REPAIR/ MAINT OF OLD UNSV PERIMETER AND EXTERNAL LIGHT FITTINGS WITH LED LIGHTS AND MAINT OF JUNCTION BOXES, CABLING AND ALLIED WORK UNDER GE (W) JABALPUR

Amount

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth , for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, laying of cables etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified and as directed.

M/L for Removing excavated material to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

M/L for Returning , filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Supply, fixing and connecting in repair PVC insulated, round,sheathed, multicore, industrial flexible cable with bright annealed copper conductor, 1100 volts grade cable of size1.5sqmm, 3 core, confirming to IS 694-1990 complete all as specified and directed

Taking down old unsv light fitting of any size any type for repair and refixing of the same after necessary repair including removing of carbon, replacement & reconnection of wire, driver, module etc complete all as specified and directed. Note : 1. Material required for repair of light fitting shall measured and paid seperately under respective items.

Trimming of tree branches Clearing of LT/HT line 4 mtr all around by cutting tree branches at ground level of any numbers and any girth on any numbers of conductors/earth wire complete all as specified and directed by Engr- in- charge. Note FOR Item No. 5&6: 1. Contractoror shall provide 2x helper & 01xElectrician daily incl sunday & holiday along with vehicle, ladder, petrol operated branch/tree cutting machine, saftey belt, multimetre, rain coat etc to perform daily routine work. No additional payment shall be paid to the contractor in this regard. Above quoted rate shall be inclusive of this. 2. In case of non-providing above facilities, recovery of Rs 4000.00 per day will be rocovered from the RAR. 3. Max one time payment shall be given to the contrator at same location in three month if work carried out 1 or more times at same location in three month for item No 5 &6.

S&F the SPD for LED light singe phase (1P+N) 10 KA,complete all as specified & as directed.

Supply Only driver suitable for 45-70 Watt existing LED Street light fitting of Make (Philips, Bajaj, C&S, Wipro, havells, Luker, ) as required at site and directed by Engr in Charge. Make of driver :As per Existing.

Supply Only driver suitable for 90-200 Watt existing LED Street light fitting of Make (Philips, Bajaj, C&S, Wipro, havells, Luker, Surya etc ) as required at site and directed by Engr in Charge driver make of driver :As per Existing.

Taking down old unserviceable street light fittings HPSV of any capacity from pole / Wall / other similar situation and kept aside for schedule of credit complete all as specified and directed.

Supply and fixing energy saving and environmental friendly long life LED street light luminaires, min 5400 system Lumen out put with inbuilt battery backup of min 2 hr made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having bottom opening seperate driver compartment with IP66 protection and impact resistance of IK08. Make:Havells/bajaj/Philips/crompton/Orient, Hallonix cat part No. LED SL HLSLD-ML04-45/60-CWL-INV-DIMM-RTC-R

Supply and fixing energy saving and environmental friendly long life LED street light luminaires, min 6600 system Lumen out put max 60 watt made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having bottom opening seperate driver compartment with IP66 protection and impact resistance of IK08. Cat Part No ENDURASUNBEAMSL60WLED757SASYTOPC Make:Havells and equivalent Make of Philips/Bajaj /Orient/Crompton, Hallonix cat part No. LED SL HLSLD-ML04-60-CWL-INV-RTC-R

Supply and fixing energy saving and environmental friendly long life LED street light luminaires, min 7700 system Lumen out put , max70 watt, made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Top opening seperate driver compartment with IP66 protection and impact resistance of IK07. Cat Part No ENDURASUNBEAMSL70WLED757SASYTOPC Make: Havells and equivalent Make of Philips/Bajaj /Orient/Crompton, Hallonix cat part No. LED SL HLSLD-ML04-90-CWL-INV-RTC-R

Supply and fixing energy saving and environmental friendly long life LED street light luminaires, min 10300 system Lumen out put, max90 watt, made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Top opening seperate driver compartment with IP66 protection and impact resistance of IK07.Cat Part No ENDURASUNBEAMSL90WLED757SASYTOPC. Make - Havells and equivalent Make of Philips/Bajaj /Orient/Crompton, Hallonix cat part No. LED SL HLSLD-ML04-90-CWL-INV-RTC-R

Supply, fixing and connecting in repair LED street light fitting 100-120, min lumen output of system 11000 lumen having LED as light source, pressure die cast alluminium housing and lens embedded PC cover having IP-66 protection, IK07 with 10kV surge Built in Surge protection device, heat sink, operating voltage range 140-270 voltage, system efficay >100lm/W,CRI >70%, THD<10%, complete all as specified and directed by the Engr - in - charge. Make: ENDURAOMNIPLUSSL100WLED757SAS YTOPC of Havells or equivalent make of Philips Catpart No. BRP409 LED110 CW M2 FG PSU GR V3 or Bajaj Catpart No. ZELA P 120L WH PO TG SD or Hallonix HLSLD-06-100-CWL-R-HL2-P or equivalent in Crompton/Orient

Supply and fixing energy saving and environmental friendly long life LED Flood light luminaires, 400 watt WITH MIN 40000 system Lumen out put, warm white, exclusive innovative die cast aluminium IP66 LED Flood light suitable for highlighting architectural facade and general purpose lighting. Cat Part No JETVALOUFL400W3MLED757PINTN/WBLTG of Make - Havells and equivalent Make of Philips OR CROMPTON

Supply and fixing energy saving and environmental friendly long life LED Flood light luminaires, min 14400 system lumen output and max 120 watt, exclusive innovative die cast aluminium IP66 LED Flood light suitable for highlighting architectural facade and general purpose lighting. Cat Part No JETAIRISFL120WLED757APWBLTG of Make - Havells and equivalent Make of Philips Cat Part No BVP192 LED132 CW NB FG A1 GR PSU, Bajaj Cat Part No PRAZEF144LWHNB-A5 TG SD EQUIVALENT IN CROMPTON/HALLONIX/ORIENT

Supply, fixing, connecting and testing of Automatic Street light switch using infrared Sensor based Nature Switch for automatic switching of street lights, Nature switch operation should be based on Natural light lux level. Required illumination level for switching on is < 30 lux and for switching off > 10 lux. The sensor should also have part night operation facility for 4 - 12 hours. The sensor alongwith suitable power contactor, incoming-outgoing MCBs should be enclosed in a pole/wall moutaed enclosure made out of Rust proof, electric shock proof, termite proof and FR grade SMC junction box conforming to IP-54, The circuit should be suitable enough to take 8 kw single phase load with contactor 63 Amps conforming to IEC-60947-4-1/IS-13947-4-1 & incoming and outgoing MCBs of rating 63 Amps conforming to IEC-60898/IS-8828 and circuit wiring of minimum 16sqmm coper conductor wire in and including providing of 50x6mm flat iron clamp, necessary nuts and bolts complete incl taking down of existing arrangement all as specified and directed by the Engr-in-charge. Make of nature switch - Model No Swadeep-02EC8kw1P of Kakatiya Energy System or equivalent make of Bajaj/Healer, Make for Contactor- BCH/L&T/Schneider, Make of MCBs- Hager/Schneider/L&T/C&S, Enclouser - Sintax or equivalent

Dismantling/ taking down of existing street light switching system and Supply, fixing, connecting and testing of Automatic Street light switch using infrared Sensor based Nature Switch for automatic switching of street lights, Nature switch operation should be based on Natural light lux level. Required illumination level for switching on is < 30 lux and for switching off > 10 lux. The sensor should also have part night operation facility for 4 - 12 hours. The sensor alongwith suitable power contactor, incoming-outgoing MCBs should be enclosed in a pole/wall moutaed enclosure made out of Rust proof, electric shock proof, termite proof and FR grade SMC junction box conforming to IP-54, The circuit should be suitable enough to take 8 kw Three phase load with contactor 25 Amps conforming to IEC-60947-4-1/IS-13947-4-1 & incoming and outgoing MCBs of rating 32 Amps conforming to IEC-60898/IS-8828 and circuit wiring of minimum 10sqmm copper conductor wire in and including providing of 50x6mm flat iron clamp, necessary nuts and bolts, complete all as specified and directed by the Engr-in-charge. Make of nature switch - Model No Swadeep-02EC8kw3P of Kakatiya Energy System or equivalent make of Bajaj/Healer, Make for Contactor- BCH/L&T/Schneider, Make of MCBs- Hager/Schneider/L&T/C&S, Enclouser - Sintax or equivalent

Supply, laying or fixing or passing through pipe commissioning and testing of PVC XLPE insulated, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade, multi -stranded of SIZE 10SQMM 2 CORE including suitable size lugs including taking out /dismantling of existing cable. Note: Excavation & earth work, sand cushioning, bricks protection & GI pipe where required shall be measured & paid separately under relevant items.

Supply, laying or fixing or passing through pipe commissioning and testing of PVC XLPE insulated, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade, multi -stranded of SIZE 16SQMM 4 CORE including suitable size lugs including taking out /dismantling of existing cable. Note:- Excavation & earth work, sand cushioning, bricks protection & GI pipe where required shall be measured & paid separately under relevant items:-

Supply, laying or fixing or passing through pipe commissioning and testing of PVC XLPE insulated, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade, multi -stranded of SIZE 10 SQMM 4 CORE including suitable size lugs including taking out /dismantling of existing cable. Note:- Excavation & earth work, sand cushioning, bricks protection & GI pipe where required shall be measured & paid separately under relevant items.

Material and labour for painting to steel tubular pole/Rail Pole of HT/ LT over head line and all MS clamps, cross arm work on poles with one coat of superior aluminium paint including necessary preparation of surfaces and painting of alternate strip with black and white synthetic enamelled paint strip 05 Nos each of 30 cm height up to 1.5mtr above PCC benching/coping complete all as specified and directed by Engr in charge

Supply and fix junction box made out of polycarbonate with IP 55/IP 65 protection of size 200 x 160 x 98 mm, 5 way having terminals for termination of cable with necessary nuts and bolts ,Make - Hansal including -02 Nos polycarbonate cable gland Make :Hansal, 01 Nos DIN rail for mounting of MCB and 01 No, MCB SP, 10 KA, 6 Amps Make - Legrand in and including fixing clamp of FI 50 x 6mm with necessary nuts and bolts complete in and including taking down of existing u/s junction box of any type all as directed.

Supply, laying & fixing double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints, Sockets, Elbows, bends and End caps etc. all as specified and directed by Engr in Charge.of size 50 mm outer dia and 38 mm inner dia of Make;-Telerex/Tirupati/ Prince/ Supreme approved by GE

Taking down old unserviceable solar light light fitting of 20-45 W along with battery, panel box etc and refixing after necessary repair including replacement of battery as per exising size/type/specifications, wire, cleaning & removing of dust, repair/replacement of battery lux & cable etc complete all as specified and directed. NOTE: 1. Min 80 % of Material related to item No. 10 to 26 shall be provided by contractor within 40 days from date of commencement of work otherwise after 40 days recovery of Rs 1000.00 per day will be deducted from RAR. 2. For srl Item no. 11 to 16 Contrator shall provide 5 year replacement warranty cerificate alongwith cat part No. from company at the time of sample approval. without warranty certificate sample canot be approved.

RAVINDRA ELECTRICAL