Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.1 LAccepted-AOC | L1 | Accepted-AOC Being a lowest bidder | |
| 2 | L2₹46.5 L+₹63,860 (1.39%)Rejected-Finance 02 JAMEEWAR COMPLEX RING ROAD HANUMAN NAGAR GONDIA MAHARASHTRA 441614 | GONDIA | MAHARASHTRA | 441614 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹47.2 L+₹1.3 L (2.93%)Rejected-Finance BAKRABAD BAMRAULI ALLAHABAD U P | ALLAHABAD | U P | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹49.3 L+₹3.4 L (7.52%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹49.8 L+₹3.9 L (8.57%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
25 Jan 2024, 6:00 pmClosed
GE (AF) Bamrauli
GE (AF) Bamrauli
REPAIR/MAINT OF COMPOND WALL, BOUNDARY WALL, SECURITY FENCING, HARD STANDING, PATH AND SEWAGE LINE INCLUDING OTHER ALLIED B/R WK AT AF STN BAMRAULI
2024_MES_636130_1
8860/E8
Open Tender
Civil Works - Others
Works
120 days
GE (AF) Bamrauli
Please refer Tender documents
7 documents required · 7 mandatory
₹500
GE (AF) Bamrauli
₹88,000
Yes
2 Mar 2024
6 Jan 2024
27 Jan 2024
6 Jan 2024
25 Jan 2024
20 Jan 2024
Amount
Cleaning of sewage lines of 100mm dia. by roding from manhole to manhole removing the materials obtained from sewage line including cleaning of manholes and flushing with clean water complete all as directed.
All as per srl item No.1 here-in-before but of 150mm dia
All as per srl item No.1 here-in-before but of 200mm dia
All as per srl item No.1 here-in-before but of 300mm dia
Cleaning of Gully traps of any size and of any depth by removing the material (sludge materials) and placing back the manhole cover in Position complete all as directed.
Cleaning of Septic tanks of 150 uesrs capacity by dewatering all the water, taking out the sludge/night soil, in order to remove all stacked mud/sludge etc., cleaning the chocked inlets, outlets of septic tanks, removing all the sludge outside MD land, complete all as directed.
Removing of blockage from 'S' trap/'P' trap/ Nahani trap/floor trap by flushing or by sucking by suction pumps at GF/Ist/IInd/ IIIrd floor including cleaning the line up to 1st manhole complete all as directed.
Clearing the urinal blockage of any length and dia by roding and removing the materials (sludge) to a distance not exceeding 500m all as directed.
Clearing of WC blockages up to 1st manhole of any length and dia by roding and removing the materials (sludge) to a distance not exceeding 500m complete all as directed.
Cutting into existing manholes for connecting new drains of internal dia of pipe 100mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round and 3/4 section) in cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) smooth finished and reforming benching as required complete all as directed.
All as per srl item No.10 here-in-before, but internal dia of pipe 150mm complete all as directed.
All as per srl item No.10 here-in-before, but internal dia of pipe 200mm complete all as directed.
Excavation in trenches n. exc 1.5m wide and n.exc 1.5m in depth and getting out in soft / loose soil complete all as directed.
All as per Sl item No.13 here-in-before but depth exc 1.5m and n.exc 3.0m complete all as directed.
Removal of excavated soil to a distance exc 250 m & n.exc 500 m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick using soil complete all as directed.
M & L for plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation of concrete, complete all as specified
M & L for plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping, benching etc including necessary form work complete all as specified
M & L for Brick work with sub class 'B' old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4) as in man holes or boundary wall etc, complete all as specified
M & L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as directed.
M&L for RCC NP3 pipe dia 100 mm bore laid and jointed with collars in cement mortar complete all as specified.
All as per srl item No.21 here-in-before but of 150mm dia
All as per srl item No.21 here-in-before but of 200mm dia
M&L for PCC 1:3:6 type C2 using (40mm graded stone agg) to drain pipes 100 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
M&L for PCC 1:3:6 type C2 using (40mm graded stone agg) to drain pipes 150 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
M&L for PCC 1:3:6 type C2 using (40mm graded stone agg) to drain pipes 200 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
S&F 150x150mm Salt-glazed stoneware gully traps, square or round mouthed, type 'P' including demolition of old/damaged gully trap complete all as directed.
M & L for TMT bars 8mm dia cut to length, bent to shape required including cranking, bending and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as directed.
M & L for pre-cast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate) as in cover slabs including necessary from work etc, set in CM 1:6 complete all as specified( form work shall be included in quoted rates), (reinforcemnt be measured and paid seperately)
M & L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) of 75mm thick as in Path / PCC floor, finished even and fair including demolishing old cement complete all as directed.
Dismantaling of Stone slabs and tiles laid bedded and pointed in any mortor or of any description or thickness in floors, aprons etc.
M&L for machine pressed precast concrete interlocking paver block of grey cement rubber moulded glossy finish and no pigment, any shape and size confirming to IS-15658-2006 of 80mm thickness, M-40 grade complete all as specified and directed.
M & L for 30 mm thick Sand filling under floor with approved sand including watering and consolidating complete
M&L for Chequered cement concrete tiles 20cmx20cmx25mm thick set and jointed in neat cement slurry including 15 mm thick screed in CM(1:6) and pointed in white or colour cement to match with grey cement and no pigment complete all as specified and directed.ected.
M & L for PCC (1:2:4) type B2 (using 40mm graded stone aggregate), 100mm thick, as in hard standing finished even and smooth without using extra cement including demolishing old concrete complete all as directed.
M&L 75 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection including making 10mm thick joints filled with bituminous & sand mixture (1:7) not exec 3.00 mt intervals, corners and finished even and smooth without using extra cement including demolishing old concrete complete all as directed.
Cleaning of Rain Water pipes and removing the materials (sludge) to a distance n exc 50m, complete all as directed.
M&L for Preparation of old painted brick/concrete/plaster surfaces of any description, over 10 Cm in width or grith,and applying one coat of synthetic enamel paint complete all as directed.
Taking down cement plaster of any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete and M & L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces, finished even and fair and smooth without using extra cement complete all as directed.
M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of cement wash with white cement complete all as specified
M & L for preparation of old decorated plastered/unplastered surface of walls and applying one coat of plastic emulsion paint complete all as specified and directed.
M & L for complete removal of existing treatment and applying 1.5 mm thick wall care putty with two coat plastic emulsion paint complete all as specified and directed.
M&L for preparation of old surfaces of wall any type applying two coat of exterior emulsion paint over 1.5 mm thick putty ,using Mechanical means complete all as specified and directed.
M&L for Preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and treating oil and greasy spots and applying one coat of weather proof paint (Exterior emulsion paint) Using Mechanical means complete all as specified and directed.
M&L for complete removal of existing treatment and preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and treating oil and greasy spots and applying two coat of weather proof paint (Exterior emulsion paint) Using Mechanical means complete all as specified and directed.
M&L for Preparation of old treated wooden surface of any description over 10 cm width or girth and applying one coat of synthetic varnish using Mechanical means complete all as specified
M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion with roller brush, white or tinted over & including alkali-resistant cement primer Using Mechanical means complete.
M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, applying two coats of distemper, oil emulsion white or tinted over and including one 2mm thick wall care putty Using Mechanical means complete.
M&L for preparing old decorated plastered or unplastered surfaces of walls and applying one coat of distemper oil emulsion, white or tinted Using Mechanical means complete.
Ditto asper item no 48 but on ceiling complete all as specified and directed.
M&L for preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint Using Mechanical means complete.
M&L for preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint Using Mechanical means complete.
S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain• ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165
S&F in repair concertina coil 1050 mm dia (in stretched position) hot dip galvanized steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dovetail clips (18 SWG) fixed over and including razaor wire, medium barb, hot dip galvanized steel wire razor wire with angle iron. The concertina coil to be fixed with razor wire at points wherever coil touches bottom of razor wire with the help of hog rings (14 SWG) including all fittings like fasteener clips,steel lug rings etc complete all as specified and directed. Note- (i) Stretch length of each coil shall be 6 mtr complete all as specified and directed.
Excavating in post holes (or similar holes) each not exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good surface, work in hard/dense soil complete all as specified
M & L for PCC 1:3:6 Type C-2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed by the Engineer-in-Charge.
S & F steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by the Engineer-in-Charge
M&L for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe -290 Gde E-165 complete all as specified
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire incl taking down old chain link fencing.
Supply only Chain link MS galvanisd fencing, any size or type
M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer on newly steel surfaces of any description over 10 cm in width or grith, not otherwise described including preparation of surfaces.
Dismantling posts or struts (Wood,steel or RCC) any section, incl taking out embedded in natural ground and making good disturbed ground.
Dismantling floor hearth or wall tilling including cement mortar bedding , removing serviceable tiles to stack and rubbish off the premises for minor repair to floor tiles/ nahani traps and repair to concealed stop cock and GI tubing in wall etc in patches. complete.
M&L for 7 to 8mm thick Non Skid ceramic tiles coloured (square/ rectagular) area of each tile exceeding 0.09 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:6) for lying floor finish etc complete.
M&L for Glazed ceramic coloured tiles in vertical surface 450x 350x7 mm thick tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing 10mm thick rendering in CM (1:4) complete etc complete all as specified.
Mild steel chromium plated grating 100 mm dia, fixed in repairs to Nahani traps complete.
Mild steel chromium plated grating 125 mm dia, fixed in repairs to Nahani traps complete.
Fixing only in repair wash down water closet any pattern making minor repair like changing washer complete all as specified and directed .
Supply and fixing in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, (excluding flushing cistern & flush pipe fixed including connection to trap and to flushing pipe,anti sphonage pipe etc.) making good the disturbed surfaces and to match with existing surface and taking out the existing pan complete.
Supply and fixing(in Repair) vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) and P or S trap including connection to drain (or outgoing pipe) and to flushing pipe anti-syphonage pipe etc complete all as specified and directed. including plastic water closetseat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device.
Supply and fixing(in Repair) Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified including plastic water closet seat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device.
Supply and fixed in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx35mmx730mm 'white' with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc all as specified in Particular specifications. Note : Vitreous china wash down water closet (Pedestal Pattern) cat Part No. CURATOR S1013132 S trap 250mm of 'Cera' or equivalent model of make specified in Appendix 'B' to particular specifications.
S&F in repair PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete.
Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.
M/S R S Traders
M/S KESRI WORKERS
K R GUPTA AND SONS
VIPUL CONSTRUCTIONS
chauhan construction
Mohit Enterprises
M/S SATISH KUMAR
Bharat Trading Company
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .