Annual Work For Different Dia Pipe line and Sluice Valve Repairing Work at Gambhir line Section Ujjain.

Amount

Hire charges of J.C.B. machine for excavation in tranches including dressing for searching and opening of leakage in 300 to 750 mmØ C.I./P.S.C./D.I./M.S. including making of water diversion trench near leakage site for dewatering arrangement, and for holding of pipes alignment for proper repairing works, with lifting and taking out the damaged pipe from trench etc.

Dewatering Arrangment I/c fixing of low head high discharge mud pump with suction of delivery pipe as required

Manufacturing of specials and pipes made out of steel plant of HR coils 5mm to 8mm thick plate in shape and size condition i/c cast of steel plate & other electricals & mechenicle material i/c suberged are welding i/c cost of transportation, loading & unloading complete .pipe and speacials barrel piece,gap piece,spigot& socket end, plain and socket clamp etc as per site condition

Chamaring cast iron ductile iron pipe of all type & classes to make suitable for tyton joints

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

400 mm dia

450 mm dia

Jointing of socket & spigot cast iron (spun yarn) pipe and special call LA"a" & B i/c labour and cast of material i/e (pig lad & spun yarn) etcand testing complete

300 mm dia

Cutting of M.S./C.I./D.I.Pipe with electric Arch machine.80 mm dia

Cutting of M.S./C.I./D.I.Pipe with electric Arch machine.100 mm dia

Cutting of M.S./C.I./D.I.Pipe with electric Arch machine.150 mm dia

Cutting of M.S./C.I./D.I. Pipe with electric Arch machine.200 mm dia

Cutting of M.S./C.I./D.I. Pipe with electric Arch machine.250 mm dia

Cutting of M.S./C.I./D.I.Pipe with electric Arch machine.300 mm dia

Cutting of M.S./C.I./D.I. Pipe with electric Arch machine.350 mm dia

Cutting of M.S./C.I./D.I.Pipe with electric Arch machine.400 mm dia

Cutting of M.S./C.I./D.I.Pipe with electric Arch machine.450 mm dia

Hire charges for Diseal Generator set/Electric connection from Electric pole for cutting, welding of M.S. pipe and dewatering work and lighting arrangement etc. complete.l

Providing and fixing of GI Wire Rope 6 mm thick PVC Cover Cable Level Indigator in use at Gambhir line section

Charges for lighting,Barricading and traffic diverting from leakage site with safety arrangement during leakage repairing work. i.e. fixing of bulli, coir rope halogen lamp caution board, caution flange for the traffic diversion and removing all these materials after completion of work from site i/c. loading, unloading and transportation etc. 1 days x 12 month

Manufacturing/ providing and fixing of spigot & Socket end, machine end as per site condition suitable for 205/300/400/500/520/600/620/700/750 mm dia pipe and specials etc.(as per IS-3589-2001 or its letter revision/ amendment)

Providing and fixing Gland rope 6 mm dia as per I.S.-5414-1995 make champion/ Turner/ Equivelent

Providing and fixing Gland rope 10 mm dia as per I.S.-5414-1995 make champion/ Turner/ Equivelent

Provision for making arrangement for electricity from MPSEB to rum welding transformer, dewatering pump,& grinding machines, lamps etc. complete at site.

Manufacturing and supply of M.S. valve opening key in following size of sluice valve made out by single piece. As per standard & site conditions. 150 mm dia

Manufacturing and supply of M.S. valve opening key in following size of sluice valve made out by single piece. As per standard & site conditions. 300 mm dia

Manufacturing and supply of M.S. valve opening key in following size of sluice valve made out by single piece. As per standard & site conditions. 500 mm dia

Providing and fixing of Neoprence rubber sheet 3 & 6 mm as per I.S.-638-1979 Make-TRPL/National/Equivelent

Providing and fixing of Nut Bolt ,washer,size as per Requirement as per I.S.-1363-1992 & I.S.-4218 part -5-1967 Make Tata/ GKW/ standard/ Equivelent

Painting work of MS pipe line by best quality oil paint

Labour charges for opening and refitting of following dia.(SV) valve for oiling & greasing work. I/C excavation of pit as per site requirement or cleaning work of chamber and cutting of old rusted nut bolt with by chisel or gas cutter opening refitting of spindle rod, GM check nut gate etc. providing and fixing of new nut bolt with washer gland rope, rubber packing etc. fixture, check nut guide work. Continuous dewatering by pump during the work trial and testing after the completion of work i/c the cost of grease, transportation of the T&P and all labour with risk cover. Complete job work.

500 m.m. dia s/v

450 m.m. dia s/v

400 m.m. dia s/v

300 m.m. dia s/v, Butterfly

250 m.m. dia s/v

200 m.m. dia s/v

150 m.m. dia s/v

100 m.m. dia s/v

80 m.m. dia s/v

Repairing of honda pump GH 200 line Section I/c all matrial such as connecting rod, Piston block, bearing, bearing kit, plug ,oil seal, water seal, wheel ETC Servicing and labour cop.

Providing & fixing of Pressure Gauge meter 0.0 to 10-14 Kg/Cm2 Size 150 mm dia with pressure control tube,nut volt,socket, GI Nipple,with GM Valve 150mm dia etc Complete Work

labour Charges Only for fitting with Socket welding,pipeline bore GM valve Fitting etc Complete Fitting Work Trial & Testing Leakage Proof

Labour Charges only for Repairing of 300 mm dia butter fly valve at water tank inlet & outlet line cutting of old rusted nut bolt & 300 mm dia verticle horizontal CI Pipe Line By Gas Cutter Dismentling at Damaged 300 mm dia butter fly valve machining,welding of gear threading of valve & refitting of butter fly valve new nut bolt & Welding of pipe complete T&P Testing Labour Charges

Customer Connection trench for old 150 mm dia C.I. pipeline with clamp, feul, nipple, elbo, union & 5 mtr 20mm, 25mm, 32mm dia, etc M.D.P. pipe/U.p.v.c. pipe, G.I. pipe, as per side required customer i/c labour and material with T&P plumber supervision charges complete job work after testing i/c transportation back filling by excavation material.

Manufacturing & Supply for water level float for indigator of over head tank gambhir line section Zone I/c Labour Charges & all Material Complete Steel Float unbreacable, rust proof Size 400 MM Dia

Fabrication & Providing of Extra Long About 3 mtr MS key as per Sample made by MS ROD 25mm thick & MS Cap Molded on the Sluice Valve Spindle & Grouting 50x50x5 Mm angle Clamp in the Chamber Wall Sluice Valve open & Close work at Gambhir Line Section .

Providing of different size ISI mark CID Joint with MS nut bolt & rubber ring complete As per IS 8794/88 as below size 80 mm dia class 10

Providing of different size ISI mark CID Joint with MS nut bolt & rubber ring complete As per IS 8794/88 as below size 80 mm dia class 15

Providing of different size ISI mark CID Joint with MS nut bolt & rubber ring complete As per IS 8794/88 as below size 100 mm dia class 10

Providing of different size ISI mark CID Joint with MS nut bolt & rubber ring complete As per IS 8794/88 as below size 100 mm dia class 15

Providing of different size ISI mark CID Joint with MS nut bolt & rubber ring complete As per IS 8794/88 as below size 150 mm dia class 10

Providing of different size ISI mark CID Joint with MS nut bolt & rubber ring complete As per IS 8794/88 as below size 150 mm dia class 15

Providing of different size ISI mark CID Joint with MS nut bolt & rubber ring complete As per IS 8794/88 as below size 200 mm dia class 10

Providing of different size ISI mark CID Joint with MS nut bolt & rubber ring complete As per IS 8794/88 as below size 200 mm dia class 15

Providing of different size ISI mark CID Joint with MS nut bolt & rubber ring complete As per IS 8794/88 as below size 250 mm dia class 10

Providing of different size ISI mark CID Joint with MS nut bolt & rubber ring complete As per IS 8794/88 as below size 250 mm dia class 15

Providing of different size ISI mark CID Joint with MS nut bolt & rubber ring complete As per IS 8794/88 as below size 300 mm dia class 10

Providing of different size ISI mark CID Joint with MS nut bolt & rubber ring complete As per IS 8794/88 as below size 300 mm dia class 15

Providing & Supplying the ductile iron mechanical joint collar with following glands confiring ti IS 9523/2000 in nominal diameter sized with external bitumen coating and internal cement motor lining i/c rubber ring and nut-bolt as per requirement

100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

400 mm dia

Providing and fixing i.e. replacement of G.M. check nut in following size of sluice valve made out by single piece. 80 mm dia

Providing and fixing i.e. replacement of G.M. check nut in following size of sluice valve made out by single piece.100 mm dia

Providing and fixing i.e. replacement of G.M. check nut in following size of sluice valve made out by single piece. 150 mm dia

Providing and fixing i.e. replacement of G.M. check nut in following size of sluice valve made out by single piece. 200 mm dia

Providing and fixing i.e. replacement of G.M. check nut in following size of sluice valve made out by single piece. 250 mm dia

Providing and fixing i.e. replacement of G.M. check nut in following size of sluice valve made out by single piece. 300 mm dia

Providing and fixing i.e. replacement of G.M. check nut in following size of sluice valve made out by single piece. 350 mm dia

Providing and fixing i.e. replacement of G.M. check nut in following size of sluice valve made out by single piece. 400 mm dia

Providing and fixing i.e. replacement of G.M. check nut in following size of sluice valve made out by single piece. 450 mm dia

Repairing of following dia sluice valve Ci fixture chek nut catcher(guide) both side i/c welding,boring,threading&clamping finishing cutting as per size of chek nut

150 mm dia

200mm dia

250 mm dia

300mm dia

labor charges opening and refitting of following dia sluice valve i/c cutting of old damaged nut bolt,removal of damaged gland packing,rubber paking, providing,fixing of new by fabricated parts and greasing properly, cost of nut bolt, over handling the valve transportation of material t&P testing and making with risk cover

150 mm dia

200mm dia

250 mm dia

300mm dia

Labour for leakage repairing including all work as per site condition including alignment of barrel/ pipe cleaning of exposed portion of socket and pipe i/c hire charges of skilled and unskilled labour for complete job. 80 &90 mm ACP/PVC

Labour for leakage repairing including all work as per site condition including alignment of barrel/ pipe cleaning of exposed portion of socket and pipe i/c hire charges of skilled and unskilled labour for complete job. 100 &110 mm ACP/PVC

Labour for leakage repairing including all work as per site condition including alignment of barrel/ pipe cleaning of exposed portion of socket and pipe i/c hire charges of skilled and unskilled labour for complete job. 150 &160 mm ACP/PVC

Labour for leakage repairing including all work as per site condition including alignment of barrel/ pipe cleaning of exposed portion of socket and pipe i/c hire charges of skilled and unskilled labour for complete job. 200 mm ACP/PVC

Labour for leakage repairing including all work as per site condition including alignment of barrel/ pipe cleaning of exposed portion of socket and pipe i/c hire charges of skilled and unskilled labour for complete job. 250 mm ACP/PVC

Labour for leakage repairing including all work as per site condition including alignment of barrel/ pipe cleaning of exposed portion of socket and pipe i/c hire charges of skilled and unskilled labour for complete job. 300 &315 mm ACP/PVC

Labour for leakage repairing including all work as per site condition including alignment of barrel/ pipe cleaning of exposed portion of socket and pipe i/c hire charges of skilled and unskilled labour for complete job. 80 mm C.I./D.I./M.S

Labour for leakage repairing including all work as per site condition including alignment of barrel/ pipe cleaning of exposed portion of socket and pipe i/c hire charges of skilled and unskilled labour for complete job. 100 mm C.I./D.I./ M.S.

Labour for leakage repairing including all work as per site condition including alignment of barrel/ pipe cleaning of exposed portion of socket and pipe i/c hire charges of skilled and unskilled labour for complete job. 150 mm C.I./D.I./ M.S.

Labour for leakage repairing including all work as per site condition including alignment of barrel/ pipe cleaning of exposed portion of socket and pipe i/c hire charges of skilled and unskilled labour for complete job. 200 mm C.I./D.I./ M.S.

Labour for leakage repairing including all work as per site condition including alignment of barrel/ pipe cleaning of exposed portion of socket and pipe i/c hire charges of skilled and unskilled labour for complete job. 250 mm C.I./D.I./ M.S.

Labour for leakage repairing including all work as per site condition including alignment of barrel/ pipe cleaning of exposed portion of socket and pipe i/c hire charges of skilled and unskilled labour for complete job. 300 mm C.I./D.I./ M.S.

Labour for leakage repairing including all work as per site condition including alignment of barrel/ pipe cleaning of exposed portion of socket and pipe i/c hire charges of skilled and unskilled labour for complete job. 400 mm C.I./D.I./ M.S.

Labour for leakage repairing including all work as per site condition including alignment of barrel/ pipe cleaning of exposed portion of socket and pipe i/c hire charges of skilled and unskilled labour for complete job. 450 mm C.I./D.I./ M.S.

Labour for leakage repairing including all work as per site condition including alignment of barrel/ pipe cleaning of exposed portion of socket and pipe i/c hire charges of skilled and unskilled labour for complete job. 500 mm C.I./D.I./ M.S.

Providing and fixing Rubber ring 80 mm dia

Providing and fixing Rubber ring 100 mm dia

Providing and fixing Rubber ring 150 mm dia

Providing and fixing Rubber ring 200 mm dia

Providing and fixing Rubber ring 250 mm dia

Providing and fixing Rubber ring 300 mm dia

Supply of SS 410 Spindle Rod for following dia sluice valve

80 mm dia

100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

400 mm dia

500 mm dia

600 mm dia

Supply of Wooden Handle hand make for spread & Axxis

Labour Charges for Shaftning of Chisel, Axxis & Digging Rod

Cutting of bituminious road

Cutting of M-20 Cement concrete road

Bidder Name

Amount

P M B S TRADERS(GSTN-NA)

GAURAV ENGINERING(GSTN-NA)

P M B S TRADERS

P M B S TRADERS