Repair / renovation of Govt. Qtr. No. 19-A, 20-A, 26-A and 28-A at Gandhi Nagar Jammu. CNO-463 NP

Removing of dry oil bound distemper by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Finishing walls with Acrylic smooth exterior paint of required shade: 13.119.1 Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface)

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured.

Providing/ fixing of link Slider Aluminium profile shutter complete job.

Providing/ fixing of PVC wall panneling of specified designe and patteren as per direction of EIC.

Labour engaged for shifting of furniture and cleaning of glass panes and allied works

Carpenter engaged for repair to doors and window shutters

Renewing glass panes, with putty and nails wherever necessary including raking out old putty : 14.6.1 Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

Providing/ fixing PCP sumo panel, lover panel (wall panelling) complete job incl. high llighter

Providin/ fixing wall paper of specified shade and patteren as per direction EIC.

Providing / fixing flush door shutter 35mm thick fixing mica on both side complete job

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class deodar wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : 35mm thick Second class deodar wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class deodar wood 35mm thick

Providing and laying Ceramic glazed floor tiles 2' x4' of 1st quality of approved make, laid on 20mm thick bedofcement mortar1:4 (1cement: 4coarsesand)including pointing the joints with white cement and matching pigment etc., complete.

Providing and laying Ceramic glazed wall tiles 2' x 4' of 1st quality of approved make, laid on 12mm thick bed of cement mortar 1:4 (1cement: 4coarsesand)including pointing the joints with white cement and matching pigment etc., complete

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 75 mm diametre

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diametre

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints 19.3.2 Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.19.3.2.1 15mm nominal outer dia pipes

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work in super in super structure

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and fixing of following Sanitary items fittings of approved make / specification as directed by E.I.C (Cera, Jaquar, Hindware or equivalent ) Angular Stop Cock

Bib Cock Short Body

Soap Dish Holder

Soap Dispenser bottle

Single Lever Basin Mixer

Single Lever Wall Mixer

Towel Rod

Glass Shelf

Hand Shower Health faucet

Towel Ring

Corner Glass Shelf 3 in 1

Wall Hang Basin with pedestal

White vitreous china single piece, double traps syphonicwater closet of approved brand /make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings ,nuts, bolt sandgasketetc including making connection with existing P/Strap, complete in all respect as per directions of Engineer-in-Charge.

Over Head Shower 150x150 mm

Looking Mirror 600x450 mm

Toilet Paper Holder

C.P. Grating

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe 32 mm dia

Providing and fixing uplasticized PVC connection pipe with brass unions 19.15.2.1 15 mm nominal bore

Kitchen sink mixier

Cubical Tuffen Glass 3'x7'

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separatelyThree track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto1.75 sqm

Structural steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required

Supplying and stacking of Good Earth at site.

Spreading of sludge, dump manure or/and good earth in required thickness as per directions of officer in-charge

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing/ fixing of 1 H.P. pressure pump of approved make as per the direction of Engineer in charge

Construction of brick masonry manhole in cement mortar 1:4 mix with RCC top slab 1:1/5:3 mix complete job in side size 90x80x45 cm deep incl. CI cover

Providing and fixing of following items of approved make /quality including fixing carriage etc. complete job as directed by E.I.C 6 mm ply (Archid, Century, green )

Providing and fixing of following items of approved make /quality including fixing carriage etc. complete job as directed by E.I.C 19 mm ply (Archid, Century, green )

Providing and fixing of following items of approved make /quality including fixing carriage etc. complete job as directed by E.I.C 0.8 mm thick Sunmica (Virgo )

Providing and fixing of following items of approved make /quality including fixing carriage etc. complete job as directed by E.I.C 1 mm thick Sunmica (Virgo )

Providing and fixing of following Sanitary items fittings of approved make / specification as directed by E.I.C (Cera, Jaquar, Hindware or equivalent ) S.S Handle 6"

Multi propos lock

Folding handles 6"

Sliding channel 20"

Edge tape 20mm

Hydrolic door closed heavy

Main door lock goderaj

8mm thick glass

Catcher

Stain less steel curtain rod

Trolley engaging for removal of unserviceable material incl. loading unloading to proper site of disposal.