Internal Renovation, External repairs, Painting and Development including PH works of Atomic Energy School No-2 buildings (Package-II) at Anushaktinagar, Mumbai

Amount

GENERAL ABSTRACT

PART - I - CIVIL WORKS

PART - II -PUBLIC HEALTH WORKS

PART - III - DEVELOPMENT AND WATERPROOFING WORK

PART - IV - EXTERNAL REPAIR AND PAINTING

PART - V - CIVIL WORKS

Description of Work / Item(s)

Amount

PART - I - CIVIL WORKS

Providing and laying 230/150mm consolidated thickness dry rubble stone hard core soling of following consolidated thickness in sub base to floor and in plinth protection to required levels and lines with first quality rubble, hand set, well packed including filling the interstices with smaller stone chips, supplying & finishing/ blinding the surfaces with approved blinding quality aggregates including watering, consolidation etc. complete as per Specifications, drawings & as directed by Engineer- in- Charge.

230mm thick

150mm thick

Dismantling carefully the existing RCC kitchen platform/Brick work / stone masonary /PCC along with finishing by chiselling without damaging existing structure including cutting the reinforcement etc. depositing the serviceable material at Departmental store and disposing off debris outside colony etc complete all as directed by the EIC.

Existing Kitchen /Granite/ RCC platform/PCC

Brick work

Stone masonary

Providing and injection chemical emulsion for post construction anti-termite treatment and creating a chemical barrier under all round walls, floors, wooden surfaces, junction of walls & floors, wooden surfaces, junction of walls & floors, beams, columns etc, complete with using chlorophyriphos 50 E C or approved equivalent termiticide emulsion with proportion 1 part chemical and 19 part water or as per the manufacturer's specification and also the injecting chemical formulations should be as per I.S 6313 part III 1971 specification and as approved by the insecticide Regulation Act, including drilling holes 12 mm dia 300 mm centre to centre or as close as possible and sealing the same hole after injection of the chemical emulsion with cement mortar 1:3 (1part cement : 3 part cement) without causing any damage to the household & office materials like wooden furniture electric fittings and any other materials including spraying to the entire affected area with the same chemical formulation etc. complete all as per specifications and as directed by the EIC.

Plain cement concrete using graded stone aggregate of 20mm max. size including consolidation, finishing, curing, cost of form work, shuttering, centering etc. complete all as per specifications & as directed by the Engineer-in-Charge.

Reinforcement for RCC work including supplying, delivering, storing of various diameters as required at site of work including loading, unloading, transporting, decoiling, straightening, cutting, bending, placing in position at all locations & levels and binding with 18 gauge, soft drawn annealed steel binding wire including carrying out various tests as required etc. all as per specifications,drawings & as directed by the Engineer in Charge.

Thermo Mechanically Treated bars of grade Fe-500 D manufactured by SAIL, TATA STEEL and RINL or other approved make conforming to IS 1786.

Reinforced Cement Concrete of following grade in foundation and plinth at all levels and locations conforming to I.S. 456-2000 using 20mm. maximum size down graded stone aggregate including machine mixing, conveying, placing in position, mechanical consolidation, finishing, curing etc. all complete as per specifications and drawings and as directed by the Engineer in Charge

M-30 For all type of Structural / RCC Elements

M-20 For floor

Extra for providing RMC (Ready Mixed Concrete) confirming to IS : 4926 (latest) in lieu of conventional RCC and PCC items supplied by approved RMC manufactures for all type of structural elements/ RCC elements and Misc works including transporting, pumping /manually etc. complete as per instruction of theEngineer in Charge.

Providing, erecting, fixing in position striking/removing and cleaning steel / timber shuttering & centering for formwork in foundation, plinth and superstructure at all levels and locations for all geometrical shapes in plain, curved surfaces of structural/RCC elements including chamfers, splays, keys, wedges, props, rails, bracings, brackets, cutting holes for pipes etc., providing & applying approved form oil on all surfaces of form work coming in contact with concrete including close hacking of all exposed concrete work after removal of form work, all materials, labour etc. all complete as per specifications, drawings and as directed by the Engineer-in-charge.

Providing cement: sand: 6mm aggregate 1:2:4 screed mortar average 30 mm thick mixed with approved water proofing compound @ 2% of weight of cement spread over the existing roof for obtaining proper slope towards the existing rain water spout, wherever required etc. complete including preparing surfaces consisting tapping by wooden ballet for hollowness of existing surface and repairing damaged locations all as per manufacturers specifications and as directed by the Engineer-in-Charge.

Brick masonry in sub structure / super structure at all floors and locations using well burnt bricks / fly ash bricks of approved quality, make in CM 1:4 (Using factory made Ready Mix Mortar only) to correct line, level and plumb including raking out joints, curing, scaffolding etc, complete all as per specifications and as directed by theEngineer in Charge.

a) In Sub-Structure upto plinth level

b) In Super-Structure above plinth level

Providing brick work 115mm thick in partition walls, dwarf walls, parapets, under platforms, etc. at all floors and locations using well burnt bricks of approved quality, make in C.M 1:4 (Using factory made Ready Mix Mortar only) to correct line, level & plumb including scaffolding, raking out joints, curing etc. including RCC (1:2:4) stiffeners 115mm.wide and 80mm. thick every one metre height including form work cost of steel reinforcement complete all as per specifications & as directed by the EIC. Note: Reinforcement shall be paid in relevant item.

Cement plastering using factory manufactured pre mix/ready mix mortar in CM 1:4 of 'Roofit Mix' of M/s. Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s. Ultratech Cement Ltd or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechanical mixing with water in a metalic tray only to make good consistency as per the specifications of the Manufacturer and applied on internal wall and ceiling finished smooth with wall care putty over brick walls or concrete surfaces at all floors and levels, including membrane curing by applying one coat of factory made curing compound Resikure of M/s Anuvi Chemicals, Concure of M/s fosroc, Dr. Fixit curing compound or other equivalent over repaired surfaces as per manufacturer's specification and removing existing damaged/ worn out plastering and disposing off debris out side colony etc. complete all as per specifications and as directed by Engineer in Charge.

12 mm thick

15 mm thick.

Providing & laying machine cut machine polished natural stones as mentioned for the followings for kitchen platform/wash basin counter/laborotary working platform topping and facia over and including necessary cement mortar for backing/ bedding, close jointed and grouted with matching cement slurry and finished to line, slope, level, plumb, curing etc, as required including cutting of stone slabs, wastage, making cut outs wherever required etc all as per specifications and as directed by Engineer in charge.

a) For kitchen platform / Wash Basin counter top, upto 750mm wide and upto 1800 mm length in single piece consisting machine cut machine polished on one side 30 mm thick cuddappa stone at bottom and mirror polished machine cut 18 mm thick Jet black Granite stone at top fixed with 52 mm thick 1:4 cement mortar (Using factory made Ready Mix Mortar only), between two stone slabs (Double stone slab sandwitch type) including providing cut out if any, moulding and polishing the edges etc complete .

b) For kitchen platform / wash basin counter horizontal facia upto 100 mm wide machine cut machine polished on one side 18mm thick Jet black Granite stone fixed with epoxy resin base (Araldite adhesive or equivalent) including round moulding and polishing the edges etc complete.

c) For horizontal beading of size 30 mm x16mm machine cut machine polished Jet black Granite stone fixed with epoxy resin base (Araldite adhesive or equivalent) including round moulding and polishing the edges etc complete .

Providing & laying machine cut machine polished Cuddapah stones/granite stone/marble stone as mentioned followings for kitchen platform vertical support /shelves /window cill etc and including necessary cement mortar for backing/ bedding, close jointed and grouted with matching cement slurry and finished to line, slope, level, plumb, curing etc, as required including cutting of stone slabs,wastage, making cut outs wherever required etc all as per drg, specifications, drawings and as directed by Engineer in Charge.

For 100mm thick vertical support of Counter/ platform, consisting of one side 30 mm thick machine cut machine polished on one side cuddapah stone slabs other side polished 18mm Granite of approved colour sandwiched between the stones with 52 mm thick CM 1:4 (Using factory made Ready Mix Mortar only) including providing exposed front face upto 100 mm wide vertical facia of polished 18mm thick same granite stone on exposed sides with epoxy resin base (Araldite or equivalent), 250mm one side granite rising above platform level with both side polishing including rubbing and polishing of cut edges etc complete all in line, level, plumb etc.

For vertical support of Counter/ platform, consisting of 2 nos 30 mm thick machine cut machine polished on one side cuddapah stone slabs sandwiched between the stones with 20 mm thick CM 1:4 (Using factory made Ready Mix Mortar only) including providing exposed front face upto 100 mm wide vertical facia of mirror polished 18mm thick jet black granite stone on exposed sides with epoxy resin base (Araldite or equivalent) including rubbing and polishing of cut edges etc complete all in line, level, plumb etc.

30 mm thick machine cut and both side machine polished Cuddaph stone for shelves including rubbing and polishing the exposed edges.

18 mm thick machine cut and both side machine polished granite stone of approved colour and shade and surface finish for shelves including rubbing ,full round moulding, polishing the exposed edges.

18 mm thick machine cut and single side machine polished Baroda green marble stone for window cill in stepped form laid over 20 mm thick 1:4 cement mortar (Using factory made Ready Mix Mortar only) & overlapping of 20 mm shall be fixed with Araldite adhesive with best workmanship, including half round moulding & polishing of exposed face etc complete.

18 mm thick machine cut and single side machine polished Baroda green marble stone for window jamb & bottom of lintel in single piece laid over 20 mm thick 1:4 cement mortar (Using factory made Ready Mix Mortar only) including half round moulding & polishing of exposed face etc complete.

18 mm thick machine cut and single side machine polished jet black granite stone stone for window cill in stepped form laid over 20 mm thick 1:4 cement mortar (Using factory made Ready Mix Mortar only) & overlapping of 20 mm shall be fixed with Araldite adhesive with best workmanship, including half round moulding & polishing of exposed face etc complete.

18 mm thick machine cut and single side machine polished jet black granite stone for ledge wall top, window jamb & bottom of lintel in single piece laid over 20 mm thick 1:4 cement mortar (Using factory made Ready Mix Mortar only) including half round moulding & polishing of exposed face etc complete.

