Widening and Strengthening of Meerut-Badaun road (SH-18) Bulandshahr Aabadi portion in Km 72.00 to 78.000 (Length 6 Km) in District Bulandshahr

Amount

Construction of embankment with approved material obtained from borrow pitsfrom 2.00 Km lead with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2. MORT&H Specification 305 Sr No 3.18.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. MORT&H Specification 406 Sr No 4.14..Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC and ordinary Portland Cement @ 1 % By weight of Mix and 3.5 % Emulsion SS2 By weight of Mix in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the designed ITS (Indirect Tensile Strength)..Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Providing and applying tack coat with vg-10 bitumen using bitumen pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. MORT&H Specification 503 .Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Providing and laying dense graded bituminous macadam grading -1 with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with vg-40 bituminous binder @ 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects..Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Providing and laying dense graded bituminous macadam grading -2 with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with vg-40 bituminous binder @ 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects..Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Providing and applying tack coat with vg-10 bitumen using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. MORT&H Specification 503 .Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with VG-40 bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Dismantling of flexible pavements (Bituminous Courses) and disposal of dismantled materials up to a lead of 1000 m, stacking serviceable and unserviceable materials separately as per Technical Specification Clause 202 S.No.2.05(A).Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Dismantling of flexible pavements (Granular Courses) and disposal of dismantled materials up to a lead of 1000 m, stacking serviceable and unserviceable materials separately as per Technical Specification Clause 202 S.No.2.05(B).Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade on M-15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409 S.No.8.01.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Construction of median and Island above road level with approved material brought from borrow pits, spread, sloped and compacted as per clause 408.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Plantation of shrubs and plants of approved species in the median. apart from cutting off glare from vehicle coming from opposite direction, these plants provide a pleasant envoirenment and are eco-friendly. The rate for this item is available in the chapter 11 on horticulture. Providing and erecting an anti - glare screen with 25 mm dia vertical pipes fabricated and framed in the form of panels of one metre length and 1.75 metre height fixed with circular vane 250 mm dia at top and rectangular vane 600 x 300 mm at the middle, made out of steel sheet of 3 mm thickness, end vertical pipes of the panel made larger for embedding in foundation concrete, applying 2 coats of paint on all exposed surfaces, all as per approved design and drawings.S.No.8.26.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces as per clause 803 sr no.8.08.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Plain Cement Concrete (grade M 15) in Open Foundation complete as per Drawing and Technical Specifications clause 1500,1700&2100 sr no.12.08.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

RCC Grade M20 using batching plant transit mixer & Concrete pump MORT&H Specification 1500,1700 & 2200 Sr No 13.05.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications MORT&H Specification 1600,2200 Sr No 13.6.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of cement concrete (M-15), wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres clause 202 sr no.2.04.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Plain Cement Concrete (grade M 15) in open foundation complete as per drawing and Technical Specifications clause 1500,1700&2100 sr no.15.11.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

RCC Grade M25 using batching plant transit mixer & Concrete pump MORT&H Specification 1500,1700 & 2100 Sr No 15.11.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications MORTH 14.04(2702).Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications MORT&H Specification 1600,2200 Sr No 13.6.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Providing & fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing & Technical Specification clause 2605 sr no.15.22 (ii) .Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 110 mm dia PVC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications clause 2706 & 2200 sr no.15.14.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Drainage Spouts complete as per drawing and Technical specification clause 2705 sr no.15.17.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Providing and laying pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specification clause 2504 sr no.16.04.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Sand Filling in foundation trenches as per drawing and Technical specification clause 304 sr no.15.03.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification sr no.15.24.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and Technical Specifications clause 1300&2200 sr no.15.07.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Construction of embankment with approved material obtained from borrow pitsfrom 2.00 Km lead with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Laying brick soling with strainght over burnt bricks laid on edge and dry with brick edging on both sides including preparation of subgrade to prescribed camber and including supply of bricks filling joints with lacal earth of P.I. 5 to 7 , spreading blinding coat 1 cm (3/8") depth of local earth over the entire surface and Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.SOR 762 ch. no 20.06.

Providing & laying of 1000 mm hume pipe in position including supply of all material, labour, T&P all taxes, labour cess etc required for proper completion of work as per PWD specifications SOR Ch.no 19.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Providing & fixing empty cement bags filled with lacal earth,hand sewing with suja & sutli and placing in position within 60 m including cost of E.C.bags,all labour,material and t&P requierd proper completion of work as per PWD specifications SOR Ch.no 19.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Removing of 1000 mm hume pipes and stacking within a lead of 1000 metres including earthwork and dismantling of masonary works as per S.no.2.04(ix).Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

Providing and laying of hot applied thermoplastic compound 15 mm thick for repeated bar marking including reflectorising glass beads @ 500 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.

SHARMA CONSTRUCTION PROJECT PVT LTD

M/s AP & Associates

Jeet Construction

Ashok Kumar Chhabra Constructions Pvt.Ltd.