Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.2 LAccepted-AOC | ₹41.2 L Quoted ₹42.5 L | L1 | Accepted-AOC LOWEST |
| 2 | L2₹47.0 L+₹4.5 L (10.7%)Rejected-Finance | ₹47.0 L+₹4.5 L (10.7%) | L2 | Rejected-Finance OTHER THAN LOWEST |
| 3 | L3₹48.8 L+₹6.3 L (14.8%)Rejected-Finance D 91 BLOCK D AMITY GREEN HASEMAU LUCKNOW PIN 226028 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226028 | ₹48.8 L+₹6.3 L (14.8%) | L3 | Rejected-Finance OTHER THAN LOWEST |
| 4 | L4₹48.9 L+₹6.5 L (15.3%)Rejected-Finance | ₹48.9 L+₹6.5 L (15.3%) | L4 | Rejected-Finance OTHER THAN LOWEST |
| 5 | L5₹49.2 L+₹6.8 L (16.0%)Rejected-Finance 73 ASHOTOSH NAGAR NEAR KUNDAN GENERAL STORE OPP SARAD TIMBER P O MANAS NAGAR KRISHNA NAGAR LUCKNOW 226023 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226023 | ₹49.2 L+₹6.8 L (16.0%) | L5 | Rejected-Finance OTHER THAN LOWEST |
| Sl No | Description | Qty | Unit | M/s Chandra Mohan and Sons L4 | M/S KAUSHIK CONSTRUCTION L7 | M/s Bhadoria Associates L8 | R K CONTRACTOR AND SUPPLIERS L10 | Spectrum Enterprises L6 | M/S SWATI CONSTRUCTION L1 | M/s Sachkhand Traders L2 | SIDDHI VINAYAK CONSTRUCTION L9 | Matrubhoomi Construction L3 | suniltraders L5 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M & L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate and mixed with 2% integral water proofing compound as in padding over roof slab, finished surface even and smooth without using extra cement including demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
NOTE: (i) WPC shall measured and paid seperately. | 100 | Cum | 5,500 ₹5,50,000 | 5,500 ₹5,50,000 | 4,800 ₹4,80,000 | 4,000 ₹4,00,000 | 5,000 ₹5,00,000 | 3,888 ₹3,88,800 | 4,000 ₹4,00,000 | 3,000 ₹3,00,000 Lowest | 4,500 ₹4,50,000 | 3,000 ₹3,00,000 Lowest |
| 2.00 | Supply only Integral water proofing compound confirming to IS-2645-2003 of approved make complete all as specified and directed | 300 | Kg | 80 ₹24,000 | 100 ₹30,000 | 80 ₹24,000 | 50 ₹15,000 | 50 ₹15,000 | 40 ₹12,000 Lowest | 40 ₹12,000 Lowest | 200 ₹60,000 | 75 ₹22,500 | 40 ₹12,000 Lowest |
| 3.00 | Providing & laying polymer, water proofing compound & fiber based ready mix plaster for rendering 15 mm thick in CM (1:4) over roof surfaces, finished even & smooth without using extra cement complete as per manufacturer's instructions or as specified by Engineer-in-charge. | 3,000 | Sqm | 300 ₹9,00,000 | 300 ₹9,00,000 | 400 ₹12,00,000 | 400 ₹12,00,000 | 380 ₹11,40,000 | 250 ₹7,50,000 | 300 ₹9,00,000 | 250 ₹7,50,000 | 223 ₹6,69,000 Lowest | 300 ₹9,00,000 |
| 4.00 | (a) Taking down existing water proofing treatment and cleaning of roof surface by washing and rubbing etc. and removing the retrieved material to a distance not exceeding 500m where directed.