18 mm thick granite stone of jet black colour with flamed /mirror finishing for flooring/ramp with 100 mm wide strip with stone slabs of required size & fixing in pattern including 20 mm thick 1:4 (Using factory made Ready Mix Mortar only) cement mortar bedding including polishing / edgeing to exposed face etc. complete.

18 mm thick granite stone of approved colour and shade and surface finish for counter/dado/ skirting/cladding/staircase riser with stone slabs of various size in pattern including 12 mm thick 1:3 (Using factory made Ready Mix Mortar only) cement mortar bedding for fixing etc., complete as directed by Engineer in Charge.

18 mm thick granite stone of approved shade,colour with leather /lapato finish for flooring / staircase tread with stone slabs including edging, full half round moulding, machine polishing to edge to give high gloss finish, making 3 rows of 5 mm X 5mm grooves by machine and including 20 mm thick 1:4 (Using factory made Ready Mix Mortar only) cement mortar bedding.

18 mm thick granite stone of approved colour and shade and surface finish for Flooring with stone slabs of various size in pattern including including 20 mm thick 1:4 (Using factory made Ready Mix Mortar only) cement mortar bedding. etc., complete as directed by Engineer in Charge.

For counter/ platform / Wash Basin counter top, upto 750mm wide and upto 1800 mm length in single piece consisting machine cut machine polished on one side 30 mm thick cuddappa stone at bottom and mirror polished machine cut 18 mm thick granite stone of approved colour and shade and surface finish at top fixed with 52 mm thick 1:4 cement mortar (Using factory made Ready Mix Mortar only), between two stone slabs (Double stone slab sandwitch type) including providing cut out if any, moulding and polishing the edges etc complete .

Urinal partitions with 18mm thick jet Black Granite/ steel grey stone mirror bothside polished and half rounding on all exposed faces, fixed in the floors and walls making necessary recesses of about 25mm and fixing with necessary S.S. pins, clamps, grouted, sealed and finishing the chases with Cement mortar 1:3 etc. complete as per detailed architectural drawing to entire satisfaction of the Engineer in Charge.

Providing and fixing in position at all floors, levels / heights 18 mm thick mirror polished natural stones slab for door frame in two overlapping layers one piece full length / height of approved shade, finished sizes as directed including machine cut / hand cut, final cleaning, moulding and polishing of exposed edges, in line, level, plumb and fixing the stone with cm 1:3, 20mm backing & overlapping of 20mm shall be fixed with Araldite adhesive, with best workmanship, finishing, curing, including removing existing door frame, shutter & fittings etc.and depositing the same at dept store etc. complete all as per specifications, drawings & as directed by the Engineer in Charge.

Jet Black Granite Stone

Baroda Green marble Stone

Providing & laying flooring / skirting with antiskid Vitrified tiles of first quality Endura of M/S H&R JHONSON (INDIA) Ltd or M/s. Pavit or as approved equivalant of size 600mm x 600mm x 10mm & 15/16mm thick in required pattern and combination of series & Colour or as per manufacturer's specifications, laid directly over tile using polymer cum cement based adhesive manufactured by Roffe construction – NSA (non skid adhesive) or M/s Ardex Endura chemicals– Gold star or other approved equivalent make/removing existing flooring and fixing new flooring using 20 mm thick c.m. bedding with necessary cement slurry of required consistency under and over cement mortar bedding in respect of flooring and fixed over 12 mm thick backing cement mortar 1:4 (Using factory made Ready Mix Mortar only) in respect of skirting , close jointed and grouted white /colour cement slurry with pigments to match the colour of the tiles, finished to level, line, slope and plumb including cutting of tiles, making openings / cut out wherever necessary including wastage for odd shape of room and final cleaning of surfaces as required, curing, etc. complete all as per specification, drawings,relevent IS code & as directed by the Engineer-in-Charge.

In flooring with 600 mm X 600mm X 10mm or as specified

In dado / Skirting Tiles of size as specified in 10mm thick including removing existing entire paint, plaster upto the brick work/concrete surfaces and new replastering in CM 1:4 (using factory made ready mix mortar only) and fixing of dado tile with polymer cum cement based adhesive as mentioned above.

In flooring with 600mm x 600mm x 10mm & 15/16mm or as specified

In dado / Skirting Tiles of size as specified in 15/16mm thick

Providing & laying flooring / skirting with antiskid and Chemical /Acid resistant Vitrified tiles of first quality Endura of M/S H&R JHONSON (INDIA) Ltd or M/s. Pavit or as approved equivalant of size 300mm x 300mm x 15mm or 200mm x100mm x15mm in required pattern and combination of series & Colour or as per manufacture's specifications, laid directly over tile using polymer cum cement based adhesive manufactured by Roffe construction – NSA (non skid adhesive) or M/s Ardex Endura chemicals– Gold star or other approved equivalent make/removing existing flooring and fixing new flooring using 20 mm thick c.m. bedding with necessary cement slury of required consistency under and over cement mortar bedding in respect of flooring and fixed over 12 mm thick backing cement mortar 1:4 (Using factory made Ready Mix Mortar only) in respect of skirting , close jointed and grouted white /colour cement slurry with pigments to match the colour of the tiles, finished to level, line, slope and plumb including cutting of tiles, making openings / cut out where necessary including wastage for odd shape of room and final cleaning of surfaces as required, curing, etc. complete all as per specification,drawings, relevent IS code & as directed by the Engineer in Charge.

In flooring with 300mm x 300mm x 15mm or as specified

In dado / Skirting Tiles of size as specified in 15mm thick

Providing & laying all floors & levels first quality ceramic tiles of minimum thickness as specified by the manufacturer of M/S. H&R JHONSON (INDIA) Ltd. or equivalent approved make of approved colours, shade and texture in flooring / dado / skirting as per approved pattern. incluidng cost of all materials, including cutting the tiles to required shape, wastage, pointing the joints with white cement mixed with matching pigments to match the colour of the tiles, finished to line, level, slope & plumb, final cleaning of surface as required, curing , making necessary opening cutouts etc.and including removing existing flooring / dado and disposing of debris outside colony complete all as per specifications,drawings, relevant IS code & as directed by the EIC.

In flooring with rectified ceramic tiles of size 300 x 300 (approx size ) Digital HD series of M/s H& R Johnson or equivalent approved make with 20 mm thick 1:4 Cement mortar bedding (Using factory made Ready Mix Mortar only)

In flooring with anti skid tiles of size 300 x 300 mm x 12 mm th ( approx size) Checkered Ivory of Endura tiles of M/s H& R Johnson or approved equivalent with 20 mm thick 1:4 Cement mortar bedding (Using factory made Ready Mix Mortar only)

In dado / Skirting with tiles of 300X600mm (Approx size) of Digital HD Series of M/s H&R johnson (India) Limited or approved equivalent fixed over 12 mm thick 1:4 cement mortar (Using factory made Ready Mix Mortar only) backing / fixed directly over existing tile with polymer cum cement based tile adhesive manufactured by M/s. Roffe construction (Non-Skid Adhesive, NSA) or M/s Ardex Endura (Gold Star) or other approved equivalent, jointed with cement slurry & grouted with pigment of matching shade & finishing the top of skirting/dado etc. complete.

Providing & laying Tread/Riser/flooring/skirting with antiskid step tile quality Endura of M/S H&R JHONSON (INDIA) Ltd or M/s. Pavit or as approved equivalant of required size in required pattern and combination of series ,pattern & Colour or as per manufacturer's specifications, including necessary cement mortar for backing/ bedding, close jointed and grouted with matching cement slurry,fixed and finished to line, slope, level, plumb, curing etc, as required including cutting of stone slabs,wastage, making cut outs wherever required etc all as per drg, specifications, drawings and as directed by Engineer in Charge.

15 mm thick Endura step tile tread of approved colour and shade and surface finish for Tread with stone slabs of various sizes in single piece or pattern including 20 mm thick C:M 1:4 (Using factory made Ready Mix Mortar only) cement mortar bedding. etc., complete all as directed by Engineer-in-charge.

15 mm thick Endura step tile Riser of approved colour and shade and surface finish for Riser with stone slabs of various size in single piece or pattern including 20 mm thick C:M 1:4 (Using factory made Ready Mix Mortar only) cement mortar bedding. etc., complete all as directed byEngineer in Charge.

15 mm thick Endura step tile Landing flooring of approved colour and shade and surface finish for Flooring with stone slabs of various size in single piece or pattern including 20 mm thick C:M 1:4 (Using factory made Ready Mix Mortar only) cement mortar bedding. etc., complete all as directed by Engineer in Charge.

15 mm thick Endura step tile Skirting to landing and starcase of approved colour and shade and surface finish for Skirting with stone slabs of various size in single piece or pattern including 20 mm thick C:M 1:4 (Using factory made Ready Mix Mortar only) cement mortar bedding. etc., complete all as directed by Engineer-in-charge.

Providing 3 mm thick and 8/10/16 mm deep grout line using PVC spacers for creating true alignment and gap between vitrified tile flooring & Skirting at a specified places as per drawings / as directed and grouting the joints with matching cementitous tile grout mixed with approve tile additive of M/s. Roff Construction or approved equivalent including cleaning the surface etc complete all as per specifications and as directed by the Engineer-In-Charge.

Providing and fixing shone tiles or equivalent first quality glass mosaic tiles in dado / skirting at all floors and levels using tiles manufactured by M/s. Shoen Ceramics or approved equivalent of approved colour, shade,design and pattern and texture with 12 mm thick C:M 1:4 (Using factory made Ready Mix Mortar only) backing plaster or laid directly over tile using polymer cum cement based adhesive of approved as per manufacturer or approved by department including cutting, wastage, jointed with cement slurry, pointing with white cement having matching shade pigment, finishing in correct level, line, slope, plumb, cleaning, curing and including removing old / existing dado/skirting with backing plaster etc and disposal of debris outside Anushaktinagar colony etc. complete all as per specifications & as directed by the Engineer-in-Charge.

20mm X 20 mm or as specified size tiles in single shade

20mm X 20 mm or as per specified size tiles in design,pattern in multi colour in different proportions as per detailed sketch mural pattern.

Providing & fixing IInd class teak wood in frames of required sections for windows, ventilators, shaft doors, partition etc. wrought framed and fixed in position including providing & fixing necessary GI holdfast 3 nos.(minimum) on each side of frame of size 300mm x30mm x3mm thick embeded in plain cement concrete 1:3:6 in case of brick work or bolted / screwed with S.S .coach screw 100mm long in case of RCC/stone including making holes in concrete masonry walls etc. and fixing frame in position including applying two coats of synthetic enamel paint of approved make and shade over a coat of approved wood primer for the exposed surfaces & two coats of bituminous paint to the surfaces of frames in contact with masonry / concrete etc. including removing the old damaged frames stacking serviceable material and disposing of debris outside Anushakti nagar colony etc. complete all as per specifications and as directed by the Engineer-in-Charge.

Removing carefully the existing flush door shutters and refixing the same to its position after laying new tiles on flooring including cutting the shutters at bottom portion as per site condition , lipping the cut exposed surface with teak wood lipping including nails, screws,adhesive etc complete all as directed by the Engineer-in-Charge.

Supplying & fixing in position the following type solid core block board flush door shutters with commercial ply / teak veneer as specified below conforming to IS 2202-latest, with 20 mm thick teak wood lipping alround, fixing shutters in position to existing door frames at all floors by cutting/ plaining if necessary including the labour for removing & refixing old fittings & fixtures and for fixing of the fittings & fixtures with wooden packing pieces if necessary with screws, providing vision panel of various sizes up to a max size of 300mmx450mm wherever specified including suitable moulded first class teak wood beading on both sides and providing specified approved glass of 5 mm thk, ,Wooden louvers at bottom as per size,specification,drawing, , one coat of approved primer on commercial ply surface etc.including removing existing damaged shutter,fittings and depositing at Dept. stores etc. complete all as per specifications & as directed by Engineer-in-Charge..

For Door 32 mm thick commercial ply on both sides without louver and Vision Pannel

For Door 35 mm thick commercial ply on both sides without louvers with vision pannel

For Door 35 mm thick commercial ply on both sides with louvers and vision pannel

Supplying & fixing in position the 38mm thick single/double leaf solid core block board flush door shutters with hot pressed using BWP marine ply facing on both the sides with exterior quality synthetic adhesive; internally lipped, shutter shall be finished by 1.0 mm thick lamination on both faces, at factory during hot pressed etc. as manufactured by M/s. Kutty or equivalant conforming to IS 2202 (latest) with internal type second class teak wood lipping alround, fixing shutters in position to wooden door frames/granite frame works (door frames shall be paid separately under relevant item) at all floors & levels, height/lead, wastage, by cutting / planing if necessary including labour for fixing of the fittings & fixtures as per drawing with wooden packing pieces if necessary (but excluding the cost of fittings and fixtures with screws which shall be paid separately under relevant item) including providing 38mm x 6mm thick 2nd class teak wood external beading/lipping using exterior quality synthetic adhesive and headless GI nails, screws, providing vision panel of various sizes up to a max size of 300mmx450mm wherever specified including suitable moulded first class teak wood beading on both sides and providing specified approved glass of 5 mm thk etc.(Beading Kiln seasoned, antitermite treated), beading shall be finished with 2coat approved synthetic enamel paint over 1 coat approved primer after necessary preparation of surface to smooth finish etc. for the following all as per specifications, drawings & as directed by Engineer in Charge.

Double leaf doors For structural opening size up to 1500mm x 2145mm including providing "Z" shape rebate at meeting styles using approved quality 2nd class teak wood beading of size 38mm x12mm.

Providing & fixing wall panelling at all floors & locations consisting of following thickness water proof Marine ply wood conforming to IS 710 & with 3 mm thick teak wood veneer fixed on 2nd class teak wood frame work on walls including suitable SS screws of required size and including providing 3 mm wide grooves between veneer panels of different shades (dark & light colour) including providing & fixing half round teak wood beading wherever required including scaffolding, tools, screws, rawl plug, making cutouts for electrical fittings & fixtures with shutters, handles, hinges and including disposal of debris outside Anushaktinagar colony etc complete all as per specifications and pattern as directed by the Engineer-in-Charge.

12 mm thick marine Ply

8mm thick marine ply

3 mm th veneer

Providing marine ply of 19 mm thick conforming to latest IS -710, for making / repairing of wooden cupboards/cabinet etc at all floors and levels, including cutting to required sizes and jointing and fixing the same with necessary screws, adhesives, providing and fixing teak wood lipping to all exposed faces of ply wood and including wastasge, transportation and including removing old damaged cupboards/cabinet and refixing the same after repair, including removing & refixing all fittings & fixtures and depositing unserviceable cupboards to departmental store etc complete all as per specifications and as directed by the Engineer-in-Charge..

Providing and fixing 1.0 mm thick decorative laminated sheet of plain /wood grain in gloss / matt finish of approved make with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S, including cost of adhesive of approved quality,removing and refixing door shutter, cutting, including cutting the shutters at bottom portion as per site condition ,wastage including disposal of debris outside colony etc complete all as per specifications and as directed by the Engineer-in-Charge..

Providing and fixing IInd class C.P. teak wood moulded beading (architrave) of sizes mentioned below around door & window frames at all floors & locations with necessary screws including two coats of painting with one coat of approved primer including cost of screws, wastages in cutting, transportation etc. including removing the old damaged beading and disposing the same complete all as directed by the Engineer-in-Charge.

size 40 mm x 20 mm.

Providing and laying polyvinylchloride(PVC) tiles manufactured by M/S Bhor/premier /Responsive or other approved equivalent make of thickness specified below of approved colour, pattern and designs for flooring, skirting/dado fixed with suitable adhesive as per manufacturer's specification including surface preparation etc. & disposal of debris outside colony etc complete all as directed by engineer-in-charge

PVC flooring 3mm thick 4" X 24" size (Wooden Textured emboss)

PVC flooring 6.5mm thick over existing flooring

Supplying & fixing 25 mm thick PVC integral free foam sheet in form of flush finish door shutter, manufactured by M/s. Jain Irrigation Systems Ltd. (Ex-cel sheet) , Rajashree Plastiwood or other equivalent approved make of white colour, solid section, extruded rigid, light weight sheet with fine & homogeneous closed cell structure with smooth, glossy, hard surface finish on both sides including providing recessions for hinges and providing & fixing 3 nos 100 mm heavy duty S.S. hinges and 2 Nos. 100 mm heavy duty aluminium baby latches, 2 nos. of 100 mm Al. Bow handles with back plate of M/s Shalimar Hardware or equivalent and including providing a vision panel opening of size 300 mm X 200 mm including providing and fixing PVC moulded louvers on both faces in the opening of vision panel with ss screws, all edges to be smooth finish with mixture of PVC powder & solvent etc complete all as per specifications and as directed by the Engineer-in-Charge..

Supplying & fixing 10/18mm thick PVC integral free foam sheet in form of flush finish door shutter, manufactured by M/s. Jain Irrigation Systems Ltd. (Ex-cel sheet), Rajashree Plastiwood or other equivalent approved make of white colour, solid section, extruded rigid, light weight sheet with fine & homogeneous closed cell structure with smooth, glossy, hard surface finish on both sides all edges to be smooth finish with mixture of PVC powder & solvent etc including dismantling the existing plywood/A.C sheet shutters, removing and refixing of architraves with necessary screws, stacking serviceable material and disposing off debris out side Anushaktinagar colony etc. complete all as per specifications and as directed by the Engineer-in-Charge.

10 mm Thick

18 mm Thick

Providing & fixing approved quality Pre-laminated / unlaminated Bison board of 12 mm (one side laminated) including cutting to required size and fixing the same with necessary nails screws /adhesives for partitions, cupboards, shelves, kitchen cabinets, wall panels, ceiling, window cill & jambs etc. at all floors & locations including providing and fixing 6 mm thick teak wood beading to all exposed edges of bison board, cost of fixing the fittings including removing shutters/ shelves and transporting to deptt. stores complete all as directed by the Engineer-In_charge.

Pre-laminated Bison board with decorative lamination on one side

un-laminated Bison board

Supplying and fixing following type of fittings, fixtures and fastenings of approved quality along with necessary CP brass screws, bolts, nuts, washers and other standard accessories etc. complete all as directed by the Engineer in Charge.

a) SS Piano hinges overall width of 19mm

Supplying & fixing matt finished, anodised aluminium heavy quality fittings, fixtures and fastenings of approved quality, along with CP brass screws, bolts and other accessories as per approved samples. complete all as per specifications and as directed byEngineer in Charge

Baby latch 75 mm long x 12 mm barrel bolt

Handle 100 mm long

Aluminium Door stoppers with rubber bushing

Supplying and fixing heavy duty superior quality fittings , fixtures and fasteners along with necessary CP screws, bolts, nuts, washers etc. as per approved samples. etc. complete all as directed by the Engineer-in-Charge.,

S. S Bow Handle 150 mm. long 10mm dia solid

S.S Tower bolt 300 mm long with 10 mm dia barrel

S.S Aldrop 250 mm long , 14 mm dia Barrel. with extra locking arrangement

Stainless steel butt hinges as per catalouge No Hafele- 926.14.403 or Equivalent

Providing & fixing concealed door mortise lock (rebated) conform to I.S. 6607 six lever heavyduty to be fixed in Aluminium/wooden shutters)with necessary fittings, CP screws etc., complete all as directed by Engineer-in-Charge.

Supplying, fabricating and fixing in position at all floors factory made Aluminium grill /Aluminium sliding/top hung/fixed/ adjustable louvered windows & ventilators with rivit joint of specified size, made of integrated bronze anodised matt finished (15micron thick) aluminium section (extruded) , including for making exhaust fan frame work, handles of specified size etc, of approved manufacutres for following types with extruded sections of Jindal / Indal / Aluminax or other approved equivalent make of approved sections with size and wights as directed for frames and shutters(including wastages if any) wherever mitred joints required confirming to relevant IS specifications with all approved Bronze anodised aluminium fittings and accessories, latching fixture, 2/3 rollers with ball bearing of superior quality all as shown in the drawing including providing and fixing aluminium channel beading/glazing clips fixed with necessary bronze anodised screws, grouting the gap with sealant and including dismantling of existing window frame and shutter, glass and depositing same to Dept store etc all complete generally as per drawing, specifications etc, all as directed by Engineer-in-Charge..

