Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹23 L
EMD Value
₹23,000
Closing Date
23 Dec 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Officer
Near Block Office, Pacode Town Panchayat
Construction of 1.00 Lakh Litre capacity OHT at Arattukalal and Providing Pumping main supply line in Pacode Town Panchayat. 15th Finance 2024-2025 IInd Installment
2025_DTP_634666_1
99/2025/A1
Open Tender
Civil Works
Works
90 days
Pacode
-
3 documents required · 3 mandatory
₹0
₹23,000
20 Dec 2025
20 Dec 2025
23 Dec 2025
20 Dec 2025
23 Dec 2025
20 Dec 2025
20 Dec 2025 - 23 Dec 2025
Earthwork excavation in all soils and sub soils except hard rock requiring blasting with initial lead and lift including re-filling the sides of foundation in layer of 15 cm thick watering, ramming, depositing the surplus earth in the premises as directed by departmental officers etc., complete as per SS 20 B TNDSS NO: 23&24VI (S2), VII 9,10- 1m3 For Foundation 1 st depth of 2m
2 nd depth of 1m
Supply, collection and filling of River Sand from approved quarry including all cost and conveyance to site, stacking them on road side to departmental gauge for the take premeasurement. Each layer not more than 15cm thick and consolidation properly etc complete. TNDSS No : 301 & 305
Plain Cement concrete 1:2:4 (one cement, two sand and four aggregates) using 20mm ISS HBG metal including cost of all materials and labour charges for mixing, laying, compacting and curing etc, complete as per standard specifications. TNDSS NO: 30 V,VI (S3) VII-3
Reinforced cement concrete 1:11/2:3 (one cement one and half sand and three aggregate) using 20mm size I.S.S. metal including cost conveyance of materials to site and all labour charges etc., mixing laying consolidating curring etc., but excluding cost of steel etc., complete as per standard specification as per TNDSS NO: 30 V,VI (S3) VII-3 Below 1.50m to 4.50m depth from G.L
Below G.L upto 1.50m depth
Above G.L upto 4.50m depth
Above 4.50m to 7.32m ht., from GL
Above 7.32m to 10.98m hit., from GL
Supplying and erecting steel centering for sides and soffits including supports and strutting upto 3.29 m height for plain surface as RCC slabs, rectangular tee (or) elbeams, lintel, bed block stair case waist slab, landing slab, etc., complete as per standard specification - 10m2 as per TNDSS & Morth specification No:30 & 36PLAIN SURFACE Below G.L & Upto 3.30m height
From 3.30m to 4.30m height
From 6.30m to 7.30m height
CURVED SURFACE Below G.L & Upto 3.30m height
From 3.30m to 4.30m height
From 6.30m to 7.30m height
SQUARE COLUMN Below G.L & Upto 3.30m height
From 3.30mto 4.30 height
From 4.30 to 5.30m height
From 5.30 m to 6.30m height
From 6.30 m to 7.30m height
CIRCULAR COLUMN Below G.L and upto 3.30m height
From 3.30mto 4.30 height
Stage 4.30 to 5.30m height
Stage 5.30 m to 6.30m height
Stage 6.30 m to 7.30m height
Supplying, fabricating and placing in position of mild steel or TMT rods, including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete as per SS. TNDSS NO: 97 V,VI (S6) VII (S6) VII-3
Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers.
Supply and fixing of R.C.C (1:1.5:3) tank inside access ladder mado of 20mm size HBG metal including cost of all materials, centering, shutering. strutting, fabrication and placing in position of reinforcement,finishing and curing etc complete
Supplying and fixing in position of 0.60x0.60m water light CI Man hole frame and cove of approved pattern at the roof slab and as directed. The man hole frame and cover should be of light duty and confirming to IS 1726-1974
Writing of scheme details on the side wall of the OHT including cost of paint and all labour charges etc. complete
Supply, delivery and fixing of enameled water level indicator of approved design and pattern (graduation in metric system) with required all accessories as directed by TWAD Board Officers. (The rates including loading, unloading, transportation charges etc.,)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
Tendernotice_1.pdf
PDF • 3.34 MB
Tendernotice_2.pdf
PDF • 1.14 MB
BOQ_759448.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .