified and directed.

M&L PCC 1:3:6), type C-1 (using 20mm graded stone aggregate) as in filling of steel chowkhats complete all as specified and directed.

S&F powder coated anodised aluminium door, window , ventilator frame including shutter etc fixed / sliding or pull and push type in shutter frames or shutters with two/three track sliding aluminium frame of approved size with power coating any colour minimum thickness 50 micron including necessary joining cleats, glazing clips, powder coated aluminium snap beading, screws etc including taking down complete all as specified as per manufacturers instructions. Note: Glass Pane and EPDM Rubber beading/gasket will be measured and paid for seperatley.

S&F EPDM Rubber beading around glass in aluminium windows /ventilator shutters complete all as specified and directed.

S&F aluminium decogrill 10mm thick with necessary channels and clips, DG, 104 complete all as specified and directed.

S&F solar control film 25 micron reflective type sticked to glass panes as per manufacturers instruction complete all as specified and directed.

S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and as directed.

M&L 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work complete all as specified and directed.

S&F 150mm long aluminium, anodised barrel tower bolts of extruded section, complete all as specified and directed.

S&F 125mm Extruded aluminium alloy handle complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F butt hinges 100mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and directed.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.

S&F 4 lever aluminium mortice lock, vertical type size 100 mm complete all as specified and directed.

S&F hydraulically regulated extruded aluminium body door closer designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg etc complete all as speciified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in floor complete all as speciifed and directed.

S&F 300 mm,ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 250mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified and directed.

S&F Mild steel pressed handle, oval type, 150 mm size, stove enameled black and fixed with steel screws, complete all as specified and directed.

S&F 200mm long MS barrel tower bolts stone enamelled black with bright bolt complete all as specified and directed.

S&F Factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F Factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F 3 mm thick ordinary quality sheet sheet glass glazing with oil putty and glazing clips fixed complete to wooden/Steel window not exc 0.5 sqm in each pane complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing as per specification complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.

S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed.

Dismantling of boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F 18mm Solid PVC board plain colour,fixed with screws or adhesive with complete accessaries as in shelves with rebates fixed on PVC solid pattern of size 40mmX18mmX500mm on three sides complete all as specified and directed.

S&F 20mm Solid PVC board plain colour,fixed with screws or adhesive with complete accessaries as in shutters complete all as specified and directed.

S&F Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified.

Demolition of cement concrete in sunken portion of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L 15mm thick cement mortar 1:3 with WPC on walls as well as on sunken floor portion finished even and smooth without using extra cement. Note:- WPC shall be measured and paid for separately.

M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and directed.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric(wt. not less than 150 gms/sqm)land on primed surface by forced apllicationcomplete all as specified and directed.

M&L PCC 1:5:10, type E2 (using 40mm graded aggregate) in filling under sunken floor portion complete all as specified and directed.

M&L 30mm thick PCC 1:2:4, type B-1 (using 20mm graded aggregate) as in floor finished even and rough to receive top layer complete all as specified and directed.

Supply only water proofing compound.

Demoltion of brick work built in cement mortar of any specification and in any position complete all as specified and directed.

M&L brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed.

All as per Srl item 51 here-in-before but using old bricks retrieved from demolition under item 50 here in before including cleaning and removal of mortar from old bricks.

Taking down of cement mortar plaster of any description and preparation of surfaces for receiving new plaster including racking out of joints complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:4 on any face of brick wall or concrete surfaces, finished fair and even complete all as specified and directed.

M&L rendering 10mm thick in cement mortar 1:6 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L 5mm thick rendering in cement mortar 1:3 on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and directed.

Dismantling of floor hearth and wall tiling incl mortar beding and throw rubbish out the premises complete all as specified and directed.

M&L Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar 1:6 and pointed in white cement with pigment to match the colour of tiles ccomplete all as specified and directed.

M&L Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting set and jointed in neat cement slurry over and including 10mm thick rendering in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

S&F Vitrified ceramic tiles 10mm thick (Square/rectangular)polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade)cement to match over and including 20 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L light shade Vitrified tile 10mm thick polished, area of tile not exceeding.0.36 sqm as in Skirting set and jointed in cement slurry over and including 10mm thick rendering in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L glazed coloured designer ceramic tiles of size 450mmx350mmx6mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid bedded and pointed in any mortar complete all as specified and directed.

M&L Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over & including 15mm thick screed in cement mortar 1:4 with pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L 16-18mm thick coloured marble slab of size not less than 1 Sqm each, machine cut as in cooking platform or in any position, set and bedded in gray cement slurry over & including 15mm thick screed in cement mortar 1:4 and pointed in white cement with admixture of pigment to match the shade of marble including cutting, polishing (mirror type) complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over 20 mm cement screed base cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing complete all as specified and directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick rendering in cement mortar 1:4 and jointed completer all as per Srl item No 66 here-in-before.

S&F 16 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed complete to walls and ceilings or laid in floors including fitting like elbow, reducer, tee, union, nipple etc incl taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation,complete all as specified and directed.

S&F 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed complete to walls and ceilings or laid in floors including fitting like elbow, reducer, tee, union, nipple etc incl taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation,complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6, type C-2 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.

M&L chequered cement concrete tiles 20cm x 20cm & 25mm thick, set, jointed and pointed in neat cement slurry in floors as in floor set and jointed in neat cement slurry over and including 20mm thick screed in cement mortar 1:6 and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L 60mm thick coloured interlocking (M-35) cement concrete tiles with grey cement and pigment of approved design & pattern as approved by GE. Complete all as speciifed and directed. Makes:- SITCO, POOJA CONCRETE, MOHINDRA INDUSTRIES, KB SPUN, SARAL IMPEX, RANA TILES CO, SHINO TILES, RN TILES & PAVERS, SWASTIK ALW

M&L fine sand bed under paver block, complete all as specified and directed.

M&L for 75mm thick, plain cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base of floors finishes complete all as complete all as specified and directed.

M&L hardcore of broken bricks of guage exceeding 63mm but not exceeding 100 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L plain cement concrete 1:2:4, type B -1(using 20mm graded stone aggregate) all around the interlocking tiles to fix in position as in kerbs complete all as specified and directed.

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S& F in repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gm) complete all as specified and directed.

S& F in repair Bib tap of cast copper alloy brass but fency type, Chromium plated 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified and directed.

S & F 500 Ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Parts & dismantling existing water storage tank, complete all as specified and directed.

S&F 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) and fixed complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves 20mm dia bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F Mild steel curtain rod powder coated with fixing side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified and directed.

S&F in repair 15mm stop cock/angle cock cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with fancy shank and cup complete all as specified and directed.

S&F PVC Connection pipe, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and directed.

S&F in repairs PVC waste pipe with waste fittings, 32 mm bore size for sinks,WHB etc with long screwed shanks and fly nuts complete all as specified and directed.

S&F 125mm dia PTMT grating fixed over trap with cement as in repair complete all as specified and directed.

S&F 600mm long towel rail of PTMT fixed to wall with steel screws and PVC rawl plug as in repaircomplete all as specified and directed.

S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 110 mm bore PVC (SWR) 'P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified and directed.

S&F Vitreous china white wash down water closet (pedestal pattern) including PVC seat cover and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified and directed.

S&F in repair one piece vitreous china wash down water closet pan( pedestal pattern) white/coloured cascade type 640x360x690(monolithic flush cistern type) single piece wc with PP seat cover,Hinges fixing accessories set including flush cistern with S-Trap of size 220mm all as per manufacturing instructions complete all as specified and directed.

S&F in repair wall hung vanity type wash hand basin cabinet of size 805mmx450mm with wash basin(white) complete all as specified and directed.

S&F in repairs Health Faucet (ABS body) with 8mm dia 1.00m long flexible tube (PVC/Stainless steel coated) and wall hook complete all as specified and directed.

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified.

S&F Wash hand basin, flat back 550mmx400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.

S&F Vitreous China bowl urinal flat back, size of 465mmx355mmx265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, and flush pipe ) including waste pipe 32mm dia bore fixed in repairs complete all as specified and directed.

S&F stainless steel sink with drainage board made of of 1.00mm thick sheet for kitchen with plugs washers38/40mm dia PVC waste pipe and including 38/40mm dia CP waste coupling fixing with cast iron cantilever brackets and connecting union to pipe over all size 915mmX460mm bowl size 410mmX330mmX160mm fixed in repairs complete all as specified and directed.

S&F in repair chromium plated shower rose 125mm size with or without swivel joint for fixing in 15mm dia pipe complete all as specified and directed.

Dismantling CI pipe alongwith fittings of 50/75/100mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified and directed.

Taking down eaves gutters and rainwater pipes(any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc, including cleaning or refixing (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, fixed to wall including distance pieces and stack clamp with nuts & bolts complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110mm bore, PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes (pressure rating not less than 4 Kg/cm2) single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F 75mm bore, PVC (SWR) bends any radius complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M&L Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & II complete all as specified and directed.

