SMART PERIODICAL SERVICES PREFERABLY THROUGH AUTH OEM AT VIJAY VIHAR AND REPAIR TO PATH COMPOUND WALL FENCING AND GATE AT GRD AT AF STN GORAKHPUR

Amount

Taking down cement or cement lime plaster any description on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified as directed.

M&L Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified as directed.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with liquid WPC @ 150 ml per 50 kg of cement or as per manufacturer instructions ( WPC will be measured and paid separately), finished even and smooth without using extra cement complete all as specified as directed.

M&L Rendering 5mm thick in CM 1:3 on celing, finished even and smooth without using extra cement complete all as specified as directed.

M & L for Taking down cement plaster any description on brick or concrete walls, etc including raking out joints, hacking for key scrubbing down with water etc Rendering 15mm thick in two layars of 10+5 mm in CM 1:4 mixing with pidi Proof 101 LW (+) of Dr fixit or equivalant integral water proofing admixture @200ml/bag over two coats of super latex 302 of dr fixit or equivalent in the ratio (1:4:7),(one part super latex,4part water and 7 parts of cement ) @ 1.5 kg of homogenious mixture/ Sqm in two coats and finish the surface even and smooth with out using extra cement ) for external walls complete as per specification and directed ( Pidi proof and super latex to be measured and paid separately)

M & L for Taking down cement plaster any description on brick or concrete walls, etc including raking out joints, hacking for key scrubbing down with water etc Rendering 15mm thick in CM 1:6 mixing with pidi Proof 101 LW (+) of Dr fixit or equivalant integral water proofing admixture @200ml/bag over two coats of super latex 302 of Dr fixit or equivalent in the ratio (1:4:7),(one part super latex, 4part water and 7 parts of cement ) @ 1.5 kg of homogenious mixture/ Sqm in two coats and finish the surface even and smooth with out using extra cement ) for walls complete as per specification and directed ( Pidi proof and super latex to be measured and paid separately)

Supply only Pidi proof 101 LW(+) complete all as specified and directed at site.

Supply only Super latex 302 complete all as specified and directed at site.

Complete removing of existing treatment on wall /roof projection including facia, cornices etc by scraping with mechanical vaccum mechanism) with sanding pad ofappropriate grit to make surfaceclean,freefrom dust,loose paintetc by skilled labour comlite all as specified and directed.

M&L for providing and applyng minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting complete all as specified and directed at site.

M&L for applying two or more coat of 100% premium acrylic emulsion paint having VOC less than 50gmLtr and UV resistance as per IS 15489:2004,Alkali & fungal resistant dirt resistance exterior paint of requiredshed (Company Depot Tinted ) with silicon additives @ 1.43 Litre /10 sqm over and including priming coat of exterior primer appied @ 0.90Litre /10sqm . colour -Dove colour /approved by GE Note- Primer ,emulsion to be carried out throught air less spray machine (Mechanical means).work shall be done as per MoU between manufature of paint and their authorised applicator complete all as specified and directed (see note) Notes for Smart Periodicals item No. 150, 153 to 159: (a) Tenderer shall be entered necessary MoU between tenderer and manufacturer of paints and their authorized applicator before quoting the bids and submit the same alongwith performance security of tender. (b) Authorised applicator of paint manufactures shall have valid authorization letter from the manufacturer (minimum regional HQs) issued from start of the said finishing work. The authorization letter needs to also be valid for the complete period of execution. (c) Preparation of plastered or un-plastered surface or removal of existing treatment by scrapping of walls, ceiling, chajjas, fins, fascias, parapets etc shall be done by using mechanical sander with internal dust extraction system for clean environment certified by the manufacturer. After preparation of surface, written approval shall be obtained from GE before applying primer and further treatment / coat. Building wise stage passing register shall be maintained. (d) Finishes i.e., cement-based paint, oil bound distemper, acrylic water based interior grade primer, interior acrylic emulsion, acrylic water based exterior grade primer, water based premium acrylic smooth exterior emulsion etc to surface of walls, ceiling, chajjas, fins fascias, parapets etc shall be applied using airless spray technology and capable of operating single spray gun with a suitable hose length. The spray machine should be reputed manufacturer with pro-guard technology and capability of tracking pressure as well as paint & primer usage. (e) This equipment shall be certified by approved manufacturer. (f) The accessories for applying the finishes shall be able to spray in hard to reach areas and penetration of finish on the surface so as to achieve uniform application and quality surface finish.

M&L washing, rubbing down and stopping of distempered and painted surfaces of walls including cornices etc and applying one coat of oil bound distemper white or tinted with roller complete all as specified and as directed.

M&L prepration of surface and applying two coat of oil bound distemper white or tinted with roller complete all as specified and as directed.

All as per item No 13 here in above but one coat of oil bound distemper on ceiling surface complete all as specified and as directed.

M&L for preparing of old decorated surfaces and applying one coat of cement based paint on walls complete all as specified and as directed.

M&L Preparation of old plaster surfaces of wall including complete removal of existing treatment and applying two coats of cement base paint colour -Dove gray colour /approved by GE, complete all as specified as directed.

M&L Preparation of new plaster surfaces of wall and applying two coats of cement base paint over primer colour -Dove gray colour /approved by GE, complete all as specified as directed.

M&L for preparation of old painted wooden based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L preparation of old painted steel surfaces of any description, over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed .

M & L preparation new plastered surfaces of any description , including cornices and applying three coats of white wash on walls complete all as specified and as directed.

M & L preparation old decorated surfaces of any description , applying one coat of white wash on walls complete all as specified and as directed.

M & L preparation old decorated surfaces of any description , applying one coat of white wash on ceiling complete all as specified and as directed.

M&L for rewriting/repainting to existing writing letters or figures not exc 30 cm height in block Roman, Italian or Indian letters including stops, comma, arrows, brackets, dashes etc on sign board (Black or yellow base) including two coats of oil paint over a coat white base synthetic enamel paint, all as directed.

M&L for Removing /cutting trees vegetation, digging out roots from concrete or brick wall filling holes on building wall/roof/cajja/water tank staging area etc and making good with cement mortar 1:4 complete.

Demolition of cement concrete (unreinforced) in ground floors and roof and paving /paver block not exceeding 15 cm thickness (below or above ground level) .complete all as specified and directed

M&L for 40mm thick cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor / paving laid in panels, surface finished even and fair without using extra cement complete all as specified and directed.

M&L 75 mm PCC (1:2:4 ) type B2 using 40 mm graded aggregate as in floors,hard standing, sub base floor finished the surface even and smooth without using extra cement and spike rolling to surface or making impressions of expanded metal whilst the concrete is green..

M&L 75 mm PCC (1:4:8 ) type D2 using 40 mm graded aggregate as in sub base floor .complete all as specified and directed at site.

M&L in repairs for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified including 25 mm sand cutioning complete all as specified and directed at site.

Refixing only machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm/ 80mm thickness complete all as specified including 25 mm sand cutioning complete all as specified and directed at site.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises .

M&L for coloured chequered cement concrete tiles glossy type 300 mmx300mmx20 to 22 mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 20 mm thick cement screed bed in CM (1:6) complete all as specified and directed.

M&L plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate in surface channels and drains complete all as specified and directed

M&L plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping complete all as specified and directed at site.

Extra for forming fair finished drain or channel up to 40 cm inner girth in cement concrete using extra cement incl forms, moulds, mitred/stopped ends etc. complete all as specified and directed at site.

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and directed at site.

M&L Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed at site.

All as per Item No- 37 here in above but except bricks complete all as specified and directed at site.

M&L for brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4).complete all as specified and directed at site.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed

Preparation of old plaster surfaces of wall including complete removal of existing treatment and applying two coats of cement base paint complete all as specified as directed.

Dismantling stone slab & tiles of any description complete all specified and directed

S&F 20 mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like 20 mm cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed at site.

Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situation complete all as specified and directed.

S&F in repair 610 mm dia punchhed tape concertina coil (effectve dia 550mm at stretch iength of coil 6 m) two hendle and spikes at bot ends of ends of coil with dove tail clipes (18 SWG ) including razor wire (07 No) 6m length in each wire width medium size ,barbed length 20 mm and barbed 14mm inclucding 51 pins 128 No of clips in each coil inluding 230 gm / sqm Zinc coating on core ire complete all as spd and directed.

M&L for spot welding in repairs not exc 2.5cm in length exc 6mm but n.exc 9mm thick complete all as specified and as directed.

Dismantling mild steel work of any description not otherwise provided for any position complete all specified by Engineer-in-Charge.

S &F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0

M&L preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M/S GUPTA TRADERS

M/S SHRI RC YADAV

DEEP ENTERPRISES