Shifting of transformer at WTP in Tiptur CMC limits

Shifting of transformer at WTP in Tiptur CMC limits (For cat-1)

RCC Pole - 9 Mtr Long, 145 Kg WL(Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785

RCC Pole - 9 Mtr Long, 145 Kg WL(Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785 (Labour)

Pre-Stressed Tubular Spun Pole - 11 Mtr Long, 500 Kg WL(Dwg No. BESCOM/GM/QS&S/45 Dtd 24.11.2018) as per IS-13158: 1991

Pre-Stressed Tubular Spun Pole - 11 Mtr Long, 500 Kg WL(Dwg No. BESCOM/GM/QS&S/45 Dtd 24.11.2018) as per IS-13158: 1991 (Labour)

DP Structure using PSCC Pole-9mtr Long, 300Kg WL(Including cost of poles)

DP Structure using PSCC Pole-9mtr Long, 300Kg WL(Including cost of poles)(Labour)

11 kV, 200 Amps Single Break GOS (Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018)

11 kV, 200 Amps Single Break GOS (Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018) (Labour)

Concreting materials for 11 Mtrs Spun pole (Base concreting 1:2:4, 1000*1000*150mm)(Labour)

Concreting materials for 11 Mtrs Spun pole (Pole concreting 1:2:4, 1000*1000*2500mm)(Labour)

Concreting materials for 11 Mtrs Spun pole (Coping 1:2:4, as per actuals)(Labour)

Horizontal cross arm with clamps, HTST Supports, bolts, nuts

Horizontal cross arm with clamps, HTST Supports, bolts, nuts (Labour)

11 kV, Special 3 Pin Cross Arm - MS(Dwg No. BESCOM/GM/QS&S/03 Dtd 24.11.2018)

11 kV, Special 3 Pin Cross Arm - MS(Dwg No. BESCOM/GM/QS&S/03 Dtd 24.11.2018) (Labour)

11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod)

11 kV, 45 kN Polymeric Insulator

LT 4/2 pin cross arm with clamp, bolts, nuts

LT 4/2 pin cross arm with clamp, bolts, nuts (labour)

Guy set complete with no 15 strain insulator

Guy set complete with no 15 strain insulator (Labour)

Spiral earth electrode

Spiral earth electrode (Labour)

Rabbit ACSR Conductor 1.5% sag

Rabbit ACSR Conductor 1.5% sag (Labour)

Releasing & Refixing of Rabbites Conductor (0.180*4361*1.9%)

Releasing & Refixing of 11KV AB Cable(0.120*34768*1.9%)

Releasing & Refixing of 11KV AB Cable(6*160*1.9%)

Releasing & Refixing of Harizental Xarm(6*70*1.9%)

Releasing & Refixing of with pole dp set(1*5392*1.9)

Releasing & Refixing HT Metering cubical(1*1844*1.9)

Releasing IRONPOLE

Releasing Rabbites Conductor

Releasing IRONPOLE Dp set

Releasing POLE Dp set

Releasing of HT Metering cubical

Releasing of 25 kva transformer

Releasing of double pole tc set

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975, 240 Sqm...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff, 120 to 240 Sqmm

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable, 3.5 x 225/240/300 Sqmm

Cable Joint and wiring (for HT & LT UG Cable), LT UG Cable, Heat shrinkable Type Terminations, 120 to 240 Sqmm

Shifting of transformer at WTP in Tiptur CMC limits (For cat-1)

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate. For Drain works consider 35% of item concrete r...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying 100mm thick pre-cast cover slabs over drains & Rain pit of width not exceeding 800 mm using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired stee...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Flush / Ruled/ Struck or weathered pointing Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cos...

Granular Aggregates 40mm downsize