COMPREHENSIVE MAINT OF STEEL YARD AT NOFRA UNDER GE(NW) NOFRA

Amount

Note : 1. The tenderer shall note that before quoting his unit rate, all items of works shall be executed in high rise building (16th floor building) & including provision of necessary scaffolding & safety measures. (a) Uniform for all deployed staff and duty supervisor as approved by GE. (b) Functional tools & plants shall be carried by tradesman all time for attending any site. (c) Necessary ladder / cloth or any other material reqd. (d) Removal of Debris out side Mod land and site clearance as per the direction of Engineer- in- Charge. (e) Safety eqpt to be carried all the time. (f) Scaffolding wherever reqd deemed to be included in quoted rates. (g) Sufficient manpower shall be deployed by the contractor so that welcome maint of in 01 Qtr shall not take more than 03 working days. Delays are liable to penalties Rs. 1000/- per day & @ Rs. 2000/- per day delay more than 7 Days. (h) Contractor is solely responsible for any defect or after working situation arises, take leaving fresh water tap open or throwing of debris through window or shaft, Penalty levied as mentioned above. (j) In case of non-adherence of any of above fine/ penalty to be carried as under:- (i) 1st Time - Rs 2000/- (ii) 2nd Time - Rs 5000/- (iii) 3rd Time - Warning to contractor and ban for poor performence. (iv) Disciplinary action as deemed fit by the Aceepting Officer. (v) After painting cleaning of all floors, glass and Furniture. (vi)(i) Complaint registered upto 11:00 AM & Emergency complaint to be attended on the same day. (vii) Supervisor will collect keys form complaint Cell. Contractor shall deploy minimum 2 teams having sufficient number of carpentes, plumbers, masons, painter, electriciab etc. to carry out repaie /maint work in fixed fine duration after receipt of complaint.

M&L for prepration of old decorated surfaces of walls filling cracks, holes with wall care putty, finishing surface smooth with emery paper and applying one coat of oilemelsion distemper complete all as specified and directed.

Ditto_ all as per Sl item No 2.00 above but on ceiling complete all as specified and directed.

M&L for prepration of old decorated surfaces of walls & ceiling and applying one coat of plastic emulsion paint complete all as specified and directed.

M&L for preparation of old painted surfaces of wood or wood based surfaces over 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of steel any description over 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Ditto- as per item no.6.00 above but one coat of aluminium paint on steel surfaces complete all as specified and directed.

M&L for prepration of old decorated external wall surfaces & applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including removal of vegitation and fill with smart care putty to match with existing surfaces complete all as specified and directed

Taking down cement plaster on brick on stone walls etc including raking out joint, hacking for key, scrubbing down with water etc and removing debris out side M D land complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished the surface even and smooth (with out using extra cement) complete all as specified.

M&L for rendering 5mm thick in CM 1:3 on fair face of concrete surface in ceiling finished the surface even and smooth with out using extra cement complete all as specified and as directed

M&L for rendering 20 mm thick on fair faces of brick/concrete surfaces with two coats i.e (15 mm thick backing coat in CM (1:6) and 5mm thick finishing coat in CM (1:4) mixed with water proofing compind @ 3% by weight of cement and finished surface even and smooth without using extra cement (WPC shall be measured and paid separately) complete all as specfified and directed.

Supply only integral water proofing compound

M&L for preparing new plastered surfaces of ceiling and applying two coats of oil bound distemper complete all as specified.

M & L for preparing new plastered surfaces of walls applying wall care putty not less than 2 mm thick over a coat of alkali resistant primerand applying two coats of oil emelsion distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered surfaces complete all as specified and directed

M&L for epoxy base joint filler paint on external/internal surfaces of walls to fill the cracks with and including resin and hardner in proportion as per manufacturers instructions complete all as specified and as directed

M&L for complete removal of existing treatment of wall, applying wall care putty not less than 2 mm thick and applying two coats of oilemelsion distemperover a coat of alkali resistant orimer complete all as specified and as directed

Taking down plaster for removal of vegetation to free growth etc on external surface of walls at any height etc by taking all necessary precaution including digging out roots of vegetation and filling holes with PCC (1:2:4) type B1 using (20mm garded stone aggregate) after application of suitable chemical to avoid regrowth of the vegetation including MS scafolding and removing the debris to out side of MOD.Complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5sqm but not exc 4 Sqm each complete all as specified and as directed

-ditto- as per Item No. 20.00 above but not.exc 1.5 sqm each complete all as specified and as directed

Taking down shutters of any description exc 1 Sqm but not.exc 2 sqm each complete all as specified and directed.

S & F Powder coated aluminium sections (minimum thickness of powder coating 50 micron) for shutters and frame of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required complete all as specified. Note :-(i) Glass pne shall be measured and paid seperately. (ii) The rate ratequated shall be inclusive of neoprene beading, glazing clips, screws etc as required but shall not be measured for arriving weight. (iii) The rate shall be inclusive of locking arrangement inclusing complete packing with silicon gel around contacting surface of aluminium work with matching existing areas. (iv) The size of aluminum section shall be as per HQ CE TD drawing No TD/2021/01 to 05 .

Taking down aluminium windows shutters of any size and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium cleats of existing make and also refixng the locks & roller in existing postiion with and refixing the window shutters in same opening including providing glass/aluminium wire mesh/floor spring/concealed lock complete all as specified and directed.

S&F in repairs concealed star lock powder coated for aluminium window fixed as per manufacturers instructions.

Hacking out old broken glass ( any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M&L for 4 mm thick plain glass sheets ordinary quality in squares n.exc 0.5sqm each pane fixed with rubber beading in aluminium windows/doors complete all as specified and directed.

M&L for 4 mm thick plain glass sheets ordinary quality in squares exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

S&F in repairs aluminium anodized grill of design DG 104 pattern made out of 10mm dia rod fixed with and including standard aluminium frame of F section of size 23.40mmx15.30mm &1.4mm thick all as per manufactures instructions complete all specified & directed.

S & F 150 mm size.extruded aluminium alloy handles fabricated type ISI marked complete all as specified and directed.

S & F in repairs 150 mm size.extruded aluminium alloy handles fabricated type ISI marked complete all as specified and directed.

S&Fin repairs aluminium (extruded section) body door closer hydraulically regulated, designation No.2, universal type, suitable for door shutter of 701 to 850 mm in width & of weight between 36 to 60 kg complete all as specified and directed.

S&F in repairs 75mm size 6 lever brass body concealed lock with duplicate keys, fixed in aluminium/wooden doors as per manufacturers instruction complete all as specified and directed.

S&F 35mm thick second class hard wood (SAL), plain framed, panelled shutter (Two panel) of 9mm BWP comercial ply or 12mm veneered particle board with comercial veneering on both faces the size of rail land stile as per IS 1003 (Part-I) killn seasoned and chemically pressure treatedcomplete all as specified and directed.

M&L for IInd class hard wood (SAL), plain solid, straight, chowkats and frames wrought framed rebated on the solid , rounded or chamfered put together with glue pinned at jointscomplete all as specified and directed.

S&F mild steel flat iron 25 x 3 mm as in hold fast etc or similar small articles conforming to Fe- 410-0 or 310-0.complete all as specified and directed.

S&F 100 mm size stainless steel Butt hinges ,medium weight, with SS hinge pin , bright finished complete all as specified and directed. .

S&F 200 mm long aluminium anodized barrel tower bolts of extruded sections ISI marked complete all as specified and directed.

S&Fin repair 200 mm long aluminium anodized barrel tower bolts of extruded sections ISI marked complete all as specified and directed.

S&F 300mm long aluminium alloy, sliding bolts of extruded section or cast aluminium alloy ISI marked fixing clips and fixing bolts complete all as specified and directed.

S&F in repairs 300mm long aluminium alloy, sliding bolts of extruded section or cast aluminium alloy ISI marked fixing clips and fixing bolts complete all as specified and directed.

S&F 250mm long aluminium alloy, sliding bolts of extruded section or cast aluminium alloy ISI marked fixing clips and fixing bolts complete all as specified and directed.

M & L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F in repairs 140mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed

M&L for 18/19mm thick prelaminated particle board exterior grade prelaminated both sides with decorative choice lamination fixed with screws to timber/ metal frame work including all necessary fittings such as knob,hinges,lock,for cupboard and others including taking down old board of any type complete all as specified and directed

S&F solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with MS square tube and edges painted to match with printed sheet complete all as specified.

S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with salvent cemet for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement suppling and fixing in the frame at site all as specified and directed.

S&F 2nd class hard wood 35 mm thick Glazed and skelton shutter open rebated and prepare to receive glass, gauze etc. (without sash bars) edges of framing plain, chamfered or rounded fitted with and cut and mitered beads, for securing glass sizes of members of shutters as specified in SSR Part I Sec 8 Clause 8.24(a) supply and fitted to chowkats inclding IInd class hardwood plain, fillets, wrought, square, rectangular or triangular in section exc 13 & n.exc 25 sqcm secured with nails or brads of size for securing wire mess and glass complete all as specified and directed

S&F aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples complete all as specified and as directed

S&F in repair aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples as fixed complete all as specified and as directed

Taking up and down 15 mm bore GI tubing and connection complete all as specified and directed.

_Ditto_ all as per Sl item No. 52.00 above but 20 mm bore complete all as specified and directed.

_Ditto_ all as per Sl item No. 52.00 above but 25 mm or 32 mm bore complete all as specified and directed.

S & F15 mm bore GI tube medium grade with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

_Ditto_ all as per Sl item No. 55.00 above but 20 mm bore complete all as specified and directed.

_Ditto_ all as per Sl item No. 55.00 above but 25 mm bore complete all as specified and directed.

S&F in repair 32mm bore PVC waste pipe suitable for WHB,kitchen shink and urinals complete all as specified and directed.

S&F in repairs table top Wash hand basin vitreous china size 600 x 400x150 mm jaquar cat part number KUS-WHT-35931PM or equvalent including brass C P bottle trap 32mm size with 300mm & 190mm long wall connection pipes & wall Flange jaquar cat part number ALD-769L300x190 and all necessary connected items such as waste coupling 32mm size full thread with 130 mm height jaquar cat part number ALD-727L130 . complete all as specified and directed.

S&F in repairs 15 mm bore fancy type pillar taps / cock with extension body jaquar cat part number FLR-5021M chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts compleat all as specified and directed.

S&F in repairs 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe, complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing blts, flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair coloured PVC seat cover for pedestal pan closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repairs10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng C I brackets complete all as specified and directed.

S&F in repair brass CP towel rail, 20mm dia, D type , 60 cm long between flanges complete all as specified and directed.

S&F in repair Aluminium anodised towel rod, 20mm dia complete all as specified and directed.

S&F in repair Aluminium anodised Brackets for towel rail, 20mm dia, complete all as specified and directed.

S&F in repair stainless steel Toilet paper holder with flat recessed type fixed to walls with chromium plated brass screw complete all as specified and directed.

S&F in repairs fancy type chromium plated stop valves 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repair 15 mm bore health faucet with 1 m long PVC tube with wall hook chromium plated fitted with stop/angle cock complete all as specified and directed.

S&F in repair gun metal globe or gate valve (ISI marked) of 20 mm bore with iron wheel head, screwed both ends for iron pipe & fixed complete all as specified and directed.

S&F in repair gun metal globe or gate valve (ISI marked) of 25 mm bore with iron wheel head, screwed both ends for iron pipe & fixed complete all as specified and directed.

