Budgetary Quotations for Upgradation of JNPA Environmental Laboratory at Business Facilitation Centre in JN Port

Amount

Providing and fixing of fire retardant aluminum partition of partly glazed of 12mm Toughened Clear Glass with polished edges and partly PVC Fire-Retardant Panels (25mm thick, multi-wall) with Standard Aluminum- Framed Glass Doors with Handle and Fingerprint Lock Biometric Doors (Glass + Frame) with Hinges, Handles, Locksets including transportation and all necessary fitting and fixtures etc. completed.

Providing and fixing of Modular Base Cabinets of size 900 mm W x 600 mm D x 900 mm H with laminate finish of Material: 18 mm BWP-grade marine plywood or GI powder-coated sheet and Finish with Chemical-resistant epoxy powder coating (inside-out) with Back Panel Vented / Closed option and levelling legs and Hinges of SS 304 Soft-close with Handles: SS brushed finish with 3-drawer stack (top stationery, middle utility, bottom large) including transportation and all necessary fitting and fixtures etc. complete.

Providing and Installation and commissioning of 3-Ton Central HVAC System (VRV/VRF) with Fresh Air Inlet + HEPA Filtration + Exhaust Mode with Copper Refrigerant Pipe (insulated, 0.8mm) and Drain Pipe (25 mm PVC with slope tray) with Electrical Cabling (Fire retardant wire with ISI switches & MCB) and GI/ Aluminum Ducting (with acoustic lining for HVAC unit) with Duct & Unit Insulation (Nitrile rubber 9-13mm) and Wall-Mounted Stabilizers (5 KVA) including transportation and all necessary fitting and fixtures etc. complete.

Providing and Installation and commissioning of 2-Ton Inverter Split AC (5-star, copper coil) for individual chambers with Copper Refrigerant Pipe (insulated, 0.8mm) and Drain Pipe (25 mm PVC with slope tray) with Electrical Cabling (Fire retardant wire with ISI switches & MCB) and GI/ Aluminum Ducting (with acoustic lining for HVAC unit) with Duct & Unit Insulation (Nitrile rubber 9-13mm) and Wall-Mounted Stabilizers (5 KVA) including transportation and all necessary fitting and fixtures etc. complete.

Providing and Installation of MS Powder- Coated Canopy Chamber (3m × 1.5m × 2.1m ht), with 2 sliding doors and ventilation louvers with Epoxy-coated interior for corrosion resistance including transportation and all necessary fitting and fixtures etc. complete.

Providing and fixing of Flameproof Exhaust Fan (300mm, 1400 RPM) with ducting & louver damper with ISI flameproof certified (Crompton/ Almonard) including transportation and all necessary fitting and fixtures etc. complete.

Providing and fixing of SS-304 Gas Manifold (3- point, 2 bank) with non-return valves & change- over including transportation and all necessary fitting and fixtures etc. complete.

Providing and fixing of High Purity Double Stage Regulator (Brass/SS) for N₂, H₂, Zero Air including transportation and all necessary fitting and fixtures etc. complete.

Providing and fixing of Copper Tubing ¼ inch (Annealed, seamless, ASTM B280) with Ferrule Fittings including transportation and all necessary fitting and fixtures etc. complete.

Providing and fixing of Brass Needle Valves with Pressure Gauge (0–15 kg/cm²) including transportation and all necessary fitting and fixtures etc. complete.

Providing and fixing of Gas Leak Detection System (Multi-gas, audio-visual alarm) including transportation and all necessary fitting and fixtures etc. complete.

Providing and fixing of Cylinder Restraining Chains + SS Stand including transportation and all necessary fitting and fixtures etc. complete.

Providing and fixing of Earthing for Canopy & Gas System (6 SWG copper wire + pit) including transportation and all necessary fitting and fixtures etc. complete.

Providing and fixing of Flameproof Light Fittings with switchgear including transportation and all necessary fitting and fixtures etc. complete.

Providing, Installation & Testing – Gas Tightness, Pressure Drop, Purging including transportation and all necessary fitting and fixtures etc. complete.

A. WALLS, CEILING & FLOORING

Providing and Fixing of Modular Cleanroom Partition Panels – PU coated, GI panels, 50mm thick including transportation and all necessary fitting and fixtures etc. complete.

Providing and Fixing of False Ceiling – Aluminum powder-coated grid with PU coated tiles including transportation and all necessary fitting and fixtures etc. complete.

Providing and Fixing of Epoxy Flooring (3-layer, anti-microbial, anti-skid) including transportation and all necessary fitting and fixtures etc. complete.

B. HVAC & ENVIRONMENTAL CONTROL

Providing and Fixing of Cleanroom HVAC System with HEPA Filters (0.3 μm, 99.97%) including transportation and all necessary fitting and fixtures etc. complete.

Providing and Fixing of Dehumidifier (capacity 30-50 L/day) including transportation and all necessary fitting and fixtures etc. complete.

Providing and Fixing of Air Shower Entry System (Two-Way) including transportation and all necessary fitting and fixtures etc. complete.

C. ELECTRICAL & LIGHTING

Providing and Fixing of Cleanroom LED Lights (IP65, dust-proof) including transportation and all necessary fitting and fixtures etc. complete.

Providing and Fixing of Modular Electrical Panels & Switches (FRP Enclosures) including transportation and all necessary fitting and fixtures etc. complete.

Providing and Fixing of UPS Backup (2-3 kVA per chamber) including transportation and all necessary fitting and fixtures etc. complete.

