PROVN OF CHAIN LINK FENCING, TOILET BLOCK, PARKING SHED, CANDIDATE WAITING SHED AND SPECIAL REPAIR TO CERTAIN BUILDINGS, CANDIDATE WAITING SHED AT SCE, HQ SUB AREA NEAR COMPLAINT CELL UNDER GE WEST PRAYAGRAJ.

Amount

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and as directed.

Excavation in trenches n.exceeding 1.50m wide and n.exc 1.50m depth for foundation etc or for shafts, walls, cess-pits, manholes, pier holes, cable etc n.exc. 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified & directed.

Removing excavated materials exceeding 250 mtr but not exceeding 500 m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified & directed.

Returning, filling in including spreading, levelling watering and well ramming in layers not exc. 25cm thick complete all as specified and directed.

Excavating in post holes (or similar holes) in soft / loose soil each not exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm ,watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed.

M & L for cement concrete 1:3:6 type C2 using 40 mm graded aggregate in foundations, sub base filling and mass concrete complete all as specified and directed

M&L for MS screw bolts 5 to 10 mm dia (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut exceeding 5 cm and not exceeding 10 cm long complete all as specified and directed.

M&L for MS screw bolts 5 to 10 mm dia (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut exceeding 15 cm and not exceeding 22 cm long complete all as specified and directed.

S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire

Supply only chain link fencing of size 100mmx100mm, 4mm dia complete all as specified and directed

M & L for 10 mm dia mild steel round bar provided for tightening of chain link fencing complete all as specified and directed.

M & L preparing new steel and iron surfaces of any description ,not exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for galvanized 2 strand 2.24 mm dia steel barbed wire, barbed with 2mm dia barbs at 75mm (approx) spacing and straining and fixing to any type of post, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified and as shown on the drawing including straining bolts complete all as specified, directed and shown on drawings. Note:-Each line of wire to be measured separately

S&F rolled mild steel conforming to Gde Fe 290 (Gde E-165) (Plain or chequred) , joist, channel, angle or tee sections, fixed independently, without connecting plates, etc complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed

M & L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed

M & L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed

M & L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical complete all as specified and directed. Note:- Surface area of the sub structure in contact with backfill to be measured.

M & L for 40 mm thick plain cement concrete 1:2:4, type B-0 using 12.5 mm stone aggregate as in damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed

M & L for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cum per Sqm complete all as specified and directed

M & L for polythene film 150 micron thick, laid over & including a coat of bitumen primer @ 0.30 to 0.50 kg per sqm complete all as specified and directed

M & L for cement concrete 1:4:8 type D2 using 40 mm graded aggregate in foundations, sub base filling and mass concrete complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete with necessary form work complete all as specified and directed. Note:- Reinforcement & formwork to be measured & paid separately under respective item.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts with necessary form work complete all as specified and directed. Note:- Reinforcement & formwork to be measured & paid separately under respective item.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in lintel band at any height with necessary form work complete all as specified and directed. Note:- Reinforcement & formwork to be measured & paid separately under respective item.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in slabs supported on walls, roof beams etc and the like with necessary form work complete all as specified and directed. Note:- Reinforcement & formwork to be measured & paid separately under respective item.

Use & waste of formwork to soffits of suspended slabs supported on wall and similar work not exceeding 200mm thick or lintel / beam (Horizontal or sloping) complete all as specified and directed

Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed

Use & waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions with rough finished surface complete all as specified and as directed

Use & waste of form work to sides and soffit of floor or roof beams, beam haunching, girders, bressumers, lintels, cantilevers, shelves including supports, overhangs, etc rough finished complete all as specified and as directed

Use & waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed

M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per srl item No. 35 above but for 5 mm dia & over upto & including 10 mm dia in stirrups, spaces and binders complete all as specified and directed.