All Aluminium sections for window, grill and other work.

Providing and fixing aluminium grill 10mm thick DECO GRILLE make model no DG202 (Red colour) in approved colour anodising of Min 15 mircon with a opening size of 60mm X 45mm and minimum weight of 4.282 kg/Sqm including providing and fixing suitable F & H frame section outer frame and mullion fixing with screw, double tubular necessary scaffolding complete. all as per specification and as directed at site by the Enginer-in-Charge (Aluminum alloy shall be of 6063-T6 with yeild strength of 6.5Kg/Sqm)

Providing and fixing following thickness of clear float/ frosted / Bajara sheet glass of M/S Triveni/ shree vallabh/ IAG/Modi guard/ Saint Gobin or other approved equivalent manufacture and fixing with Aluminium frame work (door/ window) including fixing aluminium channel beading and providing and fixing 2 way EPDM gasketing to ensure water and air tightness and neoprene cushions/ gasket accommadated in grooves, necessary bronze anodised screws etc, all complete generally as per drawings specifications and as directed by Engineer in Charge

6 mm thick clear float glass

5 mm thick clear float glass

5 mm thick Bajra sheet glass

3 mm thick Bajra sheet glass for louvers

Removing carefully exsisting sliding window for making of marble frame as per drawing, specification, repairing and refixing the same with replacing deteoriated/damaged fittings of approved Bronze anodised aluminium fittings and accessories, latching fixture, rollers with ball bearing of superior quality all as shown in the drawing including with necessary bronze anodised screws, grouting the gap with sealant etc all complete generally as per drawing, specifications etc, all as directed by Engineer-in-Charge.

Providing and fixing fly proof stainless steel 304 grade wire mesh of 28 gauge in the aluminium sliding door / window and clear story window, using wire gauge with average width of aperture 1.4 mm in both directions including providing and fixing of stainless steel screws and washer at maximum distance of 300 mm complete all as directed by Engineer-In-Charge.

Providing and fixing wall panneling with 12mm thick toughned Glass with etching pattern / back painted/ airbrushed on the aluminium section framing including providing and fixing of stainless steel screws and washer at proper distance complete all as directed by Engineer-In-Charge. Note:- Aluminium will be paid in relevant item of Aluminium sction.

Providing and fixing sleek model approved quality hydraulic door closer of M/s. Eeverite / HARDWYN with necessary screws, fixing to the aluminium / glass /wooden door complete as per drawings, specifications including all labour, transporting etc. and as directed by the Engineer-in-Charge

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-Charge.

Providing and fabricating and fixing in position structural steel grills at all level, using M.S. angles, flats, bars etc. with anchor fasteners of suitable dia in the marble jambs & cills including painting by dipping with two coats of synthetic enamel paint of approved shade & make and one coat of approved steel primer, including cutting,fabrication, welding etc complete all as per specification and as directed by the Engineer in charge.

Removing carefully exsisting window M.S. Grill for making of marble frame as per drawing, specification, repairing and refixing the same with replacing deteoriated/damaged part / correction in size as per new marble opening including with necessary new anchor fastener, two coats of approved synthetic anamel paint over one coat of approved steel primer etc all complete generally as per drawing, specifications etc, all as directed by Engineer-in-Charge. Note: marble frame, structural steel shall be paid in relevant item (only deterioated/existing damaged).

Providing and fixing stainless steel for sign boards / structural steel / staircase hand rail with 2mm thick perforated stainless sheet panels using seamless pipe/tube of designed dia pipe, Square, tees, angles, plate and other sectiones as required for hand rail/grab rail /structural steel work with brushed finished/satin matt finished at stair case & lobby / passage and other locations as required, at all floors & levels conforming to SS-304 grade of steel and Relevant schedule, as per pattern & design shown in drawing / directed by Arch., EIC including necessary S.S bend, tees,brackets, base/cover plate and holders clamps to hold pans in all size & shapes etc welding/nut bolt necessary anchoring, polishing and fixing in concrete/brick wall with S.S lugs/anchor fasteners ,making pockets, concreting, making good the surfaces including all wastages etc. as per specifications drawings,including removing existing and as directed by Engineer-in-Charge..

With SS-304 including all specials fittings,brackets etc.

2mm thick perforated S.S. Sheet

Repolishing of existing polished wooden railing surface with three coat of Melamine polish above two coats french polish of approved make and shade including preparing surfaces, filling with filler, scaffolding and cleaning etc. including removing old paint by scrapping, blowlamp etc.complete all as directed by the Engineer in Charge.

Lettering on Stainless steel sign board by engraving on indication boards upto 3" height in approved lettering size and bond with approved shade, colour & Brand and as per manufacture specification including cost of finishing paints, tools, scaffolding etc. complete all as per specifications and as directed by the Engineer in Charge.

Repainting of old painted surfaces with two coats of Acrylic premium emulsion paint of approved make & shade over two coats of approved primer (alkali resistant) consist of thoroughly scrapping oil bound distemper /acrylic emulsion / white wash surface, applying a coat of approved cement primer, filling up the cracks with approved crack filling compound , applying approved stucco putty to entire surface to fill up crevices, mild depression etc. thoroughly scrapping the surface, applying 2nd coat of approved cement primer carrying out full stucco putty work , apply two coats of acrylic emulsion paint including necessary covering material and removal of splashings & droppings from floors, walls including scaffolding, ladder as required & disposing of debris inside colony etc. complete all as directed by the Engineer-in-Charge.

Repainting of old painted external surfaces of with two coats of exterior grade Acrylic emulsion paint of approved manufacture of approved colour and shade over a coat of cement based water repellent paint of approved make and shade as mentioned below all as per manufacturer's recommendations and as per the approved sample including thoroughly scrapping, removal of old paint if any, sand papering & preparing the surfaces, providing necessary scaffolding/ staging, cleaning the surface with water to remove all coating,dust, filling up cracks & crevices with approved putty, curing the surface etc. at all heights, locations and lead etc.,complete as per specifications and as directed by Engineer in Charge.

Repainting of old painted surfaces with two coats FLAT oil paint of approved shade and make over one coat of approved cement primer, including thoroughly scrapping, removal of old paint if any, sand papering & preparing the surfaces, applying approved stucco putty to entire surface to fill up crevices mild depression etc. scaffolding including cleaning of floors, doors & windows etc.& disposing of debris inside colony etc. all as per specifications and as directed by theEngineer in Charge.

Repainting of old painted wooden/steel surfaces with two coats of synthetic enamel paint using first quality synthetic enamel paint of approved make and shade over one coat of approved wood/steel primer including preparing surfaces, filling with putty scaffolding and cleaning etc. including removing old paint by scrapping, blowlamp etc.complete all as directed by the Engineer in Charge.

Polishing on Cuddappa work/kotah work/Granite work/Marbel where ever required to give high gloss finish & disposal of debris inside coloney etc. complete as directed by Engineer-in-chargee

Description of Work / Item(s)

Amount

PART II - PUBLIC HEALTH WORKS

Providing and fixing EWC closet suit comprising : a)European water closet with 'P' or 'S' trap similar to Model- Slick of M/s Hindware (Cat No.20011 -) make Sanitary ware in white glazed vitreous chinaware. b) Solid plastic heavy quality seat with lid similar to M/s. Hindware or approved equivalent and including cost of removing the existing one & disposing of debris out side colony etc complete all as per specification and as directed by the Engineer-in-Charge.

Providing & fixing approved WHITE Orissa pattern W.C. of M/s. Hindware make model no - Comfort-20070/Eco-20042) or approved equivalent with 'P' or 'S' trap in white glazed vitreous china ware of size 580 mm x 440 mm conforming to IS, including the cost of removing the existing damaged / broken and making good the surrounding with cement mortar / concrete to the existing finish & disposing of debris out side colony etc complete all as per specifications and as directed by the Engineer-in-Charge.. NOTE: In case of non availibility, other approved make as mentioned in 'Specification for Public Health Engineering Works' may be considered.

Providing and fixing Vitreous urinal of Starwhite (Standard) colour of Hindware Make Flat Back Large-Cat. No. 60002 consisting following items of work. i) Providing urinal of approved make, and placing it in position as shown in the drawing or as per manufactures specification or as directed including finishing the joints with white / matching colour cement all complete ii) Providing various CP fittings such as Waste Coupling of Jaquar Cat No. 705/709, Bottle Trap of Jaquar Cat. No. 769, 15mm dia Heavy duty connector with both side brass nuts, heavy duty brass spreader -Jaquar Cat approved by EIC suitable to the Urinal fitting- including provision and fixing 32 mm minimum 10kg class PVC pipe conforming to IS:4985 (and fittings conforming to IS:7834) Waste Pipe from Bottle trap to adaptor / Nahani trap / Floor Trap. iii) Fixing the urinal in position, including providing M.S. Brackets & Screws for the urinal as per Manufactures specification or as directed by Engineer-in Charge. iv) Cutting hole, making grove or chases in the wall, floors, slabs etc., reinstating to it's original condition after completion of work, painting all metallic parts with two coats of flat oil paint of approved make & shade over a coat of primer, finishing the gaps etc. all complete as directed by Engineer-in Charge. v) Testing the system to the full satisfaction of the Engineer in Charge

Providing and fixing Vitreous China Wash Hand Basin in sandwich counter or counter top or on bracket, Consisting of Star White colour of Hindware Make following items of work. etc.depositing serviceable material at dept store & disposing of debris out side colony etc complete all as per specifications and as directed by the Engineer-in-Charge. Item including following fittings and fixtures i) Providing Wash Basin and placing it in position as shown in the drawing or as per manufactures specification or as directed including finishing the joints with white / matching colour cement all complete. ii) Providing various CP fittings such as Waste Coupling of Jaquar Cat No. 705/709, Bottle Trap of Jaquar Cat. No. 769 including fixing 32 mm minimum 10kg class PVC pipe conforming to IS:4985 (and fittings conforming to IS:7834). Placing and fixing Waste Pipe from Bottle trap to adaptor / Nahani trap / Floor Trap. iii) Fixing the Wash Basin in position, including providing M.S./C.I. Brackets & Screws for the basin iv) Cutting hole, making groove or chases in the wall, floors, slabs etc., reinstating to it's original condition after completion of work, painting all metallic parts with two coats of flat oil paint of approved make & shade over a coat of primer, finishing the gaps etc. all complete as directed by Engineer-in Charge v) Testing the system to the full satisfaction of the Engineer in Charge.

