Attending special repairs of 30 Ton Capacity Steel Barge of size 12.00 X 4.50 X 1.60 M stationed at PBHC, Sri Vijaya Puram.

Site preparation for fabrication of pontoon, facilitating the smooth launching of the pontoon upon completion of fabrication, at locations near the Beachout Area / permissable areas/ other approved locations and access routes for shifting and handling MS materials using engaged equipments, as directed by EIC. The rate shall include all costs towards hire charges of excavators, major and minor T&P, labour, transportation, GST, LWC, etc., complete.

Beaching of the 30 Ton Cap. Pontoon beyond the highest water level (preparing the site for smooth beaching of barge by providing the sufficient gradient, clearing all foreign materials from the site, bailing out of inside sea water etc. ) by using the multiple sleeve pulley wire rope arrangement using the hitachies as a power source to pull the barge, providing sufficient timber rollers in bottom side through out the width of barge, hauling the barge to the required position incluiding cost of all labour charges, cost of minor tools & plants, the hire charges of wire rope,multiple pulleys, D shackles, Jacks, LWC and GST etc., complete but excluding the hire charges of power source to pull the barge in to shore which will be paid separately .

Lifting the Pontoon to a height of not less than 90 cm packing the pontoon with proper size of timber beams/steel stand and jack arrangements. The rate is inclusive of all labour charges, hire charges of jacks and other tools and plants, LWC and GST etc., complete.

Providing and laying timber cushion for the bottom plate of barge with standard hard wood in various sizes as per actual requirement at site and as per the instruction of EIC, after lowering the barge,the site is to be cleared immediately by removing the timbers/rubbish/garbage etc.The timber cushion are to be laid properly in layers longitudinally and cross wise as per the requirement for placing the bottom plate of the barge without any deviation. The timber provided for the cushion shall be got approved by the EIC.The work involves supply and transportation of timber, cutting & sizing into suitable length, loading and unloading, placing beneath bottom plate, hire charges of truck etc., complete.. The rate is inclusive of LWC and GST but excluding the hire charges of power source to push the barge in to water which will be paid separately.

Removing the water and sand deposit from the compartment of barge by using pump, cleaning the compartment by removing dust mud and other foreign materials, checking and assessing the condition of structural members. The rate is inclusive of all labour charges, minor tools and plants, exhaust fans, lifting arrangements, GST, LWC etc. complete.

Cutting and removing the damaged shell plate, structural members of 30 ton Pontoon by gas cutting to facilate the fitment of new steel section as per the original dimension, transportation of scrap steel sections to the department store including the cost of all labour charges,gas cutting materials and hire charges of gas cutting equipment , GST LWC etc. complete.

MS Plate 8 mm thick, (IS 2062 E250A)

MS Plate 10 mm thick, (IS 2062 E250A)

MS Angle 75 x 75 x 8 mm, (IS 2062 E250A)