(i) Provision of maintenance facilities for NMG coaches at ADLW. (ii) Extension of Wagon repair shop(WRB-II) for augmentation of Berthing capacity for wagons and Provision of centralized store for air brake section in Loco workshop, Ajmer.

2-Assemble, fixing, hanging & connection of ceiling fans, exhaust fan,

Assemble, fixing, hanging & connection of ceiling fans, exhaust fan, fittings as per specification.

4-Supply, install, test & commissioning of 20 Amps. Ray Roll Plug

Supply, install, test & commissioning of 20 Amps. Ray Roll Plug socket single phase with 25 Amps RCBO 30mA. including connection / wiring as per specification

5-Supply, install, test & commissioning of RCBO 25 Amp DP,30 MA

Supply, install, test & commissioning of RCBO 25 Amp DP,30 MA with earth leakage, Over load and short circuit protection as per specification

6-Supply, Installation of metal Double pole enclosure with provision

Supply, Installation of metal Double pole enclosure with provision to mounting arrangement of MCB/Isolator/RCCB/RCBO and other modular devices as per specification .

7-Supply, installation, testing & commissioning of 3 pin with neutral &

Supply, installation, testing & commissioning of 3 pin with neutral & earth plug socket box type, 32 Amp. Capacity with 32 Amp TPN MCB along with wiring & connection

8-Supply of material, installation, testing and commissioning of

Supply of material, installation, testing and commissioning of wall/ceiling/corner mounted along with a WPC approved frequency which is non open to all other devices,passive infrared sensor with XCT technology to detect minor motions as per specification.

9-Supply and test 150 watt LED High Bay light complete with all

Supply and test 150 watt LED High Bay light complete with all accessories

10-Supply, fixing, testing & commissioning of Bracket Fan 400 mm

Supply, fixing, testing & commissioning of Bracket Fan 400 mm sweep complete with all accessories along with wiring as per specification

11-EARTH STATION

12-Supply, installation, testing & commissioning of heavy duty BLDC

Supply, installation, testing & commissioning of heavy duty BLDC Air circulator fan 600 12 mm sweep, 1300 RPM, WATT 120-140 , WALL mounting type should have speed adjustments, suitable to work on 200-260 V, delivery minimum of 500 CMM, Confirming to IS- 2997/1964 with two year warranty , Accepted make - Airzon, Havells, Bajaj, Atomberg or equivalent.

13-Laying, connecting, testing & commissioning of HT/LT cables

14-Supply, fixing, testing & commissioning of Suspension Bracket

Supply, fixing, testing & commissioning of Suspension Bracket with clamp for street light fitting with GI pipe as per specification.

15-Supply, fixing and commissioning LT heat shrinkable straight

Supply, fixing and commissioning LT heat shrinkable straight through joint as per specification.

16-Supply, drawing, testing & commissioning of 4 wire overhead

Supply, drawing, testing & commissioning of 4 wire overhead catenary with PVC insulated & unsheathed single core, FR grade multi strand copper wire 10 sq. mm and one GI wire of 8 16 S.W.G. for earthing in covering shed including binding jumpers on reel insulators provided on bracket. The bracket of MS flat 40x6 mm with MS rod for holding insulator anchored with nut, bolt, washers of suitable size to adjust reel/shackle insulators with sufficient capacity to run insulated wire & GI wire including clamps of MS flat for holding the bracket firmly, the insulator should be suitable for 1000 Volt.

17-Supply, fixing, testing & commissioning of 150 Kvar MPP type

Supply, fixing, testing & commissioning of 150 Kvar MPP type capacitor bank with automatic power factor correction panel.

18-Supply, installation, testing & commissioning of 6 Amp SP MCB 10

Supply, installation, testing & commissioning of 6 Amp SP MCB 10 KA, C curve with metal enclouser (As per specification.)