WELCOME SERVICES AND CERTAIN MISC REPAIR INCLUDING E/M WORKS OF MD OFFICERS ACCN UNDER AGE B/R-I (EAST) OF GE (EAST) JALANDHAR CANTT

Amount

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed complete all as specified and directed

Taking down cement plaster on brick/stone masonry any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.

Demolition of brick work as in walls/ parapet walls removing grass fungus weed, roots of trees completely, grown on roof/ wall surfaces complete all as specified and directed.

Material and labour for brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:6) complete all as specified and directed.

All as per Ser item No 5.00 above but except bricks

Material and labour for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands plinth cources, roof kerbs or mud stops, benching, coping, bed plates, parapets, water throughs and the like etc including weathering, slightly rounded or chamfered angles throating, edges of interlocking/ chequered tiles etc complete including necessary form work complete all as specified and directed.

Dismantling of brick tiles single layer as in roof covering all as specified and directed.

Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

Wire brushing and cleaning top surface of cement concrete including flashing and junction of parapets etc and applying neat cement slurry with 3.0 Kg of cement per Sqm, complete all as specified and directed

Material and labour for plain cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in foundations, filling and mass concrete, roof padding etc. (average thickness 50mm) complete all as specified and directed.

Material and labour for applying a coat of hot blown paving industrial bitumen 85/ 25 @ 1.20 kg/ sqm over a coat of primer @ 0.3 litre per sqm over the roof surface including cleaning surfaces complete all as specified and directed.

Material and labour for APP based polymeric membrane minimum weighing 3kg/ sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gms/ sqm) laid on primed surface by forced application complete all as specified and directed.

Material and labour for brick tile terracing with 40mm thick brick tiles laid over and including 15mm thick screed in cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement including flush pointing in cement mortar (1:3) as separate operation complete all as specified and directed.

All as per Ser item No 14.00 above but except brick tiles.

Material and labour for racking out joints/ pointing to brick tiles 30cm by 15cm laid flats as in floors, roofs, ceiling, chajjas etc in cement mortar (1:3) compete all as specified and directed

Material and labour for 15mm thick rendering in cement plaster on brick or concrete surfaces in cement mortar (1:3) in two layer of 10mm & 5mm mixed with integral water proofing compound @ 3% by weight of cement in top 5mm thick and finishing the surface even and smooth using extra cement complete all as specified and directed. (WPC shall be measured and paid separately).

Supply only integral water proofing compound complete all as specified and directed.

Material and labour for PCC (1:7:12) type F-2 using 40mm graded brick aggregate as in filling, mass concrete laid and compacted complete all as specified and directed.

Material and labour for PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in coved fillet at junction of roof & parapet wall and other vertical surfaces 75mm radius and surface painted with a hot paving bitumen grade 30/40 conforming to IS-73 @ 0.70 Kg/Sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr/ Sqm complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles of size 400 x 400 x 7 to 8mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

Material and labour for vitrified ceramic tiles 10mm thick, any shade as approved, polished area of each tiles n.exc. 0.36 Sqm (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15mm thick rendering in cement mortar (1:6) to fix tiles complete all as specified and directed.

Material and labour for vitrified ceramic tiles 8 to 10mm thick, any shade as approved, polished area of each tiles n.exc. 0.36 Sqm (square/ rectangular) in vertical surfaces such as skirting/ dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including rendering 10mm thick in cement mortar (1:4) complete all as specified and directed.

Material and labour for heavy duty vitrified coloured ceramic tiles 9 to 10mm thick, in floors, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles over and including screed bed or bedding layer 15mm thick in CM (1:6) complete all as specified and directed.

Material and labour for heavy duty vitrified coloured ceramic tiles 9 to 10mm thick, in vertical surface i.e. skirting dado, etc., set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles over and including screed plaster 10mm thick in CM (1:4) complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles of size 350 x 250 x 7mm/ 450 x 300 x 7mm thick as in vertical surfaces i.e. skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including 10mm thick in cement mortar (1:4) finished rough to fix tiles complete all as specified and directed. Note : Screed bed will be measured and piad separately under relevant items

Material and labour for Granite (of any type) work 16 to 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, hand wash places and like including necessary cutting and grooving to walls and making good including 15mm thick in cement mortar (1:6) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite complete all as specified and directed.

