Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.5 LAccepted-AOC B 101 3RD FLOOR JHILMI COLONY DELHI 110095 | DELHI | EAST DELHI | DELHI | 110095 | L1 | Accepted-AOC Accepted due to L1 | |
| 2 | L2₹26.3 L+₹1.7 L (6.98%)Rejected-AOC | L2 | Rejected-AOC higher rate | |
| 3 | L3₹34.5 L+₹10.0 L (40.6%)Rejected-AOC | L3 | Rejected-AOC higher rate |
Tender Value
Refer Docs
EMD Value
₹56,000
Closing Date
2 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NEW DELHI
GE NEW DELHI
CA NO GE/ND-67/2022-23 ADDITION/ALTERATION TO MAIN GATE WITH SENTRY BOX FOR CHANAKYA BAGH CHANAKYAPURI AND PROVN OF COVERED SHELTER ALONGWITH ADDITION/ALTERATION TO ENTRANCE GATE WITH SENTRY BOX FOR PALAM BAGH UNDER GE NEW DELHI
2022_MES_560772_2
GE/ND-67/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE NEW DELHI
refer tender documents
7 documents required · 7 mandatory
₹500
GE NEW DELHI
₹56,000
Yes
31 Mar 2023
5 Dec 2022
4 Jan 2023
5 Dec 2022
2 Jan 2023
19 Dec 2022
Amount
Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc all as specified.
M&L brick work with sub class ‘B’ brick, straight or curved on plan exceeding 6m means radius in CM 1:6 with old size bricks.
Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished using wpc ( wpc to be paid measured and separately) even and smooth without using extra cement all as specified ( Externally)
Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement all as specified and directed.
M&L for 10mm thick cement plaster in CM 1:3 on bricks on concrete surfaces of ceiling finishing the surfaces even and smooth without using extra cement all as specified.
Supply only integral water proofing compound.
Preparing newly plastered surfaces of ceiling and applying three coats of white wash all as specified.
Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper coat of coat of wall putty 2 to 3mm thick on plastered surfaces preparatory to distempering on wall surface ..
Preparing newly plastered surfaces of walls and applying two coats of exterior emulsion paint (Apex) over a coat of primer and 2 to 3mm thick wall care putty.
Excavation in post holes (for similar holes) each n.exc. 0.5 cum, getting out, returning, filling in and ramming each of broken rubble mixed with earth around in layers not exc. 25cm, watering, and removing surplus soil to a distance n.exc. 50m and making good surface all as specified and directed.
M&L Cement concrete Type C-2 1:3:6 (using 40 mm graded aggregate) in foundations, filling and mass concrete all as specified.
Excavating in trenches, n. exc. 1.5 m wide and n. exc. 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n. exc. 10 sqm on plan and n.exc. 1.5 m in depth and getting out in any type of soil.
Returning filling in including spreading, levelling, watering and well ramming in layers n. exc. 25 CM in any type of soil.
Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above starting point in soils
M&L Cement concrete Type D-2 1:4:8 (using 40 mm graded aggregate) in foundations, filling and mass concrete all as specified.
M&L PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in copings, plinth course, damp proof course, bed blocks, benching, PCC cills and similar items.
S&F for 10 mm thick polycarbonate sheet of and colour having tensile as per manufacture instructions as in roof covering/cladding to wall fixed with self tapping screws as specified or as per manufacture instruction complete all as specified and directed.
M&L for Steel work in tubular trusses round or rectangular pipes including special shaped washer etc complete using ERW or induction butt welded tubes confirming IS complete all as specified and directed.
M&L for mild steel framed work as in trusses, purlins, rafters etc including cleats, and steel plates, wind ties complete all as specified and directed.
S&F Anodised aluminium frame powder coated (minimum thickness of powder coating 50 micron)for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed
S&F aluminium anodised powder coated window and ventilator shutters side hung type without sash bars, aluminium sections weighting 0.55 kg/m including necessary joining cleats, glazing clips rubber packing , aluminium snap beading screws anodised aluminium fittings such as peg stay 150mm long (1no) hinges type B-21 100 mm long 2 no's suitable handle 1 no's complete all as specified and directed.
S&F 5.5mm thick sheet glass ordinary quality and glazing with aluminium snap beading in square and fixed to aluminium sections all as specified and directed
Dismantling structural steel work including doors, gates but excluding framed truss etc.
Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete
M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wind ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0
M&L for Applying two coats of synthetic enamel paint on new steel surfaces any description, not otherwise described over 10 cm width or girth
Reinforced cement concrete 1:1.5:3 nominal mix, using 20mm crushed stone agg as in slab supported on walls, beams & columns in floors, roofs
Reinforced cement concrete 1:1.5:3 nominal mix, using 20mm crushed stone agg as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc. all as specified
Reinforced cement concrete 1:1.5:3 nominal mix, using 20mm crushed stone agg as in beams, roof beams, cantilevers, lintel over 1.5m span, bands, chajjas etc. all as specified
Reinforced cement concrete 1:1.5:3 nominal mix, using 20mm crushed stone agg as in columns etc. all as specified
Use and waste of form work to sides of concrete foundations footings base of columns, plinth beams ,raft and raft beams, sides and soffits of foundation all as specified.
Use and waste of form work to soffits of suspended slabs such as roof slabs, not exe 200mm thick, fair finished surfaces of concrete all as specified
Use and waste of form work to sides of pillars, columns all as specified.
Use and waste of form work to edges of concrete flats, treads breaks in floors, window cills, roof etc n exe 20 cm wide and sides RCC/PCC bands in wall, horizontal or sloping and similar work exe 5 cm but n exe 15 cm wide, fair finished surfaces of concrete all as specified
S & F for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not les than 0.9 mm dia or securing with clips. (annealed) not less than 0.9mm dia, complete.
Mild steel TMT bars (conforming to Fe 500/Fe 550) 6 to 8mm dia in stirrups cut to lengths bent to shape required including cranking bending and spirally hooping for columns hooking ends and binding with MS wire annealed n.less then 0.90mm dia complete all as specified and directed.
S&F standard anodised aluminium section for frame work for fixing ACP sheet cladding complete all as specified and directed.
S&F 3mm thick pre coated Aluminium Composite Panel cladding sheet of approved colour and shape, joint filled with silicon sealant, fixed as per manufacturers instruction complete all as specified and directed.
S&F stainless steel letters of font "Arial" or any other font as approved user in size 50cm x 30cm x 25mm thick made with 2mm thick stainless steel sheet matt finish fixed on composite panel faced wall with approved stainless steel screws and bolts for the letters "CHANAKYA BAGH NSB - I" or "PALAM BAGH, PALAM" as applicable in English complete all as specified and directed.
S&F stainless steel letters of font "Arial" or any other font as approved user in size 50cm x 30cm x 25mm thick made with 2mm thick stainless steel sheet matt finish fixed on composite panel faced wall with approved stainless steel screws and bolts for the letters "PALAM BAGH PALAM" in Hindi complete all as specified and directed.
M&L 20mm thick Granite (of any type and colour) work (table rubbed and polished) in jambs, pillars, and like in vertical surface in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10mm thick screed in CM 1:4 complete all as specified and directed.
M&L for Non skid ceramic coloured tiles 400mmx400mm x7mm thick as in floors, set and jointed with cement slurry and pointed with white or coloured cement to match with tiles over and including 15mm thick screed bed in cement mortar 1:6 complete.
M&L for Glazed ceramic coloured tiles 450x300mm x 6 to 7mm thick, as in patches in vertical surfaces such as dado, skirting, wall etc set & jointed in neat cement slurry and pointed with coloured cement to match with tiles in over and including 10mm thick cement plaster in cement mortar 1:4.
Demolition of cement concrete (unreinforced) in ground floors and paving not exc. 15cm thickness.
M & L for cement conc type D2 1:4:8 (40mm graded aggregate) 75mm thick complete all as specified
M & L Sand for 50 mm thick filling under interlocking paver block including watering and consolidation complete all as specified
M&L for Machine pressed precast concrete interlocking paver block with ceramic/glossy finish any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade
M/S SONU ENTERPRISES
R S CONSTRUCTION CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .