Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹9.0 LAccepted-Finance | ₹9.0 L | 1 | Accepted-Finance OK |
| 2 | 2₹9.1 L+₹17,932.96 (2.00%)Accepted-Finance | ₹9.1 L+₹17,932.96 (2.00%) | 2 | Accepted-Finance OK |
Tender Value
₹9.0 L
EMD Value
₹17,940
Closing Date
11 Aug 2026, 10:00 amClosed
executive officer
EXECUTIVE OFFICER
VIJAY TOPI TUBE WELL
2026_DLB_582220_1
502
Open Tender
Civil Works
Percentage
30 days
WORK
gst aadhar pan card emd fees, pross fees
2 documents required · 2 mandatory
₹500
executive officer nagar palika mahwa
₹17,940
Yes
14 Aug 2026
5 Aug 2026
11 Aug 2026
5 Aug 2026
11 Aug 2026
5 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Construction of Tube-well upto 100 Meter depth and above in all
type of rocks by DTH system and over burden to accommodate
casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes but excluding cost of casing pipesas per IS : 2800 (Part I & II) 1979 specifications. The work would becompleted after obtaining sand free water. The tube well shouldhave a throughout bore as per nominal dia of casing pipe20.1.4 200 mm dia Nominal bore metre 1,407.00 | 100 | mtr | 1,407 | ₹1,40,700 |
| 2 | Construction of tube-well from ground levels to accommodate
housing and assembly pipe of following sizes in all types of alluvium strata by percussion/ rotary drilling method and with gravel as per IS:4097-1967 and packing as per IS:2800 (Part I -& II) 1979 as amended upto date (the work includes the cost of gravel & its primary packing and packing during development, lowering of housing & strainer assembly pipes, with supply and wrapping of coirrope, wherever necessary for arresting fine sand particles. The workwill not include cost of housing pipe and strainer pipe assembly anddevelopment work, but work would be completed after obtaining
sand free water).Upto 100 Meter depth20.2.1.2 Nominal bore 200 mm dia metre 1,767.00 | 110 | metre | 1,767 | ₹1,94,370 |
| 3 | 20.3 Development of tube well as per IS specification using suitablecompressor to give sand free water for required yield of the gravelpacked tube well. hour 610.00 | 10 | hour | 610 | ₹6,100 |
| 4 | Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/1992)
of grade Fe410 of following nominal bore sizes at site of work20.4.4 200 mm dia metre 1,839.00 | 110 | metre | 1,839 | ₹2,02,290 |
| 5 | 20.10 Providing & lowering of G.I. flange pipe B Class including rubberwasher and nuts of 8 mm dia complete in all respect. 20.10.1 50 mm dia metre 656.00 | 120 | metre | 656 | ₹78,720 |
| 6 | 150 mm diameter Submersible pump shall have following HPRating, phase, Head range, Discharge range respectively12.5 HP, 3-Ø, (78 - 126)Mtr, (395-245) LPM | 1 | each | 80,949 | ₹80,949 |
| 7 | 150 mm diameter Submersible pump shall have following HPRating, phase, Head range, Discharge range respectively12.5 HP, 3-Ø, (78 - 126)Mtr, (395-245) LPM | 1 | each | 5,468 | ₹5,468 |
| 8 | 20.9 Installation of submersible motor pump set in tube-well/open wellcomplete (labour charges only) including transportation of tripod,chain pulley block & any other material required for loweringpurpose. each 5,468.00 | 260 | MTR | 502 | ₹1,30,520 |
| 9 | P/Laying ISI marked P.V.C. insulated submersible cable confirmingto(IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire shouldbe made from 99.90 % purity copper, stranding in acc. toIS:8130/IEC 60228 for lower watt loss , oxygen free for lesschances of oxidization, insulation PVC type A/C/D , flame retardantas per IS 10810-53, better amperage rating as per IS:3961 part 5,existing pipe / open trench / Cable tray / on surface including makingconnection etc. as required. For additional technical parameters of
product / work refer Annexure 'A' attached with this BSR53.7.5 10.0 Sq.mm 3 core flat / Round Mtr. 502.00 | 120 | MTR | 55 | ₹6,600 |
| 10 | Providing & Laying of Polypropylene rope Confirming to IS:5175 forsubmersible pump of following sizes. complete in all respect. All asper pre approved by Engineer in-charge. For additional technicalparameters of products/ work , refer Annexure "A" attached withthis BSR .70.3.2 16mm (suitable above 50mm & up to 75mm OD pipe) Mtr. 55.00 | 1 | each | 876 | ₹876 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.37 MB
BOQ_1034459.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .