Civil Works and Electrical works

Amount

Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Providing Auger pile Foundation of 300mm dia for a depth of 2.70m form the original ground level including auguring, materials labour chargers at an interval of 4.00 m Etc., all complete

Supplying and filling in foundation, basement, etc. with filling M-SAND in layers of not more than 15 cm thick well-watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cement concrete 1:5:10 (One of cement five of sand and ten of HBG jelly) for foundation using 40mm gauge HBG jelly inclusive of shoring strutting and baling out water where ever necessary ramming curing etc., complete in respects complying with relevant Std, Specification and as directed by the Dept, Officers.

Supplying and filling of well gravel in basement filling including conveyance loading and unloading charges and all other incidental charges filling laying watering and consolidation etc., complete as directed by the Dept., Officers with standard specification.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specification. (Payment for centering shall be given after the concrete is laid)

Footing, Grade Beam, RC Wall and Cover slab

Centering for soffits of Rcc slabs of plain surface like lintels, beams, etc., including strutting 3M high using MS sheets of size 90cmx60cm and BG 10 stiffened with MS angles of size 25x25x3mm laid over silver oak (C.W) joists of size 10x6.5cm (spaced at about 90cm c/c) and supports 75cm c/c complying with standard specification and directed 10sqm.

Plane surface

Column

RC Wall

Providing and laying position , Standardized concrete mi M-20 Grade in accordance with IS :456-2000,using 20mm and downgraded hard broken granite stone jelly for all Rcc items of works with minimum cement content of 3250 kg/cum and maximum water cement ratio of 0.55,inculding admixture (plasticizer / super plasticizer) in recommended proportions as per IS:9103 to accelerate, restart setting of concrete, improve workability without impairing strength and durability with about (5 cum)7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m)5156 kg of 10-12 mm machine crushed stone jelly and with about(4.79 cu.m)7670 kg of sand ,but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibratos, finishing, curing,etc, complete complying with standard specification and ass directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards.(No separate payment will be made by the Department for the excess usage of materials.)

For foundation and Basement

Ground floor

First Floor

Second Floor

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification.

Brick work using 2nd class ground moulded Chamber bricks size 9" x 4-3/8" x 2-3/4" including cost and conveyance of all materials and labour charges and all other incidental charges etc. complete complying with standard specification.

Foundation and Basement (C.M 1:5)

Ground floor (C.M 1:6)

First Floor (C.M 1:6)

Second Floor (C.M 1:6)

Brick work in following Cement Mortar using best quality of Second Class Table Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and basement including curing, etc., complete complying with standard specification.( Above Basement)

Brick partition walls of 11.50cm thickness using best quality II class table moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers.

Ground floor

First Floor

Second Floor

Special plastering for R.C.C. slab beam and sunshades with Cement mortar 1:3, 10mm thick including cost and conveyance of all materials and labour charges, curing etc. complete complying with standard specifications.

Plastering with Cement mortar 1:5,12mm thick including cost and conveyance of all materials and all labour charges, curing etc., complete complying with standard specifications

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification

Finishing the top of roof with one course of machine pressed tiles of size 200mm x 200mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Supplying and painting the walls with two coats of cement paint over one coat of cement primer as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work).

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first-class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Paving the floor with Rajasthan Kotta stone slabs 20mm with machine cut edges of 2'0 x 2'0 size in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-site and pointed with same colored cementneatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The Kotta stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard specification.

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.

Paving the floor with Anti-Skid step tiles of in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-site and pointed with same colored cement. complete complying with standard specification.

Paving the floor with Anti-Skid 300 x 300 x 10 mm glazed Ceramic tiles of in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-site and pointed with same colored cement. complete complying with standard specification.

Dadooing walls with Glazed tiles of sizes 300 X 450 X 8mm size of approved make and quality and color lSet in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Supplying and fixing teak wood door temple type including all materials, labour charges for manufacturing and fixing I position including all furniture fittings etc. complete with std specifications.

Supplying and fixing of Flush door shutter using Teak wood frame of size 127mm x 76mm and Door shutters Single leaf in position using 35mm thick solid core Flush shutters with teak play on both sides with teak wood lipping all-round including cost and labour for fixing the hold fasts and furniture fittings etc., complete as directed by the departmental officers complying with standard specification.

Steel Fire Rated Doors Fully Pressed steel composite light weight, single swing steel door, single leaf. Generally conforming to IS:3614 part II and BS 476 Part 22. Shutter Thickness 46mm of 1.2 mm Gi sheet with honeycomb infill, Frame: 1.66 mm thick GI Sheet/ Double rebate profile. Finish: Polyester Powder coated of PO RED/ Light Gray (RAL 703) Standard Hardware for the above. a.SS Butt/Ball bearing Hinges 4’x3’x3’mm Make: Geze3 Nos b.Panic Push bar (Sinha Point) Make: Geze3 Nos c.External Trim with 40 mm EPC Make: Gaze 1 Nos d.Anchor Bolts for fixing M10 x 100 an dummyplus 1 set. e.Vision panel, Toughened Glass, Clear Size:200x300x6mm make: Saint Gobain. f.Door closer, With Standard Arm.HeavyDuty,Make: Geze.

Supplying and fixing 40mm dia GI pipe for staircase hand Rail including labour charges for cutting, welding and Fixing with MS flats (excluding cost of flat), etc., as Directed by the departmental officers

Supplying and fixing in position Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthen ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works)

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, raw plug, etc., complete complying with standard specification.

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works)

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete complying with standard specifications

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthenware wash hand basin of size 550 x 400mm (with pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylon connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and Paving the Paver Block flooring using Rubber mould paver block ( Colour ) of standard size over the sand filling of 83mm thick, including laying Compacting with power machine including loading transportation and colour pigments of paver blocks, including cost and conveyance of all materials labouretc complete with standard specification.

Providing and fixing poly carbonate sheet(6mm thick) ribbed profile all floors including making necessary holes screws and other fixture as required complete in all respect at all floors.(Rate shall include scaffolding which shall be provided by the contractor with all the safety of the workers employed and nothing extra shall be paid on this account)

Supply and fixing in position of best Indian make white / colour glazed earthenware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masonry and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers.

ABS DOOR Specification: Providing and fixing of ABS (Acrylonitrile Butadiene Styrene) Door using factory made plain FPVC (Foamed Polyvinyl Chloride) door frame of the size 105 x 40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile metre joined with 10 Nos. of 50mm long using 80mm long screws through the frame with the help of PVC fasteners to be provided for each vertical member, stiffeners of („U‟ Channel of size 29 x 9 x 1mm, 150mm long) 3 Nos. at hinge point, frame reinforcement of („U‟ GI Channel of size 46 x 22 x 0.06mm), bottom tie rod of („U‟ GI Channel size of 15 x 15 x 1mm), the ABS Shutter of 35mm thick factory made plain pre-laminated. ABS (Acrylonitrile Butadiene Styrene) door shutter moulded in different designs, consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm, reinforced by 32 x 32mm - 2 Nos. for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of ball bearing butterfly hinges - 3 Nos. for each shutter and ISI make SS round lock complete, including cost of Materials, conveyance and all other incidental charges and labour charges for fixing the Door neatly etc., complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work

Supplying and fixing mild steel grill Gate including cost conveyance of all materials and fixing in position including priming coat etc. complete with standard specifications.

Painting new iron works such as gate, steel doors windows ventilators with two coats of approved quality and color of synthetic enamel paint over the existing red oxide primer in all floor etc., complete complying with standard specifications

Supplying and fixing Stainless Steel Health Faucet with flow Rate of 3.78 LPM at 3 Bar pressure including flexible hose 1m/1.2m long connection and holder for hand spray ,making good the same, complete. Of Engineer-in-charge.

Suppling and fixing in position 15mm.diameter brass / C.P screw down tap (heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary

Supplying and fixing in position 15mm dia C.P.Shower rose and stop cock of approved make confirming to IS specifications and quality including cost of Shellac thread etc. complying with standard specification.

Supply and fixing of PVC. Nahini / Floor Trap with stainless Steel Gratings- 100 mm x 75 mm including all charges etc, complete as per standard specification.

Internal Water Supply P.V.C. Pipes (10Kg / Sq.Cm) Supplying laying and jointing P.V.C pipes (10Kg / Sq.Cm) of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plasteringwherever necessary with necessary scaffolding charges.

20mm dia Pipe concealed water supply

25mm dia Pipe

32mm dia Pipe

40mm dia Pipe PVC

65mm dia Pipe PVC

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements

Coupler

20mm concealed

25mm dia Pipe

32mm dia Pipe

40mm dia Pipe

65mm dia Pipe

Elbow

20mm concealed

25mm dia Pipe

32mm dia Pipe

40mm dia Pipe

65mm dia Pipe

20mm concealed

25mm dia Pipe

32mm dia Pipe

40mm dia Pipe

65mm dia Pipe

20mm concealed

25mm dia Pipe

32mm dia Pipe

40mm dia Pipe

65mm dia Pipe

END CAP

REDUCER

REDUCER TEE

REDUCER ELBOW

JET NIPPLE

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

25mm Gate Valve [Gun Metal ]