Material and labour for 15mm thick cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 5mm thick rendering in patches n. exc. 3 sqm each patch in cement mortar (1:3) as on ceiling and finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for 15mm thick cement plaster in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer and one coat of birla white putty complete all as specified and directed.

Material and labour for preparation of new plastered surface of wall and applying three coats of white washing complete all as specified and directed.

Material and labour for preparation of new plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.

Material and labour for preparation of newly plastered surface of walls and applying two coats of cement base paint complete all as specified and directed.

Material and labour for preparation of old surfaces of ceiling including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc. on plastered or un plastered surfaces and applying one coat of white wash complete all as specified.

Material and labour for preparation of old surfaces of walls including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc. on plastered or un-plastered surfaces and applying one coat of white wash complete all as specified.

Material and labour for preparation of old decorated surfaces of walls, including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper complete all as specified and directed.

All as per srl item No. 37.00 above but two coats of oil bound distemper.

Material and labour for complete removal of existing treatment from wall surface and applying two coat of oil bound distemper over one a coat of 1mm average thick wall putty white cement base (JK & Birla) and making smooth finish complete all as specified and directed

All as per Srl item No. 39.00 above but two coats of plastic emulsion paint.

Material and labour for preparation of old decorated plastered or un-plastered surfaces of walls including cornices, pilasters etc and applying one coat of cement base paint complete all as specified and directed.

Material and labour for preparation of new wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n. exc. 1.5 Sqm each for doors and windows complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc. 1.5 Sqm but n. exc. 4 sqm each for doors and windows complete all as specified and directed.

Taking down shutters of any description n.exc. 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm and n. exc. 2 sqm each complete all as specified and directed.

Refixing of shutters of any description in same opening n.exc 1.0 Sqm each after easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and directed

Refixing of shutters of any description in same opening exc 1.0 but n.exc 2.0 Sqm each after easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and directed

Material and labour for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-290 Gde-E-165 complete including drilled for fixing of steel sheeting or other covering; doors, door frame chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed.

Supply and fixing 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed

Material and labour for 35mm thick 2nd class hard wood factory made plain framed, paneled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of veneered particle board 12mm thick with commercial veneering on both faces with rails and style. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fixing factory made 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including 25 x 6mm thick 2nd class hard wood lipping on edge complete all as specified and directed.

Material and labour for 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.

Supply and fixing Prayag Syment butt hinges 100mm long all as specified and directed.

Supply and fixing Prayag Syment tower bolt 200mm long all as specified and directed.

Supply and fixing Prayag Syment bow handle 125mm long all as specified and directed.

Material and labour for mild steel sliding door bolts 300mm long plate type stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate fixed complete all as specified and directed.

Material and labour for mild steel sliding door bolts 300mm long plate type stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate fixed in repairs complete all as specified and directed.

Supply and fixing 100mm size mild steel butt hinges, medium weight, cold rolled and fixed with screws/welded to frame fixed complete all as specified and directed.

Supply and fixing 100mm size mild steel butt hinges, medium weight, cold rolled and fixed with screws/welded to frame fixed in repairs complete all as specified and directed.

Supply and fixing MS barrel tower bolt 200mm long stove enameled black with bright bolt and fixed complete all as specified and directed.

Supply and fixing MS barrel tower bolt 200mm long stove enameled black with bright bolt and fixed in repairs complete all as specified and directed.

Supply and fixing MS pressed handles, oval type, stove enameled black 125mm size complete all as specified and directed.

Supply and fixing MS pressed handles, oval type, stove enameled black 125mm size fixed in repairs complete all as specified and directed.

Supply and fixing in repair mild steel handle left or right side for window duly painted with black Japan paint complete all as specified and directed.

Supply and fixing mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame complete all as specified and directed.

