GE/863/EWS-T-08 OF 2024-25

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level) complete all as specified and directed.

M&L 25mm thick cement concrete type B-O, 1:2:4 (12.5mm graded agg ) as in sub base of flooring complete all as specified and directed.

M&L hard core of broken stone of gauge n.exc 63mm, deposited spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surfaces complete all as specified and directed.

M&L for Non-skid ceramic tiles, coloured, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer of cement mortar 1:4 complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggrgate as in coping of wall complete all as specifed and as directed.

M&L for 75mm thick cement concrete (1:3:6) type C1 (using 20 mm well graded stone aggregate) as in plinth protection, finishing cement concrete surfaces fair and even without using extra cement, laid in alternate panels, including forming joints at 2 mtr intervals and filled with bitumen mastics, complete all as specified and directed.

Taking down shutter of any description exc 1sqm but n exc 2 sqm each complete all as specified and directed.

M & L for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 300mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F 125mm aluminium handles, cast type ,anodised and pattern/design as approved complete all as specified and directed.

S & F butt hinges, 100mm medium weight, cold rolled mild steel complete all as specified and directed.

Dismantling false ceiling boards any description and in any position incl frame work complete all as specified and directed.

S&F anodised aluminium snap grade of size 600 X 600mm frame work for false ceiling alongwith hangers 6mm dia G I (upto 1200mm length) asjusting level fixed to roof slabs by means of ceiling cleats made out of G I flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.

S&F Exposed metal frame ceiling with 8mm thick calcium silicate board of silicious and calcareous material reinforced with cellulose fibre for fixing in 600mmX600mm grid (frame work for ceiling shall be measured and paid seprately) complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness from roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed.

S & F Steel work in tubular trusses, vertical posts , purlins etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specififed and dircted by Engr-in-Charge.

M&L for two coats synthetic enamelled paint over one coat of red oxide primer incl preparation of new surface of steel of any description over 10cm width or girth complete all as specifed and as directed by Engr-in-Charge.

Demolition of stone/boulder/precast concrete block walling masonary, built in cement mortar or cement lime mortar incl all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.

M&L 1:3:6 type C-1 precast cement concrete (20mm graded stone aggregate) block masonary with solid blocks exc 10 cm in width and not exc 20cm in width and setting in cement mortar 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L 15mm thick rendering on brick work or concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement complete all as specified and directed.

M&L two coats cement base paint over a coat of chalk whiting on plastered surface including preparation of newly plastered surfaces, complete all as specified and directed.

S&F 2000 Ltrs capacity, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Part – I, including 20mm ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20 mm bore steel tube and dismantling existing water tank and removing complete all in repair after dismantling old one complete all as specified and directed.

Taking up or down steel tubing 15 mm bore, and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed.

S & F 15 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor complete all as specified and directed.

Fixing only 15 mm bore water tubes, any grade, to walls and ceilings or laying in floors using pipe retrieved from Srl Item No. 28 complete all as specified and directed.

Taking up or down steel tubing 20 mm bore, and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed.

S & F 20 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor, complete all as specified and directed.

Fixing only 20 mm water tubes, any grade, to walls and ceilings or laying in floors in using pipe retrieved from Srl Item No. 31 complete all as specified and directed.

S&F in repair Bib taps, cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore steel tube fixed in repair complete all as specified and directed.

S&F in repairs 15mm bore stop valve/angle valve cast copper alloy chromium plated fancy type screwed down, high pressure, with crutch or butter fly handles fixed complete all as specified and directed.

S&F in repair PVC valve less syphonic action type low level flushing cistern white of capacity 10 Ltrs with inlet valve float and fixed to water closet with PVC flushing pipe 32mm dia complete all as specified and directed.

S&F in repair Vitreous china squatting pan 'Orissa pattern' size 580X 440 mm white with integral foot rest (exluding flushing cistern and flush pipe) including connection to trap,concrete and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor fixed complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white, including flush pipe of polyethylene of low or high density or PVC 32 mm dia., plastic water closet seat closed pattern with cover and hinging device and trap with connection complete all as specified and directed.

S&F in repair Chromium plated jet for EWC complete all as specified and directed.

Supply & fixing in repairs vitreous china wash basin, white, flat back of size 550mm x 400mm including 32mm dia PVC flush pipe with coupling and set of brackets including 15mm bore pillar tap fancy type cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule incl PVC connections 15mm size with PTMT nuts of legth 450mm complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous China Urinal, half stall type, white with 32mm bore PVC waste pipe of length 900mm to 1200mm and including urinal spreader of PTMT any colour for fixing with 15mm dia pipe including connection to flushing pipe and outgoing pipes with 32mm bore PVC waste pipe of length 900mm to 1200mm complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size for iron pipe or for unions and fixed to 15 mm bore steel tube complete all as specified and directed.

S&F in repair CP tubular towel rail, 20 mm dia. 60 cm long between flanges complete all as specified and directed.

S&F Soap dish, cast copper alloy, chromium plated with screws in repairs complete all as specified and directed.

S&F in repair 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors after dismantling old one complete all as specified and directed.

S&F in repairs 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors after dismantling old one complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S& F for 110mm PVC (SWR) bends complete all as specified and directed.

S& F for 110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S& F 110mm PVC (SWR) vent cowl complete all as specified and directed.

S& F 75mm /110mm PVC (SWR) reducer complete all as specified and directed.

M&L for washing rubbing down and applying of two coat cement base paint to old surfaces of walls complete all as specified and directed.

M&L one coats of synthetic enamal paint to steel surfaces of any discription not otherwise described over 10cm width or girth preparation of old surfaces, complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of OBD over 1mm thick wall putty complete all as specified and directed

M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as spd and directed.

Supply and fix in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

M&L for preparing old painted surfaces of wood or wood based materials of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as spd and directed.

M&L for 75 mm thick P.C.C 1:4:8 type B-2 using 40mm graded stone agg as in sub base of floor complete all as specified and as directed.

M&L chequered cement concrete tiles 20cmx 20cmx 25mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 20mm thick screed in cement mortar 1:4 complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide or n.exc 1.5 mtr in depth for pipe line, drains, foundations of sewarage lines or manholes and like and getting out in soft/loose soil, complete all as specified and directed.

M&L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L 15mm thick rendering on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement (with water proofing compound), complete all as specified and directed.

M&L three coats of white wash on plastered surface including preparation of newly plastered surfaces, complete all as specified and directed.

Supply only integral water proofing compound of approved make, complete all as specified and directed.

Returning, filling in, spreading, leveling watering and well ramming in layers n,exc 25 cm thick in soft/loose soil, complete all as specified and directed.

Removing excavated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above starting point, complete all as specified and directed.

M&L cement concrete 1:4:8 type D-2 using 40mm graded stone agg as in bed to drain pipe, incl packing under and haunching against the sides of pipe 150mm bore after they are laid and tested complete all as specified and directed.

Demolition and breaking up drain pipes (salt, glazed ware, AC or reinforced concrete) (200mm internal dia) of any description set in cement mortar, complete all as specified and directed.

M&L 150mm internal dia reinforced concerete pipes, class NP2, laid and jointed complete with collars and jointed as specified, complete all as specified and directed.

Demolition of RCC work of any description and any position, complete all as specified and directed.

M&L for precast RCC 1:2:4 type B-1 using 20mm graded stone agg as in cover slab and like axcept set in cement mortor 1:4 complete incl necessary form work complete all as specified and directed.

M&L mild steel TMT bars 6-8mm dia bar cut to length, bent to shape required including cranking, bending spirally for hoping for fencing posts and binding with mild steel wire ( annealed) not less than 0.9 mm dia complete all as specified and directed.

Pumping out/dewatering of soakage wells septic tanks etc of any size and depth by machanical means i.e. pumping sets etc and removing the muddy water in liquid or semi-liquid state to a pit of sufficient size and depth at a place exc. 250mtrs away from defence land and burried in ground including necesary excavation earth work and spreading of bleaching powder complete all as specified and directed.

Desilting/desludging the septic tanks/ soakage wells/manholes of any size and any depth etc by manual labour or mechanical means and removing the sludge in liquid or semi-liquid state out side defence land complete all as specified and directed.

M&L for walling of random rubble stone masonry uncourced, well bonded, bedded and solidly hearted built in CM 1:4, complete all as specified and as directed.

All as per item No. 77 above but except stone complete all as specified and directed.

M&L for precast PCC 1:3:6 type C1 (20mm graded agg) as in bond stones set in cement mortar 1:6 complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid,bedded & pointed in any mortar complete all as specified and directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer of cement mortar 1:4 complete all as specified and directed.

M&L for Non-skid ceramic tiles, coloured, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer of cement mortar 1:4 complete all as specified and directed.

M&L for Machine cut kota stone slab flooring (595x595mm) 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 20mm thick cement screed bed in CM(1:4) including rubbing and polishing complete all as specified & directed.

M&L 100mm thick PCC 1:2:4 Type B1 using 20mm crushed stone aggregate as in flooring finished even and smooth without using extra cement laid in alternate bays incl applying a coat of white wash to the sides complete all as specified and directed.

Taking down chowkats or frames(without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4.0 Sqm each, complete all as specified and directed.

Taking down shutter of any description exc 2 sqm each complete all as specified and directed.

S&F Anodised aluminium frame of doors, windows & ventilators with one or more rebates including joining cleat for fixing etc.,complete all as specified and directed.

S&F Anodiesed aluminium door shutters, aluminium section weighing 0.55 Kg/m incl. necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos(150mm) in each doors, hinges, anodiesed aluminium snap beading screw etc., complete all as specified and directed.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle 100mm (1 no.) complete all as specified and directed.