550 mm x 400 mm ( Approx Size ) MARIO Cat No. -10087

460 mm x 330 mm. ( Approx Size ) DUNE Cat No.-10088

560 mm x 410 mm ( Approx Size ) OVAL Cat No. -10017

490 mm x 360 mm ( Approx Size ) MINI OVAL Cat No. -10051

Providing & fixing approved C.P. brass towel rods of size 600 mm long with 12MM DIA. a pair of C.P. brass brackets, wall flanges etc. of M/s. Jaquar cat No. ACN-1111NM or equivalent fixed to wall with C.P. brass screws, screwed on to rawl plugs etc complete including the cost of removing the existing one & returning to Stores etc complete all as per specifications and as directed by the Engineer-in-Charge.

Providing braided hose with nuts, nipples etc. for Water supply Inlet connection of following make for wash basin, flush tank, kitchen sink etc with brass check nuts on both ends and fixing it in position as directed including the cost of jointing materials and testing for leak proof joints all complete.

600mm Long Braided Hose with Two 15mm Nuts & Rubber Washers similer to Jaquar cat. No. ALD-805B or equivalent in equivalent in Roca/Toto.

450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers of Jaquar cat. No. ALD-805B or equivalent in equivalent in Roca/Toto.

Providing and fixing approved quality 10 Ltrs. capacity PVC flushing cistern of Hindware Sleek Fresh with odorizer slot having Dual flush white colour or approved equivalent with all internal non ferrous fittings, pull chain including P&F inlet PVC connectors of approved make and quality and outlet connections and wall mounted on brackets, including providing and fixing PVC flush pipe Everlas or equivalent of 32 / 40 mm dia. to a length 1.00 M (approximate) and connecting to the flush tank with proper check nut and connecting to the W.C. pan and making leak proof joints etc., including cost of making chases in the wall, floors, removing the existing one depositing to Deptt. Stores etc.complete all as directed by the Engineer-in-Charge.

Supplying & Fixing Stainless steel Sink of following size of approved make, moulded out of 19 SWG (1 mm ) stainless steel sheet of grade AISI 304 (18/8) with waste coupling conforming to IS 13983, placing and fixing the Sink in position to correct line and level with basket type choke-stop strainer, waste coupling , Check nuts etc. including the cost of jointing materials, finishing the edges with white / matching colour cement as per manufacturer's recommendation all complete, including cost of fixing bottle trap etc. as per specification and as directed by the Engineer in Charge.

Supplying and Fixing Stainless steel Sink' Nirali-Grace Plain' with 'Anti scratch surface' of overall size 610mm x 460mm ( Bowl size 560mm x 410mm x 250 mm )

Providing and fixing in position Stainless Steel Sink of size 1145mm x 510 mm of Nirali make Elegance moulded out of 19 SWG (1 mm) thick anti-scratch Stainless Steel Sheet of grade AISI 304 conforming to IS 13983 consisting following items of work i) Providing Stainless Steel Sink and placing it in position as shown in the drawing or as directed including finishing the joints with white / matching colour cement all complete ii) Providing various CP fittings such as Basket type Choke-stop Strainer of Nirali. iii) Fixing the Sink in position as per Inset Fitting of manufacturers including providing necessary clips and screws for the same iv)Cutting hole, making grove or chases in the wall, floors, slabs etc., reinstating to it's original condition after completion of work, painting all metallic parts with two coats of flat oil paint of approved make & shade over a coat of primer, finishing the gaps etc. all complete v)Testing the system to the full satisfaction of the Engineer in Charge

Removing and refixing existing Stainless steel sink along with other accessories, including labour charges, cleaning, testing, including providing and fixing pvc waste pipe etc. Complete all as per specifications and as directed by Engineer-in-Charge.

Providing & fixing in position best quality bevelled edge plate Glass Mirror of Various size & 6mm thick with marine ply wood back 6 mm thick, CP brass cup screws and caps, washers etc. including providing & fixing rawl plug in wall, wooden packing behind the mirror if necessary, reinstating the damages to its original condition etc. and painting the ply with 2 coats of Synthetic enamel paint over a coat of wood primer etc. complete all as directed by the Engineer-in-Charge.

Providing & fixing in position approved quality CP brass Bib tap / Sink tap etc. of 15 mm nominal dia. with IS mark / approved make of following type including providing & fixing GI specials ,wall flanges and fixing to concealed / exposed G.I.pipe line with leak proof threaded joints using spun yarn, white zinc etc., testing the joints, rectifying the leaky joints, if any, including cleaning etc. complete all as per specifications and as directed by Engineer- in- Charge.

C.P brass Sink Tap with swinging casted Spout (wall / table mounted type ) similar to 'FLORENTINE series' of ' JAQUAR' Cat. No. 5347/5357

C.P brass Bib tap with wall flange, .similar to 'Continental series ' of ' FLORENTINE' Cat. No. 5047

C.P brass long body Bib tap 2 in 1 similar to . FLORENTINE Series' of ' JAQUAR' cat. No. 5041 including providing and 'fixing Health faucet with 1.0 mt long flexible tube and wall hook( JAQUAR make Cat. No. 573)

Providing & fixing in position 15 mm diameter CP brass Stop Cock / Angle cock confirming to IS / approved make fixing the cock in position with white zinc and spun yarn, testing the joints for leakage etc. all complete as per specifications and as directed by EIC

Angular Stop Cock with wall Flange similar to 'FLORENTINE Series' of ' JAQUAR' cat. No. 5053

Providing & fixing in position 15 mm diameter CP brass Pillar Cock conforming to IS/approved make fixing the cock in position with inlet connection using white zinc and spun yarn testing the joints for leakage etc. complete all as per specifications and as directed by EIC.

C.P brass Pillar Cock 15 mm size having auto closing system similar to 'PRESSMATIC TAPS Series' of JAQUAR Cst. No. PRS-031

C.P brass Urinal Valve Auto Closing System with Built-in Control Cock 15 mm size similar to 'PRESSMATIC TAPS Series' of JAQUAR Cst. No. 077 along with heavy duty pvc connector and CP brass sprader approved by Engineer in Charge.

Providing & fixing in position approved quality CP brass Wall mixer, 15 mm nominal dia. with IS mark and / approved make of following type including providing & fixing wall flanges and fixing to concealed / exposed water supply pipe line with leak proof threaded joints using spun yarn, white zinc etc., testing the joints for leakage all per specifications and as directed by Engineer in Charge.

Wall mixer with provision of over head Shower with 115 mm long bend pipe & wall flange similar to' 'FLORENTINE' of 'JAQUAR' cat. No.5273

Providing & fixing in position CP Brass / Matt Chrome approved quality Shower of following type, fixing it to GI pipe line including jointing with white zinc and spun yarn etc., testing the joints etc all complete all as per specifications and as directed by the Engineer-in-Charge.

C.P brass Rose Shower with revolving joint similar to OHS-CHR-1985 & shower arm light body with wall flange similar to SHA-CHR-477 M/s. JAQUAR'

Providing & fixing in position 550mm x 100mm wide & 6 mm thick Glass shelf with brass brackets of approved quality and fixing the Glass shelf on the wall to proper line & level using wall brackets with 40 mm long CP brass screws including making the wall to it's original condition and moulding of edges of glass etc. all as per specification & as directed by Engineer in Charge.

Providing & fixing on Exposed or concealed surfaces the following dia Chlorinated Polyvinyl Chloride (C-PVC) pipe of specified class of M/s. SUPREME / PRINCE/ M/s. Jain Irrigation/M/s. Ajay pipes or other approved equivalent consisting following items of work:- i) Supplying & fixing C-PVC pipes, including necessary all fittings conforming to IS 15778 ii) Laying and fixing the pipe and specials on exposed surfaces to correct line, level and plumb for water supply line, overflow and vent using M.S. nails/screws, rawl plugs, wooden gutties and branded clamps of Supreme/Prince make to the pipeline as per the site requirement. iii) Testing the pipe line to a hydraulic pressure as per manufacturers cataglouge for leak proof joint or as per relavant code iv) Making leak proof threaded / solvent joints. including cutting the pipe, Joint preparartion, cleaning, marking, application of solvent, assembling, curing etc. and the cost of jointing cement solvent materials. v) Cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition. proof joints. vi) Providing and fixing C-PVC jointable / threaded fittings such as Union, Nipples, Bendes, Elbows, Tees, Reducers, End caps, Couplers, Adaptors, Saddles, Plugs, Tank connectors, Expansion loops, Bypass bends, etc vii) including removing existing GI pipe line with fittings and specials etc. SDR 11 Pipes and Fittings

Providing & fixing Chlorinated Polyvinyl Chloride (C-PVC) ball valve of 25 mm dia of class SDR 11 of M/s. SUPREME / M/s. PRINCE / M/s. Jain Irrigation / M/s. Ajay or other approved equivalent including all necessary fittings, fixing to correct line, level, plumb for water supply line, making leak proof solvent joints, including cost of all jointing solvent materials and testing to a hydraulic pressure for leak proof joint etc all complete all as per specifications and as directed by the Engineer in Charge.

Providing G.I. pipe Spouts at any level inside and outside of building for water drain outlet in various location wherever required including making hole, providing various dia. G.I. Pipe with required length, packing the hole with ready mix plaster material 1:4 / concrete as per required grade to close extra opened portion during making hole restore the surface to its original finishes etc. complete all as per directed by Engineer-In-Charge.

