Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.7 LAccepted-AOC | L1 | Accepted-AOC lowest | |
| 2 | L2₹41.0 L+₹2.2 L (5.75%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹45.8 L+₹7.0 L (18.2%)Rejected-Finance 17 A KRISHNA SQUARE II NEAR GURUDWARA AMRITSAR | AMRITSAR | AMRITSAR | PUNJAB | L3 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹36.6 L
EMD Value
₹73,160
Closing Date
3 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) AIR FORCE STATION AMRITSAR
ASST. GARRISON ENGINEER (I) AIR FORCE STATION AMRITSAR -143001
PROVN OF SECURITY RELATED WORKS AT AIR FORCE STATION AMRITSAR
2022_MES_526959_2
AGE (I) AF/ASR/T-15/2022-2023
Open Tender
Civil Works
Item Rate
270 days
AGE (I) AIR FORCE STATION AMRITSAR
Class D and category a(i) and b(i)
8 documents required · 8 mandatory
₹500
Yes
AGE (I) AIR FORCE STATION AMRITSAR
₹73,160
Yes
15 Sept 2022
18 Aug 2022
5 Sept 2022
18 Aug 2022
3 Sept 2022
20 Aug 2022
Amount
Excavating in trenchs, (Soft/Loose soil) n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out complete all as specified and directed.
Excavating in post holes( or similar holes) each n exc 0.5 cu.m. getting out, returning,filling in and ramming earth of broken rubble mixed with earth around , in layers not exceeding 25 cm, watring, and removing surplus soil to a distance n.exc 50 m and making good surface
Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point and disposal complete all as specified and directed.
M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm hard dense soil complete all as specified and directed.
M & L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete etc complete all as specified and directed.
M&L RCC M-25 (Design Mix) using 20 mm graded stone aggregates as in column footings, plinth beams etc complete all as specified and directed by Engr-in-Charge.
M&L RCC M-25 (Design Mix) using 20 mm graded stone aggregates as in columns etc complete all as specified and directed by Engr-in-Charge.
M&L RCC M-25 (Design Mix) using 20 mm graded stone aggregates as in beams etc complete all as specified and directed by Engr-in-Charge.
M&L RCC M-25 (Design Mix) using 20 mm graded stone aggregates as in chajja and fascia etc complete all as specified and directed by Engr-in-Charge.
M&L RCC M-25 (Design Mix) using 20 mm graded stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed.
Demolition of RCC Concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.
Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.
Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Formwork to sides of fair finished flat surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.
Fair finished Square, rectangular or polygonal Form work to sides of pillars, posts, struts, columns and stanchions complete all as specified and directed.
Fair finished flat Form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc complete all as specified and directed.
Fair finished flat Form work to chajjas and similar items including edges etc complete all as specified and directed.
Fair finished flat form works to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc complete all as specified and directed.
S & F in repair for Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed. (each line wire to be measured)
S & F for Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed. (each line wire to be measured)
Supply and fixing in repair punched tape concertina coil 610mm dia made with high tensile strength galvanized mild steel wire 2.60 mm dia as per IS 4454 strip material (galvanized MS strip as per IS-1730) upto 3 metre height of wall with angle iron 'Y' shaped placed 2.5metre to 3 metre apart and with 9 horizontal R.B.T stud tied with G.I staples and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron with reinforced barbed tape (RBT)/ spring core (2.6mm dia) wire minimum barb 9mm width, loop spacing 250± 20mm, coil length 9mm and fixed in position , complete all as specified and directed. . Note :-(i) The make shall be got approved by Engr-in-charge confirming to the specification before procurement. (ii) Mild steel angle (Y-Shape) shall be measured and paid for separately.
Providing and fixing flattened concertina coil 1050mm dia made with high tensile strength galvanized mild steel wire 2.60mm dia as per IS 4454 strip material ( galvanized MS strip as per IS-1730) upto 3 metre height of wall fixed with chainlink fencing in vertical surfaces placed 3.00 apart and with 9 horizontal R.B.T stud tied with G.I staples and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron with reinforced barbed tape (RBT)/ spring core (2.6mm dia) wire minimum barb 9mm width,loop sacing 250 ± 20mm,coil length 9m and fixing and laid in position etc of make as approved by Engr-in-charge confirming to the specification complete all as specified and directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil.complete all as specified and directed.
Demolition of brick work built in cement mortar complete all as specified and directed.
M & L Brick work built CM 1:6 subclass B brick strength curved or plan exc 6m mean radius complete all as specified and directed.
All as above Item NO.25.00 but except brick
M&L for 15mm rendering in cement mortar (1:4) on brick/concrete surfaces finished the surface even and smooth without using extra cement complete all as specified and directed.
M & L for 15mm rendering in cement mortar (1:6) on brick/concrete surfaces finished the surface even and smooth without using extra cement complete all as specified and directed.
Preparation of Newly Plastered surfaces of Wall and applying Two coats of Oil Bound Distemper over a coat of chalk whitening all as specified and directed.
M&L for preparation of newly plstered wall surface and applying two coats of cement Base paint over a coat of primer all as specified as directed by Engr-in-Charge.
M&L for prepration of surface applying two coats of Acrylic weather coat emulsion paint on plastered/concrete/flush pointed brick surface etc. on walls/ceiling/facias /Ramp/Bldg top surface etc in disruptive pattern having percentage of Six- colour as 29.04% of RGB Value (145,152,113) , 22.48% of RGB Value (112,139,86), 14.98% of RGB Value (123,137,126) , 13.80% of RGB Value (84,97,75) , 14.15% of RGB Value (123,137,94) and 5.55% of RGB Value (206,193,141) ) as per sample approved by AGE(I) for building of height upto 7.5 meter, over and including a coat of alkali resistance primer complete all as specified and directed. Note:- The rate quoted by contractor is demmed to include preparation of surfaces and necessary scaffolding for painting upto required height complete all as specified and directed.
S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mmX25mm double rebated comprises of glazed & gauged skelton shutter (required no of gauged shutter and glazed shutters) including guard bar ERW sec 50mmX20mm and 1mm thick with two openable leaf consisting two nos sash bar of T-section 20mmX3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 (Four Nos of each window) including following fitting welded to frame shutter:- Ref Drg No CEAF/STD-184-2012 Sheets 1/3, 2/3 & 3/3 (i) Hold fast,150mm long of MS flat iron 12mmX3mm made to shape-04 Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per window (iii) MS Tower bolt 150mm long-02 Nos per window (iv) Z sec 20mmX25mm,100mm long stopper -01 Nos per window (v) Cleat 55mm long of hollow square 15mmX12mm-02Nos per leaf (vi) Fabrication & fixing arrangements as Drg No CEAF/STD-184-2012 Sheets 1/3, 2/3 & 3/3 (vii) M S guard bar 08mm square bars @75mm C/C fixed horizontlly. Note : Glass,wiremess and painting shall be measured and paid separately.
S/F framed work as door, chowkhats, and Grill gates of angle frame work fixed with Nut & bolt to wall or other section complete drilling or fixing welding be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also festering and fixing complete complete all as specified and directed.
S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exc 0.5 sqm in each pane complete all as specified and directed.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
S&F Carbon steel (Finishd with blackodised/Hot dip galvanized) L shaped anchor bolt/foundation bolts ASTM F1554 Gd 55 screwed one end, with 2 hexagonal or square nuts and 2 washers,the other end enlarged, and jagged or lewised, but Diameter of bolt 25mm and length of bolt 1050 cm long or as required at site complete all as specified and directed by Enge in charge.
S&F Anodised aluminium frames for ceiling, windows,ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified.
S&F joist, channel, steel tube of any size as per requirement (IS Ref 1161:1998) sections fixed independently, with or without connecting plates etc. for compression members of shed with riveted, bolted or welded attachment complete all as specified and directed by Enge in charge.
S&F Rolled MS Gde Fe-410-S in Plates (plain or chequered) channels, square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and directed.
S&F Fe 410 Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. in cluding cleats, brackets, etc.complete all as specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for
S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; including all necessary drilling, bolting or riveting, etc., conforming to Fe-290 Gde E-165 complete all as specified and directed by Enge in charge.
Supply only Mild steel flat iron conforming to Fe 410-0 as in rail/fillets for securing chain link fencing including drilling holes etc complete all as specified and directed by Enge in charge.
M&L preparation of new untreated steel surfaces of any description, over 10 cm in girth, not otherwise described and painting two coats of synthetic enamel paint over a coat of red oxide all as per directed by Engr-in-charge.
S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength 550 MPA as in roof covering/cladding to wall or roof covering incudingl ridge fixed with self tapping screws / L type or J type hook as specified
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Demoliton of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and as directed by Engineer-in-Charge
Factory Made machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 gradecomplete all as specified and directed
M&L 25mm sand filling under floor incl watering and consolidation complete all as specified.
M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggr as in sub base all as specified and directed
M&L for Machine cut Kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms and bulit in cement mortar (1:4) 20 mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.
S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.
INTERNAL ELECTRIFICATION
Material and labour for Point wiring for One light / Celing fan/ Exhaust fan point/Bell point, controlled by one switch 5 Amp SP one-way complete with 1.5 Sq mm (nominal area) PVC insulated, unsheathed and multi strand copper conductor FRLS cable (ISI marked) drawn into and including PVC concealed conduit (medium quality) and conduit fittings including 1.5 Sq mm PVC insulated unsheathed and multi stranded copper conductor FRLS cable as earth wire to common earth and connecting to earth dolly including MS sunken box covered with 3mm thick bakelite laminated “hylem or Philips“ sheet top cover and machine made brass screw and washers etc complete all as specified and directed Notes:- (i) For Internal wiring colour to be used as per IE rule for Phase - Red/Yellow/Blue, Neutral - Black and Earth – Green (ii) Making good on disturbed surfaces and quoted rate including M&L for white/colour wash (existing colour) to macth with existing surfaces, complete as directed by Engineer-in-Charge (iii) Switch/socket to be measured and paid separately.
For one light/fan/bell point controlled by one 6 Amp one way switch
All as per item No. 58.00 hereinbefore but wiring for one 3 pin 6 Ampere socket outlet point on the same board, controlled by other switch complete all as specified and directed.
All as per item No. 58.00 hereinbefore but wiring for one 3 pin socket outlet 6 amps independent board.
S & F of switch piano flush type single pole one-way 6 Ampere complete all as specified and directed.
S & F socket 6 Amp 2/3 pin combined complete all as specified and directed by Engr-in-Charge. ,
S & F of ceiling rose, surface bakelite, 65 X 50 mm, 3 terminals complete all as specified and directed.
Supply and fixing LED tube light fitting 1x20 watts with PVC insulated flexible copper cable from ceiling rose to tube light fitting complete all as per specified and directed.
Supply and fixing SMD LED panel recess/surface suspended mounting 35/36 watt 2' x 2' LED ceiling light with extruded aluminium housing and milky diffuser including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 Volts, 50HZ complete all as specified and directed.
Supply and fixing SMD LED panel recess/surface suspended mounting 12 watt round shape LED ceiling light with extruded aluminium housing and milky diffuser including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 Volts, 50HZ complete all as specified and directed.
S & F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 8 ways including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed sunk/flush to the wall or niche complete all as specified and as directed including necessary brick work and plaster to match with the existing surface complete all as specified.
S & F MCB DP, 240 Volts, AC, B curve, 10 KA, 40 Amps (10 KA 'B' rupturing capacity) complete all as specified and as directed
S & F MCB single pole, 240 Volts, AC, B curve, 10 KA, 6 to 32 Amps (10 KA 'B' rupturing capacity) complete all as specified and as directed
EXTERNAL ELECTRIFICATION
Supply , laying jointing and commissioning, LT under gound cables (Departmental supply) XLPE insulated screened PVC bedded galvanized steel strip armoured electric powder cable (heavy duty) with alumininum conductor cross sectional are 35 Sqmm 3 core LT, 1100 volts grade , laid in trenches , along poles or passing with through pipe or laid under floor or through/ on walls etc, including taking out old cable with protection bricks and removal, complete all as specified and directed Note:- Excavation and earth work , sand cushioning, brick protection and GI pipes for protection shall be measured and paid for separtely.
Excavation in trenches in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5 meter deep for laying of cables and foundation of poles etc. and getting out complete all as spceified and directed.
Returning, filling in trenches (soil) including spreading leveling and well ramming in layers not exc 25 cm thick complete all as specified and directed.
Removal of surplus excavation soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.
M&L sand cushioning with a layer of dry river sand 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts. Complete all as specified and directed Note: Punned down thickness (overall 18cm), shall be considered for measurement and payment.
M&L, locally available , sub class 'B' bricks (old size) laid flat and dry in trenches over the cable for protectionprependicular to the direction of cable adjacent to each other complete all as specified and directed.
M&L, GI pipe light grade 50mm dia bore for cable protection fixed to pole or under road/ pavement, complete including MS clamps, nuts, bolts etc all as specified and directed.
Supply and fix steel tubular swaged poles type 410 SP-31 (9.0 meter long) complete with CI base plate finial including excavation and PCC foundation and coping etc complete all as specified and directed.
Note: The Total amount shall subject to adjustment of credit for old Materials as per Schedule of Credit.
M/s AKG Engineers & Contractors
MAAN ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .