Fabrication Repair work of Unit 7 8 9

TMD-DTPS (UNIT- 8 & 9, 2X250MW)

TAPER PLUG FABRICATE

Balancing of steam / vapour exhauster fan

THRUST PAD CEP COUP <REBABITTING>

REP/RE-METALLIZATION OF CEP JOURNAL BRG

FABRICATION OF SS/MS NIPPLE

HYDRAULC JACK 100 TON <REPAIRING>

FABRICATION BUSH VALVE 50 NB

FABRICATION BUSH VALVE 100 NB

FABRICATION COLLAR CEP TH-JR BRG

FABRICATION STUDS FOR MANHOLE HP HEATER

HYDRAULC JACK 50 TON <REPAIRING>

KEYS/COUPLING BOLT <MACHINING>

INT BRG BUSH HOUSING DW PUMP<FABRI>

INTERNAL BORING CUTTING KEYWAY 38/32/40

INTERNAL BORING CUTTING KEYWAY 75/40/50

INTERNAL BORING CUTTING KEYWAY 78/50/60

Misc work Welding and Fabrication job

Repair L. Angle basket BFP suc. Strainer

Repair S. Angle basket BFP suc. Strainer

Repairing of MOT strainer

Repairing of CEP strainer

Repair Thrust Brg key Size: 60X120mm

Different valves Size:250NB-350NB

Machin Turb. MOP ThrustBrg/Jrnl Brg/WearRing

Machining of Packers/keys of Turbine

Machine Oil guards of Turb. & Gen.

TMD-CTPS (UNIT- 7, 1X110MW)

FABRICATION OF COUPLING BOLTS OF SOP

Fabrication of butterfly valve gearbox pinion shaft

Repairing of HPCV Servomotor (L)

BMD-1 DTPS (UNIT- 8 & 9, 2X250MW)

Repair of class 2500/3000, 100 NB cast alloy steel gate valve/glove valve Butt welded ends, Hand operated for handling steam up to Temp. 550 degree C and Pressure 250 KG./cm2

Repair of class 2500/3000, 65 NB cast alloy steel gate valve/glove valve Butt welded ends, Hand operated for handling steam up to Temp. 550 degree C and Pressure 250 KG./cm2

Repair of class 2500/3000, 50 NB cast alloy steel gate valve/glove valve Butt welded ends, Hand operated for handling steam up to Temp. 550 degree C and Pressure 250 KG./cm2

Repair of class 2500/3000, 40/25 NB cast alloy steel gate valve/glove valve Butt welded ends, Hand operated for handling steam up to Temp. 550 degree C and Pressure 250 KG./cm2

Repair of 40 ata cast alloy steel gate/glove valve, Hand operated of size 40/25 NB size

Repairing of safety valve of Drum & Ms Line, CRH Line and HRH Line

Repairing of super heater spray Line pneumatic control valve and isolating valve of class 2500, 80NB size.

Repairing of Re-Heater spray Line pneumatic control valve and isolating valve of class 2500, 50NB size.

FABRICATION BUSH VALVE 100 NB

INTERNAL BORING CUTTING KEYWAY 38/32/40

Misc work Welding and Fabrication job

BMD-II DTPS (UNIT- 8 & 9, 2X250MW)

Modification of RC Feeder Clutch motor assembly for RC Feeders of Mills of Unit # 8 and 9 DTPS, HTPS.

Fabrication of 03 nos of Blade/Spring Seal Holders of Hot Air Dampers (As per sample) of Mills of Unit # 8 and 9 DTPS, HTPS.

Repairing of Shaft for seal air fans by metalizing and machining, repairing of its sleeves and dynamic balancing of Unit # 8 and 9 DTPS HTPS.

Reclamation of Link rods (as per sample) 02 sets (of 03 nos each) for operating outlet dampers of FD Fans of Unit # 8 and 9 DTPS HTPS.

Reclamation of pinion gear for Gear box for operating inlet damper of ID fans of Unit # 8 and 9 DTPS HTPS.

Reclamation of Inlet/Weigh span rollers (02 nos) of RC feeder Roller

Reclamation of Head/Tail pulley (01no) of RC feeder

Fabrication/Reclamation of shim/spring for FD/PA fan (48 nos)

Repairing & reconditioning of Hydraulic Jack (1 No. Jack + 1 No. pump) (Capacity 30 Ton & above)

Fabrication of Grating of Mill (size 1160X1040X12mm) reject System in two pieces (02 Nos) as per sample

Fabrication/Reclamation of any other spares as per sample (SS/MS Sheet/Other Material provided from Nigam) per MT of Steel

FABRICATION OF BOLTS (Size:- Dia may vary from 30 mm to 60 mm and length may vary from 600 mm to 1000 mm) WITH MATERIAL as per sample (for 08 nos)