(b) Providing and applying fibre reinforced liquid applied elastomeric membrane made of Hybrid PU polymers by self priming with 30% water dilution and let it dry for 4-6hrs. Further apply 2 coats of waterproofing treatment fibre reinforced liquid applied elastomeric membrane made of hybrid PU polymers in a gap of 4-6hrs. The applied material should have specific gravity of 1.25g/cc with minimum recommended coverage of 1sqm/litre to built DFT of 1200 microns. the cured membrane shall exhibit -
1. ) Tensile Strength ASTM D412 : 1.4-2.5 MPa
2.) Elongation ASTM D412 : 400-500%
3.) Adhesion Strength : >2N/sqm as per ASTM D4541
4.) Crack Bridging Ability : >3-4mm as per AS/NZS 4548:5:1999
5.) Water Permeability : NIL as per DIN 1048
(c) Providing and installing non-woven geo-textile membrane 40-50gsm with overlaps of 50mm in both directions over the Ist coat when the surface is still tacky.
Note: Total hybrid PU polymer including primer and two coats will appllied @2 Kg/Sqm | 3,000 | Sqm | 550 ₹16,50,000 | 500 ₹15,00,000 | 525 ₹15,75,000 | 550 ₹16,50,000 | 480 ₹14,40,000 | 450 ₹13,50,000 Lowest | 527 ₹15,81,000 | 650 ₹19,50,000 | 600 ₹18,00,000 | 570 ₹17,10,000 |
| 5.00 | (a) Taking down existing water proofing treatment and cleaning of roof surface by washing and rubbing etc. and removing the retrieved material to a distance not exceeding 500m where directed.
(b) Providing and applying fibre reinforced liquid applied elastomeric membrane made of Hybrid PU polymers by self priming with 30% water dilution and let it dry for 4-6hrs. Further apply 2 coats of waterproofing treatment fibre reinforced liquid applied elastomeric membrane made of hybrid PU polymers in a gap of 4-6hrs. The applied material should have specific gravity of 1.25g/cc with minimum recommended coverage of 1sqm/litre to built DFT of 1200 microns. the cured membrane shall exhibit -
1. ) Tensile Strength ASTM D412 : 1.4-2.5 MPa
2.) Elongation ASTM D412 : 400-500%
3.) Adhesion Strength : >2N/sqm as per ASTM D4541
4.) Crack Bridging Ability : >3-4mm as per AS/NZS 4548:5:1999
5.) Water Permeability : NIL as per DIN 1048
(c) Providing and installing non-woven geo-textile membrane 40-50gsm with overlaps of 50mm in both directions over the Ist coat when the surface is still tacky.
(d) M&L for machine pressed chequered cement concrete tiles of size 250x250x20mm thick, set, jointed over and including 15mm thick screed in CM 1:4 and pointed in CM (1:3) complete all as specified and directed. | 400 | Sqm | 1,200 ₹4,80,000 | 900 ₹3,60,000 | 550 ₹2,20,000 | 1,200 ₹4,80,000 | 490 ₹1,96,000 Lowest | 950 ₹3,80,000 | 1,000 ₹4,00,000 | 700 ₹2,80,000 | 980 ₹3,92,000 | 1,200 ₹4,80,000 |
| 6.00 | M & L for provn of roof treatment with polymeric water proofing membrane all as given below:-
(a) Preparation of old AC/Manglore tiles roof surfaces including cleaning of roof surface by washing and rubbing etc. and removing the retrieved material to a distance not exceeding 500m where directed.
(b) Applying a coat of Bitumen, blown type, 85/25 grade on prepared surface of AC/Mangalore pattern roof .
(c) Applying and laying 2 mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3.
(d) M & L for applying two coats of aluminium paint on membrane @ 0.10 Kg/Sqm (each coat) complete all as specified and directed. | 200 | Sqm | 700 ₹1,40,000 | 600 ₹1,20,000 | 550 ₹1,10,000 | 700 ₹1,40,000 | 400 ₹80,000 Lowest | 490 ₹98,000 | 500 ₹1,00,000 | 700 ₹1,40,000 | 600 ₹1,20,000 | 550 ₹1,10,000 |
| 7.00 | M & L for repairing of cracks by cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed. | 100 | RM | 60 ₹6,000 | 100 ₹10,000 | 50 ₹5,000 | 20 ₹2,000 Lowest | 200 ₹20,000 | 145 ₹14,500 | 60 ₹6,000 | 100 ₹10,000 | 40 ₹4,000 | 62 ₹6,200 |
| 8.00 | M & L for cleaning the exposed concrete surface of floor/ wall/ chajja by brushing & watering and applying one coat of TAPECRETE P-151 Acrylic Polymer Modified Cementitious slurry consisting 1:2 (1 part of tapecrete : 2 parts of cement by weight) and shall be allowed to dry for 4-6 hours, then applying second coat of 1.5mm thick tapecrete brush topping consisting 1:2:2 (1 part of tapecrete : 2 parts of cement : 2 parts of silica sand by weight) over the first coat and cured for next 2 days complete all as specified and directed. | 200 | Sqm | 120 ₹24,000 | 400 ₹80,000 | 150 ₹30,000 | 50 ₹10,000 Lowest | 180 ₹36,000 | 140 ₹28,000 | 160 ₹32,000 | 200 ₹40,000 | 325 ₹65,000 | 170 ₹34,000 |
| 9.00 | M & L for cleaning and removal of vegetation plant of girth not exc. 20cm with roots from the roof surface and making good to disturbed surface in CM 1:4 or PCC 1:2:4 type B-0 as required at site including removal of same material to a distance n. exc. 50m complete all as specified and directed.
NOTE: The work shall be executed up to 12.50m height of bldg with all safety measures and no extra payment shall be paid to contractor on this account. | 200 | Sqm | 80 ₹16,000 | 50 ₹10,000 | 200 ₹40,000 | 20 ₹4,000 Lowest | 180 ₹36,000 | 111 ₹22,200 | 40 ₹8,000 | 250 ₹50,000 | 180 ₹36,000 | 50 ₹10,000 |
| 10.00 | M & L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other bands, plinth courses, string cources, lacing cources, parapets and railing upto 60cm in hight, copings, kneelers, apex stones, bed plates, water troughs, hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed. | 5 | Cum | 5,500 ₹27,500 | 6,000 ₹30,000 | 4,800 ₹24,000 | 2,500 ₹12,500 Lowest | 6,000 ₹30,000 | 5,000 ₹25,000 | 5,000 ₹25,000 | 3,000 ₹15,000 | 4,000 ₹20,000 | 5,500 ₹27,500 |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
9 Jul 2026, 6:00 pmClosed
GE (WEST) LUCKNOW
GE (WEST) LUCKNOW PIN 226002 C/O 56 APO
REPAIR/ MAINT TO ROOF TREATMENT LEAKAGE/ SEEPAGE AND INTERNAL/EXTERNAL SURFACES OF ZONE B AREA OF AGE B/R-I UNDER GE (WEST) LUCKNOW
2026_MES_764708_2
GE/W/LKO/T-12 OF 2026-27
Open Tender
Civil Works
Item Rate
240 days
LUCKNOW
AS PER NIT AND TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (WEST) LUCKNOW
₹99,800
Yes
5 Sept 2026
25 Jun 2026
11 Jul 2026
25 Jun 2026
9 Jul 2026
2 Jul 2026
25 Jun 2026 - 28 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M & L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate and mixed with 2% integral water proofing compound as in padding over roof slab, finished surface even and smooth without using extra cement including demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
NOTE: (i) WPC shall measured and paid seperately. | 100 | Cum | - | - |
| 2 | Supply only Integral water proofing compound confirming to IS-2645-2003 of approved make complete all as specified and directed | 300 | Kg | - | - |
| 3 | Providing & laying polymer, water proofing compound & fiber based ready mix plaster for rendering 15 mm thick in CM (1:4) over roof surfaces, finished even & smooth without using extra cement complete as per manufacturer's instructions or as specified by Engineer-in-charge. | 3,000 | Sqm | - | - |
| 4 | (a) Taking down existing water proofing treatment and cleaning of roof surface by washing and rubbing etc. and removing the retrieved material to a distance not exceeding 500m where directed.
(b) Providing and applying fibre reinforced liquid applied elastomeric membrane made of Hybrid PU polymers by self priming with 30% water dilution and let it dry for 4-6hrs. Further apply 2 coats of waterproofing treatment fibre reinforced liquid applied elastomeric membrane made of hybrid PU polymers in a gap of 4-6hrs. The applied material should have specific gravity of 1.25g/cc with minimum recommended coverage of 1sqm/litre to built DFT of 1200 microns. the cured membrane shall exhibit -
1. ) Tensile Strength ASTM D412 : 1.4-2.5 MPa
2.) Elongation ASTM D412 : 400-500%
3.) Adhesion Strength : >2N/sqm as per ASTM D4541
4.) Crack Bridging Ability : >3-4mm as per AS/NZS 4548:5:1999
5.) Water Permeability : NIL as per DIN 1048
(c) Providing and installing non-woven geo-textile membrane 40-50gsm with overlaps of 50mm in both directions over the Ist coat when the surface is still tacky.