S&F in repair 15 mm bore angle stop valve of PTMT any colour high presurre screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 125 mm size brass CP shower rose complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting uinon to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed

S & F in repairs providing 15 mm dia PVC connection of length 450mm long complete all as specified and directed.

Demolition of brick work/stone masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles including coping including removing debris out side MD land complete all as specified and directed.

M&L for brick work with sub class 'B' bricks old size, full or half bircks works straight or curved on plan exc 6m mean radius in cement mortar 1:6 complete all as specified and directed.

Taking down eaves gutters and rainwater pipes( any size or pattern) , including all fittings, heads, shoes, bends , swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories) including necessory scafolding complete all as specified and directed.

S &F 160 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with dash throgh fastners and rain water bracket suitable for 160 mm bore pipe spacing 1.5 m c/c as per CE (Navy) mumbai drg No TD/2023/01 or laid in floor complete all as specified and directed. complete including ss clamping , scafolding etc all as specified and directed.

Ditto all asper item No 81.00 above bt bore of pipe 110 mm all as specified and directed.

Ditto all asper item No 81.00 above bt bore of pipe 75 mm all as specified and directed.

S&F PVC (SWR) bends any radius 160mm bore fixed with rubber ring joints complete all as specified and as directed

S&F PVC (SWR) bends any radius 110mm bore fixed with rubber ring joint complete all as specified and as directed

S&F PVC (SWR) bends any radius 75mm bore fixed with rubber ring joint complete all as specified and directed

M&L for PVC (SWR) branch piece, single single 'Y' equal or unequal 110mm bore fixed complete all as specified and directed

S&F PVC (SWR) branch piece, single single 'Y' equal or unequal 75mm bore fixed complete all as specified and directed

S &F PVC (SWR) branch piece, double 'Y' equal or unequal 110mm bore fixed complete all as specified and directed

M&L for PVC (SWR) branch piece, double 'Y' equal or unequal 75mm bore fixed complete all as specified and directed

S&Fin repairs 15 mm bore fancy type bib taps chromium plated cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule , complete all as specified and as directed

S&F in repairs 100 mm outlet cast iron nahani trap , with SS grating including jointing to waste pipe and fixed in cement concrete (1:2:4) type B1 ( using 20 mm graded stone aggregate ) complete all as specified and directed.

Demolition of sunken floor area including cement Concrete and tiles of any description and in any position in bathroom area not otherwise specifically provided for including removing debris out side MD land complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate), as in floor 40mm thick.all as specified and directed.

M&L for providing 12 mm dia holes of 75mm deep @0.6 m c/c at junction of beams,sunken ares and columns as co-ordinal points for inserting/pouring mixture of resin base latex polymer and cement slurry by pressure grouting for column, beams and slabs, includind sealing the holes with CM 1:3, complete all as specified and directed.

M&L for water proofing treatment of sunken floor/wall surfaces by applying two coats of elastomeric coatings of BRUSHBOND RSX in FOSROC or TECKFORCE 2K STRONG in CHOWKSEY CHEMICALS or equivalent as a two component flexible elastomeric coating with minimum 2mm thickness layer all as specified and directed.

M&L for rendering minimum 20mm (15mm+5mm) thick polymer modified mortar in cemet mortar (1:3) with graded quartz sand with additive Monolith - PMM of Krishnaconchem or polymer mortar HB of Dr. Fixit or Shalifix RM SG 01 of STP Ltd. 15% by weight of cement in two coats at (sunken portation) (one coat 5mm thick at bottom and second coat 15mm at the top of concrete) with and including curing as per manufacturer's instruction complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement morter bedding ( but not backing), including removing debris out side MD land complete all as specified and directed.

M & L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) etc complete all as specified and directed.

M & L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for glazed coloured ceramic tiles 300x200x7mm thick in vertical surface such as skirting and dados, set and jointed in neat cement paste and pointed in coloured cement to match inlcuding 10mm thick backing coat in CM 1:4 etc complete all as specified and directed

Taking down cast iron pipes of any size or pattern at any position including all fittings such as bends, heads (measured overall as fixed along the centre line over fiitings and accessories) including removing vegetation growth around pipes making good to disturbed surface to match with eixisting including necessary scaffolding and saftey measures etc complete all as specified and directed

M&L for 100m bore cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls with G I clamp of suitable size complete all as specified and directed

M&L 75mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls with G I clamp of suitable size complete all as specified and directed

S&F 100 mm bore CI bends diminishing pieces or trapers (larger bore measured) fitted with oval access doors complete all as specified and directed

S&F 75mm bore CI bends diminishing pieces or trapers (larger bore measured) fitted with oval access doors complete all as specified and directed

S&F 100 mm bore CI branch pieces single (equal or unequal) ordinary or inverted ( spigot or socket type) or with parallel branches complete all as specified and directed.

S&F CI branch pieces single (equal or unequal) ordinary or inverted ( spigot or socket type) or with parallel branches of 75mm bore complete all as specified and directed.

.-Ditto- al as per Srl ietm No. 107.00 above but double socket

.-Ditto- al as per Srl ietm No. 108.00 above but double socket

S & F in repairs factorymade precast moulded and vibro compacted RCC manhole / drain cover with necessary handles of size 900 x 600 x 100mm placed in position where ever required as directed by Engineer in Charge.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof /wall coverings

M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in ridge/ valley/ gutter fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and as directed.

M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and as directed.

Dismantling wrought iron or mild steel complete all as specified and as directed

M&L for rolled mild steel section main and cross beams, hip and jack rafters; purlins, where connected to common rafters and running rails and guides in any situation including cutting welding, fixed with angle cleats or other connecting plates confirming to Fe 410-W (Gde E-250) quality A complete all as specified and directed.

M&L for preparing new or previously untreated steel surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

Demolition of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar including removing debris out side MD land complete all as specified and directed.

M&L for 18-20mm thick granite stone slab of machine cut mirror polished in flooring , bedded and jointed with grey cementpaste and pointed with white cement with admixture of pigment to match the shade of granite stone including 15mm thick screed bed in CM 1:4 complete all as specified.

M & L for 18-20mm thick granite stone slab machine cut mirror polished in skirting/dado and jointed with grey cement paste and pointed with white cement with admixture of pigment to match the shade of granite stone and including 10 mm thick backing coat in CM 1:3 complete all as specified.

M&L for Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade confirming to IS 15658-2006 made by block making machine with strong vibratory compaction, of approved colour, laid in required colour and patteren all as specified and directed.

M & L for 25 mm thick Sand filling under floors or in foundations including watering and consolidation all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above ground level including removing debris out side MD land complete all as specified and directed.

M&L for PCC type D2, 1:4:8 (using 40mm graded stone aggregate) 100mm thick as in sub basecomplete all as specified and directed.

M& L for Complete removal of existing water proofing treatment of any description in any position including roof tiles, pcc.brick bat coba,upto any thickness cleaning, with wire brush to remove all dust dirt and wahing with water including removing debris out side MD land complete all as specified and as directed

M & L PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in padding over roo/chajja for maintaining roof/chajja slope including finishing surface even and smooth with out using extra cement complete all as specified and as directed

M&L for applying oil bound primer @ 0.40 Litre/Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg/Litre at 25 degree cesius on the prepared dry roof surface and provide and lay 4mm thick APP modifed water proofing membrane reinforced with non-woven polyster matt with physical properties as given in particular specification. The laying shall be done through authorized applicator of manufacturer. Provide over the membrane finishing with two coats of solar reflective bituminous aluminium paint @ 0.10 Kg/sqm as prescribed by manufacturer of membrane all as per manufacturers instructions and as directed by Engineer-in-Charge. Note : Rate inclusive of taking down and re fixing of water tank and GI pipes and existing lightning arrestor system including provision of new PCC block,water tank of same capacity and GI pipes for damaged PCC block,water tanks and GI pipes complete as directed by Engineer-in-charge

M&L for cement concrete tiles 25CmX25CmX22 mm thick, machine pressed,(with grey cement & no pigments), set jointed and pointed in neat cement slurry in floors over and including 15 mm thick bedding layers in CM 1:3. all as specified & directed by engn-in-charge

S&F in repair 300 ltr white rectangular PVC water storage tanks (Loft tank) including fixing 03 Nos tank nipples of GI/CPVC with washer for out let and inlet all as per manufacturers instructions including disconnecting service connections/over flow pipes and removing old tank complete all as specified and directed.