Demolition of brickwork masonry built in lime or cement mortar including all quiens arches , pillars etc. but including concrete articles complete all as specified and directed.

M & L Brick work with fly ash bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

M & L Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

M & L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in 1:4 CM complete all as specified and directed

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on ceiling of RCC or brick finished fair and even without using extra cement. complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for hardcore of gauge n exc. 63 mm, of broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C1 using 20 mm graded stone aggregate in plinth protection finished even and fair including necessary form work and cutting of joints using extra cement etc complete all as specified.

M&L for preparation of new plastered surface of wall and applying 1-2 mm thick wall care putty to achieve a smooth finish surface and apply two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered surface of wall by scrapping machine tool / electric hand grinder with wire brush and apply two coats of oil emulsion distemper from paint sprayer complete all as specified and directed.

M&L for preparation of old plastered surface of wall by scrapping machine tool / electric hand grinder with wire brush and apply two coats of apex weather proof external paint from paint sprayer over a coat of 1 mm thick cement putty complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over & including one coat of primer complete all as specified and directed.

M&L for preparation of newly plaster surface of ceiling and applying two coats of white wash complete all as specified and directed.

S&F factory made solid PVC door frame of size 50 mm x 95 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.

S&F factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick with partical board core (stile:) with 2,4 or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front Face & 2 mm Plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

M & L for cement concrete 1:5:10 type E2 using 40 mm graded aggregate in sunken filling and mass concrete complete all as specified and directed.

Taking down cement plaster on brick wall or stone wall etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed

M&L for rubbing & polishing of existing kota stone flooring complete all as specified and directed.

S&F 150mm long anodised aluminium handles, fabricated type complete all as specified and directed.

S&F 200mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm long aluminium alloy floor door stopper ,fabricated type complete all as specified and directed.

S&F 300mm long, aluminium alloy, anodised aldrop door bolt including fixing clips of sheet, cast or extruded section and fixing bolts and 16mm dia bolt of sliding bolts of extruded sections complete all as specified and directed.

M&L for factory made uPVC white colour sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+/ - 0.2mm), window profile with hollow section with multi chamber. Frame of size 88mm x 52mm, sliding sash of size 42mm x 67mm, sliding mesh Sash of size 42mm x 57mm, sliding interlock (One vertical length in each shutters) of size 45.5mm x 28mm, Glazing bead 24.5mm x 16mm will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 +/ - 0.2mm thick galvanised steel Frame of size 30mm x 18mm, 2 nos, sliding sash 30mm x 18mm, sliding mesh sash 26 mm x 10mm profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. Note: (i) The unit rate quoted by contractor shall be deemed to include all other connected accessories. (ii) Area of glass shall be measured & paid separately under relevant item. (iii) Net Opening will be measured lor payment purpose.

S&F 4.8 mm thick sheet glass ordinary quality in square n.exc 0.5 Sqm in each pane new door / window shutter complete all as specified and directed.

S&F 3mm thick figured glass pin head type in square n.exc 0.5 Sqm in each pane for new ventilator / window shutter complete all as specified and directed.

S & F steel work in tubular trusses, purlins, rafter, column where connected common rafter and running rails fixed with angle cleat or other common plates including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for dark shade double charged / wooden texture vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M & L for non skid coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but n exc 0.18 Sqm, in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for glazed ceramic coloured wall tiles in vertical surface 450 X 300 X 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified.

M & L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) including the screed bed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations compete all as specified and as directed.

M&L for 60 mm thick M-35 grade factory made vibratory compacted cement concrete rubber moulded interlocking paver block/tiles Coloured any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 30 mm thick sand cushion and joints filled with sand complete all as specified and directed.

M & L for 25 mm thick plain cement concrete 1:2:4, type B0 using 12.5 mm graded stone aggregate as in levelling course of floor and other similar works complete all as specified and directed

Cutting holes in full brick walls, built in cement mortar for inserting of sunken pipe , holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

S&F rotational moulded, multilayer three layer white colour HDPE water storage tank of 500 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

S & F in repairs vitreous China white wash down water closet pan (pedestal pattern) including fixing bolts, plastic water closet white. seat cover closed pattern with flat bottom (white colour) and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S & F in repairs flushing jet for pedestal pattern WC including flexible pipe and brass CP nuts, complete all as specified and directed.

S & F in repairs suitable for 15 mm dia health faucet abs body with 8 mm dia 01 mtr long flexible tube & wall hook complete all as specified and directed.

S&F PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set all as specified and directed.

S & F in repairs PVC connection 450 mm long, 15 mm size with brass chromium plated nuts complete all as specified.

S & F in PVC connection 600 mm long, 15 mm size with brass chromium plated nuts complete all as specified.

S&F bib taps fancy type with crutch or butter fly handle, chromium plated with screwed down, screwed for iron pipe or for brass ferrule ,15mm bore complete all as specified and directed.

S&F in repair bib taps fancy type with crutch or butter fly handle, chromium plated with screwed down, screwed for iron pipe or for brass ferrule ,15mm bore complete all as specified and directed.

S&F CP angle stop valve or cock fancy type of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed.

S&F in repair CP angle stop valve or cock fancy type of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed.

S&F in repair vitreous china wash basin oval type under over counter shape of size 550x460 mm laid over stone slab including brackets of approved size including necessary cutting for and pinning in ends of brackets in cm 1:3 including 32 mm dia Chroumim plated waste coupling complete all as specified and directed

S&F fancy type Pillar tap 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure with long shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair fancy type Pillar tap 15mm bore swan neck, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure with long shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repairs 600 mm long tubular towel rail , brass chromium plated of 20 mm dia complete all as specified and directed.

S & F in repairs ornamental looking mirror of fancy type 5mm thick glass , with chromium plated beading incl polishing complete all as specified and directed.

S&F in repair 15mm bore Chromium plated two way angle cock / two way bib tap with flange Chromium plated half turn cast copper alloy with long shank and cup screwed down complete all as specified & directed.

S&F in repair 32 mm bore low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm white in colour fixed in repairs to walls or laid in floors including all fittings such as bend, elbow, tee etc complete all as specified & directed.

S&F vitreous china wash and basin, white, flat back, size 550 mm x 400 mm fixed on MS bracket including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, waste fitting, pipe and union complete all as specified and directed.

S&F WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including 'P' or 'S' trap complete all as specified and directed.

S&F vitreous china Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including 32mm dia CP coupling, CP urinal spreader with CP pipe up to angle cock, waste pipe etc with all fixing arrangement and pointing around urinal back complete all as specified and directed.

Cutting holes in brick walls in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for purpose made cutting and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required in full brick wall complete all as specified and directed.

Taking up or down 15 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed

Refixing old 15 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed

S&F 15 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.

Taking up or down 20 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed

Refixing old 20 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed

S&F 20 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.

S & F for 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S & F in repairs 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to wall or laid in trench or in floor complete all as specified and directed.

S & F in repairs 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to wall or laid in trench or in floor complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S & F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75 mm bore complete all as specified and directed.

S & F 110 mm bore PVC (SWR) vent cowl complete all as specified.

S & F in repairs PVC (SWR) floor trap plain with grating incl joining with solvent cement, dia of outlet 110 mm bore complete all as specified and directed.

S & F Salt glazed stoneware drain pipe grade 'A' 150 mm bore laid in tranches and jointed complete all specified and as directed.

M&L for preparation of old decorated surface of ceiling and applying one coat of white wash on ceiling complete all specified and as directed.

M&L for preparation of old decorated surface of wall and applying one coat of white wash on complete all specified and as directed.

M&L for preparation of old plastered surface of wall and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 5489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M&L preparation of old wooden surface exc over 10cm width or girth and applying one coat of synthetic enamel paint by paint sprayer complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4.0 Sqm each and removing from site complete all as specified and directed.

S&F 12 mm thick tuffened glass door with suitable locking arrangement with lock 6 lever and self closing devices with rebates including jointing cleats of suitable section for fixing builders hard ware fittings door spring with two Nos decorative type aluminium handle of 200 mm dia complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay etc complete all as specified and directed.

S&F in repair stainless steel butt hinge of size 100 mm long for fixing of PVC door shutter etc complete all as specified and directed

S&F 100 mm long stainless steel butt hinges with steel pin complete all as specified and directed.

S&F 300mm long, aluminium alloy, anodised aldrop door bolt including fixing clips of sheet, cast or extruded section and fixing bolts and 16mm dia bolt of sliding bolts of extruded sections complete all as specified and directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed.

S&F 4mm thick E-boards tiles false ceiling with powder coated GI snap grid frame work including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0/Cement mortar 1:3 complete all as specified and directed including all necessary drilling and necessary arrangement to fix electrical items as under:- (a) 25x25x1.6 mm thick GI angle powder coated duly plugged @ 600mm centre to centre along perimeter of wall. (b) 25x25x1.5 mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders with adjustable clamps and dash free fasteners plugging in RCC slab placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4 mm thick E-boards tiles of size 595 mm x 595 mm of approved texture and finished complete with two coats of oil emulsion distemper on ceiling. NOTE: The complete ceiling work shall be done as per manufactures instruction and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of TATA blue scope 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet of TATA blue scope 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

M & L for PCC 1:3:6 type C2 using 40 mm graded aggregate as in bed drain pipes of 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete.

M & L for PCC 1:2:4 type B1 using 20 mm graded aggregate as in roof, lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Taking down carefully point wiring of any type complete for light, fan socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets, regulators, wooden batten, surface conduit/casing capping/conceal etc. removing materials including accessories for taking credit and making good disturbed surface to match the existing complete all as specified & directed.

M&L for point wiring with FRLS PVC insulated unsheathed stranded copper conductor cable 1.5 Sqmm (nominal area) 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly drawn in and including non metallic PVC rigid, medium grade concealed conduit with all fixing accessories of 20mm dia, using new MS sunk terminal boxes of thickness not less 1.2mm, new 3mm thick laminated sheet cover with brass screw and cup washers with all accessories and making good to disturbed conceal surfaces complete all as specified and directed. Note:(a) Colour code of wire shall be strictly followed , Red for Phase , Black for neutral and green for earth wire (b) The unit rate quoted is deemed to be inclusive of cost of cutting chases in wall for providing concealed conduit and making good to match with existing finish/surface. (c) Foe modular point wiring, cost of modular sunken box & cover plate are included in the quoted rate.

One light/fan/bell point controlled by one switch

One point for socket outlet 5 amps on independent board but not below the switch board in same vertical plane.

One point for socket outlet 5 amps on independent below board in same vertical plane.

One point for socket outlet 5 amp same board.

All as per srl item No. 131 above but for one 3 pin socket outlet 15 amps, independent, with cables 2.5 sqmm size on independent board 2.5 Sqmm earth wire complete all as specified and directed.

S&F ceiling rose surface type bakelite 65 X 50 mm two / three terminal complete all as specified and directed.

S&F switch piano, flush type 5 amps, single pole, one way 230 volt complete all as specified & directed.

S&F switch modular type 5 amps, single pole, one way 230 volt complete all as specified & directed.

S&F Lamp holder, PVC/ polycarbonate type with back plate suitable for batten fitting complete all as specified & directed.

S&F switch socket combination modular type suitable for 3/ 5 pin , 6 Amp, 230 volt complete all as specified & directed.

S&F switch modular type 16 amps, single pole, one way 230 volt complete all as specified & directed.

S&F switch piano, flush type 16 amps, single pole, one way 230 volt complete all as specified & directed.

S&F socket outlet suitable for 3/ 5 pin , 5 Amp, 230 volt complete all as specified & directed.

S&F socket out let 2-in-1, 3 pin, 5/6 & 15/16 amp modular type complete all as specified & directed.

S&F sheet metal enclosure for MCB's 240 volt 8 way single pole and neutral with 200 amps rated busbar, double door on wall with and including suitable flat iron clamps duly grouted/ fixed flush in the wall complete all as specified and directed.

Taking down existing unserviceable MCB any capacity complete all as specified and directed.

S&F MCB SPN 40/63 Amps 'B' series, breaking capacity 10 KA of rating & making connection complete all as specified and directed.

S&F MCB single pole, 6 to 32 amps rating, 240 volts, 'B' series, 10 KA breaking capacity & making connection complete all as specified and directed.

S&F for 415 Volts breaking capacity 10 KA 'C' Curve MCB Triple pole and Neutral of current carrying capacity 40 to 100 Amp and connection in DB complete all as specified and directed.

S&F in replacement of sheet metal enclosure single pole and neutral enclosure with a two pin and earth plug and socket along with one MCB, double pole of current rating 20 amps, C series 240 volts AC including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as specified & directed. Note: (I) The cost for cutting, chases required shall be deemed to include in the quoted unit rate.

Taking down carefully sub main of any type complete with MCB DBs MCB, isolators wooden batten, surface conduit/casing conceal etc. removing materials including accessories for taking credit and making good disturbed surface to match the existing complete all as specified & directed.

M&L for concealed sub main wiring using FRLSH PVC insulated, unsheathed stranded copper conductor cable two single core of size 10.0 Sqmm of voltage rating upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 20 mm dia with all fittings and accessories along with one run of PVC insulated unsheathed stranded copper conductor of size 10.0 Sqmm as earth continuity conductor for 8 way DB complete all as specified & directed. Note:- (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one length. (ii) The cost for cutting, chases required shall deemed to be included in the quoted unit rate.

M&L for concealed sub main wiring using FRLSH PVC insulated, unsheathed stranded copper conductor cable two single core of size 4.0 Sqmm of voltage rating upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 20 mm dia with all fittings and accessories along with one run of PVC insulated unsheathed stranded copper conductor of size 4.0 Sqmm as earth continuity conductor complete all as specified & directed. Note:- (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one length. (ii) The cost for cutting, chases required shall deemed to be included in the quoted unit rate.

S & F in replacement of existing worn out LED with LED lighting fixture with co extruded polycarbonate body environmental friendly, energy efficient tube light complete with all accessories internally pre-wired and including LED lamp 20 watt 01 No and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified.

S&F in replacement of existing worn out LED with 10 W mirror light fitting with high output with opal diffuser 230 V AC decorative type with driver holder and LED lamp including connecting with three core flexible copper conductor cable of suitable size complete all as specified.

S&F in replacement of existing worn out LED with 05 W mirror light fitting with high output with opal diffuser 230 V AC decorative type with driver holder and LED lamp including connecting with three core flexible copper conductor cable of suitable size complete all as specified.

S&F in replacement of existing worn out LED with 10 W bulk head fitting with high output with opal diffuser 230 V AC decorative type with driver holder and LED lamp including connecting with three core flexible copper conductor cable of suitable size complete all as specified.

S&F in replacement of LED luminaire 600 mm x 600 mm, 36/40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver with suitable size of wire complete including connecting with three core flexible copper conductor cable of suitable size complete all as specified & directed.

S&F Exhaust fan 300 mm sweep Metallic body Range complete and shutters including required length and size of copper stranded conductor for connection from ceiling rose to connector of fan with provn of making hole in wall complete with grouting of nuts, bolts and washers and all other accessories required for fixing of fan including testing complete all as specified and directed.