Note: Total hybrid PU polymer including primer and two coats will appllied @2 Kg/Sqm | 3,000 | Sqm | - | - |
| 5 | (a) Taking down existing water proofing treatment and cleaning of roof surface by washing and rubbing etc. and removing the retrieved material to a distance not exceeding 500m where directed.
(b) Providing and applying fibre reinforced liquid applied elastomeric membrane made of Hybrid PU polymers by self priming with 30% water dilution and let it dry for 4-6hrs. Further apply 2 coats of waterproofing treatment fibre reinforced liquid applied elastomeric membrane made of hybrid PU polymers in a gap of 4-6hrs. The applied material should have specific gravity of 1.25g/cc with minimum recommended coverage of 1sqm/litre to built DFT of 1200 microns. the cured membrane shall exhibit -
1. ) Tensile Strength ASTM D412 : 1.4-2.5 MPa
2.) Elongation ASTM D412 : 400-500%
3.) Adhesion Strength : >2N/sqm as per ASTM D4541
4.) Crack Bridging Ability : >3-4mm as per AS/NZS 4548:5:1999
5.) Water Permeability : NIL as per DIN 1048
(c) Providing and installing non-woven geo-textile membrane 40-50gsm with overlaps of 50mm in both directions over the Ist coat when the surface is still tacky.
(d) M&L for machine pressed chequered cement concrete tiles of size 250x250x20mm thick, set, jointed over and including 15mm thick screed in CM 1:4 and pointed in CM (1:3) complete all as specified and directed. | 400 | Sqm | - | - |
| 6 | M & L for provn of roof treatment with polymeric water proofing membrane all as given below:-
(a) Preparation of old AC/Manglore tiles roof surfaces including cleaning of roof surface by washing and rubbing etc. and removing the retrieved material to a distance not exceeding 500m where directed.
(b) Applying a coat of Bitumen, blown type, 85/25 grade on prepared surface of AC/Mangalore pattern roof .
(c) Applying and laying 2 mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3.
(d) M & L for applying two coats of aluminium paint on membrane @ 0.10 Kg/Sqm (each coat) complete all as specified and directed. | 200 | Sqm | - | - |
| 7 | M & L for repairing of cracks by cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed. | 100 | RM | - | - |
| 8 | M & L for cleaning the exposed concrete surface of floor/ wall/ chajja by brushing & watering and applying one coat of TAPECRETE P-151 Acrylic Polymer Modified Cementitious slurry consisting 1:2 (1 part of tapecrete : 2 parts of cement by weight) and shall be allowed to dry for 4-6 hours, then applying second coat of 1.5mm thick tapecrete brush topping consisting 1:2:2 (1 part of tapecrete : 2 parts of cement : 2 parts of silica sand by weight) over the first coat and cured for next 2 days complete all as specified and directed. | 200 | Sqm | - | - |
| 9 | M & L for cleaning and removal of vegetation plant of girth not exc. 20cm with roots from the roof surface and making good to disturbed surface in CM 1:4 or PCC 1:2:4 type B-0 as required at site including removal of same material to a distance n. exc. 50m complete all as specified and directed.
NOTE: The work shall be executed up to 12.50m height of bldg with all safety measures and no extra payment shall be paid to contractor on this account. | 200 | Sqm | - | - |
| 10 | M & L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other bands, plinth courses, string cources, lacing cources, parapets and railing upto 60cm in hight, copings, kneelers, apex stones, bed plates, water troughs, hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed. | 5 | Cum | - | - |
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.39 MB
REVTENDER12.pdf
Tender Documents • 1.48 MB
REVISEDNIT.pdf
Additional Documents • 0.39 MB
BOQ_867558.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .