Provn of 02 x shed for washing and servicing point of 507 ASC Bn, Spl repair to bldg No T-149 (JCOs Mess) of 7 Inf Div Pro Unit and certain Rev and Minor Wks under GE (East) Fzr Cantt

Amount

Excavating in post holes (or similer holes) each n. exc. 0.5 Cum. Getting out returning, filling in and ramming earth or broken rubble mixed with earth around in layer not exc.25 cm.soft/loose soil complete all as specified and directed.

M & L for cement concrete in foundation filling and mass concrete type D2 1:4:8 (40mm graded aggregate) complete all as specified and directed.

S&F rolled section (MS Pipe) as in framming for cladding, slabing and the like fixed with angles cleats and connected plates etc complete all as specified and directed.

S&F Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel or flat sections), distance pieces, cleats etc of E-250(Fe 410-W) including fabrication, erraction and fixing complete all as specified and directed.

S&F Pre painted galvatume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F MS Plate (Plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes with riveted bolted or welded attachment Fe-410-W(Gde-E-250) complete all as specified and directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, n. exc. 5cm long 5 to 10mm dia complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed

M&L 50mm thick Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection complete all as specified and directed

M&L 50 mm thick Cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and directed

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed

S&F Anodised aluminium snap grid frame work size 605X605 mm for false ceiling complete all as specified and directed

Supply and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed

Demolition of brick work built in cement morter including all qurious arches pillers etc complete all as specified and directed

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius in CM 1:6.complete all as specified and directed

Taking down chowkhats or frame with shutter (without taking off shutters from the frame) exc 1.5 sqm n.exc 4 sqm each.complete all as specified and directed

Taking down wooden chowkshats of frames with shutters (without taking off shutters from the frames) of size not exceeding 1.5 square metre each includig cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and directed

Taking down shutter exc 1sqm and n.exc 2 sqm each.complete all as specified and directed

S&F for Pressed Steel Frames for doors 1.25 mm thick MS sheet of profile (105X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shock absorber 20mm dia, 60mm MS coduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paint complete all as specified and directed

S&F for Pressed Steel Frames for doors 1.25 mm thick MS sheet of profile (125X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shock absorber 20mm dia, 60mm MS coduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paint complete all as specified and directed

M&L for Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats including necessary form work complete all as specified and directed.

M & L for plain framed paneled shutters of any number of panels with panels of timber flat on both sides or of veneered particle board with face veneers supplied and fixed to chowkhats 35 mm thick second class hard wood. complete all as specified and directed

S&F Factory made 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed.

S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed and shown on Drawing No CEJZ/TD-1019/08 & CEJZ/TD-1020/08. complete all as specified and directed

S&F Factory made box type steel window with pintel hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed and shown on Drawing No CEJZ/TD-1019/08 & CEJZ/TD-1020/08.

S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed and shown on Drawing No CEJZ/TD-1019/08 sheet 1/3 to 3/3.

S&F Aluminium anodized barrel tower bolts, extruded section 150mm long.complete all as specified and directed

S&F Aluminium anodized handles, D type, 150mm long complete all as specified and directed

S&F aluminium sliding door bolt 300mm long, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate.complete all as specified and directed

S&F Mild steel framed work of Fe-290 grade E-165 as In grills/guard bars shouldered with steel window/ ventilator frame including red oxide primer coat complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames, glazed with putty or fixed with beads complete all as specified and directed

S&F 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads in squares n.exc 0.50 Sqm each pane complete all as specified and directed.

S&Fstainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.

M & L factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed . Make:-RAJSHRI / SINTEX/DUROPLAST

M & L factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supply & fixing in the frame at site as per specification and drawing in SSR complete all as specified and directed . Make:- RAJSHRI / SINTEX//DUROPLAST as approved by GE

S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.

S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed.

Taking up or down existing steel water tubing 15mm bore alongwith connection fixed/laid in any situation, complete all as specified and directed.

All as per item No 40 above but 20mm bore complete all as specified and directed.

S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F Galvanised iron steel water tubing,20 mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

Dismantling floor ,hearth or wall tiling including cement morter beddind (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M & L non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M &L lfor Glazed ceramic coloured tiles in vertical surfaces 300X200X7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over including 10 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces.complete all as specified and directed.

M & L Granite (of any type) 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing including screed bed of 20mm thick in meter cement mortar (1:6) complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar .complete all as specified and directed.

Taking down cement plaster or terrazzo from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering/plastering, 15 mm thick in cement mortar (1:4) on brick or concrete surfaces, surfaces finished fair and even cement complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished fair and even complete all as specified and directed

M&L for 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and directed.

M&L for Preparation of new plastered wall surfaces and applying two coats of cement base paint over a coat of white wash complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls & applying two coats of OBD over and including chalk whiting on plastered surfases complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified and directed.

S & F as in repair Vitreous china squatting pan orissa pattern size 580x440 mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe anti-syphonage pipe etc complete including making good to floor complete all as specified and directed.

S&F as in repair Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing complete all as specified and directed.

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair Bib tap of CP brass, 15mm bore, fency type screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. .

S&F in repair stop cock 15 mm cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe etc.complete all as specified and directed.

S&F as in repair Towel rail, 19mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs complete all as specified and directed.

S&F as in repair PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450 mm. complete all as specified and directed.

S&F as in repair 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass complete all as specified and directed.

S&F 1mm thick stainless steel sink, plugs, washers, PVC waste pipe, union, CP coupling & fixed in RCC cooking platform, overall size of sink 915mmx460mm, bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F in repairs decorative mild steel coloured curtain rod of 20 mm dia PVC coated approved pattern & design including side cups,rings @ 10 Nos per Rm & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs, complete all as specified and directed and directed

M & L Preparation of old treated surfaces of wall by brooming down or steel wire brushing all as directed and applying one coat of cement base paint on walls complete all as specified and directed and directed.

M & L Preparation of old treated surfaces of wall by brooming down or steel wire brushing all as directed and applying one coat of OBD on walls complete all as specified and directed and directed.

M & L preparation of old steel surfaces exceeding 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M & L Preparation of New steel surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

S&F in repair 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified and directed.

S&F in repairs 20 ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe(Min wt. 210 gms) complete all as specified and directed.

M&L for preparing old painted wooden surfaces, of any description over 10 cm girth & width and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantling asbestos cement (corrugated or semi corrugated) sheets in roof coveringh complete all as specified and directed.

fixing only old AC Sheet 6mm thick asbestos cement , corrugated or semi- corrugated sheets in roof .wall etc fixed with 'L' type or J type or cranked hooks complete all as specified and directed.

Dismanting timber scanteling 40 sq. cm and over in sec, in any position complete all as specified and directed.

M&L for 2nd class HW in scantling wrought timber complete all as specified and directed.

S&F 50 mm high density polyethelne (HDPE) pipes of pressure rating 6kgf/sq. cm complete all as specified and directed.

S&F PVC wall lining consisting of 5mm thick any colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

S & F 5mm thick PVC fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

M&L for preparation of old plastered/unplastered surfaces of ceiling and apply two coats of white wash complete all as specified and directed.

M&L for applying three coats of white wash on new wall surface including preparation of surface.complete all as specified and directed.

S&F Wash down water closet (pedestal pattern) vitreous china white including sheet cover,jet, connection to drain or out going pipe and to flushing pipe anti-syphonage pipe incl. stainless steel jet pressure etc, fixed in repairs, complete all as specified and directed.

S&F Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. 32 mm bore complete all as specified and directed.

S&F Bib tap 15mm bore standard of PTMT any colour screwed for iron pipe & fixed (min. weight 15mm - 90gms) complete all as specified and directed.

S&F Stop valve 15mm bore of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-90gms) complete all as specified and directed.

S&F PVC grating 100mm dia with waste hole of PTMT complete all as specified and directed.

S&F Towel rail 600mm long of PTMT fixed with and including CP screw and wooden/plastic cleats(minimum wt-190gm)complete all as specified and directed

S&F Pillar taps15mm bore of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-110gms) complete all as specified and directed.

S&F Ball valves high pressure of PTMT of 20 mm bore dia with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 15mm-142 gms/F 20mm-210 gms/25mm-455gms/ 40mm- 690 gms)

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebated incl joining cleat for fixing etc. complete all as specified and directed

S & F Anodiesed aluminium p door shutters aluminimum section weighing 0.55 Kg/m incl necessary joining cleats glazing clips, rubber neoprene packing, handles 2 nos in each doors , hinges, anodiesed aluminium snap beading screw etc complete all as specified and directed and directed.

S&F 6.3 mm thick sheet glass, ordinary quality in Aluminium door with solar control film 50 micron in squares exc 0.5 sqm each pane complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring ,overall length of cover plate 150mm,fixed in floor ,complete all as specified and directed.

S&F Brass mortice lock 75 mm,4 levers, vertical type, fixed to cupboard shutters, complete all as specified and directed.

S&F Hydraulic door closer of aluminium die cast body,designation No-3 universal type suitable for door shutter of 851 mm to 1000 mm weight between 61 Kg to 80 kg etc, complete all as specified and directed.

S&F MS butt hinges medium weight cold rolled 100mm long complete all as specified and directed

S&F Aluminium anodized barrel tower bolts, extruded section 200mm long.complete all as specified and directed

S&F Helical door spring 300mm with roller & roller plate complete all as specified and directed

M & L pre-laminated partical board 18/19 m thick , interior grade , Prelaminated both side with decorative choice lamination fixed with screws to timber frame work.complete all as specified and directed

M & L second class hard wood clean sawn battens sectional area exc 5 & n. exc 15 sq cm at 15 cm centre complete all as specified and directed

S & F mild steel butt hinge medium weight cold rolled 75 mm complete all as specified and directed

S & F Aluminium anodised barrel tower bolts 100mm long complete all as specified and directed

S & F 50 mm dia polished hard wood knobs fixed with screws complete all as specified and directed

S & F Haps and staples safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screw size of hasp and staple 100 mm complete all as specified and directed

Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/loose soil complete all as specified and directed.

M&L PCC 1:3:6 type C-2 using 40mm graded stone aggregates as in foundations bed of brick drain mass concrete complete all as specified and directed.

M&L Brick work in cement mortar 1:4 using sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls complete all as specified and directed.

M&L Brick work,using sub class B old size bricks laid on edge in brick floors, bedded and jointed in cement mortar 1:6 and pointed in cement mortar(1:6) as in top of drain complete all as specified and directed.

M&L Flush pointing in cement mortar (1:3) to brick work and as in drains etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc.complete all as specified and directed

Removal of surplus soil to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified and directed.

Returning, filling in, incl. spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft/ loose soil. complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 125mm long of extruded section.complete all as specified and directed

S&F Aluminium handles 125mm size, cast type, anodised complete all as specified and directed

S&F in repairs viterious china wash basin,white flat back,size (450X300) mm including ,waste coupling PTMT 32 mm low density polylethylene pipes (LDPE) 32 mm dia 80 cm long, but exculding chain and plug and porcelain stopper and bracket complete all as specified and directed.

Sruface dressing n exc 15 cm deep in soft/lose soil complete all as specified and directed.

M&L Form work to sides of floor or roof beams lintels cantilevers, shelves including support overhangs plinth bands etc complete all as specified and directed

M&L Form work to soffits of suspended roof slabs not exceeding 200 mm thick (horizontal or slopping rough finished surface of concrete complete all as specified and directed

M&L Form work to edges of concrete slabs n exc 20 cm thick complete all as specified and directed

M&L for 6 to 8 mm dia TMT mild steel bars and over cut to length bent to shape and required including cranking bending spirally for hooping for columns hooding ends and binding with and including mil steel wire (annealed) not less than 0-.9 mm dia or secureing with clips quality .complete all as specified and directed

M&L for reinforced cement concrete M-25 (20 mm graded aggregate) as Beams, cantilivers, bressummers lintles over 1.5 m span etc complete all as specified and directed

M&L for reinforced cement concrete M-25 (20 mm graded aggregate) as slabs supported on walls beams and columns in floors, roofs landings, balconies canopies deck slabs and in shelves and like etc complete all as specified and directed

S&F 150mm long MS barrel tower bolt stove enameled black, with bright bolt complete all as specified and directed

S&F 250mm long MS sliding door bolt plate type stove enameled black with bright bolt not less than 12mm dia with and incl a minimum of 6 botls and nuts, four on bolt plate and two on staple plate complete all as specified and directed

S&F 100mm long MS pressed handle oval type stove enameled black complete all as specified and directed

M&L Rendering 10mm thick on fair faces of brick work or conc surface in CM (1:6) even and smooth with out using extra cement.complete all as specified and directed

Supply only integral water proofing compound complete all as specified and directed

Spreading and levelling of soil obtain from excavation in layers n exc. 25 cm thick well ramming including watering as required complete all as specified and directed

M&L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surfacecomplete all as specified and directed

M&L Plain cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in foundation filling as mass concrete of post complete all as specified and directed.

M&L Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in floor topping, 40mm thick, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick seting coat in CM (1:3) finished over 10 mm thick cement mortar 1:4 in skirting finished fair and even without using extra cement complete all as specified and directed

M&L Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed

M&L 75 mm thick Hardcore of broken bricks of gauge n. exc 63mm, deposited spread and leveled in layers n exc 15 cm thick watered and rammed to a true surface in plinth protection complete all as specified and directed

M&L Kota stone slabs, 16mm thick, machine cut as in shelf, set and jointed in cement slurry over & including rendering coat of 15 mm thick in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and polishing complete all as specified and directed.

M&L for 75 mm thick cement concrete type C-2, 1:3:6 (using 40 mm graded aggregate) finished surface even and smooth without using extra cement complete all as specified and directed.

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thick M-35 grade over and including 25mm thick sand cushion all as specified and as directed.

M&L Cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in benching, kerbs, mud stop, rounded or chamfered on edges including form work complete all as specified and directed.

Roughening surface of old concrete floor by picking, sweeping clean and washing donw with water to remove dust, etc.complete all as specified and directed

M&L for screed bed of cement mortar 1:6, 15 mm thick for laying floor finish complete all as specified and directed

M&L for non skid coloured ceramic tiles (400x400mm)x7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in cloured cement to match the surface complete all as specified and directed

M&L for cement concrete type C-2 1:3:6 using 40mm graded stone aggergate as in foundations filling and mass concrete complete all as specified and directed

S&F Hand rails,half round or other stock section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts.posts and struts in fencing including cutting tops to shape as directed ,drilling holes,notching for wires,etc,flat iron fillets(for securing wire mesh etc.) including all necessary drilling,bolting or riveting etc.and similer work conforming to Fe-290 Gde E-165 (For Fencing) complete all as specified and directed

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. as directed (each line wire to be measured) complete all as specified and directed

S&F butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin , anodized and fixed , type C-21 complete all as specified and directed

Preparation of old decorated surface of wall and applying two coat of white wash complete all as specified and directed and directed.

S&F towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (min wt 170 gm) complete all as specified and directed

S&F 15 mm dia bib tap cast copper alloy chromium plated with crutch (or) butterfly handles, screwed down with pipes. Make : ESSCO/LEADER/ESS-ESS. complete all as specified and directed

S&F in repair Fency type stop valve chromium plated 15mm dia concealed type complete all as specified and directed and directed.

S&F 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms)

S&F grating doom125 mm dia with waste hole complete all as specified and directed

S&F as in repair Viterous China white bowl urinal flat back, size of 465 x 355 x 265 mm white (miniumum), with grating and union for discharge pipe, spreader , 40 mm dia PVC waste pipe upto floor trap , flush pipe , union for discharge pipe complete all as specified and directed.

S&F PVC pipe 32 mm dia as in waste pipe to wash hand basin complete all as specified and directed

S&F in repair Brass chromium plated soap dish performed type complete all as specified and directed

S&F in repair Vitreous china urinal partition white of size 310x700 mm.complete all as specified and directed

M&L for cement concrete type D-2 (1:4:8) 75 mm thick complete all as specified and directed

M&L surface excavation not exc 30cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in flors with grey cement and pigments over and including 15mm thick screed bed or bedding layer of CM 1:6 complete all as specified and directed.

Taking down carefully existig copper / alumn point wiring for light / fan / bell / socket 5/15 Amp points complete with fitting and fixtures such as switches, sockets, c/ rosess, holders and bracket fittings with battens / conduits / wires,T/L fittings and making good the disturbed surfaces of walls and roofs etc.and to match with existing colour complete all as specified and directed.

Taking down carefully unserviceable main switches and distribution boards with fuses/MCB's (single phase or three phase ) of any capacity all as specified and directed.

Taking down carefully old unserviceable sub main wiring and making good disturbed surfaces and matching with existing complete all as directed and specified

S&F Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia )duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets, sizes for mounting switch/sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed,stranded (Green colour) connected to common earth dolly omplete all as specified and directed for following : (a) One light/fan/bell/Bldg security light point controlled by one single pole one way switch.

All as per item No 175 above but one 3 pin 5 Amp socket outlet point controlled by one switch on Independent board. complete all as specified and directed.

All as per item No 175 above but one 3 pin 5 Amp socket outlet point controlled by one switch on same board. complete all as specified and directed.

All as per item No. 175 above but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated,stranded,unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed,stranded copper conductor cable. complete all as specified and directed.

All as per item No. 175 above but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 4.0 Sqmm PVC insulated,stranded,unsheated copper conductor on independednt board with continuous earth wire of size 4.0 Sqmm green colours PVC insulated, unsheathed,stranded copper conductor cable.

S&F Switch piano flush type 5 amps, single pole one way duly ISI marked complete all as specified and directed.

S&F Switch piano flush type 15 amps, single pole, one way ISI marked. complete all as specified and directed.

S&F Socket outlet 2 in 1 3 pin , 5 Amps, duly ISI marked. complete all as specified and directed.

S&F Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type duly ISI marked.

S&F bell push switch, flush type, 5 Amp, complete all as specified and directed.

S&F in repairs Bell buzzer single phase 220/240 volts (Make- Anchor/Usha/Bajaj) complete all as specified and directed.

S&F Ceiling rose surface type, bakelite 65 x 50mm, 2 to 3 terminals duly ISI marked complete all as specified and directed.

S&F in replacement of Lamp holder PVC/Polycarbonate type with cord grip cap suitable for pendant / batten/angle holder fitting complete all as specified and directed .Make-Havells, or Equivalent in PS. complete all as specified and directed.

S&F inrepairs stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 230 volts, 6 Amps, complete all as specified and directed. (Taking down of fans included in item No 1 hereinbefore).

S&F in replacement of regular batten for LED tube 18 W indoor decorative batten with extruded aluminium housing & opal diffuser IP-20 fixed to wall / ceiling etc complete, including LED tube of 18 W complete all as specified and directed. Make - Havells (REGALBATTENT 5UPTO1X18WDSBSWH) & (TITANIASLEE K1149T5DSTL18WLED865SPC)

S&F LED bulb of 10 watt complete all as specified and directed. Make-Havells, Model No-LED ADORE 10W B22 CDL BALL LAMP or Equivalent in PS.

S & F bldg LED Security light fittings 40 watts .including GI bracket bend to shape made out of GI pipe light grade 40 mm of suitable size up to 1.2 mtr long etc complete with MS clamps duly painted with two coats of aluminium paint with nuts/bolts/washers and all fixing arrangements to pole/wall including connecting up with 2 core cable all as specified and directed.Make- Crompton, Model-ASTRA, Cat Part No-LSTS-40-CDL or Equivalent OF HAVELLS/BAJAJ.

S&F 2x2 SKYLUX LED recessed classic design & glare soft Cool White illumination, white powder coated CRCA housing with LEDs,Seamless front frame with flat white high transmission acrylic cover luminaire of Make-Bajaj, Cat Part no- BZRSQL 36W Gzi CW or equivalent in Havells/Philips/CG.complete all as specified and directed.

S&F sheet metal enclosures Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB of 20 Amp for 25 Ltrs cap Geysers complete all as specified and directed.

S&F in repair Factory made sheet metal enclosures single door type made out of CRCA 1.2 mm thick M.S sheet, powder coated, concealed in wall, TPN DB with 200 Amps rated bus bar, 4 way, 415 volts, vertical type, dust and vermin proof,suitable for incorporation of MCBs duly cocealled in wall, factory made,including making good distrubbed surfaces with matching colour, complete all as specified and directed

S&F of MCCB Thermal based release adjustable type 4 pole 63 Amps 50 Hz 415 Volts with rupturing capacity 16 KA including testing,complete all as specified and as directed.

S&F Factory made sheet metal enclosures single door type made out of CRCA 1.2 mm thick M.S sheet,powder coated, SPN DB with 200 Amps rated bus bar, 8 way, FP-42 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCCBs duly cocealled in wall, factory made,including making good distrubbed surfaces with matching colour, complete all as specified and directed.

S&F in repairs MCB, SPN, 63 Amps, 240 volts duly ISI marked,omplete all as specified and directed.

S&F MCB single pole 240 volts, 06 to 32 Amps, 10 KA omplete all as specified and directed.

M&L for Sub main wiring with two single core 2x6 sqmm PVC insulated and unsheathed stranded copper conductor alongwith earth wire 6.0 sqmm drawn in PVC rigid conduit connected to main board complete all as specified and directed (Two runs cable and one number earth wire and suitable PVC conduit shall measured together as unit length).

S&F 300 mm sweep exhaust fan, heavy duty, 900 RPM with louvers, AC single phase 230/240 V and all integral accessories, including making suitable hole in wall and making good to match with existing surface, complete all as specified and as directed. Make: Havells/ Bajaj/Crompton/Khaitan

Cutting holes making good the distributed surface, grouting nuts for fixing of Exhaust fans complete all as specified and directed.

S&F stationary water heater (Geyser) vertical storage type, electric driven, closed vented type (5 star rated marked) of capacity 25 Ltrs, omplete all as specified and directed. . Make-Havells Cat Part No. GHWENZTWG025 or equivalent in CG, Bajaj,RECOLD.

S&F PVC connection of 15mm dia 45 cm long with 02 Nos of unions and washers with steel reinforcement materials suitable for hot water supply omplete all as specified and directed.

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shallbe provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to sxposed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) .complete all as specified and directed.

S&F as in repairs Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanised iron or steel wire. omplete all as specified and directed.

S&F as in repairs XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 25 Sqmm nominal cross section, 4 core, flat or circular, PVC FRLS insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC FRLS sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing and testing, omplete all as specified and directed.

S&F in repairs Mild steel galvanised pipe, light grade, 40 mm nominal bore for passing of cable, fixed to poles/walls, laid under floor/road crossings, complete with and including clamps socket & elbow etc omplete all as specified and directed.

M&L Dry and clean fine sand for cable cushioning to underground cable protection, omplete all as specified and directed. (Excavation and earth work measured separately).Note- Punned down thickness shall be measured.

S&F in repair Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cableomplete all as specified and directed. (Excavation and earth work measured separately).

S.R. Kaura and Company

GS and Co

ABHISHEK AND COMPANY

M/S Yashpaul Gulati

M/S N Maini Constrution

RAKESH KUMAR SATISH KUMAR