S&F ceiling fan with down rod, fan connector/ fan hook, 1200mm sweep, 240 V AC, Energy efficient, 5 star rating with 3 Blade and connecting up including provn of three core PVC insulated multi stranded flexible copper conductor cable of size 1.5 sqmm copper wire from ceiling rose to fan of length not less than 0.5 mtr. all as specified & directed.

S&F sheet metal enclosure for MCB's 240 volt 4 way single pole and neutral with 200 amps rated busbar, double door on wall with and including suitable flat iron clamps duly grouted/ fixed flush in the wall complete all as specified and directed.

S&F sheet metal enclosure for MCB's 240 volt 12 way single pole and neutral with 200 amps rated busbar, double door on wall with and including suitable flat iron clamps duly grouted/ fixed flush in the wall complete all as specified and directed.

S&F sheet metal enclosure for MCB's 415 volt 12 way single pole and neutral with 200 amps rated busbar, double door on wall with and including suitable flat iron clamps duly grouted/ fixed flush in the wall complete all as specified and directed.

S & F Ekinox³ TPN DB-VTPN DB 6 way DPX³ 160A MCCB Double door DB's as per IEC 61439-3, suitable for flush mounting and surface mounting with 250 Amp copper busbar for each phase with 2 Neutral bar, 2 earth bar and cable ties for cable management, fully insulated busbar & shrouded neutral bars, improved pan assembly for ease of installation, prefitted masking sheet, reversible door for IP 43 & IP 54 DB's with provision for DPX³ 160 MCCB as incomer and SP/TP MCB's as outgoing with metal door complete all as specified and directed. Make :- Indo asian ( HNS Code 8537) cat Pt No. 811871 or equivalent as specified in P.S.

S&F MCCB 4 Pole, 415V, adjustable thermal setting type of capacity 160 amps, 25KA complete all as specified and directed. Make :- Indo asian ( HNS Code 8536) cat Pt No. 830295 or equivalent make as specified in P.S.

MCCB 3 Pole, 415V, adjustable thermal setting type of capacity 63 amps, 16 KA complete all as specified and directed. Make :- Indo asian ( HNS Code 8536) cat Pt No. 830240 or equivalent make as specified in P.S.

M&L in replacement for 80 mm bore GI tubing 'light grade' with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete all as specified & directed.

S&F electronic meter temper proof LCD display with polycarbonate cover 230 V 10 - 60 Amp , accuracy Class I, 50 Hz, conforming to IS 133779, IP -54 , with parameters to show data time, current reading, load, PF, voltage, KWH complete all as specified & directed.

M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover reinforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode of 60 cm X 60 cm X 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized strip of size 32 mm X 6 mm as earth lead by means of bolts, nuts, checknuts and washers of galvanized iron or steel, galvanized iron pipe of 40 mm diameter connected to earthing test point, all as shown in electrical plate No. 5, connected to earthing test point including testing on completion, excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep with a 10 mm deep CI cover hinged to CI frame on ground level, GI watering pipe, funnel, etc. and connected to the earth point and testing complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sq mm 2.0 core complete all as specified & directed. Note:- Earth work, Sand & Bricks shall be paid separately under respective items

S & F 1100 volts grade heavy duty cable PVC insulated aluminium solid conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular 10 Sqmm of aluminium conductor complete all as specified & directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 Sq mm 3.5 core complete all as specified & directed. Note:- Earth work, Sand & Bricks shall be paid separately under respective items

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sq mm 4.0 core including taking down complete all as specified & directed. Note:- Earth work, Sand & Bricks shall be paid separately under respective items

Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed.

M & L for sand cushioning with Ganga Sand to underground cable (8 cm thick before laying and 15 cm thick after laying the cable complete all as specified & directed. Note:- Punned thickness shall be measured for payment.

M/S Garg Sons

M/S CHANDRIKA PRASAD AND SONS

M/S JAI DURGA CONSTRUCTION

Minakshi Construction

M/S A P CONSTRUCTION

Siddhi Constructionn