32mm Gate Valve

40 mm Gate Valve

50 mm Gate Valve

65 mm Gate Valve

Supplying and fixing of approved make of GM Non return valve, suitable for both horizontal and vertical application conforming to BS 1982 tested to a pressure of 15 Kg/sq.cm. Including rubber gasket, flanges, union, nuts, bolts, washers and painting complete as required, shutter of brass/SS304 conforming to ASTM B159. as directed by Engineer-

50mmReturn Valve [Gun Metal ]

Supplying and fixing of GI. puddle flanges (IS 1239) fabricated out of 6 mm thick M.S. plate of size 300 x 300mm plus dia of pipe of 750mm long pipe pieces fixed to RCC wall of water tanks. Including painting with two coats of primer complete as required. The entire fitting shall be hot dipped galvanized.as directed by Engineer-Incharge.

40 mm dia G.I Puddle Flags

80 mm dia G.I Puddle Flags

100 mm dia G.I Puddle Flags

Supplying laying and jointing P.V.C pipes soil/ waste pipes (6Kg/Sq.Cm) of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding Charges

110mm dia PVC Pipe internal drainage

75mm dia PVC Pipe

40mm dia PVC Pipe

50mm dia PVC Pipe

Supplying PVC Specials P.V.C pipes Soil/ waste pipes (with working pressure 6 kg. / sq.cm.) in water supply arrangements (both in internal and external drainage arrangements

ELBOW

110mm PVC Pipe

75mm PVC Pipe

50mm PVC Pipe

110mm PVC Pipe

75mm PVC Pipe

50mm PVC Pipe

110mm PVC Pipe

75mm PVC Pipe

50mm PVC Pipe

110mm PVC Pipe – Y Junction

75mm PVC Pipe – Y Junction

REDUCER

110mm x 75 mm PVC Reducer

Supplying and fixing in position 150 x 100mm "P" or "S" stoneware gully trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three Crushed stone sand and Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works.

Construction of sewer chambers of internal dimension of 600x600mm depth up to 1 Mtr depth with brick masonry in cement mortar 1:5 thickness of masonry 225 mm, 1:3:6 cement concrete foundation 150 mm thick over 150 mm sand bed, channeling in 1:2:4 cement concrete, plastering in 1:3 cement mortar for internal and external surface finished with floating coat of neat cement. SFRC make Heavy duty manhole cover (600x600) with frame, I step 300mm.and fixed over 100 mm P.C.C. making arrangement for manhole cover seating, necessary excavation and backfilling.(Observed OD)

Construction of sewer chambers of internal dimension of 600x750mm depth up to 1 Mtr depth with brick masonry in cement mortar 1:5 thickness of masonry 225 mm, 1:3:6 cement concrete foundation 150 mm thick over 150 mm sand bed, channeling in 1:2:4 cement concrete, plastering in 1:3 cement mortar for internal and external surface finished with floating coat of neat cement. SFRC make Heavy duty manhole cover (600x600) with frame,CI step 300mm.and fixed over 100 mm P.C.C. making arrangement for manhole cover seating, necessary excavation and backfilling.(Observed OD)

Construction of sewer chambers of internal dimension of 600x900mm depth up to 1.2 Mtr depth with brick masonry in cement mortar 1:5 thickness of masonry 225 mm, 1:3:6 cement concrete foundation 150 mm thick over 150 mm sand bed, channeling in 1:2:4 cement concrete, plastering in 1:3 cement mortar for internal and external surface finished with floating coat of neat cement. SFRC make Heavy duty manhole cover (600x600) with frame, CI step 300mm.and fixed over 100 mm P.C.C. making arrangement for manhole cover seating, necessary excavation and backfilling.(Observed OD)

Supplying laying and jointing of UPVC Pipe (Un-Plasticized Polyvinyl Chloride)(Schedule-80) pipes complete with necessary solvent cement weldable fittings, confirming to ASTM F-441 for water supply piping in the pumping system. The pipes shall be erected plumb in the risers. Erection of the above pipe including cutting, jointing of pipes with necessary fittings, erection of the pipes plumb to vertical, clamping the pipes on to MS Hot dip galvanized clamps, pressure testing of pipes, complete.. The pipes shall be laid buried Laying work to include excavating the necessary trenches,cutting and jointing and laying the pipes in the trenches.after laying and pressure testing of pipes, the excavated earth shall be back fill and compacted any excess shall be removed from site.

50mm dia UPVC

Supplying UPVC Specials pipes (UPVC.) in water supply arrangements (external Hydro Pneumatic System Pumps arrangements)

ELBOW

50 mm UPVC

50 mm UPVC

50 mm UPVC

COUPLER

50 mm UPVC

Supplying laying and jointing P.V.C pipes soil/ waste pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to the pipes shall be duly laid at site, with necessary cutting and jointing of pipe with approved quality jointing lubricant. The pipes shall be fixed properly aligned and laid to slope. Before handing over, leak test shall be carried out and any defects found shall be rectified. Work shall also include necessary excavation and back filling 'with compaction etc, as directed by Engineer- Incharge (For sewer and Sullage line).

160mm dia PVC Pipe 6 Kg / Sqm

110mm dia PVC Pipe 6 Kg / Sqm

Supplying and fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bends, other clamps, screws nails etc., complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front and 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/Sq.Cm]

Supplying and fixing in position best quality P.V.C rainwater buried pipe (4 kg. per sq.cm) of various sizes having ISI mark and providing leakproof joints including fixing to the chamber with P.V.Cspecials etc., and making connection to all rain water chambers, dismantling masonry/R.C.C. works wherever necessary and making good the dismantled portion to the original condition, complying with standard specifications. ( 160 mm dia ) 4 Kg / Sqm

Construction of percolation well / rain water harvest pit of of required internal dimension of 1.2mtr Dia up to 2.5 Mtr depth with brick masonry in cement mortar 1:5 thickness of masonry 225 mm, 1:3:6 cement concrete foundation 150 mm thick over 150 mm sand bed, channeling in 1:2:4 cement concrete, plastering in 1:3 cement mortar for internal and external surface finished with floating coat of neat cement, With perforated RCC cover, fixed over 100 mm P.C.C, Rungs, etc. The work shall include necessary excavation and backfilling placing 2 nos of 200mm dia slotted pie for 5mtr from the bottom of the catch pit, 25mm coarse aggregate (black pebbles) for filteration.

Supply and installation of equivalent approved make, For pumping the Domestic water from sump to outreach Pumps shall deliver 15m3/hr @ head of 45mtr.,Skid mounted twin booster system with fixed speed system.1 working + 1 stand by. of Vertical open well submersible pumps mounted on a common base frame, with common galvanized delivery manifold.2no.s of isolation valve and 2nos of non return valves. Control panel – Voltmeter, ammeter, Three phase preventer, with dry run control provision.

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with metal box and 6A 1way modular Switch in flush with wall with suitable modular front plate cover for making good of the concealed portion for PVC concealed light point /fan point for Electronic Regulator) (4 Points Per Coil) (Anchor Roma/Equivalent)

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with metal box and 6A 1way modular Switch in flush with wall with suitable modular front plate cover for making good of the concealed portion for PVC concealed light point /fan point for Electronic Regulator) (5 Points Per Coil) (Anchor Roma/Equivalent)

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with metal box and 6A 1way modular Switch in flush with wall with suitable modular front plate cover for making good of the concealed portion for PVC concealed light point /fan point for Electronic Regulator) (6 Points Per Coil) (Anchor Roma/Equivalent)

Wiring with 3x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with metal box and 6A 2way modular Switch in flush with wall with suitable modular front plate cover for making good of the concealed portion for PVC concealed stair case light point (Anchor Roma/Equivalent)

Supply and fixing of 2x2 LED Flat Pannel Fitting Havel’s 2x2 PLS-42W-LED-857S with TW round blocks on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting

Supply and fixing of single box type 4'40 W LED with conduit pipe suspension from the celling with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of fancy glass shade and 9W LED Bulb

Supply and fixing of LED WT Bulk head fitting PRBH - 15W with connection

Supply and fixing of single box type 4'20 W LED fitting with TW round blocks on wall or celling with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of Havells LED Low Bay 50W Fitting with MS Clamp Set with Bolt and Nut and to be suspended with SS Chain 32 mm width with End Hooks with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of Havells JETAALBA - FLOOD LIGHT -70W LED Fitting with Necessary Wall Grouting clamps with Fixing bolts on ceiling with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of Havells VILUMINA S-L30W-LED 757-PASYBOPC street light fitting with 32mm dia GI pipe (Class 'B') with 1 No. 32mm GI bend complete on the existing post wall with PVC unsheathed copper leads MS clamps and aluminium painting

Supply and fixing of Double pole sheet steel enclosure with 1 no 30 A DP isolator on wall and necessary connection.

Supply and fixing of 1200 mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator, with 1 metre down rod on existing clamp

Supply and fixing of 1400 mm (56") sweep AC ceiling fan complete with stepped electronic 300W regulator, with 1 metre down rod on existing clamp

Supply and fixing of 300 mm (12") sweep light duty AC exhaust fan complete without provision of hole in the wall

Supply and fixing of 375 mm (15") sweep heavy duty AC exhaust fan complete without provision of hole in the wall

Supply and fixing of louvers shutters arrangements for 300 mm (12") sweep (light duty) AC exhaust fan.

Supply and fixing of louvers shutters arrangements for 375 mm (15") sweep (light duty) AC exhaust fan.

Supply and fixing of 450MM 18" Almonard Walla Fan on wall with connection.

Supply and fixing of 1 no 3 modular metal box with 1 no 3 modular plate. 1 no 6 A switch, 1 no 6A socket, in flush and making good of the concealed portion (Anchor roma /Equivalent)

Supply and fixing of 1 no 4 modular metal box with 1 no 4 modular plate. 1 no 16 A switch, 1 no 16A socket,1 in flush and making good of the concealed portion. (Anchor roma /Equivalent)

Supply and fixing of 25A MCB protected Socket in MS Enclosure Concealed in wall with connection

Supply and fixing of 3 Nos. 5Amps (3 Pin and 2 Pin) combined flush type wall socket with control switches concealed in suitable TW Box in flush with wall wand covered with 3mm thick hylem sheet with earth connection (for computer plug socket)

Supply and run of 2 of 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour

Supply and run of 4 of 10 sq.mm (140/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour

Supply and run of 4 of 16 sq.mm (101/0.45) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour

Supply and laying of 4 x 10 sq.mm PVC LTUG aluminiumarmounred cable in a trench to be excavated at a depth of 0.75 meter putting 0.15 meter layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and clamping of 4 x 10 sq.mm PVC LTUG aluminiumarmounred cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 4 x 10 sq.mm PVC LTUG aluminiumarmounred cable with earth connection

Supply and fixing of 32A TPN metal clad switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing.(Motor)

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure Distribution board with 1No 32 Amps DPMCB as incoming and 8 Nos 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (Like Legrand/Hager make).

Supply and fixing of vertical type 8 way triple pole neutral MCB distribution board with Metal/Acrylic Door cover with IP42 Protection, with 63A 30mA Sensitivity RCCB, 1 no 63A 4 Pole isolator and 15nos 6A to 32A SP MCB 4no 32A TP MCB as Outgoing in flush with wall and making good of the concealed portion earth connection only. The MCB DB and MCB's should be with ISI mark (like Legrand make)

Supply and fixing of vertical type 8 way triple pole neutral MCB distribution board with Metal/Acrylic Door cover with IP42 Protection, with 63A 30mA Sensitivity RCCB, 1 no 63A 4 Pole isolator and 12nos 6A to 32A SP MCB 3no 32A TP MCB as Outgoing on wall with angle iron frame work with earth connection only. The MCB DB and MCB's should be with ISI mark (like Legrand make)

Supply and fixing of vertical type 4 way triple pole neutral MCB distribution board with Metal/Acrylic Door cover with IP42 Protection, with 125A MCCB 4 Pole as incoming and 4 Nos 63A TP MCB as outgoing on wall with Angle iron frame work with earth connection only. The MCB DB and MCB's should be with ISI mark (like Legrand make)

Supply and fixing of vertical type 4 way triple pole neutral MCB distribution board with Metal/Acrylic Door cover with IP42 Protection, with 63 A 4 Pole MCB isolator as incoming with and 3 Nos 32A TP MCB and 3 Nos 6 A to 32A SP MCB as outgoing on wall with Angle iron frame work with earth connection only. The MCB DB and MCB's should be with ISI mark ( Mortar Load )

Supply and fixing of Havells 100A on -Load Change over switch IHCNFE0100 with enclosure and one No Havells 100A Switch disconnector Fuse panel mounted cubical Type IHKDTW4100 on suitable angle iron frame work with cable Entry boxes with earth connection.

Supply and laying of 3 1/2 x50sqmm PVC LTUG aluminiumarmounred cable in a trench to be excavated at a depth of 0.75 meter putting 0.15 meter layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and clamping of 31/2 x 50 sq.mm PVC LTUG armoured cable on post or wall with MS clamps

Supply and fixing of Brass cable gland for 31/2 x 50 sq.mm PVC LTUG armounred cable with earth connection.

Supply and clamping of 31/2 x 50 sq.mm PVC LTUG armoured cable through 65mm GI pipe on post or on wall with MS clamps.

Supply and providing cable end termination of 3-1/2 x 50 sq.mm PVC LTUG aluminiumarmoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry .

Supply and fixing of 3 Phase 100A aerial fuse unit for 3 Nos 100A fuse units (500V) on suitable MS sheet covered with6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps.

Supply and run 25mm x 3mm tinned copper flat with necessary clamps/supports on wall / floor/ ground for earth connection.

Supply and fixing of 3 Compartment Pannel (made up of 16 SWG Sheet) with Lock and keys with view Glass arrangements for obtaining the EB supply having Bus bar Chamber with 25mm x 3mm copper flat for in/out Cable connection and 3 Nos 100A Fuse unit with 1 No 100A Neutral link with the provision for fixing the EB meter and cable entry boxes with necessary connection.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board with 1No 32 Amps DP MCB Isolator as incoming and 4 Nos 6 Amps to 32 Amps SPMCBs outgoing on suitable angle iron frame work with earth connection only. The MCB DB and MCB's should be with ISI mark (Like Legrand/Hager make) (Street light control).

Supply and run of 4 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour

Supply and fixing of 6 metre length single Bracket Pole with Base plate (250x250x6mm) 76.10mm OD x 3.65mm thick x 6000mm Length with concreting and construction of masonry pedestal with MS box of 30cm x 20cm x 10cm with angle iron frame work with door and lock and key arrangements with supply and fixing 48W LED street light fitting with LED and with supply and fixing of 1 No. 16A fuse unit (500V) and 5A SP switch inside the MS Box with PVC unsheathed leads and painting of suitable colour.

Supply and fixing of brass cable gland for 2 x 10 sq.mm PVC LTUG aluminiumarmoured cable with earth connection

Supply and laying of 2 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of M. Sand and covering the cable completely with bricks and M. Sand and refilling the earth to make good.

Supply and clamping of 2 x 10 sq.mm PVC LTUG armoured cable through suitable 32 mm GI pipe on post or on wall with MS clamps

Supply of 1 No 82.5 KVA Diesel Generator set of 0.8 P.F Three Phase 415 / 420 Volts, 50c/s, 1500 RPM as detailed below Genset model KG1-82.5WS KOEL i-Green D.G. Genset . A.ENGINE KOEL make Engine Model 4R1040TA G1(meeting emission and noise complaint) CPCB II ) Water cooled diesel engine suitable for Generator application with a shaft output of 310 BHP 1500 RPM under NTP conditions as per BSS 5514 / IS 10000. The Engine shall comprise the following standard scope of supply: (Make Kirloskar Green / Cummins) ( SR )1.Dry Type Air Cleaner 2.Expansion bellow 3.Radiator, Radiator fan and mounting 4.Air to air charge 5.Exhaust Gas turbo charge 6.Lube oil cooler and Lube oil filter 7.Fuel filter (pre and Micro) 8.In-line Mono - block fuel injection pump with governor and fuel feed pump. 9.Electronic governor 10.12 V Battery charging alternator 11. 12V Volt electric starter motor 12. Engine test Certificate 13. Residential Muffler 14. Fly Wheel with Housing 15. Exhaust silencer

SAFETY SYSTEM OF ENGINE The Engine shall trip for the following conditions with visual alarm device 1. Low lubricating Oil Pressure 2. High water temperature 3. Vee-belt failure and over speed The following visual indicator should also be provide Low Battery Indication. The Engine should be capable of providing 10% over load for one hour for every 11 hours continuous running at full load .

B.ALTERNATOR: Alternator capacity of 82.5KVA / 50KW, AC 3 phase, 50HZ, 415Volts, 0.8 P.F 4 wire self excited, self regulated designed to run at 1500 RPM under NTS conditions conforming to BS 5514 / ISO 3046/ISO 8528 (part-II) 1992 to be coupled directly to the Diesel Engine and test certificate (Make Kirloskar Green / Cummins)

30) Hooter/Audio alarm for indication set fails to start and for DG O/L 31) 1set timers 32) Audio and visual indication arrangements for a) Low lubricating oil pressure b) High water temperature c) Over speed 33) 1No Earth fault relay 34) Isolator to Isolate the neutral Note : 1. The control panel should be complete with necessary fuses, cables, labels, other accessories with neutral isolation arrangements. 2. The engine should trip for the following conditions. a) Low lubricating oil pressure b) High water temperature c) Over speed 3.Supply and fitment of Auto mains failure panel 1EB service with 125Amps switch and contactors SUF control relays timers etc.

D. ACOUSTIC ENCLOSURE Acoustic enclosure shall be powder coated and fabricated of 16 SWG CRCA MS sheet. The Silent canopy shall be of nut bolt type construction. Critical processes of punching are done on CNC machines to maintain dimensional accuracy of hole within 0.1mm Power coating done after seven - tank surface preparation process of sheet metal. Canopy panel and doors shall have inside lining of FIRE RETARDANT 64 kg/ m density Mineral wool of 100mm thickness as acoustic material. Four hinged doors shall be provided to canopy. The average sound level at 1 Mt . Distance shall be less than 75 dB average or as per CPCB norms

E. BASE FRAME Base frame should be fabricated in sheet metal. The base frame is rugged in construction and designed for mounting engine and brush less alternator closely coupled, with cross members mounted on AVM The base frame shall be provision for mounting of acoustic enclosure on it. The supply of Gen set includes loading, unloading and transportation charges.

F. FUEL TANK 150 Liters. Integral Built in Fuel tank shall be fabricated out of 14SWG CRCA MS sheet and its part of base frame. It is duly painted and fitted with inlet and outlet connections and mechanical fuel gauge.

G. BATTERY 1 No 12V 150 AH Batteryh. Supply of maintenance manual books with engine and alternator Parts list. i. Supply of tools required for the Maintenance and operations of the Generator set. j. Mounting of starting batteries of 1/2" thick hylem sheet base with suitable angle iron frame work support on the floor by the side of generator set to conform to latest CEIG conditions. k. Supply and laying of annunciation cable of suitable capacity and length between engine and the control panel of the generator set / Rate for item (a) to (k)

Supply and installation of exhaust piping of sufficient length with suitable MS pipes so as to extended outside the generator room with necessary thermal insulation. (MR)

Supply of lubricating oil and first charging of starting battery and supply of 120lts diesel to run the genset for minimum of 8 hours.

Supply, erection,testing and commissioning of 1.5 Ton (4500 K.Cal/Hr) ABS Plastic split type Air conditioner confirming to is : 1391(part 2) 1992 Amdt No.1 to 2 fitted with Rotary compressor operating Refrigerant R.22/ Non CFC suitable for wall mounting for operating on 230 voltrs, 50 HZ single phase AC supply with star rating of 3 as per BEE specification and The installation works for the above split type AC units includes the followings. Mounting/fitting in door and out door units at the respective locations.1. Laying Refrigerant pipe line of required length connecting both units after drilling hole/holes in the wall if required. Thickness of copper tubing shall not be less than 0.7mm. 2. Insulating the suction pipe with expanded polyethylene foam 5 mm tubing. 3. Laying 15mm dia Flexible PVC drain pipe to throw out. The condensate water being formed within Indoor unit 4. Leakage testing the entire system with outdoor unit stand capable of performing the functions of 1) Cooling 2) De humidifying 3) Air circulating 4) filtering 5.Charging Refrigerant gas in the unit. 6. Suitable electric wiring to be provided with 2.5 sq.mm. PVC insulated copper wire between indoor and out door units up to 6 meters length and up to Switch within 3 meters of location of in door Unit. (Carrier/voltas) (DGS & D Rates)

Renewal by supply and installation of 4.0 KVA Electronic Automatic voltage stabilizer V-Guard Make with input voltage Range of 170 volt to 270 volt and output voltage range 200 volts to 240 volts with High and low voltage cut off and 3 minutes time delay relay with demonstration. The installation works for the above split type AC units includes the followings. Mounting/fitting in door and out door units at the respective locations.

Supply, erection,testing and commissioning of 2.0 Ton (4500 K.Cal/Hr) ABS Plastic split type Air conditioner confirming to is : 1391(part 2) 1992 Amdt No.1 to 2 fitted with Rotary compressor operating Refrigerant R.22/ Non CFC suitable for wall mounting for operating on 230 voltrs, 50 HZ single phase AC supply with star rating of 3 as per BEE specification and capable of performing the functions of 1) Cooling 2) De humidifying 3) Air circulating 4) filtering. 1. Laying Refrigerant pipe line of required length connecting both units after drilling hole/holes in the wall if required. Thickness of copper tubing shall not be less than 0.7mm. 2. Insulating the suction pipe with expanded polyethylene foam 5 mm tubing. 3. Laying 15mm dia Flexible PVC drain pipe to throw out.The condensate water being formed within Indoor unit. 4. Leakage testing the entire system with outdoor unit stand. 5. Charging Refrigerant gas in the unit. 6. Suitable electric wiring to be provided with 2.5 sqmm. PVC insulated copper wire between indoor and out door units up to 6 meters length and up to Switch within 3 meters of location of in door Unit. (Carrier/voltas) (DGS & D Rates)

Renewal by supply and installation of 5.0 KVA Electronic Automatic voltage stabilizer V-Guard Make with input voltage Range of 170 volt to 270 volt and output voltage range 200 volts to 240 volts with High and low voltage cut off and 3 minutes time delay relay with demonstration

Supply and fixing 1000W automatic electric water heater of 25 liters capacity suitable for 230V 50 c/s AC supply on suitable MS clamps with 3 core flx wire, but without plumbing work

Supply and fixing of 100A TPN sheet double break switch with HRC fuse and neutral on suitable angle iron frame work with MS cable entry boxes and with PWD earthing

Supply and laying of 2 x 10 sq.mm PVC armoured LTUG cable in suitable GI Pipe a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of M.Sand and covering the cable completely with bricks and M.Sand and refilling the earth to make good.

63 A Light DB as per

Supply and run of 4 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth Wire connection of 14 SWG TC wire with painting of suitable colour

Supply and fixing of 1 nos 1 Module 2 way 16 A Switch in suitable Teek wood box covered with one module cover plate in flush with wall and Making good

Providing suitable concrete foundation with cement concrete 1:2:4 of height 5 feet with sand cushion all around the foundation and erection of generator set with proper alignment over the existing foundation

Preparation of Site plan, physical layout electrical schematic diagram (6 Sets) getting drawing approval from CEIG, preparation of completion report rectification report etc. arranging CEIG inspection, paying CEIG inspection fees and obtaining safety certificate from CEIG

Design, Engineering, supply, fabrication, erection, testing, commissioning and handing over of 1No 13 person capacity passenger lift Gearless with machine room (KONE / OTIS / JOHNSON) as per the following Technical specifications with free Guarantee period of one year from the date of commissioning

17.Car fitting: Glare free LED lighting with 300mm sweep cabin fan with elegant ok and with comfortable ventilation inside the car. 18.Lift well: R.C.C. construction with brick masonry 19.Indication: UP/Down digital direction and position indicator for all landing and in car 20.Emergency alarm bell: Battery operated alarm bell to be provided with Automatic charging device 21. Emergency light: Battery operated light to be provided with Automatic charging device 22.Fire Man’s switch: To be provided at ground floor 23.Minor builders work: included in the scope. 24.Scaffolding: Included in the scope 25.Sill angles and facia plates: included in the scope. 26.Steel for lift machinery: Included in the scope 27.Servicing and maintenance: Free comprehensive servicing and maintenance should be provided by lift contractor during the guarantee period of one year. 28.Automatic Rescue device: To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consist of suitable type battery system with charger, inverter, under voltage protection system etc., complete with all accessories.

29.Provision of intercom with phone: To be provided by lift contractor with one handset in the lift car and another handset in the lift machine room with telecom exchange unite with one trunk and three extension linked proton 103 matrix telecom unit and required length of single twisted pair with thickness of 0.5 mm to 1 mm connecting the handsets and telecom exchange unit. 30.Lift License: Preparation of Drawing, payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate as per lift act should be done by lift contractor 31.Floor annunciator with music. 32. Special features: a. Infra red door sensor 2D with full height screen. b. Full width half height rear panel mirror. c. Tubular stainless steel hand rail in cars. d. Voltage stabilizer for circuit control. e. Stainless. Steel signal fixtures. f. Vandal proof S.S. Button with S.S. cover g. SS door frames for landing doors. h. VF door operator. i. Call Register signal j. Stainless steel facia plate for car operating panel and landing fixtures. k. On – Off switch for fan and light l. Over load warning indicator with audio announcement

33. Other standard features: Over speed governor, phase failure and phase reversal relay, T. Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate capacity, electro mechanical door locks emergency key side supporting angles, motor over load protection devices final limit switch main suspension ropes counter weights lifting joist for mounting the machineries 34. Guarantee: Guarantee for the materials and workmanship of equipment’s complete should be offered by lift firm for a period of not less than one year. 35. Site testing in accordance with IS 14665 should be carried out at the time of handing over. 36. Supply of operation and maintenance manual with necessary tools for operation

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5 A FT switch with painting of suitable colour for open PVC light point / fan point ( for electronic regulator) ( 5 points per coil )

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x 100 x 113 TW Switch box for 5A 3 pin non inter locking wall socket with 5 A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC Plug point .

Supply and fixing of 32 A TPN metal clad switch on suitable angle iron frame work with M.S cable entry boxes with PWD earthing

Supply and fixing of WT bulk head fitting with guard suitable for 9 W LED bulb

Supply and clamping of 3 ½ x 25 Sq.mm. PVC LTUG armored cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 3 ½ x 25 Sq.mm LTUG armoured cable with earth connection

Sub total

GST in 18%

SRI VENKATESHWAR ENGINEERING CONTRACTORS