Rewiring of Technical building, Coil hut, Pump house and laying of UG cable for street light at Balasore Navtex Station, Orissa

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

3 Module (100mm * 75mm)

4 Module (125mm * 75mm)

6 Module (200mm * 75mm)

12 Module (200mm * 150mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

6/10 A switch

16/20 A switch

3 pin 6/10A socket outlet

6 pin 16/20 A socket outlet

Supplying and fixing PVC batten/ angle holder on round 5’’ hylam sheet including connections etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box and round 5’’ hylam sheet including connections etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor,

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Up to 450 mm Sweep

Supplying and fixing of following sizes of medium class PVC conduit along with accessories (1,2,3,4-way CI round J/Box, pvc bend, elbow, Tee etc) in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. mm

3 x 2.5 sq. mm

3 x 4 sq. mm

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral busbar, earth bar, din bar, interconnections, powder painted\ including earthing etc. as required. (But without MCB/RCCB/Isolator)

4 way (4 + 12), Double door.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

4 way (4 + 12), Double door.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole 6A/10A/16A(6A - 26 nos, 10A-10nos, 16A-20nos)

Double pole 32A

Supplying and fixing following rating, double pole, 240 V, isolator in the commissioning etc. as required. existing MCB DB complete with connections, testing and Commissioning

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtr. long etc. with charcoal/ coke and salt as required.

Supplying and laying of 25mm X 3.15mm copper strip at 0.50 mtr. Below ground as strip earth electrode, including connection/termination with nut, bolt, spring washer etc. as required.(joint shall be done by overlapping and with 2 sets of brass nut and bolts & spring washer spaced at 50mm)

LED lamp with B-22 base, 15 watt. Make- Reputed

Supply and fixing Indicator 1-Modular-Reputed make.

Indoor Tube Light Battens, with LED Tube ( inclusive), reputed make LED Batten with Essential 4' 20W LED Tube.

Supplying and fixing of Bulk Head Luminaries IP65/66/67 IK09/10 LED Light source (inclusive) with integrated LED source-Reputed make.

Exhaust Fan, 200mm, ventilating air brisk fan. Make- Reputed make.

Exhaust Fan, 450mm sweep, Metallic DBB, Make- Reputed .

Supply and fixing Wall mounting revolving fan. 400 mm sweep. Make- Reputed .

Ceiling Fan, Electro-phonetic lacquered/Electroplated surface for anti-rusting, High speed fan with wider tip blade for effective air circulation with Sweep 1200mm and High performance even at low voltage, Make- Reputed.

UG Cable, 3Core x 2.5 sqmm, PVC Armored, Copper Conductor, HRPVC/ XLPE Insulation, Make- Reputed.

Bare Copper wire, 10 SWG for running earth from TPN&SPN DBs to Meter Box and to earth pit

1.5 sq mm PVC copper cable.(90 mtr roll). Make- Reputed.

Driver for existing LED street light fittings. Power supply 230volt AC to 12 volt DC, 5 Amp.

Lightning Arrester of solid copper Rod of 1-mtr length, 25 mm dia with top ball and 5-nos spicks.

LED Post Top made in cast aluminium spigot housing with decorative opal acrylic diffuser and IP65 protection. Make- Reputed.

Supply and fixing of 3-phase, copper Bus Bar with neutral bar, 415 volt. 50 Amp. Including connection of cables. Make- Reputed.

UG Cable laying and termination by digging trenches 1ft wide x 1ft depth, laying of UG Cable and covering of UG Cables and soil covering of the trenches.(Loop connection of 26 nos. street light to be given)

Labour charges for fixing of lightning arrester at the top of the DNC antenna mast with copper strip.

Labour charges for removal of existing wiring, PVC/Iron conduit pipe, casing-capping, switch board, ceiling fans, tube light frames etc as required

M/s-U. TECH SERVICE

JAGAJJIBAN DASH

M/S MAA TARINI CONSTRUCTION & CO.

MS SUJATA ENTERPRISE

S.P.Enterprise