Annual repair to Residential Qtrs.( Type-A) CHA Colony at Madhuban Area for the year 2025-26

Amount

Dismantlimg & removing of the following old damaged items as per the reqiurment at site at any height upto any floors including scaffolding, disposing the same at specified place including supplying of all labours, materials, T&P etc all complete as per the direction of Engineer-in-charge.(Excluding GST).

Plastering

Brick work.

Old damaged grading from roof surface.

R.C.C. member.

flooring

Brick work in Fly Ash Bricks of size 25Cm X 12Cm X 8Cm and having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm with C.M (1:6) including splay / cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour, T&P, tollage, royalties, taxes, staging, scaffolding, curing, water charges all transportation charges etc. all complete & as per direction of Engineer-in-charge. (Excludicng cost of GST).

In foundation & plinth

In superstructure

12mm thick Cement Plastering with CM(1:6) proportion, over brick work including racking out the joints, finished smooth to the exposed surface, rounding thecorners wherever found necesary including cost & supply of all materials, labour, T&P, staging scaffolding, watering, curing, taxes, tollage, royalties, etc. complete as directed by Engineer-in-charge.(Excluding GST).

25mm. thick A.S. flooring in cement concrete (1:2:4) at all floors & levels using 12mm. and down grade hard granite chips of approved quality including mixing, hoisting, laying, consolidating, curing, by water tanker, finished smooth to the exposed surface with a floating coat of cement punning, rounding the corners where found necessary including cost of supply of all materials, labour, T&P, taxes, tollage, royalties, transportation charges, etc. complete & as per direction of Engineer-in-charge.(Excluding GST)

Supplying of 110mmΦ PVC pipe(ISI make) with all fittings of required length including removing /dismantling the damaged/broken portion of pipe & fixing the same in position with PVC clamp, bobbin, brackets with leak proof joints, etc with supply of all labour, T&P, etc. as directed by Engineer-in-charge.(Excluding GST)

R.C.C(1:1.5:3) using 12mm to 20mm size H.B.G. chips for all floors, foundation & plinth etc. of approved quality, mixing as per approved design mix, hoisting, laying, compacting, curing including centring & shuttering with cost and supply of all materials, labour, T&P, taxes, tollage, royalties, laboratory charges for performing design mix & testing as per relevant IS code etc. all complete as directed by Engineer-in-charge..(Excluding GST).

Providing rigid smooth leak proof centering & shuttering made of steel/ply, plank of approved quality for R.C.C. structures and deshuttering and removing the same after due period with supply of all materials, labour, T&P, taxes, royalties, tollage, etc. all complete but excluding GST as directed by Engineer-in-charge.

In foundation & plinth

In superstructure

Reinforcement to R.C.C. works with supply of Fe-500 steel SAIL/VIZAG/RINL/TISCON or equivalent as per relevant I.S. & cutting bending, binding straightening of M.S. Tor Steel/Coil tying the grills and placing the grills in position including supply of 18 gauge binding wire with supply of all materials, labour, T&P, all taxes, etc. complete as directed including cost of steel.(No wastage shall be paid. Steel coefficient should be as per IS 1786).(Excluding GST).

Dry brick khoa rammed to 10Cm. thick using K.B. Brick khoa, laying to proper level slope, watering, ramming to level, to receive A.S. Flooring including cost and supply of all materials, labour, T&P, taxes, etc. complete as per direction of Engineer-in-charge. (Excludicng cost of GST)

Deployment of skilled and Un-skilled labour for attending day to day maintenance work like minor cement work & other Miscellaneous work with supply of necessary T&P etc. all complete as per direction-in-charge. ( N.B. The agency has to make e- payment to the workers including EPF&ESI as per the wages fixed by Govt. of India/PPA from time to time .This must be strictly adhere to.

Skilled labour ( Mason)

Un-Skilled labour ( Helper)

Dismantling and removing the old damaged shutters, chaukaths, ventilators, shutters with frames including removing the fastenings, depositing the dismantled unusable materials at departmental store with cost supply of all labour, T&P, staging, scaffolding, all transportations etc. Complete & as directed by Engineer In-Charge..(Excluding GST).

25mm. (av) thick graded cement concrete in C.C.(1:2:2) using 12mm. to 6mm. size hard granite chips of approvedquality including cleaning the roof top, washing, mixing, hoistinglaying to proper level slope, gradient making rounding hunching at the corners, joints,finished smooth to exposed surface over 2 coats of WPC as water proofing course with cost and supply of all materials, labour, T&P, taxes,tollagetransportations, curing,etc.allcomplete but excluding GST as per direction of Engineer-in-charge.

Repairing of old damaged door/window Supply of 32mm thick seasoned Non-Sal/Hard wood paneled Door/window shutters as is where required having both side styled moulded having bottom rail of 200 mm thick,top rail 100mm thick , middle lock rail 200 mm thick alongwith straight vertical moulded style of 125mm width (total 2 panels) and panel should be 20 mm thick piasal plank embedded 16mm to styles & rails with one no of aluminum aldrop of size 300mm x 16mm x 40mm, two nos of 150 mm with 175mm x 40mm flat aluminum handles, 2 nos. of 200 mm x 10mm aluminum tower bolts and required numbers of wooden hinged cleats, fixing at position etc all complete . including cost of all materials, labour, loading & unloading Charges, all taxes, transportation charges, stacking at site store etc. all complete as directed by Engineer In-Charge.(Excluding GST).

Supplying R.C.C. door /window frames of cross section 100mm X60mm of m-25 concrete using OPC-43 Grade cement and steel reinforcement of 5.5mm to 6mm dia M.S Rod with provision of hinges,locks,W.I.Clamps.etc all complete as directed by E.I.C,Excluding GST.

Labour charges for fitting & fixing ofRCC Door frame clamps with supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST)

Supplying, fitting, fixing Sal wood frame choukaths for doors, windows,ventilators,coaltaring two coats to wall side face of frame, fixing to position with required nos. of W.I. clamps of size 25cm to 30cm long,35mm wide, 2mm to 3 mm thick in C.C(1:3:6) including cutting grooves in choukaths, jointing with adhesive solution fixing to proper position etc. all complete including cost and supply of all materials, labour, T&P,all taxes, transportation, staging, scaffolding etc. complete as directed by the Engineer-in-charge..(Excluding GST). NB: Without painting.

Supplying fitting and fixing of 25mm thick WPC door shutter of 0.55 density with all fittings and fixtures with stainless steel including cost of loading & un-loading charges, with supply of all labour, materials like hinges, tower bolt, handle, aldrop etc. T&P, all taxes, transportation, all lead and lift etc. complete as per direction of Engineer-in-charge (Excludicng cost of GST) ,

Supplying, fitting & fixing of WPC door and window frames of size( 50x70mm) of 0.75 density with all fittings and fixtures with stainless steel including cost of loading & un-loading charges, with supply of all labour, materials like hinges, T&P, all taxes, transportation, etc. all lead and lift complete as per direction of Engineer-in-charge (Excluding cost of GST)

Supplying of following items including cost and supply of all labour, all fittings, T&P, all taxes, transportation from departmental stores to work site, staging, scaffolding, etc. all complete as per direction of Engineer-in-charge. etc. all complete & as per direction of Engineer-in-charge.(Excluding GST)

Wooden fittings: 12mm. BWR Ply Wood (ISI).

19mm. BWR Ply Wood (ISI).

6mm. BWR Ply Wood (ISI).

9mm. BWR Ply Wood (ISI).

Stainless Steel fittings: Stainless Steel Handle 125mm.

Stainless Steel Handle 100mm.

Stainless Steel Handle 75mm.

Stainless Steel Tower bolt barrel type (150mm X 10mm).

Stainless Steel Tower bolt barrel type (100mm X 10mm).

Stainless Steel Aldrop (15mm X 300mm long).

Stainless Steel Hinges (125mm. X 75mm. X 4mm.).

Stainless Steel Hinges (100mm. X 50mm. X 4mm.).

Stainless Steel Hinges (75mm. X 63mm. X 4mm.).

Stainless Steel Hinges (50mm. X 35mm. X 3.2mm.).

300 X 16mm. Stainless Steel Aldrop (Stapple).

Paint items: Wood primer.

Red Oxide primer.

Enamel paint.

Miscellanious items: Wair nail (1/2" to 4").

Stainless butt hinges (75mm. X 47mm. X 0.70mm).

Fevicol.

5mm. Thick plain / frosted colour glass.

Cement.

Sweet Sand.

Nail of different sizes.

Oxidised Mild Steel screws 50mm.

Oxidised Mild Steel screws 40mm.

Oxidised Mild Steel screws 30mm.

Oxidised Mild Steel screws 25mm.

Oxidised Mild Steel screws 20mm.

Factory made PVC rigid foam sheet 5mm thick.

Deployment of skilled and Un-skilled labourI including EPF&ESI for attending day to day maintenance work like carpentry work & other Miscellaneous work with supply of necessary T&P etc. all complete as per direction-in-charge. ( N.B. The agency has to make e-payment to the workers including EPF&ESI as per the wages fixed by Govt. of India/PPA from time to time .This must be strictly adhere to.

Skilled labour ( carpenter)

Semi-skilled labour ( helper)

Supplying, fitting, fixing of MS welded grills, fabricated with suitable M.S angle and flat, welded to proper shape , size & design fixed to position with screws, nails and grouting to walls in C.C (1:2:4) including cutting grooves in walls and making good the damages with cost and supply of all materials, labour, T&P, taxes, transportation, welding charges , grinding, staging, scaffolding, curing etc. all complete as per the direction of Engineer in charge.(Excluding GST).

Painting one coat to interior wall surface with oil bound distemper paint of approved quality shade preparing the surface sand papering, applying paint uniformly including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc. complete and as per direction of Engineer-in-charge. .(Excluding GST).

one coat

two coats

Enamel painting one coat to wood/iron work of approved quality & shedover a coat of primer after scrapping, sand prepering & cleaning the surface & filling the joints & holes with putty(bolied or raw) where found necessary before paint including all cost, supplying of all labour, materilas, T&P, scaffolding at any hight all complete as per the direction of Engineer-in-charge..(Excluding GST).

Removal/cutting, uprooting of wild growth, unwanted trees etc. from wall surface, chhajjas, Parapets of residential buildings with scaffolding at any height including supply of all labour, materials, T&P etc. all complete as directed by Engineer in-charge. (Considering 12 Qtrs. as a block). (Excluding GST)

Providing & fixing of 32mm thick factory made panelled hard wood door,windows, made out of duly seasoned & treated hard woods. The Styles, Rails & Intermediate rails are kiln seasoned as per IS-1141, ASCU Chemically pressure treated as per IS-401, Panels are also seasoned and chemically pressure treated made out of hard wod as per IS-1003/Part-I & II . Necessary fitting & Fixtures to fix the shutters inposition with Screws of stainless steel et. with cost of loading & un-loading stacking at departmental stores including dismantalling the damaged shutters and depositing the old/damaged/dismantted shutter at section office with supply of all labour, materilas ,T &P, all taxes, transportation, etc. complete as per direction of Engineer-in-charge.(Excluding GST)

Making lead caulked joints to C.I. Pipe and special as per specification including making lead jointing caulking, gasketing and testing the joints and supply of lead, Gasket, fire wood, cost and conveyance of all materials required for the work and all labour, T&P, taxes, etc. all complete and testing the pipe as per direction of Engineer-in-charge (Excluding GST).

100mm dia. Lead joint

150mm dia. Lead joint

200mm dia. Lead joint

250mm dia. Lead joint

300mm dia. Lead joint

450mm dia. Lead joint

Cleaning of chocked ferrule points ( excluding fittings )& replacing of G.I fittings if necessary as per site condition including earth work excavation and refilling with labour, T&P checking the pipe line to ensure no leakage on resuming to required pressure with mending good to damages etc. all complete as per direction of Engineer-in-charge.(Excluding GST)

Cleaning of O.H tank of multistoried building, cleaning the deposited silt inside the tanks by aid of pans & vessels & brushing the interior surface by soft brushes using bleaching / surf wash for germ free as per direction with supply of all labour & pumping out water by diesel pump with hire & running charges of pump including cost of fuel & operator scaffolding upto any height if required etc complete as per direction of Engineer-in-charge.(Excluding GST) .

Supplying of following PH materials of good quality with ISI mark with all transportation loading & unloading at both ends with all taxes, tollage, royalty etc. Complete & deposited in the section store as per direction Engineer-in-charge.(Excluding GST)

Porcelain hand wash basin (parryware/Hindware/Hindustan)(16" x 22")

15mm dia C.P Pillarcock (Plaza/Amber)

32 mm CP waste

40/50 mm steel sink waste

32mm PVC Waste pipe

15mm Connection pipe (PVC/CP) Water take

Steel Kitchen Sink (24''x18''x10'') (Hindware/Parryware/Johnson)

5mm thick bevelleged plate glass mirror 24" x 18" size with masonite board and mirror screw.

50mm G.M.F.W.V

40mm. G.M.F.W.V

25MM G.M.F.W.V

20mm G.M.F.W.V

15mm G.M.F.W.V

10 ltr capacity PVC low level cistern (Slimline)

CP Soap Holder

CP shower (over head)

20mm dia 60cm long towel rail

CP self ( 20"x 5")

150mm/100 mm dia C.I/CP. Grattings

15mm dia C.P stopcock(Amber/Plaza)

20mm dia C.P stopcock(Amber/Plaza)

20mm dia C.P concealed stopcock(Amber/Plaza)

15mm dia C.P angle stopcock(Amber/Plaza)

15mm long body C.P. Bib cock(Plaza)

15mm CP Bibcock (Plaza / Amber).

15 mm dia Symet bibcock (Prayag))

15mm dia PVC pillar cock (Prayag)

15mm dia PVC Angle cock (Water take)

Cistern washer black 5mm thick

PVC washer 20mm /15mm

Long Flush bend for Cistern

C.P Towel ring

White cement

Gasket

M-seal

Basin rack bolt

Nut & bolt with washer different sizes

Hacksaw blade

Brass spindle for bibcock/pillarcock/stopcock

Porcelain 23" IWC ( Orissa Pan)

Commode (p-trap) EWC/AWC with cover

Commode (s-trap) EWC/AWC with cover

commode sheet cover and clamp (Parryware)

15mm to 50 mm MS Clamp

4000 ltrs capacity (PVC-3 core white colour Sintex Make)

2000 ltrs capacity (PVC-3 core white colour Sintex Make)

1000 ltrs Capacity (PVC-3 core white colour Sintex Make)

Supply of G.I Pipes (Medium Quality)/PVC pipes (Sch-80) of different dia. with ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST).

15mm Dia. G.I pipe (TATA/JINDAL)

20mm Dia. G.I pipe (TATA/JINDAL)

25mm Dia. G.I pipe (TATA/JINDAL)

40mm Dia. G.I pipe (TATA/JINDAL)

50mm Dia. G.I pipe (TATA/JINDAL)

15mm UPVC Pipe (Supreme/Oriplast)

20mm UPVC Pipe(Supreme/Oriplast)

25mm UPVC Pipe(Supreme/Oriplast)

40mm UPVC Pipe(Supreme/Oriplast)

50mm UPVC Pipe(Supreme/Oriplast)

Supply of U-PVC fittings of different dia. of medium quality as per ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST)

15mm Dia. U-PVC union

20mm Dia. U-PVC union

25mm Dia. U-PVC union

40mm Dia. U-PVC union

50mm Dia. U-PVC union

15mm Dia. U-PVC elbow

20mm Dia. U-PVC elbow

25mm Dia. U-PVC elbow

40mm Dia. U-PVC elbow

50mm Dia. U-PVC elbow

50mmx40mm dia U-PVC elbow

25mmx20mm dia U-PVC elbow

20mmx15mm dia U-PVC elbow

15mm Dia. U-PVC tee

20mm Dia. U-PVC tee

25mm Dia. U-PVC tee

40mm Dia. U-PVC tee

50mm Dia. U-PVC tee

20mmx15mm dia U-PVC plain tee

50mm x 40mm dia U-PVC plain tee

50mm x 25mm dia U-PVC plain tee

15mm Dia. U-PVCsocket

20mm Dia. U-PVC socket

25mm Dia. U-PVC socket

40mm Dia. U-PVC socket

50mm Dia. U-PVC socket

15mm Dia. U-PVC MTA ( Brass Threaded)

20mm Dia. U-PVC MTA( Brass Threaded)

25mm Dia. U-PVC MTA( Brass Threaded)

40mm Dia. U-PVC MTA( Brass Threaded)

50mm Dia. U-PVC MTA( Brass Threaded)

15mm Dia. U-PVC FTA( Brass Threaded)

20mm Dia. U-PVC FTA( Brass Threaded)

25mm Dia. U-PVC FTA( Brass Threaded)

40mm Dia. U-PVC FTA( Brass Threaded)

50mm Dia. U-PVC FTA( Brass Threaded)

15mm PVC Ball Valve

20mm PVC Ball Valve

25mm PVC Ball Valve

40mm PVC Ball Valve

50mm PVC Ball Valve

15mm Dia. U-PVC MTA ( plain)

20mm Dia. U-PVC MTA ( plain)

25mm Dia. U-PVC MTA ( plain)

40mm Dia. U-PVC MTA ( plain)

50mm Dia. U-PVC MTA ( plain)

15mm Dia. U-PVC FTA ( plain)

20mm Dia. U-PVC FTA ( plain)

25mm Dia. U-PVC FTA ( plain)

40mm Dia. U-PVC FTA ( plain)

50mm Dia. U-PVC FTA ( plain)

U-PVC 20 x 15 mm dia brass elbow

15mm dia UPVC Brass elbow

20mm dia UPVC Brass elbow

25mm dia UPVC Brass elbow

15mm dia UPVC (coupler)

20mm dia UPVC (coupler)

25mm dia UPVC (coupler)

40mm dia UPVC (coupler)

50mm dia UPVC (coupler)

U-PVC Paste

Thread tape

15mm UPVC Clamp

20mm UPVC Clamp

25mm UPVC Clamp

40mm UPVC Clamp

50 mm UPVC Clamp

20mmx15mm dia U-PVC RS

25MMX20MM dia U-PVC RS

Supply of G.I fittings of different dia. of medium quality as per ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST).

15mm Dia. G.I socket

20mm Dia. G.I socket

25mm Dia. G.I socket

40mm Dia. G.I socket

50mm Dia. G.I socket

20mmx15mm G.I. RS.

25 mm X 20 MM G.I. R.S

40 mm G.I. RS

50 mm X 20 MM G.I.RS

50 mm Dia. G.I union

40 mm Dia. G.I union

25mm Dia. G.I union

20mm Dia. G.I union

15mm Dia. G.I union

15mm Dia. G.I elbow

20mm Dia. G.I elbow

25mm Dia. G.I elbow

40mm Dia G.I elbow

50mm Dia G.I elbow

20mm Gl Reducer elbow

25mm G.I. Reducer elbow

50mm G.I Reducer elbow

15mm Dia. G.I tee

20mm Dia. G.I tee

25mm Dia. G.I tee

25mmX20MM Dia. G.I tee

50mm Dia. G.I tee

50mm G.I. reducer Tee

20mm G.I reducer Tee

25mm G.I reducer Tee

20mm Dia. G.I S.P. ( 2",3",4",6" long)

15mm Dia. G.I S.P. ( 2",3",4",6" long)

25mm Dia. G.I S.P. ( 2",3",4",6" long)

40mm Dia. G.I S.P. 300mm length long thread

50mm Dia. G.I S.P. 300MM length

15mm Dia. G.I Plug

20mm Dia. G.I Plug

25mm Dia. G.I Plug

40mm Dia. G.I Plug

50mm Dia. G.I Plug

40mm Dia. G.I Tank Nipple

25 mm Dia. G.I Tank Nipple

50mm Dia. G.I tank Nipple

35 x 3mm M.S. Screw

Cleaning of sewerage line, septic tanks (Big & small) man hole, I.C., soak-way pit & disposing sewerage sludge & burring in a pre-digged pit near by & closing with local earth with supply of all labour, T&P, pump including hire & running charges of pumps all taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST)

Man holes

Inspection Chamber

Gresase Chamber.

Small size Septic tank.

Big size Septic Tank.

Labour charges for dismantaling of IWC/ EWC/AWC/OWC holes in brick/ conc. work supply of fitting & materials with socket & screw joints including cutting threads to pipe, pipes to length including earth work excavation of all types of soil, required scaffolding & refilling the trench after the work & fixing of pipe line in wall with clamps of providing light barriers with supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST)

Labour charges for fitting & fixing of IWC/ EWC/AWC/OWC holes in brick/ conc. work,making flooringwith CC(1:2:4) and neat cement finish with supply of fitting & materials with socket & screw joints including cutting threads to pipe, pipes to length including earth work excavation of all types of soil, required scaffolding & refilling the trench after the work & fixing of pipe line in wall with clamps of providing light barriers with supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST)

Labour charges for laying of PVC pipes and other PH materials laid on wall or under graund including dismantling , cutting holes in brick/ conc. Work supply of fitting & materials with socketand screw joints including cuttingthreads to pipe, pipes to length including eachworkexcavation of all types of soil,required scaffolding & refilling the trench afterthework andfixing of pipeline in wall with clamps of providing light barriers withsupply ofall labour ,T&P taxes etcall complete as per direction of Engineer in charge(Excluding GST)

Laying of 15mm to 25mm. Dia pipe.

Laying of 40mm to 50mm. Dia pipe.

Supplying the following HCI/PVC pipes and fittings of different dia with ISI mark (Supreme) including loading and unloading at both ends with all cost of materials,labours,T&P,,taxes,royalties etc.Allcomplete as per direction of engineering in charge. (Excluding GST)

110mm PVC Pipe

75mm PVC pipe

110mm PVC door bend

110mm PVC plain bend

110mm PVC P trap

110mm PVC S/J with door

110mm PVC D/J with door

110mm PVC offset

75mm PVC door bend

75mm PVC plain bend

75mm PVC S/J with door

75mm PVC D/J with door

75mm PVC Cowl

110mm PVC Cowl

75mm PVC Clamp

110mm PVC Clamp

Bamboo

Engagement of Hydraulic Excavator of 1cum bucket for each work excavation during execution of work including supply of operator,fuel tools and plants etc all completeas directed by engineering in charge.(Excluding GST)

Exterior painting two coats to wall surface with acrylic based weather coat paint of approved quality & shade having resistance to Fungus, Fading, including scraping, cleaning, brushing, washing the old paint, as and when required, removing the flakes applying uniformly two coats including cost and supply of all materials, labour, T&P, taxes, transportation, staging, scaffolding, etc. complete but excluding cost of GST as directed by the Engineer-in-charge. Excluding GST.

Supplying fitting fixing of 8mm thick ceramic floor tiles ( premimum Quality 300 x300 mm or 400 x 400 mm size)in 1st floor, treads or steps and landing on 20 mm thick bed of cement mortar 1:4(1cement: 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and cleaning complete including supply of all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer in charge.

Engagement of Tractor for shifting of sludge, debrises from one place to other etc. with fuel, engagement hire & running charges, cost of operator, etc. all complete as per direction of Engineer-in-charge only engagement perod will consided, no idle charge will be considered (Excluding GST).

Skater Infratech India Pvt. Ltd. (BID ID -3196143)

Manas Ranjan Pal (BID ID -3196321)

LAXMIDHAR ROUT (BID ID -3196301)

FEAG ENGINEERS AND CONSTRUCTIONS PVT LTD (BID ID -3196268)

Swanip Infracon Private Limited (BID ID -3196232)