Providing chemical based water proofing of M/s Indofil chemicals / New coat of Dr. Fixit as approved over bath / WC brick bat coba & other locations as per the following procedure: a) Applying a coat of Indofil MC-76 mixed with clean water in 1:4 ratio i.e., one part of MC-76 and four parts of clean water over the entire area to be treated including filling of cracks, if any with CM-1:3 (Using factory made Ready Mix Mortar only) with waterproofing compound. b) Applying a coat of cement bond coat with MC-76 mixed with cement in 1:1 ratio i.e., 1 part of MC-76 and 1 part of cement. c) Providing and spreading of polycon based fibrous waterproofing net for entire area of Toilet/Bath including lapping as per manufacturer's specifications immediately after applying bond coat and curing. d) Applying one more bond coat with MC-76 mixed with cement in 1:1 ratio i.e., 1 part of MC-76 and 1 part of cement over the polycon based net. e) Applying two coats of flex top coats with indofil flexcoat mixed with 85 parts indofil flex coat and 15 parts clean water or applying two coats of Dr.fixit New coat without dilution.

Providing and filling Brick bat (40-60 mm) with cement mortar mixed in ratio 1:3:6 (1 cement : 3 sand : 6 brick bats) including mixing of water proofing compound @ 2 % by weight of cement to sunk portions of toilets, kitchen projection, terraces depressed areas at all levels , locations, heights and lead etc., complete to the entire satisfaction of the EIC. Further surfaces shall be screeded with (1:1.5:3) cement concrete mix with approved waterproofing compound @ 2 % by weight of cement about 20-30mm thick and finished smooth or ready to receive finish material as specified.

Providing & fixing G.I. Pipes 'C' class Providing, laying, jointing, fixing & painting heavy quality (Class 'C') M.S. Galvanized pipes as per I.S. 1239-1968 including fittings like elbows, collars, tees, unions, couplings, reducers, enlargers, bends and all other fittings required for the completion except screwed flanges conforming to I.S. 1239-1968 & also as per the code of practice of water supply in bldgs. Of I.S. 2065-1972 including laying under floors, chasing, in walls, roof slabs and making good the same to the original conditions, including the cost of all jointing materials like hemp yarn, white or red lead, clamps, wooden gutties, screws, cement, sand etc. including painting the pipe with coats of synthetic enamel paint over a coat of Primer & wrapping hessian cloth in concealed portion including removing the old damaged G.I. Pipes & handing over to Deptt. Stores, scaffolding, testing the pipes etc. complete all as per specification and as directions of the Engineer in Charge.

15mm dia.

20mm dia.

25mm dia.

32mm dia.

40mm dia.

50mm dia.

65mm dia.

Providing and fixing in position heavy pattern screw down gun metal Gate Valve conforming to I.S 778 with hand wheels at top including testing for 10 Kg./Sq.cm. Pressure with clean and potable water with a minimum testing duration of two hours etc. including removing gun metal Gate vale & returning to Dept. Stores etc. as per specifications and as directed by the Engineer in Charge.

25 mm dia.

32 mm dia.

40 mm dia.

50 mm dia.

65 mm dia.

Supplying and fixing following size uPVC UV-Stabilised soil / waste quality pipes and fittings for soil, waste, vent, antisyphonege, HVAC waste pipe and rain water pipe lines consisting following items of work:- i) Providing and fixing uPVC UV-Stabilised Soil / waste pipe as per IS:13592 and IS:14735 Grade-B laid in floor & on Exposed faces of wall of Supreme make or equivalent ii) Fixing the pipeline vertically by Metal clamps with rubber seal of Supreme make Cat. No. SWRMCR 1 to 6. iii) Providing and fixing uPVC cowl at the top of soil, waste water & vent pipe line. iv) Laying the pipe below floor/ground to proper slope and gradient for making connections of soil pipe line with inspection chamber or Manhole, waste water connection with Gully trap Chamber including the cost of cement mortar, cement concrete,water proofing compound etc. v) Jointing the pipe with Solvent Cement & Rubber ring gasket with making holes in walls / floor grooving and redoing the same and brick support etc. Giving water-tightness test for the pipes laid as per codal provisions. Providing Ring Joint pipes at verticals and solvent cement jointed pipes at consealed locations. vi) Necessary cutting to the required length including short pieces, fittings with & without door, assorted fittings such as plugs, tees, couplers, reducers, cross tees, reducing tees, elbows, bends, cleaning pipe, single & double Y, vent cowl, WC connectors, offsets etc. vii) Dewatering the pit / trench if necessary, till completion of work. For Soil & waste pipe lines

50 mm dia.

75 mm dia.

110 mm dia.

160 mm dia.

Supplying,fixing & concealing on walls / beams /columns etc. 32mm dia OD uPVC Pipes & Fittings of specified class consisting following items of work:- i) Supplying uPVC pipes conforming to IS 4985 and uPVC moulded plain / threaded fittings conforming to IS 7834 for waste water pipe line of SUPREME' make with ISI mark as per relevant standards ii) Laying and concealing the pipe and specials for waste water by cutting / making 75 mm X 75 mm grove on the wall, fixing the pipe using metal straps wherever required and filling the grove with cement mortar mixed with water proofing compound, after laying and testing the pipe line including making leak proof joints using cement solvent / Teflon tape ( For threaded fittings) of approved make, cutting the pipe to required length, preperation of surface, necessary tools etc. all complete. iii) Cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab,chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition. iv) Cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab,chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition. For Urinal/wash basin/ Sink waste. (10kg Pressure)

Providing & fixing uPVC Multi Floor Trap / Nahani Trap 110mm x 75mm x 50mm size of Supreme make or equivalant Cat No. SWRMFT 1 to 3 size having not less than 40mm effective water seal fixing the trap in position and connecting with waste water pipe by cement solvent / as per manufacturer's recommandation, embedding the trap in cement concrete 1:2:3 to correct level and gradient, providing and fixing 110mm x 110 mm size top tile with central strainer / flush strainer, closing the side inletes with plugs if required etc. all complete as per specification and as directed by Engineer-in-Charge.

Providing & fixing 450mm x 450 mm size HDPE sheet Flashing fabricated from 8mm HDPE flexible sheet and PN 6 grade 160mm dia HDPE pipe fabricated by welding with 160 / 110 mm dia HDPE pipe about 300mm long for PVC rain water pipes, fixing with cement mortar 1:2 mixed with water proofing compound and forming the proper shape and grade and finishing with inlet mouth of rain water pipe, cutting RCC slab or wall if required,including the cost of bitumen, cement mortar etc. all complete as specified and as directed by the Engineer-in-charge.

Providing & fixing precast EVERLAST Composite Manhole covers as per approved by BMC / E.I.C tested as per IS 1726. with engraved name of department and year as specified/approved, including cost of necessary hardware, 1:2:4 grade concrete for fixing frame, bed block (bearing course) and capping including necessary form work and CM 1:2 mortar for fixing the frame & for plastering exposed surfaces of concrete bed block (bearing course) and capping finished smooth with floating coat of neat cement etc., complete as per specifications, drawings and as directed by the Engineer-in-Charge.

Rectangular Heavy duty (Grade HD - 20 designation as per IS:1726) frame and cover size 910mm x 450mm

Description of Work / Item(s)

Amount

Part III - Development & Waterproofing Work

Providing and laying 230/150mm consolidated thickness dry rubble stone hard core soling of following consolidated thickness in sub base to floor and in plinth protection to required levels and lines with first quality rubble, hand set, well packed including filling the interstices with smaller stone chips, supplying & finishing/ blinding the surfaces with approved blinding quality aggregate , including dressing and leveling existing surface with cutting and filling upto depth 30cm as per level requirement, watering, consolidation etc. complete as per Specifications drawings & as directed by Engineer- in- Charge.

230mm thick

150mm thick

Dismantling carefully the existing stone masonary / RCC / PCC along with finishing by chiselling without damaging existing structure including cutting the reinforcement etc. depositing the serviceable material at departmental store and disposing off debris outside colony etc complete all as directed by the Engineer-in-Charge..

PCC / RCC Work

Stone masonary

Plain cement concrete using graded stone aggregate of 20mm max. size including consolidation, finishing, curing, cost of form work, shuttering, centering etc. complete all as per specification & as directed by the Engineer-in-Charge.

Reinforcement for RCC work including supplying, delivering, storing of various diameters as required at site of work including loading, unloading, transporting, decoiling, straightening, cutting, bending, placing in position at all locations & levels and binding with 18 gauge, soft drawn annealed steel binding wire including carrying out various tests as required etc. all as per specifications,drawings & as directed by the Engineer-in-Charge.

Thermo Mechanically Treated bars of grade Fe-500 D manufactured by SAIL, TATA STEEL and RINL only.

Reinforced Cement Concrete of following grade in foundation and plinth at all levels and locations conforming to I.S. 456-2000 using 20mm. maximum size down graded stone aggregate including machine mixing, conveying, placing in position, mechanical consolidation, finishing, curing etc. all complete as per specifications and drawings and as directed by the Engineer-in-Charge.

M-30 For all type of Structural / RCC Elements

M20 For floor

Extra for providing RMC (Ready Mixed Concrete) confirming to IS : 4926 (latest) in lieu of conventional RCC and PCC items supplied by approved RMC manufactures for all type of structural elements/ RCC elements and Misc works including transporting, pumping /manually etc. complete as per instruction of theEngineer-in-Charge.

Providing, erecting, fixing in position striking/removing and cleaning steel / timber shuttering & centering for formwork in foundation plinth at all levels and locations for all geometrical shapes in plain, curved surfaces of structural/RCC elements including chamfers, splays, keys, wedges, props, rails, bracings, brackets, cutting holes for pipes etc., providing & applying approved form oil on all surfaces of form work coming in contact with concrete including close hacking of all exposed concrete work after removal of form work, all materials, labour etc. all complete as per specifications, drawings and as directed by the Engineer-in-Charge.

Brick masonry in sub structure / super structure at all floors and locations using well burnt bricks / fly ash bricks of approved quality, make in CM 1:4 (Using factory made Ready Mix Mortar only) to correct line, level and plumb including raking out joints, curing, scaffolding etc, complete as per specifications and as directed by the Engineer-in-Charge.

In Sub-Structure upto plinth level

In Super-Structure above plinth level

Providing and fixing structural steel using angles, flat,plate, pipes etc. for grills, fencing etc. at all levels and locations as per existing design and pattern as required at site, embedding inside masonry/concrete wall, cutting of reinforcement if any, including painting structural steel with two coats of synthetic enamel paint of approved shade and make and one coat of approved steel primer, scaffolding, fabrication, welding etc complete all as per specification and as directed by the Engineer-in-Charge..

Providing and fixing in position G.I. chain link fencing 8 guage mesh of size 50 mm x 50 mm to the M.S. post on the top of compound wall including nuts, washers, and 6 mm dia fixing rods, including cost of materials, labour, scaffolding and painting with two coats of synthetic enamel paint of approved make & shade over a coat of approved metal primer etc. complete all as per specifications and as directed by the Engineer-in-Charge.

Providing and fixing 0.5 mm thickness corrugated galvalume sheet for roofing system (M/s. JSW or approved equivalent make) for sloped roof/ curved roof of any geometrical shape, ridge, facia, fins, projections and gutters etc., at all levels and locations with overlaps and neccesary ridges, fixing the sheet with self tapping SS Screws fixed with machine over new frame / existing frame including correction/addition in structural member in old frame as per required etc. all complete as per specifications and as directed by Engineer-in-Charge. (new structural steel shall be paid in relavent item)

Providing and fixing 60 mm thick (min) factory made interlocking paver blocks (grade of cement concrete M- 30) of approved colour, shade, size, shape of glossy / matt finish including supplying & laying 50 mm thick stone dust evenly spread over the sub base including consolidation of sub base, properly vibrating with the surface vibrater, finishing to line, level and slope, finally filling the joints with fine clean sand and cleaning the surface etc complete all as per specifications and as directed by the Engineer-in-Charge.

Providing and fixing precast cement concrete 1:2:4 kerb stones of size 125 mm wide and 375/250 mm deep curved at inner edge of 25 mm radius including necessary form work, compaction, finishing, curing, fixing with CM 1:4 (Using factory made Ready Mix Mortar only) , jointing and pointing in cement mortar 1:4 (Using factory made Ready Mix Mortar only) including earth work and 75 mm thick & 200 mm wide PCC 1:4:8 for foundation below kerb stone etc. complete all as per specification and as directed by the Engineer-in-Charge..

125mm wide 375mm deep

125mm wide 250mm deep

Random rubble masonry in foundation and superstructure using spotless black trap or approved locally available stone in cement mortar 1:4 (Using factory made Ready Mix Mortar only) including raking out joints, simultaneous flush pointing using through bond stones at every 900 mm in horizontal & vertical courses of each layer, including PVC pipe 50mm dia weep hole at 1.5m c/c in horizontal & in vertical, curing etc. complete all as per specification, directed by the Engineer-in-Charge.

Providing and fixing coloured paving chequered cement tiles of 30 mm thick of size 300mm x 300mm of M/s.Super Tiles (Super precast and Infrastructure) or equivalent approved manufacturers as per approved finish,design,pattern,shade for flooring and dado/skirting laid over concrete parking or footpath in 20 mm thick c.m. bedding in respect of flooring and fixed over 12 mm thick backing cement mortar 1:4 (Using factory made Ready Mix Mortar only) jointed with cement slurry & grouted with pigment of matching shade including filling the joints etc, complete all as directed by Engineer-in-Charge.

In flooring with 300 X 300 X 30mm or as specified

b)In dado / Skirting Tiles of size as specified in 30 mm thick

c)In flooring with 300 X 300 X 30mm or as specified

d)In dado / Skirting Tiles of size as specified in 30 mm thick

Cement pointing to stone work with cement mortar 1:4 (Using factory made Ready Mix Mortar only) , including raking out joints, pointing neatly and finishing the joints as specified below including curing, scaffolding etc. complete all as directed by the Engineer-in-Charge.

Raised and cut pointing.

Removing and refixing existing interlocking paver blocks including supplying & laying 50 mm thick stone dust evenly spread over the sub base including consolidation of sub base, properly vibrating with the surface vibrator, finishing to line, level and slope, finally filling the joints with fine clean sand and cleaning the surface etc complete all as per specifications and as directed by the Engineer in charge.

Removing and refixing precast cement concrete kerb stones of size 125 mm wide and 375/250 mm deep curved at inner edge of 25 mm radius including necessary form work, compaction, finishing, curing, fixing with CM 1:4 (Using factory made Ready Mix Mortar only) , jointing and pointing in cement mortar 1:4 (Using factory made Ready Mix Mortar only) including earth work and 75 mm thick & 200 mm wide PCC 1:4:8 for foundation below kerb stone etc. complete all as per specification and as directed by the Engineer-in-Charge..

Providing 15mm thick Ready Mixed Plaster (RMP) of approved make for internal / external faces of brickwork/ concrete/ RRM Wall, cable pits, trenches, chambers, steps etc. surfaces for all walls and beams flush with walls, mullions etc. including preparation of the surface even and smooth to correctline, level, plain & plumb including one coat of cement paste for smooth surface for water flow, rounding if necessary at all lead and locations on slope, plain & curved surfaces, curing, cleaning, scaffolding, complete all as per specifications and as directed at site by theEngineer-in-Charge..

Providing chemical based water proofing of NEWCOAT of M/s Pidililte, Indofil chemicals UV resistant of approved colour over terrace and parapet as per the following procedure: Chemical properties: PH Value : 9 ( min.) Sp. Gravity : 1.035 Active solid content : 47%/mass (min) Viscosity : 17 sec (by Ford cup B-4 method) UV Resistant : Contineous 200 hr (min) a) Cleaning the terrace completely with high presure water jet pump (100 Kg./sq.cm.) cleaning to remove all dirt with wire metal brush. b) Applying a coat of Indofil MC-76 mixed with clean water in 1:4 ratio i.e., one part of MC-76 and four parts of clean water over the entire area to be treated including filling of cracks, if any with CM-1:3 (ready mix factory manufatured cement mortar) with waterproofing compound. c) Applying a coat of cement bond coat with MC-76 mixed with cement in 1:1 ratio i.e., 1 part of MC-76 and 1 part of cement. d) Providing and spreading of polycon based fibrous waterproofing net for entire area of terrace including lapping as per manufacturer's specifications immediately after applying bond coat and curing. e) Applying one more bond coat with MC-76 mixed with cement in 1:1 ratio i.e., 1 part of MC-76 and 1 part of cement over the polycon based net. f) Applying two coats of flex top coats with indofil flexcoat mixed with 85 parts indofil flex coat and 15 parts clen water.

a) Over terrace slab, parapet including removing the existing damaged thermolay membrane and cleaning with kerosine/ thinner/ scubbing with machine etc., disposing off debris out side colony and cleaning complete.

Providing and laying integral cement based water proofing treatment of the agency approved by Department in patches, including cleaning and preparing surface by exposing the concrete, removing latencies, filling up inherent holes, voids, honey-combs etc.,in the concrete slab as required for treatment of roofs, balconies, terraces etc setting brickbat coba in waterproof mortar with necessary gradient for easy flow of water and continuing the treatment along the inner faces of parapet or othe adjoining wall at all level, heights and lead.consisting of following operations. As per IS :2645 :2003, With average thickness of 110mm and minimum thickness at drain point as 65 mm. including dismentaling existing waterproofing treatment upto RCC surface with consealed fitting curing and removing and lowering the debris obtained from the terrace level to ground and disposing the same all as directed by the EIC as per the following : -

Providing 6mm thick EPDM rubber flooring over 24mm of Rubber crumps of M/s. Arihant Industries corporation Liited or other approved equivalent including surface preparation, if required in design, pattern as directed by Engineer-in-Charge

Providing and fixing 40 mm thick puff type sheet for roofing system (M/s. JSW or approved equivalent make) for sloped roof/curved roof of any geometrical shape, ridge, facia, fins projections and gutters etc., at all levels and locations with overlaps and necessary ridges, fixing the sheet with self tapping SS screws fixed with machine over new frame/existing frame including correction/ addition in structural member in old frame as per required etc. all complete as per specifications and as directed by Engineerr-in-Charge.( new structural steel shall be paid in relavent item)

Description of Work / Item(s)

Amount

Part IV - External Repair and painting

Providing and erecting double bamboo scaffolding using minimum 50 to 75mm dia best quality bamboos tied with coir rope and the horizontal and vertical members of the bamboos to be provided as required at spacing's of not more than 900mm apart both horizontally and vertically including providing cross supports as struts to the scaffolding properly to the building for maintenance/ repair works of external surfaces of buildings as and when required including providing necessary safety belt and helmet to the workers, dismantling the scaffolding and taking back the scaffolding, safety belt and helmet after the repair works are completed including cost of transportation, labours, bamboos, wireropes etc. All complete as per specifications and directed by the Engineer-in-Charge..

a)Double bamboo scaffolding

Repairs to damaged RCC structural members at all locations/ floors using polymer modified cementatious mortar, for strengthening the existing RCC structural members using polymer (Dept. supply at fixed rate) and comprising the following operations: i) Breaking cracked / spalled concrete members along the cracks with plaster, including removing and stacking of all unserviceable material at site, simultaneous transportation and disposal of debris outside colony etc. complete all as per specifications and as directed by the Engineer-in Charge. ii) Exposing and cleaning the reinforcement thoroughly by light tapping / wire brushing of using strong emery paper and finally by acetone /rust remover of Dr. Fixit / Anuvi chemicals / Fosroc or other equivalent. iii) Applying a coat of polymer and cement slurry in the ratio 1:1 by volume to the reinforcement bars.

Building up with polymer modified cementatious mortar for RCC structural members etc. in layers not exceeding 20 mm in a day (proportion – cement 50 Kg. : Silica sand 125 Kg. : polymer liquid 10 litres.) with necessary bond coat (polymer : Cement = 1:1 by volume) for tack coat and also for subsequent layers using polymer including curing, covering the flooring /window with tarpaulins or equivalent covering material to avoid deposition of polymer mortar and cleaning of floor / windows thoroughly on completion of repair work etc. complete all as per specifications and as directed by the Engineer-in-Charge.

Repairing with polymer bonded mortar up to 35mm thick in layers of not exceeding 20mm (with out chicken mesh) in a day (proportion- cement 50 Kg : silica sand 125 Kg) with applying protection coat / bond coat to reinforcement, bond coat to old concrete and bond coat for every successive layers of 20mm thick in proportion polymer : Cement-1:1 by volume as per specification including covering the floor/windows with tarpaulin or equivalent covering material etc., and cleaning after repair etc., complete all as per specifications and as directed by the Engineer in charge.

Repairing with polymer bonded mortar of thickness more than 35 mm up to 70 mm thick in layers not exceeding 20 mm in a day (proportion – cement 50 kg : silica sand 125 Kg. ) with applying protection coat / bond coat to reinforcement and bond coat for every successive layers of 20 mm thick in proportion Polymer : cement – 1:1 by volume as per specification including providing and fixing by nailing @ 300 c/c one layer of Chicken wire mesh 22 gauge, including covering the floor / windows with tarpaulin or equivalent covering material etc. and cleaning after repairs, curing etc. complete all as per specifications and as directed by the Engineer-in-Charge.

Jacketing and strengthening of R.C.C column with free flow self compacting micro concrete made with Roff concrete Repair (Super flow micro concrete) manufactured by M/S. Roff construction chemical, (or) Renderoc RG manufactured by M/s. Fosroc chemicals (India) limited (or) ESSEN construction chemical or other approved equivalent make, which consist of dismantling loose concrete along with plaster, cleaning the reinforcement thoroughly with wire brush and finally with acetone, making micro concrete by mixing prepacked dry micro concrete and water in proportion as prescribed by the manufacture, mixing them thoroughly for 5 minutes for achieving free flow state of micro concrete, pouring the micro concrete in layers, compacting the concrete by blowing strokes with 16mm steel rod curing for 10 days (curing shall be commenced immediately after 4 hours of pouring concrete) etc. including providing shuttering and disposal of debris outside colony etc. complete all as per specifications and as directed by the Engineer-in-Charge.

Reinforcement for reinforced cement concrete conforming to IS at all floors & levels including, supplying, cutting, bending, fixing and tying in position with 1.6 mm dia soft drawn annealed binding wire including cost of binding wire, labour etc. complete all as per specifications and as directed by the Engineer-in-Charge.

a)With high yield strength deformed bars Fe 500 D grade

Sand faced cement plaster 20 mm thick in CM 1:4, two coats using factory manufactured pre mix/ready mix of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Build Well ready mix plaster ' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd / Readymade polymerised Dry mix Plaster - Silicoplast of M/s. Precise Conchem Pvt. Ltd.or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over exterior masonry and concrete surfaces with base coat of 12 mm thick and finishing coat of 8 mm thick final rendering, including using richer mix for making corners if necessary and making nosing in plaster wherever required, at all floors and levels, including making grooves of existing size wherever required, including cleaning the surfaces, including membrane curing by applying one coat brush, roller or spray using acrylic based curing compound i.e. Resikure of M/s Anuvi Chemicals/ Concure Of M/s. FOSROC or other equivalent ( as per manufacturer's specification ) including removing existing damaged/ worn out plastering and disposing off debris outside colony etc. complete all as per specifications & as directed by the EIC.

Rough cast cement plaster 25 mm thick in two coats, for base coat in CM 1:4 using factory manufactured pre mix/ready mix of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Build Well ready mix plaster ' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd / Readymade polymerised Drymix Plaster - Silicoplast of M/s. Precise Conchem Pvt. Ltd. or other approved equivalent make,having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechnical mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied over exterior masonry and concrete surfaces at all floors & levels for base coat in 1:4, 12mm thick and finishing coat of 13 mm thick with cement and gravel in proportion of 1:3, including cleaning the surfaces, including membrane curing by applying one coat brush, roller or spray using acryalic based curing compound i.e. Resikure of M/s Anuvi Chemicals/ Concure Of M/s FOSROC or other equvalent ( as per manufacturer's specification ), including making grooves of existing size wherever required, including removing existing damaged /worm out plastering and disposing off debris outside colony etc. complete all as per specifications & as directed by the EIC

Cement plastering using factory manufactured pre mix/ready mix mortar in CM 1:4 of pre mix/ready mix of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Build Well ready mix plaster ' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd / Readymade polymerised Drymix Plaster - Silicoplast of M/s. Precise Conchem Pvt. Ltd. or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechnical mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied on internal wall and ceiling finished smooth with neeru over brick walls or concrete surfaces at all floors and levels, including curing and removing existing damaged/ worn out plastering and disposing off debris out side colony etc. complete all as per specifications and as directed by Engineer-in-Charge.

a) 12 mm thick

b) 15 mm thick.

Providing and applying one coat of base primer (Apex Ultima protect of M/s. Asian paints or Aquatech of M/s. ICI Dulux or equivalent) and two top coats of acrylic water proof exterior coating of Apex Ultima Protek of M/s. Asian Paints / Weathershield flexx rainproof system of M/s. ICI Dulux or other approved equivalent make and shade over the sand face / form finished surfaces / rough cast plaster at all locations as required, thoroughly mixed and applied at an interval of 6-8 hours for each successive coats and ensure consumption of 0.47 ltr/Sqm for 3 coats,(base coat @.29 Ltr/sqm & two top coats @0.18 Ltr/sqm ) for sand face surfaces including preparation of surface, cleaning and filling the cracks and crevices with Latex caulking crack filler etc. Complete generally as per the manufacturer's specification and as directed by the Engineer-in-Charge.

Over sand faced plastered / Form finished surfaces

Over rough cast plastered surfaces

Over sand faced plastered/form finished surfaces with one coat paint

Repainting of old painted surfaces with two coats synthetic oil bound distemper of approved shade and make over one coat of approved cement primer, including thoroughly scrapping, removal of old paint if any, sand papering & preparing the surfaces, applying approved stucco putty to entire surface to fill up crevices mild depression etc. scaffolding including cleaning of floors, doors & windows etc.& disposing of debris outside colony etc. all as per specifications and as directed by the Engineer-in-Charge.

Repainting of old painted surfaces with two coats of acrylic emulsion paint of approved make & shade, applying a coat of approved cement primer, filling up the cracks with approved crack filling compound , applying approved stucco putty to entire surface to fill up crevices, mild depression etc. thoroughly scrapping the surface, applying 2nd coat of approved cement primer carrying out full stucco putty work , apply two coats of acrylic emulsion paint including necessary covering material and removal of splashing & droppings from floors, walls including scaffolding, ladder as required & disposing of debris outside colony etc. complete allas directed by the Engineer-in-Charge.

Painting old steel/wood work with two coats of synthetic enamel paint of approved shade and make over one coat of primer including preparing surfaces, filling with putty wherever required and cleaning etc. complete all as per specifications and as directed by the EIC.

On wooden surfaces with two finishing coat over a coat of praimer.

On steel surfaces with two finishing coats over a coat of praimer.

Plain cement concrete 1:2:4 using graded stone aggregate of 20mm max. size at all floors, levels and locations including machine mixing, laying, consolidation, finishing, curing, etc. complete all as per specifications and as directed by the Engineer-in-Charge.

Pressure grouting through RCC wall by drilling holes in RCC to required depth without causing any damages to reinforcement, inserting 1/2'' dia PVC pipe in hole securing the sides of the hole with cement mortar 1:2, pressure grouting with a mix of Cement slurry with 225 gm Dr. Fixit pidicrete AM or equivalent per 50 kg cement bag with W:C ratio 0.3 to 0.45 and pressure as per site requirement depend on member thickess. Continuing the pressure grouting till the flow of cement slurry stops, removing the PVC pipe, sealing the hole with Polymer modified mortar etc. ensure curing by applying curing compound etc. Complete all as per specification and directed by Engineer-in-Charge.

Brick work in super structure at all floor and levels in cement mortar 1:6 using well burnt locally available bricks of approved quality including scaffolding, racking out joints, curing, scaffolding etc. complete all as per specifications and as directed by the Engineer-in-Charge.

Providing & applying silicon selant in joints between sliding window frame and stone jamb of approved quality of M/s. Dr. fixit. or approved equivalent including labour for cleaning, filling, removing the excess sealant after application for width upto 5 mm x 5 mm depth etc. complete all as per manufacturer’s specifications. etc.complete all as directed by the Engineer-in-Charge.

Providing & applying polysulphide compound in expansion joints of approved quality of M/s. Chokesy chemicals /Sunanda special coatings or approved equivalent with primer including labour for mixing in required proportion of part ‘A’ & ‘B’ removing the excess sealant after application for width upto 25mm etc. complete all as per manufacturer’s specifications including dismantling the loose plaster and making good the same & filling up the gaps of Expansion joint with approved material (thermocol of high density or equivalent) followed by polysulphide compound of approved manufacturer or as specified including scaffolding etc.complete all as directed by the Engineer-in-Charge..

Description of Work / Item(s)

Amount

Part V : Rebated items : -

Rebate for Taking away dismantled item by the contractor

a) MS Windows made of Z Sections with glass

b) Teak wood frame

c) Panelled door shutters 32mm thick (approx)

d) CP Brass PH Items like bib tap, pillar cock stop cock, Towel rod, shower rose etc.

e) GI/CI pipe of various dia., grills, railing etc.

f) G M Valve up to 50mm

g) Scrap wood

Renjin Construction

Sai Sales Corporation

ANUBHAV ENGINEERING COMPANY

K Rajesh and Company

ANS Constructions.com

KALPANA STRUCT CON PVT LTD

Renjin Construction

Sai Sales Corporation

ANUBHAV ENGINEERING COMPANY

K Rajesh and Company

ANS Constructions.com

KALPANA STRUCT CON PVT LTD

Sai Sales Corporation

SURENDRA SINGH RATHORE

K Rajesh and Company

KALPANA STRUCT CON PVT LTD

ANUBHAV ENGINEERING COMPANY

ANS Constructions.com

Renjin Construction

ANUBHAV ENGINEERING COMPANY

K Rajesh and Company

Sai Sales Corporation

ANS Constructions.com

KALPANA STRUCT CON PVT LTD

ANUBHAV ENGINEERING COMPANY

SURENDRA SINGH RATHORE

Sai Sales Corporation

K Rajesh and Company

KALPANA STRUCT CON PVT LTD

ANS Constructions.com

Renjin Construction

Sai Sales Corporation

ANS Constructions.com

SURENDRA SINGH RATHORE

K Rajesh and Company

KALPANA STRUCT CON PVT LTD