Cabinetganj colony ke vibhinna awaso ka civil anurakshan evam rangai putai ka karya

Dismantling Old Plaster or Skirting Racking out joint and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metars lead. DAR No-15.56,

15 mm thick Cement Plaster with Cement mortar in proportion of mix 1:4 (1 cement : 4 coarse sand). DSR-13.5.1,

Removing White or Colour wash by Scrapping and sand papering and preparing the surface smoothincluding necessary repairs to scratches etc. complete. DSR-13.88,

Providing and Applying white Cement based Putty of average thickness 1 mm. of approved brand and manufacture. Over the Plastered wall Surface to Prepare the Surface even and Smooth Complete. (DSR-13.80),

Distempring with 1st quality acrlyic distemper (Redy mixed) having VOC (Volatile Organic Compound) content less than 50gram/litre, of approved brand and manufacture including applying additional coats whterever required to achieve even shade and colour. old work (One or more Coats), DAr-13.81.1,

Painting with Synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two of more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. DSR.N0-13.62.1), Rs-226.25/178.73

Providing and fixing ISI marked flush door Shutters Conforming to IS : 2202 (Part I) Non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply Veneening with vertical graints or cross brand and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt Hinges with Necessary Screws. DSR N0-9.21.1,

Providing And Fixing Fly Proof galvanized M.S. wire gauge to windows and Clerestory window using wire gauge with average widht of aperture 1.4 mm both directions with wire of dia 0.63 mm all complete with second class teak wood beading 62x19 mm. DAR No-9.51.1,

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. 30 mm thick Pre Laminated PVC door shutters DAR-9.120.2,

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/plying of load carrying motor vehicle of 3.5 cum or more. DAR-1.1.18,