D. MICROBIOLOGICAL WORK MODULES

Providing and Fixing of Laminar Air Flow Cabinet (Vertical Class 100) including transportation and all necessary fitting and fixtures etc. complete.

Providing and Fixing of Biosafety Cabinet Class II A2 (ISO 14644-1) including transportation and all necessary fitting and fixtures etc. complete.

Providing and Fixing of UV Germicidal Lamps (254 nm) including transportation and all necessary fitting and fixtures etc. complete.

E. LAB FURNITURE (CLEANROOM GRADE)

Providing and Fixing of SS304 Workbenches with Splash Guard including transportation and all necessary fitting and fixtures etc. complete.

Providing and Fixing of PP Sink with SS Tap, Lab-grade plumbing including transportation and all necessary fitting and fixtures etc. complete.

Providing and Fixing of Instrument Table (Anti- vibration for microscope use) including transportation and all necessary fitting and fixtures etc. complete.

Providing and Fixing of Storage Cabinets (SS or powder-coated metal) including transportation and all necessary fitting and fixtures etc. complete.

F. SAFETY & ACCESS CONTROL

Providing and Fixing of Fingertip/Biometric Access Entry Locks (IP-rated) including transportation and all necessary fitting and fixtures etc. complete.

Providing and Fixing of Fire Extinguisher (CO₂/ABC Type, IAS Marked) including transportation and all necessary fitting and fixtures etc. complete.

Providing and Fixing of Hand Sanitizer Dispenser (Sensor-based) including transportation and all necessary fitting and fixtures etc. complete.

Providing and Fixing of Pest Control Measures (gel trap, fumigation vent ports) including transportation and all necessary fitting and fixtures etc. complete.

Providing and fixing of Conference Room Table (3600 mm x 1500 mm x 750 mm, PU Finish, 8- seater) including transportation and all necessary fitting and fixtures etc. complete.

Providing and fixing of Carpet for conference room (Wooden finish, anti-static, hi-density) including transportation and all necessary fitting and fixtures etc. complete.

Providing and installation, testing and Commissioning of CCTV Camera – HD Dome IR Camera with HDR & Night Vision (5MP): IP66-rated, IR range 30m, HDR/WDR, PoE/DC powered, remote view app enabled. Brands: Hikvision, CP Plus, Bosch including transportation and all necessary fitting and fixtures etc. complete.

Providing and installation, testing and Commissioning of Network Video Recorder (NVR), 16-channel, H.265+, 4K HDMI output, motion detection including transportation and all necessary fitting and fixtures etc. complete.

Providing and installation, testing and Commissioning of 4TB Surveillance-grade HDD (WD Purple/Seagate Sky Hawk) for NVR backup including transportation and all necessary fitting and fixtures etc. complete.

Providing and installation, testing and Commissioning of 1000VA UPS with 42AH Battery Backup for CCTV system (2–3 hr backup), Brands: APC, Luminous, Microtek including transportation and all necessary fitting and fixtures etc. complete.

Providing and fixing of SS 316 Eye Washer Small for tap fitting at LAB including transportation and all necessary fitting and fixtures etc. complete.

Providing and fixing of Shower + SS 316 Eye Washer for LAB including transportation and all necessary fitting and fixtures etc. complete.

Providing and fixing of Window Vanish Blinds including transportation and all necessary fitting and fixtures etc. complete.

Providing and fixing of Industrial Exhaust Fan (Crompton/Similar) including transportation and all necessary fitting and fixtures etc. complete.

Providing and fixing of Industrial Air Curtain (SS Body, 3-speed, 1.5 m), Brand: Air tecnics/ Euro air including transportation and all necessary fitting and fixtures etc. complete.

Providing and fixing of Fire-Resistant Coating (Flame Seal™, ASTM E-84, VOC-Free) including transportation and all necessary fitting and fixtures etc. complete.

Providing and fixing of LED Panel Lights 2' X 2' (Polycab/ Syska/Wipro incl. insulation) including transportation and all necessary fitting and fixtures etc. complete.

Providing and fixing of Fire-rated Cabling & Switches for LED Panel (FRLSH insulated) including transportation and all necessary fitting and fixtures etc. complete.

Providing and fixing of SS 316L Trolley (450 x 600 mm), 25x25 mm frame with castors including transportation and all necessary fitting and fixtures etc. complete.

Providing and fixing of Gas Cylinder Shade & Locker – 1m x 6m MS frame with profile sheets including transportation and all necessary fitting and fixtures etc. complete.

Providing and fixing of Copper & SS316L Tubing with Fittings for Lab Gases (6 x 20 mtr) including transportation and all necessary fitting and fixtures etc. complete.

Supply fabrication and installation of ducting in 1 m SS 316 L sheet make JSW, Jindal, Sail, (exhaust at 4th Floor) Square type ducting of size 300mmx300mm SS L angle 40 X 40 X 5mm for ducting support , SS 8mm nut bolts with washers for clamping the ducting with angle support including necessary scaffolding, fitting, fixtures, transportation etc. complete.

Installation & Calibration of ICP-OES instrument installation with AMC etc. complete.

Installation & Calibration of GAS CHROMATOGRAPHY (GC) instrument installation with AMC etc. complete.

Installation & Calibration of ATOMIC ABSORPTION SPECTROSCOPY (AAS) instrument installation with AMC etc. complete.

MULTITECH ENGINEERS (BID ID -3278843)

M/S. BALAJI CONSTRUCTION (BID ID -3279148)