M&L fixing of Gypsum Board 6 to 7mm thick in ceiling fixed with screw 60cmx60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) incl aluminium anodised snap grid frame 605mmX605mm for false ceiling incl hanging arrangement complete all as specified and directed.

Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered by complete all as specified and directed.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified.Note:-Demolition of mud phuska to be cut in avg thickness from top surface of roof for create the slope complete all as specified and directed.

Removing mud phuska/soil material exceeding 250 m but not exceeding 500 m and depositing where directed complete all as specified and directed.

M&L brushing neat cement slurry with 3 kg of cement per square metre complete all as specified and directed.

M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and directed.

M&L 10 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface complete all as specified and directed. Note: WPC shall be measured and paid for separately.

Supply only water proofing compound.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric(wt. not less than 150 gms/sqm)land on primed surface by forced apllication complete all as specified and directed.

M&L brick tiles 40mm thick laid on mud mortar (mud phuska) and joints grouted flush in cement mortar 1:3 mixed with 5% of cruide oil by weight of cement and pointed flush including leaping plaster complete all as specified and directed.

All as per Srl item No 123 here-in-before but except tiles

M&L App membrane to be finished with one coat of solar reflective bituminious based aluminium [email protected] kg per sqm complete all as specified and directed.

M & L Covet fillet in Plain Cement concrete 1:2:4, type B-0 (using 12.5mm graded stone aggregate) with min radius of 75mm tk as in roof and parapet wall junction, roof benching, kerbs, mud stop, coping, rounded or chamfered on edges, including necessary sloping on roof including form work complete all as specified and directed.

S&F in repair CP fency type Wall mixer 2 in-1,connecting legs and wall flange complete all as per manufacturer's instruction and as directed ccomplete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified.

S&F Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron/mild steel work in any position complete all as specified and directed.

S&F mild steel framed work such as grills/guard bars, cooler stand, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290(Gde-E-165) complete all as specified and directed.

S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe 410-W (Gde E-250) Quality 'A' including fabrication, erraction and fixing complete all as specified and directed.

S&F Rolled sections as in post/pilllars where connected with angle cleats or other connecting plates etc,of Fe 410-W(Gde E-250) Quality 'B' including fabrication,erection and fixing complete all as specified and directed.

M&L Preparing new surfaces of wood and wood based surfaces of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L Preparing new surfaces of steel of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer complete all as specified and directed.

M&L Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L Preparation of newly plastered surfaces of walls & applying three coats of white wash complete all as specified and directed.

M&L Preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified and directed.

M&L preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices complete all as specified and directed.

M&L preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash to ceiling complete all complete all as specified and directed.

M&L washing rubbing down and stopping of distempered and painted surfacesand applying one coat of Oil Bound Distemper on wall surfaces including proper curing complete all as specified and directed.

M&L washing rubbing down and stopping of Cement based painted surface and applying one coat of cement based paint on wall surfaces including proper curing complete all as specified and directed.

M&L preparing old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Preparing old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:4 on any face of brick wall or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying two coats of white wash on walls including cornices complete all as specified and directed.

M&L preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of colour wash on walls including cornices complete all as specified and directed.

M&L preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying two coats of colour wash on walls including cornices complete all as specified and directed.

M&L complete removal of existing treatment and preparing old decorated surfaces (Plastered or unplastered) by brooming down or steel wire brushing scrapping down smoke soot,moulds moss and efflorescent salts and trading oil and greasy spots etc apply after finishing wall surface with birla wall care putty /JK wall care putty of 1 mm thickness to get fair finish on wall applying two coats of oil bound distempered over a coat of primer on plastered surfacescomplete all as specified and directed.

M&L washing rubbing down and stopping of emulsion painted surfaces and applying one coat of exterior weather proof acrylic paint of exterior grade including preparation of surfaces complete all as specified and directed.

M&L washing rubbing down and stopping of distempered and painted surface and applying one coat of comouflage paint on wall surfaces including proper curing complete all as specified and directed.

M&L complete removal of existing treatment on terra cotta floor surfaces like a pathway pavers Chequered, inlerlocking tile, roof tiles surfaces etc including necessary preparation of surfaces and applying two coats of expoxy exterior emulsion paint over a coat of primer complete all as specified and directed.

Karan Engineers (BID ID -3451434)

M/s Sham and Company (BID ID -3452203)

JAWAHAR CONSTRUCTION COMPANY (BID ID -3455119)

M/s Sarup Singh (BID ID -3452005)

M/s Bansi Lal (BID ID -3451567)

M/s Vishant Construction Co (BID ID -3451954)

RAKESH KUMAR SATISH KUMAR (BID ID -3453070)