Improvement and Green Space Development of Park, Childers play material and out door GYM Equpment at Kanamma Nagar Park

Amount

Wiring with 2x1.5sq.mm.PVC insulated SC unsheathed FRLS copper conduct or of 1100V grade insuitable PVC rigid pipe concealed in walland ceiling with PVC accessories inflush with wall with 150mm x100mm x113mm TW switch box with 3mm thick hylem sheet cover for 5A3 pin non interlocking wall socket with 5A flush type switch with continuous earth wire connection of 1.5sq.mm copper wire and making good of the concealed portion with suitable colour for concealed PVC plug point

Wiring with 3x1.5sq.mm.PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hyle msheet covered TW switch box and 5AFT switch (twoway) and making good of the concealed portion with suitable colour for concealed staircase light point

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1"x1/8"copperflat) on TW plank of size 375mm x300mm x19mm with supporting TW reepers of 1"thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1No 40Amp 30MA Double Pole RCD / RCCB (Higher End) with suitable necessary connection

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting with Ready Mixed Enamel Paint over the new wood works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement

Supplying and filling the basement with River Sand filling in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification.

Providing Stainless steel entrance name board 20 feet x 3 feet size board SS stand pipes from gl to 15 feet hight aluminium composit pannel leteer board and fixing in metal letters 12inches hight including cost and conveyance of all materials fabrication charges and all labour charges and foundation arrngements ec complete

Supplying and fixing of family Swing with shelter of 40mm dia GI pipes support as legs and top bar is 50mm dia. The seat is 9mm thick reinforced rubber with Antiskid chequred top with heavy ball bearing and the suspension is 7mm dia electro galvanized chain and the cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supplying and fixing of Spiral slide 12 feet for below 12 years old childrens to a length of 3.00 m with 80mm dia leaver and 40mm top bar with MS pipes. The seater is of moulded plastic. The ladder frme is made up of 25mm M.S. ppe., hanrail 20mm dia MS pipe and the centre support is 80mm dia MS pipes. The cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and delivery of FRB Solid waste bin 1 m hight Animal and Bird Models including cost and conveyance and all handling labour charges etc complete

Supply and fixing of Single Twister Sitting Twister- Outdoor Gym Equipment Maximum User Weight of 100 kilogram, Main Central Pipe & Main Frame Pipe of 100mm dia G.I. Pipe with 3.6mm Thickness Standing/ Sitting Twister Frame Pipe 32 mm G.I. Pipe 32 mm dia with 3.2mm Thickness, Disk Support Pipe at Bottom Pipe 80 mm dia G.I. Pipe, Rotating Disk Support, Handle Frame Pipe 32mm dia G.I. pipe Thickness with 3.2mm Thickness,Foundation Pipes 750mm deep GI pipe, supported with M.S. Angle 25 X 25 X4mm of Foundation Pipe 100mm with 3.6mm Thickness,Ball Bearing Foot Rest Aluminum casting material inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and fixing of Rower Maximum User Weight 120 kilogram, Main Central Pipe 100mm dia G.I. Pipe Heavy, Handle Frame 32mm dia G.I. pipe, Seat Frame 32mm dia G.I. Pipe, 32mm dia G.I. Pipe, Connecting Links Pipe, Foot Rest Pipe 32mm dia G.I. Pipe, MS Foundation Plate Thickness 12 millimeter 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X4mm Seat and Back Rest 2.5mm thick, M.S. Perforated with uniformbending radius to avoidsharp edges Bearings Tapered Roller Bearing inclusive of all materials, labours and fixing etc, complete

Supply and fixing of Air Walker/ Stroller Single Maximum User Weight 110 kilogram for Main Frame 125mm dia G.I. Pipe, 40mm dia G.I. Pipe Leg Movement Frame Pipe, Handle Frame 25mm dia G.I. pipe, Tapered Roller Bearing Foot Rest Aluminum castingmaterial MS Foundation Plate Thickness 12 millimeter, Foundation Pipes 750mm deep GI Pipe, supported withM.S. Angle 25 X 25 X4mm inclusive of all materials, labours and fixing etc, complete

Supply and fixing of Chest Press SINGLE for Maximum User Weight 100 kilogram, Main Central Pipe 100mm dia G.I. Pipe, Handle Frame 32mm dia G.I. pipe, Seat Frame 32mm dia G.I. Pipe, Connecting Links 25mm dia G.I. Pipe, Foot Rest Pipe 32mm dia G.I. Pipe, MS Foundation Plate Thickness 10mm Foundation Pipes with anchoring 500mm deep GI Pipe, Seat and Back Rest 2mm Thick G.I. Seat with uniform bending radius to avoid sharpedges inclusive of all materials, labours and fixing etc, complete

Supply and fixing of Leg Press Single Maximum User Weight 100 kilogram, Main Central Pipe 80mm dia G.I. Pipe, Moving Frame Pipe 80mm dia G.I. Pipe, Foot Rest Frame/ Foot Rest Hinging Pipe 25mm dia G.I. Pipe, Connecting Links 25mm dia G.I. Pipe, MS Foundation Plate Thickness 10mm Foundation Pipes with anchoring 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X4mm, Seat and Back Rest 3mm thick, HDPE with uniform bending radius to avoid sharpedges inclusive of all materials, labours and fixing etc, complete

Lattering and Painting Emblem in accordance with the size and specifications as approved by the Board on the compound wall including cost of all consumables, one coat of base paint charges including cost of all materials and labour charges etc complete

Thirumalai Enterprises (BID ID -1133515)

ELAYANAND ENTERPRISES (BID ID -1133148)

T. Karunakaran (BID ID -1133156)