Supply and fixing mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame fixed in repairs complete all as specified and directed.

Supply and fixing 150mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

Supply and fixing in repairs 150mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

Supply and fixing floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 150mm complete all as specified.

Supply and fixing in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 150mm complete all as specified.

Supply and fixing 100mm size hasp and staple, mild steel, wire type, stove enameled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fixing in repairs 100mm size hasp and staple, mild steel, wire type, stove enameled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fixing extruded aluminium alloy handles, fabricated type, anodised, 100mm size complete all as specified and directed.

Supply and fixing in repairs extruded aluminium alloy handles, fabricated type, anodised, 100mm size complete all as specified and directed.

Material and labour for petty repairs to existing steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after making it serviceable complete all as specified and directed.

Material and labour for petty repairs to PVC door shutter by making minor adjustment to hinges etc easing of shutter including taking down of shutter if required complete all as specified and directed.

Tightening the loose wooden pelmet boxes made out of plywood/ block board with two new 2nd class hard wood plugs (gutties) of size 30mm x 40mm long embedded in cement mortar (1:3) and providing two No. new side MS clips and fixed with MS screws complete, the length of pelmet n. exc. 1.5 m complete all as specified.

Petty repairs to cupboard (kitchen) including easing of cupboard shutters including taking down and re-fixing in position of shutters drawers tightening of piano type hinges fixing of handles etc with drawers adjustment of ball catches etc (one unit shall comprises one cupboard irrespective in numbers of shutters and drawers) complete all as specified.

All as per ser item No. 84.00 above but cupboard (bedroom) excluding drawers complete all as specified.

Supply and fixing in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed

Supply and fixing in repairs drapery rod 20mm dia, decorative type and fixed complete all as specified and directed

Supply and fixing in repairs end stopper, decorative type and fixing brackets for the drapery rod 20mm dia (one set comprises of 2 No of decorative type end stopper 2 No of fixing brackets) complete all as specified and directed

Material and labour for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including taking down old unserviceable steel window complete all as specified and directed

All as per srl item No. 89.00 above but without glazing bars

Material and labour for steel ventilator with top hung shutter including hinges, steel peg stay including taking down old unserviceable steel window complete all as specified and directed

Supply and fixing mild steel framed work for such as guard bars/ grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E 165 including one shop coat of zinc chromate primer complete all as specified and directed.

Material and labour for hacking out old broken glass (any thickness, size, quality or description) from wooden/ metal frames glazed with putty or fixed with beads complete all as specified and directed.

Material and labour for 4mm thick sheet glass ordinary quality and glazing with oil putty in squares exc. 0.50 Sqm in each pane complete all as specified and directed.

Material and labour for 4mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stamples and fixed complete all as specified and directed

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stamples and fixed including taking down old unserviceable wire cloth complete all as specified and directed

Supply and fixing in repairs 18/ 19mm thick MDF board, exterior grade, prelaminated on both side with decorative choice lamination, fixed with screws to timber frame work, including 18/19mm wide, 6mm thick 2nd Class HW lipping on edges complete all as specified and directed

Supply and fixing mild steel rollers and plate suitble for sliding drawers complete all as specified and directed

Supply and fixing continuous (piano) hinges 30mm width of flaps, mild steel, bright finish or electro galvanized with cupboard or drawers complete all as specified and directed

Supply and fixing aluminium mortice lock, vertical type size 65mm 4 lever brass body complete all as specified and directed.

Supply and fixing ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed

Supply and fixing 75mm brass handles, cast type, polished bright fixed with brass screw complete all as specified and directed

Supply and fixing 2nd class hard wood plain fillets. Square or rectangular or triangular in section and bull-nosed, splayed, chamfered or rounded on one edge or face, clean sawn, planed on both sides secured with nails or beads , sectional area exc 3 Sqcm and not exc 6 Sqcm, including two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Supply and fixing 40mm wide 3 to 6mm thick tapered rubber beading fixed to door shutter with nails as in repair complete all as specified

supply & laying steel water tubing 15mm bore (dia) galvanised, medium grade with all fitting, fixed on walls, ceiling or laid in floors or any other situation including taking up or down old unserviceable pipe, complete all as specified and as directed.

supply & laying steel water tubing 20mm bore (dia) galvanised, medium grade with all fitting, fixed on walls, ceiling or laid in floors or any other situation including taking up or down old unserviceable pipe, complete all as specified and as directed.

Supply and fixing in repair long nose, fancy type bib tap cast copper alloy chromium plated suitable for 15mm bore iron pipe with long body fancy type complete all as specified and directed.

S&F in repair 2 way bib cock (foam Flow) with flange for suitable for fixing to 15mm bore (dia0 GI pipe, complete all as specified and as directed.

Supply and fixing in repairs single lever basin mixer with popup waste with 450mm long braided hoses suitable for fixing to 15mm bore GI pipe complete all as specified and directed

Supply and fixing in repair pillar tap, cast copper alloy chromium plated, with capstan heads, 15mm bore dia of pipe screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

Supply and fixing in repair 15mm angle/ stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butterfly handle screwed at two right angles ends for both iron pipe complete all as specified and directed.

Supply and fixing in repairs angular stop cock with wall flange suitable for fixing to 15mm bore GI pipe complete all as specified and directed

Supply and fixing in repairs 2 way angular stop cock with wall flange suitable for fixing to 15mm bore GI pipe complete all as specified and directed

Supply and fixing in repairs wall mixer 3-in-1 with provision for both over head shower and hand shower complete with 115mm long bend pipe, connecting legs & wall flange suitable for fixing to 15mm bore GI pipe complete all as specified and directed

Supply and fixing in repairs sink cock with swivel casted spout (wall mounted) suitable for fixing to 15mm bore GI pipe complete all as specified and directed

Supply and fixing in repairs overhead shower 105mm dia single flow suitable for fixing to 15mm bore GI pipe complete all as specified and directed

Supply and fixing hand shower 105mm round shape multi flow with air effect (ABS body & face plate chrome plated) with rubit cleaning system suitable for fixing to 15mm bore GI pipe complete all as specified and directed

Supply and fixing in repair brass chromium plated shower rose of 125mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed.

Supply and fixing brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges fixed in repairs complete all as specified and directed.

Supply and fixing Chromium plated health faucet for EWC with 1m long chromium plated tube with wall hook superior quality suitable for 15mm dia for iron pipe or for brass ferrule complete all as specified.

Supply and fixing in repairs CP jet spray with holder for EWC 1.5m long complete all as specified and directed

Supply and fixing PVC connection 15mm bore size with PTMT nuts of length 450mm fixed in repair complete all as specified and directed.

Supply and fixing in repairs new flexible PVC waste pipe of approved quality 32mm bore, 75cm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed

Supply and fixing coloured PVC bathroom cabinet of size 450mm x 450mm x 90mm with mirror (as approved) fixing with chromium pated brass screws and wooden/ plastic cleats fixed in repairs complete all as specified and directed.

Supply and fixing sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guards and railing 60cm long fixed in repair complete all as specified and directed.

Supply and fixing in repair glass corner shelf assembly, consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing 60cm long complete all as specified and directed

Supply and fixing soap dish of size 125mm stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified and directed.

Supply and fixing vitreous china white wash down water closet pan (Pedestal Pattern) with trap and fixing bolts (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc. and making good to floor/ disturbed surfaces including dismantling the existing unserviceable water closet complete all as specified and directed

Supply and fixing vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including CI 'P' or 'S' trap with providing lime concrete bedding and connecting to flushing cistern complete including breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor fixed in repairs complete all as specified.

Supply and fixing in repair white plastic water closet seat cover for water closet pan (Pedestal Pattern), closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fixing PVC white low level flushing cistern 10 litre capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, PVC short bend etc. fixed on existing brackets fixed in repairs complete all as specified and directed.

Supply and fixing vitreous china wash hand basin of size 550 x 400mm (flat back or angle back type) with pedestal including 32mm bore brass chromium plated waster fitting, a pair of cast iron bracket duly painted/ erecting stand including cutting and pinning in ends of making good disturbed surfaces in cement mortar (1:3) including dismantling the existing unserviceable wash basin complete all as specified and directed

Supply and fixing in repair sink made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm (minimum) including PVC waste pipe complete all as specified and directed.

Supply and fixing in repair sink made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm (minimum) including PVC waste pipe complete all as specified and directed.

Supply and fixing in repair stainless steel kitchen rack of size 750 x 800 x 200mm (thickness of sheet not less than 0.63mm) with mild steel brackets and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed

Supply and fixing mild steel chromium plated grating 125mm dia circular shaped and fixing with cement mortar (1:3) on Nahani trap or floor trap complete all as specified and directed.

Supply and fixing in repair 32mm dia PVC waste coupling for WHB or sink (half or full threaded) complete all as specified.

Supply and fixing of peg set of 5 of PTMT fixed to rear side of door shutter in bath complete all as specified and directed.

Disconnecting of water tanks any type of capacity exc 250 ltrs and n.exc 500 ltrs capacity setting aside for repairs cleaning and removing all scale and dirt etc from tank and mouths of circular pipes & re-fixing in position complete all as specified and directed

Disconnecting of water tanks any type of capacity exc 500 ltrs and n.exc 1000 ltrs capacity setting aside for repairs cleaning and removing all scale and dirt etc from tank and mouths of circular pipes & re-fixing in position complete all as specified and directed

Cleaning of over head tank RCC/ PVC of any description and capacity exc. 250 litres but n.exc 500 litres, de-scaling, washing complete with soap solution and removing vegetation around the over head tank/ plate form including opening and reconnecting with GI tubing as site requirement complete all as specified.

Cleaning of over head tank RCC/ PVC of any description and capacity exc. 500 litres but n.exc 1000 litres, de-scaling, washing complete with soap solution and removing vegetation around the over head tank/ plate form including opening and reconnecting with GI tubing as site requirement complete all as specified.

Demolition of RCC water tank of any description and remove the debris from the roof and disposed it out of defence land complete all as specified and directed

Supply and fixing rotational moulded polyethylene water storage tanks, 500 litres capacity, (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, fixed in repairs all as specified and directed.

Supply and fixing rotational moulded polyethylene water storage tanks, 1000 litres capacity, (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, fixed in repairs all as specified and directed.

Supply and fixing 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed.

Supply and fixing in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed.

Supply and fixing 20mm gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed in repairs complete all as specified

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc., complete all as specified.

Supply and fixing PVC (SWR) rain water pipes single socketed in any length with rubber ring joints laid in floors 110 mm bore complete all as specified and directed.

Supply and fixing PVC (SWR) rain water pipes single socketed in any length with rubber ring joints laid in floors 75 mm bore complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 110mm bore all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 75mm bore all as specified and directed.

Supply and fixing 110mm bore PVC (SWR) branches piece, double (double Y) equal or unequal with rubber rings joints fixed to walls complete all as specified and directed

Supply and fixing 75mm bore PVC (SWR) branches piece, double (double Y) equal or unequal with rubber rings joints fixed to walls complete all as specified and directed

Supply and fixing PVC (SWR) vent cowl 75mm bore all as specified and directed.

Material and labour for 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement fixed complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified.

Material and labour for 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection, laid in panels including finishing the concrete surface even & smooth without using extra cement complete all as specified and directed.

Material and labour for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundation filling, post holes, mass concrete, surface channels, drains and other similar works complete all as specified and directed.

Material and labour for grubbing up bushes or trees trunk of girth n. exc. 10cm including cutting of tree/bushes grown in/over walls, digging out roots and making good the disturbed portion of wall with PCC (1:3:6) type C-1 using 20mm graded stone aggregate including matching the same complete all as specified and directed.

Material and labour for grubbing up bushes or trees trunk of girth n. exc. 10cm including cutting of tree/bushes grown in/over roof, digging out roots and making good the disturbed portion of roof tiles n. exc. 1 sqm with tiles including matching the same complete all as specified and directed.

Cleaning of roof removing bushes, mud, debris, digging out roots and making good the disturbed portion of roof tiles with tiles including matching the same complete all as specified and directed

Cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting n. exc. 10cm girth complete all as specified

Material and labour for cutting openings, through brick walls built in cement or lime mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hardcore etc to store and rubbish n.exc 50m complete all as specified and directed.

Material and labour for painting of existing ceiling fans of any make and size complete including taking down and refixing at existing place with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust and greasing including checking replacement of accessories complete all as specified and directed. Note : Accessories to be replaced shall be measured and paid separately.

Taking down exhaust fans of any sweep and make overhauling greasing painting with two coats of synthetic enamel paint and refixing the same at its original place complete all as specified and directed.

Supply and fixing in repairs PVC insulated sheathed wire flexible with stranded copper conductor of size 0.75 sqmm nominal area 3 core ISI marked complete all as specified and directed.

Supply and fixing in repair fan condenser 2.5 MFD including taking down existing complete all as specified and directed

Taking down carefully copper/aluminium point wiring (light/fan/socket or power) fitting and fixtures such as switch, socket, call bell, lamp holder, regulator, sketch fitting etc and making good disturbed surfaces of wall, floors, etc complete all as specified and directed.

Material and labour for point wiring with 1.5 Sqmm, PVC insulated unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit fire proof ISI marked 20mm dia or higher complete with all conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel terminal switch box 1.6mm thick with 3 mm thick plastic laminated sheet top cover, brass screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated FRLS cable green in color as continuous earth conductor connected to common earth and earth dolly with all accessories for one light point controlled by one switch SP one way complete all as specified and directed

All as per srl item No 173.00 here in before but One fan point controlled by one switch and regulator

All as per srl item No 173.00 here in before one socket outlet 5 Amp controlled by one switch on independent board.

All as per srl item No 173.00 here in before one socket outlet point 5 Amp on same board controlled with other switch.

All as per srl item No 173.00 here in before one bell buzzer point controlled by one bell buzzer point

All as per srl item No. 173.00 here in before but with 2.5 Sqmm (nominal area) PVC stranded copper conductor cable 3 pin 15 Amp socket outlet with 2.5 Sqmm PVC insulated with stranded copper conductor cable for continuous earth continuity conductor independent board complete all as specified and directed.

Supply and fixing bell push SP 5 Amps 240 volts complete all as specified.

Supply and fixing call bell ding dong AC single phase, 230 volts including wooden/PVC board of suitable size, connecting & testing complete all as specified.

Supply and fixing switch piano flush type, 5 Amps, 240 Volt AC single pole, one way complete all as specified.

Supply and fixing switch piano flush type, 15 Amps, 240 Volt AC single pole, one way complete all as specified.

Supply and fixing socket out let 5 Amp, 5 pin flush type complete all as specified.

Supply and fixing socket out let 3 pin, 6 pin 15 Amp, flush type complete all as specified.

Supply and fixing batten holder ISI marked insulated body complete all as specified.

Supply and fixing ceiling rose surface type bakelite 65 x 50mm three terminal complete all as specified.

Supply and fixing step fan regulator electronic type 300 watt single phase, including connecting complete after dismantling/ removing unserviceable regulator complete all as specified and directed.

Material and labour for Sub main wiring with PVC insulated cable copper conductor FRLS two single core 4 Sqmm drawn through PVC rigid non metallic conduit including earth continuity FRLS copper conductor 2.5 Sqmm PVC insulated with green insulation complete all as specified. Note : Two runs of single core 4 sqmm and one run of 2.5 sqmm PVC insulated stranded copper conductor through PVC rigid concealed conduit of size 25mm shall be measured as one RM.

