CNB_KUTUBKHEDA

Item no.1: Excavation in all kinds of soil including boulders upto 0.60 m. diameter (0.113 cum) for canal, seating of embankment, filter drains/ catch water drains etc and placing excavated stuff neatly in dump area or for formation of service road/embenkment as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc. complete with leads as below and lifts as directed.

item no.2: Excavation in hard murum including boulders upto 0.60 m. diameter (0.113 cum.) for canal, seating of embankment, filter drains/ catch water drains etc. and placing excavated stuff neatly in dump area or formation of service road as directed including cost of all machinery, labour, dressing bed and sides to required level and profile etc complete with leads as below and lifts as directed.

Item no.3: Excavation in soft rock without blasting including boulders upto 0.60 m. diameter (0.113 cus) for canal seating of embankment, filter drains/ catch water drains etc. and placing excavated stuff neatly in dump area or for formation of service road as directed including cost of all machinery, labour, dressing bed and sides to required level and profile etc. with 1 km. lead and 6 m. lift.

Item no.4: Excavation in hard rock of all toughness by blasting including boulders above 0.60 m. diameter (0.113 cum.) minimising damage to sides slope of excavation in water prism area by adopting any one or combination of line drilling/pre-spliting/smooth blasting techniques and placing the excavated rock neatly in approved dump area as directed including cost of all machinery, labour, levelling bed etc. complete with leads as below and lifts as directed.

Item no.5: Providing laying rubble soling below foundation in layers including filling with rubble chips, murum etc, complete as directed

Item no.6: Providing and fixing in position TMT-FE-500 bar reinforcement steel of various diameter for R. C. C. pile, caps, footing, foundation, slabs, beams, columns, canopies, staircase, newels, chajjas, lintel, pardies, copings, fins, arches etc. as per detailed design, drawing and schedules. Including, bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete as directed

Item no.7: Providing and laying in situ cement concrete of grade M. 150 (40 MSA) of trap igranite gneiss Aquartzite graded metal for PCC with or without surface reainforcement RCC concreting requiring heavy of special type of shuttering for works of gallery, sluice, spilway crest, spilway down stream face, energy dissipating structurs, intake structurs, training walls, piers, abutment etc with batching plants and Transit mixer with shuttering and scaffolding curing etc completed with an initial lead 50 m.and lift 1.50 m.

Item no.08: Providing and fixing sill beams, RSJ 150 x 100 mm sizeas per detailed design and drawing including one coat of anticorrosive paint with two coats of oil paints etc completed with all leads and lifts as directed and as per specification

Item no.9: Providing and fixing M. S. channels 160 x 100 mm size fabricated from 8 mm. plate including fabrication with 12 mm. dia hooks of 50 cm in length including one coat of anticorrosive paint with two coats of oil paints etc. Complete with all leads and lifts as directed and as per specification

Item no.10: Providing and fixing in position M.S. Needles 2.12 x 0.50 mm size as per detailed design and drawing including two coat of anticorrosive paint with two coats of oil paints etc. complete with all leads and ifts as directed and as per specification

Item no.11: Back filling upto ground level behind the ground level behind the canal structures etc completed (without royalty) with suitable material of approved quality in layers not exceeding 20 cm. without disturbing the structure etc. completed.

Item no.13: Providing and constructing 230 mm thick dry rubble stone pitching with pin headers at 2 per sqm using stones and stone chips from approved sources including cost of all material, labour, hand packing/wedging stone chips, finishing etc.completed with lead upto 50 m and lifts as directed

Item no.14: Providing and fixing canal information board ofsize 1.20 x 0.75 m. prepared on 16 mm guage M. S. guage sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc cromite storing primer and two coats each of green/White back ground and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border/ letters/numeral arrows coated with non peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50 x 50 x 5 mm of 3.65 m long inflate at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of GI. bolts and nuts of size 10 mm dia and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement in M-15 block of size 60 x 60 x 75 cm as directed.

Insurance

Royalty