S&F 100mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

Hacking out old broken glass (any thickness) , size, quality or description ) from metal frame including punching or drilling out old glazing pins complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares n,exc 0.5 Sqm, each pane complete all as specified and directed.

S & F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F Mild steel work as in Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates(Fe-410-W(Gde E-250)Quality-A) complete all as specified and directed.

S&F in repairs 19/20 mm dia curtain rails mild steel chromium plated with fixing brackets, stops, roller etc, complete all as specified and directed.

M & L for preparation of old plastered surfaces of wall including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coat of cement based paint complete all as specified and directed.

S & F in repair aluminium hat pegs, solid body, 125mm to 175 mm complete all as specified and directed.

S& F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl 40mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm-45gms/40mm-60 gms)& PVC waste pipe complete all as specified and directed.

M&L for PCC 1:2:4 B1, 20mm graded stone aggregate as in surface channels and drains complete all as specified and directed

Extra forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, mould, mitred/stopped ends etc. complete all as specified and directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M & L for point wiring using approved colour coding as per IS by using FRLS PVC insulated 1.5 Sqmm multistranded,1100 volt grade copper conductor cable unsheathed type, for phase, neutral and earth incl PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of 2 mm thick sheet metal terminal box with 3 mm thick hylum laminated sheet on top for fixing switches sockets etc. for one light/fan (ceiling & exhaust) point controlled by one switch complete all as specified and directed.

All as per item No 104 here-in-before but for one 3 pin socket outlet 5 Amps on the same board with other switches with cable of size 1.5 sqmm, complete all as specified and directed.

All as per item No 104 here-in-before but for 3 pin socket outlet 5 Amps on independent board with cable 1.5 Sqmm size, complete all as specified and directed.

All as per item No 104 here-in-before but for one 3 pin socket outlet 15 Amps on independent board with copper cables of 2.5sqmm size, complete all as specified and directed.

Supply and fix of switch piano, flush type single pole, one way, 5 Amps, 240 volts complete all as specified and directed

Supply and fix of socket outlet, 3 pin 5 Amps complete all as specified and directed

Supply and fix of switch piano, flush type single pole, one way, 15 Amps, 240 volts complete all as specified and directed

Supply and fix of socket outlet, 3 pin 15 Amps complete all as specified and directed

S & F of stepped type electronic fan regulator flush type, complete all as specified and directed

S & F of Lamp holder, PVC/Polycarbonate type with back plate complete all as specified and directed

Supply and fixing of LED lamp 12 Watt having rechargeable type battery and min four hours backup complete all as specified and directed.

Supply and fix of Ceiling Rose, 3 phase polycarbonate isolated body including junction round pvc cover plate with brass screw/nuts, complete all as specified & directed.

M & L in replacement of submain wiring with PVC FRLS insulated single core multistranded copper conductor cable 1100 Volts grade 6 Sqmm wire, 3 runs (Phase, Neutral & Earth) all drawn through & incl PVC casing and capping of suitable size medium grade complete all as specified and directed.

M & L in replacement of earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly in ground (earth pit not less than 2.25metres deep below normal ground level) with top edge of the plate not less than 1.5meter below normal ground level ,connected to and including using galvanized iron wire of 4.0 mm thick as earthling lead by means of bolts nuts, cheek nuts and washers of galvanized iron or steel .earth plate surrounded by alternate layers packed with char coal dust and common salt ,15cm thick and 15cm wide all around bottom and top and watering pipe 20mm bore of GI light grade with funnel, wire mesh and 40mm dia GI protection pipe medium grade all as shown in electrical plate no-3 of SSR part-I and connected to earthling test point, and including testing on completion all as specified location and as directed by Engineer-in -charge. Note: Suitable quantity of charcoal, common salt, funnel, GI pipe required for watering, pit & CI pit cover etc is deemed to be included in quoted rate and lead wire used beyond 7.5m from pit cover will be measured separately.

S & F in replacement of sheet metal enclosure double door for DBs single pole and neutral for 8 way 240 volt with 200 amps rated bus bar complete with bus and neutral link complete all as per specified and directed.

S & F in repalcement of MCB SPN 40 Amps ,10 KA 230 Volts ,50 HZ complete all as specified and as directed

S & F in repalcement of MCB SP 6-32 Amps ,10 KA 230 Volts ,50 HZ complete all as specified and as directed

S & F LED light fitting 20W, 220 volt AC, having colour temperature daylight (6500K), Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

All as per item No 121 here-in-before but 10 watt (2ft), complete all as specified and directed.

S & F of LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver, connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

Schedule of Credit

chankaya solutions (BID ID -3079347)

M/S SHIV NATH ENTERPRISES (BID ID -3077780)

m/s jupiter builders (BID ID -3083186)

PRITPAL SINGH (BID ID -3081752)

R B TRADERS (BID ID -3078951)

M/S J.S.ENTERPRISES (BID ID -3060987)

NIRMAL SINGH BHOGAL AND SON (BID ID -3061025)