Supply and fixing in repair in replacement copper wire PVC insulated 1.5 sqmm single core stranded complete including taking down existing wire all as specified and directed

All as per Srl item No. 189.00 here-in-before but 2.5 sqmm

All as per Srl item No. 189.00 here-in-before but 4 sqmm

Supply and fixing in repair energy saving tube light luminaries with diffuser LED with comprising with CRCA MS box and 4 feet 18 to 20 watt (min) retro fit tube rod having thermally conductive material Lumen output 2100 lumens (min) 6500 K, power factor more than 0.95,IP-20 class-I protection with inbuilt LED driver, surge protection up to 2 KV, operative on 140 volts to 270 volts AC supply products must be made in India only, complete prewired, connection and testing complete all as specified and directed. Note : (i) Contractor shall be provided 2 years written manufacturer’s warranty for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall be produce LM-79 & LM-80 report of NABL accredited laboratory from manufacturer's.

Material and labour for energy saving & environmental friendly long life versalite pressure di-cast aluminium luminaire with heat resistant glass and suitable optics for uniform distribution of light 25 watt LED for bldg security lights with high efficiently electronic driver, having IP-66 protection, surge protection min 2 KV power factor more than 0.9 complete operative on AC supply 140 volts to 270 volts pre-wired and product should be made in India qty including bracket made out of GI pipe 32mm dia bent to shape and clamps 40 x 6mm with nuts and bolts prewired products must be made in India only connection and testing complete all as specified. Note: (i) Contractor shall be provided 2 years written manufacture's guarantee for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall be produce LM-79 & LM-80 report of NABL accredited laboratory from manufacturer's

Material and labour for City 1 new decorative wall light fixture made up of polycarbonate, suitable for lamp type 1 x 9 watt retrofit LED lamp including 9 watt LED lamp of same make as fitting complete all as specified.

Material and labour for Sheet metal enclosure DBs when MCBs to be used, SPN 8 ways 240 V, with 200 Amps rated bus bar, double door, epoxy coated inside and outside with earth bar and neutral bar, prewired complete all as specified.

Material and labour for Sheet metal enclosure DBs when MCBs to be used, SPN 4 ways 240 V, with 200 Amps rated bus bar, double door, epoxy coated inside and outside with earth bar and neutral bar, prewired complete all as specified.

Material and labour for MCB SP 6 to 10 Amp, 240 volts,10 KA, C-curve complete all as specified.

Material and labour for MCB SPN 6 to 25 Amp, 240 volts,10 KA, C-curve complete all as specified.

Material and labour for painting of existing water heater of capacity 25/35 Ltrs storage type including taking down and refixing at existing place after painting with two coats of synthetic enamel paint by spraying complete all as specified

Supply and fixing inner water tank suitable for electrical water heater storage type of capacity 25 Ltrs, all as per existing type and size including replacement of worn out MS bolt complete all as specified and directed

Supply and fixing in repairs geyser inner assembly made out of brass CP having 9 hole in base with rubber gasket and shellac complete all as specified

Supply and fixing geyser element triangle type 1.5 KW single phase 230 volt complete all as specified.

Supply and fixing thermostat for geyser single phase 230 volt with setting range 0 to 85 degree centigrade complete all as specified.

Supply and fixing PVC connection for geyser of size 15mm x 600mm with two nos brass connectors with washers of size 15mm dia ISI marked complete all as specified.

Supply and fixing LED bulb 5 watt suitable for B-22 base holder 5 star lamp 6500K complete all as specified and directed

Supply and fixing in repair energy saving tube light luminaries with diffuser LED with comprising with CRCA MS box and 2 feet 9 to 12 watt (min) retro fit tube rod having thermally conductive material Lumen output 1000 lumens (min) 6000 K, power factor more than 0.95, IP-20 class-I protection with inbuilt LED driver, surge protection up to 2 KV, operative on 140 volts to 270 volts AC supply products must be made in India only, complete prewired, connection and testing complete all as specified and directed. Note : (i) Contractor shall be provided 2 years written manufacturer’s warranty for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall be produce LM-79 & LM-80 report of NABL accredited laboratory from manufacturer's.

THAPAR CONSTRUCTION COMPANY

Hans raj sons

M/s GURFATEH BUILDERS

NATIONAL BUILDERS

M/S Vinod Kumar