Repair and maintenance of HRTC workshop Quarters and Office at Keylong Distt Lahaul and Spiti H P

Amount

Finishing with Deluxe Multi surface paint system for interiors using and exteriors using Primer as per manufacturers Two or more coats applied on walls @ 1.25 ltr /10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr /10 sqm over an under coat of primer applied @ 0.75 ltr /10 sqm of approved brand manufacture, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

20mm (twenty millimeter) cement plaster of mix 1:6 (one cement isto six fine sand) including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and applying white cement based putty or average thickness 1 mm (one millimeter), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Dismantling roofing including ridges, hips, valleys and gutters and G.S Sheet etc. stacking the material and handing over to the Department , with all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing corrugated G.S. sheet roofing inciuding vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.63 mm thick with zinc coating not less than 275 gm/m2, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing ridges or hips of width 60 cm (sixty centimeter)overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm (eight millimeter) dia G.I. limpet and bitumen washers complete 0.63 mm (zero point six three millimeter) thick with zinc coating not less than 275 gm/m2, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts , nuts, cutting rivets, welding etc. including dismembering and stacking within all lead. including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge. Serviciable material to be handed over to the Deptt.

Dharmender Kumar

Keshav ram

DESH RAJ