Loading
Loading…
Loading…
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
12 Oct 2026, 6:00 pm
GE 863 EWS, PIN-913863, c/o 56 APO
GE 863 EWS, c/o 56 APO
REPAIR / MAINTENANCE OF EXTERNAL WATER SUPPLY PIPELINES, SLUICE VALVES AND OTHER CONNECTED WORKS AT SUMDO AREA UNDER GE 863 EWS
2026_MES_790519_1
GE/863/EWS-T-81 OF 2026-27
Open Tender
Civil Works
Item Rate
180 days
Sumdo
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE 863 EWS
₹30,000
Yes
22 Sept 2026
22 Sept 2026
19 Oct 2026
22 Sept 2026
12 Oct 2026
6 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 m in depth in soft / loose soil for laying underground pipes etc., complete all as specified and directed by Engineer-in-charge. | 70 | Cum | - | - |
| 2 | Returning, filling in including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick each layer in soil complete all as specified and directed. | 65 | Cum | - | - |
| 3 | Removing excavated surplus material to a distance not exceeding 50 m and deposting where directed at a level not exceeding 1.5 m above the starting point in any type of soil complete all as specified and directed. | 5 | Cum | - | - |
| 4 | Material and labour for disconnecting / dismantling / pulling out the existing unserviceable 75 mm diameter HDPE Pipe PE100, PN 16 water supply pipeline from approximate span of 720 meter length fixed between two hills i.e. M. Dogri and Samsung more over Pare-Chu River, 750 meter approximate vertical height from river, after careful disconnection of both ends of pipeline including making arrangement for dumping of Steel Wire Rope (SWR) at each side of river (approximately 0.5 to 1.5 km) from road in hilly terrain and deep slope at both sides by manpower for making arrangement for pulling of pipeline with SWR, opening of rings, clamps, nut bolts, UNSV pipelines, etc. and relaying / refixing of complete pipe with replacing UNSV pipes, necessary joints with MS/GI pipe (Nipple) of suitable size as existing with locking arrangement, clamp, nut, bolt etc. with fixing of rings at 1 to 1.5 meter distance of GI/SWR wire at both ends fully tightening the pipe with existing SWR and anchoring with girder with necessary T&P, fixing / laying of pipe line (hanging on SWR) with pulling arrangement from one side to other side, complete commisioning of the job to the entire satisfaction of Engr-in-Charge complete all as required and directed at site. | 1 | Each Job | - | - |
| 5 | Supply only HDPE Pipe of Grade PE100, PN 16 of dia 75 mm including fittings ,complete all as specified and directed.
Note: Fixing charges are included in item No 4. | 850 | RM | - | - |
| 6 | Supply only of Steel Wire Rope (SWR) of dia 8 mm (single length) for pulling the pipe by lowering in Pare-Chu river complete all as specified and directed at site.
Note: Fixing charges are included in item No 4. | 760 | RM | - | - |
| 7 | Taking up or down old unserviceable HDPE Pipe of dia 110 mm complete all as specified and directed. | 307 | RM | - | - |
| 8 | All as per item No 7 above but of dia 90 mm complete all as specified and directed. | 110 | RM | - | - |
| 9 | All as per item No 7 above but of dia 65 mm complete all as specified and directed. | 50 | RM | - | - |
| 10 | All as per item No 7 above but of dia 40 mm complete all as specified and directed. | 120 | RM | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
BOQ_886332.xls
BOQ • 0.41 MB
TD81.pdf
Tender Documents • 2.20 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .