Annual repair of outside upper staff qtr securty establishment karan Bhawan and approach road to Raj Bhawan on the eve of Darbar move at Raj Bhawan Jammu

Amount

Renewing glass panes, with putty and nails wherever necessary including raking out old putty Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm)

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on Old work (two or more coats).

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Finishing walls with premium Acrylic smooth exterior paint with silicon additives of required shade: Old work (Two or more coats applied @ 1.43 liters/ 10 sqm) over existing cement paint surface.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm Hindware/Cera/Parryware make

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing P.V.C low level flushing cistern with manually ontrolled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete 10 liter capacity -White

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings.

Flat back wash basin of size 550x400 mm

Flat back wash basin of size 450x300 mm

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete: White solid plastic seat with lid.

Providing and fixing connection pipe with brass end union (Superior)

Providing and fixing waste for sink/ wash basin

Providing abnd fixing CP brass waste coupling for wash basin 32 mm dia Jaquar/Cera/Marc/Essco.

Providing and fixing CP brass fitting. Jaquar/Cera/Marc/Essco.

C.P pillar Cock

C.P Angle Cock

C.P Short Nose bib cock

C.P Long Nose bib cock

C.P Extension Nipple 1"x2"

C.P Extension Nipple 1"x3"

C.P Extension Nipple 1"x4"

C.P Soap dish

C.P inlet connection pipe with with C.P nuts

C.P Towel Rod 24" dia

C.P Towel Ring 200 mm dia

C.P Conceled stop Cock

C.P Shower with arm

Providing and fixing CP brass 100 mm dia gratting

Providing and laying in position cement concrete 1:4:8

Providing and laying in position cement concrete 1:3:6

Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) including extra for brick masonary in surpr structure above plinth level upto 5th floor

Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like :Cement mortar 1:6 (1 Cement : 6 coarse sand) (Nallah)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns

Pointing on brick work or brick flooring with cement mortar 1 : 3 (1 cement : 3 fine sand) flush/ruled/stuck or wethring pointing

Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) Raised and cut pointing

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)

CERAMIC GLAZED TILES Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 150x10 mm

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 100x10 mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 75 mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:

Steel work welded in built up sections using 8 mm thick MS plate welded with angle iron hold fast including embedy holdfast in Cement Concrete in brick masonary etc. will a coat of steel primer or mild steel MS sheet

Providing and fixing 1st quality Anti skid floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including Size of tile 600x600 mm

Disposal of unserviceable dismentled material/waste mulba by Mechanical transportation outside Municipal limits incl. cost of loading, unloading, stacking complete (Trolly)

Grinding and polishing of old trazzo flooring/skirting with machine including polishing with floor polish of spesified brand foer smooth finish and disposal of waste grinding/polishing from site of work to dumping site.

Supply of labour for repair work

labour

Mason

Welder

Carpenter

Plumber

Sweeper

Hire Charges of portable welding set as of when required

Providing and laying cover to PVC water storage tank

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank (Sintax/Star)

Washing cleaning of kerb stone of footpath, central verg wall etc. with detrgen including cost of cloth

Providing and fixing coated sheet 0.50 mm thickness in wall fencing with necessary nuts/bolts of G.I J Hook washal etc. incluing cost of frame structure

Providing and fixing polycarbonated transparent plain sheet 2 mm thick including all accessiores.

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

Supply of following ,material as when require

Acid Bottle 750 ml

Drainer 40 grm pouch

Harpic

Roundup chemical

Detol Handwash 200 ml

Tank Cleaning water tank on roof with latest technology

Providing and fixing wall panneling 6 mm thick on wall including cost of all fitting

Providing and fixing water proof plywood

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class deodar wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Second class deodar wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters using 12 mm thick plain partical board Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. shutters in 30 mm Second class deodar wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :

30 mm thick

35 mm thick

Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With Galvanized M.S. Wire gauge with wire of dia 0.63 mm. With 2nd class teak wood beading 62x19 mm

CPVC PIPES AND FITTINGS Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge

20mm nominal outer dia pipes.

25mm nominal outer dia pipes.

40mm nominal outer dia pipes.

Proividing and fixing following C PVC fitting

20mm ball valve

25mm ball valve

40mm ball valve

Providing and fixing including jointing PVC puipe and fitting

110 mm dia

75 mm dia

110 mm x75 mm dia floor trap

110 mm dia PVC Plain Bend

75 mm dia PVC Plain Bend

Water proofing of all surface including cleaning the surface with wire brush to make the surface free from all loose dirt/dust partical and minar reparing of the surfacr, applying to coats with Dr. fixit pidicratie URP 30 dia water proofing compound ratio 1 bag cement + 3 bags + 5 bags Kg per URP apply Dr. Fixit tourch Dr. fixit torch shield roll with 4' over laping of joint over the parped surface for water proofing the dr. fixit tourch shield mambrane 160 (3 mm thick) are equilvalent and then properly water proofing coat as directed including cost of material carriage complete job including priming coat as per specification.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase.

PBM filling in layers including ramming and consolidation

M/S SANJAY KUMAR

KULDEEP SHARMA

Bahadur Lal