S&Fin repair 300 ltr PVC profile sheet suitable for PVC Loft tank of capacity following sizes including fixing aluminium/ PVC channel around the profile incl removing of tank and refixing the same complete upto any floor height complete all as specified and directed.

S&F in repairs 15 mm bore brass float valve, high pressure with polythene float & fly nut complete, screwed for GI of following sizes including necessary GI fittings upto any floor height complete all as specified and directed.

S & F in repairs cast iron drain cover with frame including fixing in position, painting with black bituminous anti crossive paint complete all as specified and as directed

S&F anti statics rubberrised flooring tiles /sheets, of 25mm thick laminated plain coloure homogenous, laid with approved rubber based adhesive in floors including Grounding Strips(copper),Grounding Point etc includng all necessary fittings all as specified and directed.

Dismantling of water tank capacity .exc 2000 ltrs and removing to store all as specified in SSR Part I and directed

S&F rotational moulded polythene water storage tank of 3000 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and directed

S&Fin repairs rolling shutter with/without ball bearing, thickness of laths 1.25mm as specified including top cover, anchoring rod, hasp and staple, gear operated type with chain wheel and hand chain and one shop coat of primer and two coat aluminiam paint complete all as directed.

S&F in repairs 15 mm bore two way bib cock with wall flange of Jaquar Cat No FUS-29041 complete all as specified and directed .

S&F in repairs corner glass shelf with bracket of Jaquar Cat No. ACN-1173 or equivalent complete all as specified and directed.

M&L desilting and cleaning the septic tanks/manholes/sump/open drain of any size/shape/depth by removing liquid, waste, night soil, sludge mechanically or manually with all necessary precaution as per rule in vouge as directed including depositing the sludge by excavation with depth not less than 30cms with necessary arrangement to avoid adours such as refilling excavated earth on eposited sludge and removing surplus soil to a distance out side MDarea and deposited where directed complete all as specified. Note :- For purpose of measurement and payment internal size of the tank upto liquid depth only shall be considered. Note :- (i) For purpose of measurement and payment EACH TIME of the cleaning of chockup shall be considered. (ii) If required contractor shall arrange non submersible sewage pump for cleaning sludge from sewage sump with out any extra cost.

M &L for Cleaning to sewage pipe (SWG) systematically as directed by passing rope knots, bamboos etc of required size and shape and removing waste/sludge and depositing sludge as mentioned in item No. 139 hereinbefore for the drain pipes of the any sizes all as specified and directed. Note :- For purpose of measurement and payment EACH TIME of the cleaning of chockup shall be considered.

Cleaning to toilets, bathrooms chockup systematically as directed by passing rope knots, bamboos etc of required size and shape and removing waste/sludge and depositing sludge as mentioned in item No. 139 hereinbefore for the drain pipes of the following sizes upto any floor height all as specified and directed. Note :- For purpose of measurement and payment EACH TIME of the cleaning of chockup shall be considered.

S &F in repairs stainless steel plate rack of size 900X580X210 mm of grade SS-304 with CP screwscomplete all as specified and directed.

ASHOK CONSTRUCTION (BID ID -3509322)

SN CONSTRUCTION (BID ID -3508043)

Anil Industrial Corporation (BID ID -3506252)

SATGURU ENTERPRISE (BID ID -3509637)

SHRI SAI ENTERPRISES (BID ID -3509349)

Nilesh Construction (BID ID -3507597)