Annual Rate contract for repair of HC pumps, Booster and submersible motors, submersible pumps and submersible pump (V-6) installed at various pumping stations in Jal Shakti (PHE) Division Akhnoor.

Amount

RKB make HC Pump

Repairing of pump shaft by jointing welding & turning to bearing size (upto to 5 stage)

Repairing of pump shaft by jointing welding & turning to bearing size (6 stage to 10 satge))

Repairing of pump shaft by jointing welding & turning to bearing size (Beyond 10 stage)

Providing, Fabrication & fitting of new pump shaft as per size and specification. (3 Stage Pump)

Providing, Fabrication & fitting of new pump shaft as per size and specification. (4 Stage Pump)

Providing, Fabrication & fitting of new pump shaft as per size and specification. (5 Stage Pump)

Providing, Fabrication & fitting of new pump shaft as per size and specification. (6 Stage Pump)

Providing, Fabrication & fitting of new pump shaft as per size and specification. (7 Stage Pump)

Providing, Fabrication & fitting of new pump shaft as per size and specification. (8 Stage Pump)

Providing, Fabrication & fitting of new pump shaft as per size and specification. (9 Stage Pump)

Providing, Fabrication & fitting of new pump shaft as per size and specification. (10 Stage Pump)

Providing, Fabrication & fitting of new pump shaft as per size and specification. (12 Stage Pump)

Providing, Fabrication & fitting of new pump shaft as per size and specification. (14 Stage Pump)

Providing and fitting of Brass Impeller as per sample.

Providing and fitting of C.I Impeller as per sample.

Repairing of brass Impeller

Repairing of C.I Impeller

Fabrication & fitting of neck ring.

Fabrication & fitting of diffuser bush

Fabrication of Stainless steel gland bush

Fabrication of chuck nut

Providing & Fitting of pump bowl

Repair to bearing housing by sleeve fitting & boring for bearing size

Providing of bearing housing along with side cover plate

Providing and fitting of Delivery Body

Providing and fitting of Suction Body

Providing of diffuser

Providing & Fitting of Oil seal

Replacement of ball thrust bearing-7307

Replacement of ball thrust bearing-7308

Replacement of ball thrust bearing-7309

Replacement of Roller bearing-N-307

Replacement of Roller bearing-N-308

Replacement of Roller bearing-N-309

Providing & Fitting Coupling bolts nuts & rubber bushes.

Dismantling & fitting of Pump ( 3 stage to 5 stage)

Dismantling & fitting of Pump ( 6 stage to 10 stage)

Dismantling & fitting of Pump ( Beyond 10 stage)

Providing & Fitting of heavy duty Coupling pulley set (5 inch dia)

Providing & Fitting of heavy duty Coupling pulley set (6 inch dia)

Providing & Fitting of heavy duty Coupling pulley set (7 inch dia)

Providing & Fitting of heavy duty Coupling pulley set (8 inch dia)

FNC Make

Repairing of pump shaft by jointing welding & turning to bearing size (upto to 5 stage)

Repairing of pump shaft by jointing welding & turning to bearing size (6 stage to 10 stage)

Repairing of pump shaft by jointing welding & turning to bearing size (beyond 10 stage)

Fabrication & fitting of new pump shaft as per size and specification (3 Stage)

Fabrication & fitting of new pump shaft as per size and specification (4 Stage)

Fabrication & fitting of new pump shaft as per size and specification (5 Stage)

Fabrication & fitting of new pump shaft as per size and specification (6 Stage)

Fabrication & fitting of new pump shaft as per size and specification (7 Stage)

Fabrication & fitting of new pump shaft as per size and specification (8 Stage)

Fabrication & fitting of new pump shaft as per size and specification (9 Stage)

Fabrication & fitting of new pump shaft as per size and specification (10 Stage)

Fabrication & fitting of new pump shaft as per size and specification (12 Stage)

Fabrication & fitting of new pump shaft as per size and specification (14 Stage)

Providing and fitting of Brass Impeller as per sample.

Providing and fitting of C.I Impeller as per sample.

Repairing of brass Impeller.

Repairing of C.I Impeller.

Fabrication & fitting of neck ring.

Fabrication & fitting of body bushes.

Fabrication of Stainless steel gland bushes

Fabrication of chuck nut

Providing & Fitting of pump bowl

Repair to bearing housing by sleeve fitting & boring for bearing size

Fabrication of bearing housing along with side cover plates

Providing and fitting of Delivery Body

Providing and fitting of Suction Body

Replacement of Roller bearing-N-204

Replacement of Roller bearing-N-205

Providing and fitting of diffuser.

Providing and fitting of thrust plate.

Providing & Fitting of Oil seal

Fabrication & fitting of thrust plate

Providing & Fitting Coupling bolts nuts & rubber bushes.

Dismantling & fitting of Pump (3 stage to 5 stage)

Dismantling & fitting of Pump (6 stage to 10 stage)

Dismantling & fitting of Pump (Beyond 10 stage)

Providing & Fitting of heavy duty Coupling pulley set (5 inch dia)

Providing & Fitting of heavy duty Coupling pulley set (6 inch dia)

Providing & Fitting of heavy duty Coupling pulley set (7 inch dia)

Providing & Fitting of heavy duty Coupling pulley set (8 inch dia)

KSB Make

Repairing of pump shaft by jointing welding & turning to bearing size (upto to 5 stage)

Repairing of pump shaft by jointing welding & turning to bearing size (6 stage to 10 stage)

Repairing of pump shaft by jointing welding & turning to bearing size (beyond 10 stage)

Fabrication & fitting of new pump shaft as per size and specification. ( 3 stage pump)

Fabrication & fitting of new pump shaft as per size and specification. ( 4 stage pump)

Fabrication & fitting of new pump shaft as per size and specification. ( 5 stage pump)

Fabrication & fitting of new pump shaft as per size and specification. ( 6 stage pump)

Fabrication & fitting of new pump shaft as per size and specification. ( 7 stage pump)

Fabrication & fitting of new pump shaft as per size and specification. ( 8 stage pump)

Fabrication & fitting of new pump shaft as per size and specification. ( 9 stage pump)

Fabrication & fitting of new pump shaft as per size and specification. ( 10 stage pump)

Fabrication & fitting of new pump shaft as per size and specification. ( 12 stage pump)

Fabrication & fitting of new pump shaft as per size and specification. ( 14 stage pump)

Providing and fitting of Brass Impeller as per sample

Providing and fitting of C.I Impeller as per sample

Repairing of brass Impeller.

Repairing of C.I Impeller.

Fabrication & fitting of neck ring.

Fabrication & fitting of spacer bushes.

Fabrication of Stainless steel gland bushes

Fabrication of chuck nut

Providing & Fitting of pump bowl

Repair to bearing housing by sleeve fitting & boring for bearing size

Providing of bearing housing along with side cover plates

Providing and fitting of Delivery Body

Providing and fitting of Suction Body

Replacement of bearing 208K with sleeve.

Replacement of bearing 307 with sleeve.

Replacement of ball thrust bearing-7309

Providing and fitting of diffuser.

Fabrication & fitting of thrust plate

Providing & Fitting of Oil seal

Providing & Fitting Coupling bolts nuts & rubber bushes.

Dismantling & fitting of Pump (3 stage to 5 stage)

Dismantling & fitting of Pump (6 stage to 10 stage)

Dismantling & fitting of Pump (Beyond 10 stage)

Providing & Fitting of heavy duty Coupling pulley set (5 inch dia)

Providing & Fitting of heavy duty Coupling pulley set (6 inch dia)

Providing & Fitting of heavy duty Coupling pulley set (7 inch dia)

Providing & Fitting of heavy duty Coupling pulley set (8 inch dia)

Mather Platt make

Repairing of pump shaft by jointing welding & turning to bearing size (upto to 5 stage)

Repairing of pump shaft by jointing welding & turning to bearing size (6 stage to 10 stage)

Repairing of pump shaft by jointing welding & turning to bearing size (beyond 10 stage)

Fabrication & fitting of new pump shaft as per size and specification. ( 3 stage pump)

Fabrication & fitting of new pump shaft as per size and specification. ( 4 stage pump)

Fabrication & fitting of new pump shaft as per size and specification. ( 5 stage pump)

Fabrication & fitting of new pump shaft as per size and specification. ( 6 stage pump)

Fabrication & fitting of new pump shaft as per size and specification. ( 7 stage pump)

Fabrication & fitting of new pump shaft as per size and specification. ( 8 stage pump)

Fabrication & fitting of new pump shaft as per size and specification. ( 9 stage pump)

Fabrication & fitting of new pump shaft as per size and specification. ( 10 stage pump)

Fabrication & fitting of new pump shaft as per size and specification. ( 11 stage pump)

Fabrication & fitting of new pump shaft as per size and specification. ( 12 stage pump)

Fabrication & fitting of new pump shaft as per size and specification. ( 14 stage pump)

Providing and fitting of Brass Impeller as per sample

Providing and fitting of C.I Impeller as per sample

Repairing of brass Impeller.

Repairing of C.I Impeller.

Fabrication & fitting of neck ring.

Fabrication & fitting of spacer bushes.

Fabrication of Stainless steel gland bushes

Fabrication of chuck nut

Providing & Fitting of pump bowl

Repair to bearing housing by sleeve fitting & boring for bearing size

Providing of bearing housing along with side cover plates

Providing of oil cooled brass bush

Providing and fitting of Delivery Body

Providing and fitting of Suction Body

Replacement of bearing-306 Nu

Replacement of bearing-307 Nu

Providing and fitting of diffuser.

Fabrication & fitting of thrust plate

Providing & Fitting of Oil seal

Providing & Fitting Coupling bolts nuts & rubber bushes.

Dismantling & fitting of Pump (3 stage to 5 stage)

Dismantling & fitting of Pump (6 stage to 10 stage)

Dismantling & fitting of Pump (Beyond 10 stage)

Providing & Fitting of heavy duty Coupling pulley set (5 inch dia)

Providing & Fitting of heavy duty Coupling pulley set (6 inch dia)

Providing & Fitting of heavy duty Coupling pulley set (7 inch dia)

Providing & Fitting of heavy duty Coupling pulley set (8 inch dia)

Booster and Submersible Motors

Repairs to V-6 submersible motor by rotor shaft turning & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of Stud with nuts in place of damaged studs as per requirement, Circlip lock-2nos, Fitting of motor &coupled with pump & testing in the test pit.

Repairs to V-6 submersible motor by rotor shaft turning & polishing, Fabrication & fitting of bushes in bush housing-2set. Repairs to thrust pad 01 set. P/F of Stud with nuts in place of damaged studs as per requirement, Circlip lock-2nos, Fitting of motor &coupled with pump & testing in the test pit.

Repairs to V-8 submersible motor by rotor shaft turning & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of Stud with nuts in place of damaged studs as per requirement, Circlip lock-2nos, Fitting of motor &coupled with pump & testing in the test pit.

Repairs to submersible motor (V-8) by rotor shaft turning & polishing, Fabrication & fitting of bushes in bush housing-2set. Repairs to thrust pad 01 set. P/F of Stud with nuts in place of damaged studs as per requirement, Circlip lock-2nos, Fitting of motor &coupled with pump & testing in the test pit.

Repair to submersible Motor (V-6) by extraction of broken copper strips from rotor than P/F of new copper strips (01 No.)& welding of the rotor, turning & finishing. Also repair to rotor end by rebuilding, turning & finishing.

Repair to submersible Motor (V-8) by extraction of broken copper strips from rotor than P/F of new copper strips (01 No.)& welding of the rotor, turning & finishing. Also repair to rotor end by rebuilding, turning & finishing.

Repairs to V-6 submersible motor by rotor shaft turning & polishing, Fabrication & fitting of bushes in bush housing-2set.Fitting of motor &coupled with pump & testing in the test pit.

Repairs to V-8 submersible motor by rotor shaft turning & polishing, Fabrication & fitting of bushes in bush housing-2set.Fitting of motor &coupled with pump & testing in the test pit.

Repairs to V-6 submersible motor by way of P/F of thrust pad 01 set. P/F of Stud with nuts in place of damaged studs as per requirement, Circlip lock-2nos, Fitting of motor &coupled with pump & testing in the test pit.

Repairs to V-8 submersible motor by way of P/F of thrust pad 01 set. P/F of Stud with nuts in place of damaged studs as per requirement, Circlip lock-2nos, Fitting of motor &coupled with pump & testing in the test pit.

Repair 25 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Repair 25 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at DE and NDE & then assembling of motor.

Repair 25 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at one end & then assembling of motor.

Repair 40 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at one end & then assembling of motor.

Repair 40 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Repair 40 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at DE and NDE & then assembling of motor.

Repair 50 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Repair 50 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at DE and NDE & then assembling of motor.

Repair 50 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at one end & then assembling of motor.

Repair 60 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at one end & then assembling of motor.

Repair 60 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Repair 60 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at DE and NDE & then assembling of motor.

Repair 100 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Repair 70 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Repair 100 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at DE and NDE & then assembling of motor.

Repair 100 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at one end & then assembling of motor.

Repair to 25 HP motor by way of replacement of bearing at one end and assembling of motor.

Repair to 40 HP motor by way of replacement of bearing at one end and assembling of motor.

Repair to 50 HP motor by way of replacement of bearing at one end and assembling of motor.

Repair to 60 HP motor by way of replacement of bearing at one end and assembling of motor.

Repair to 100 HP motor by way of replacement of bearing at one end and assembling of motor.

Repair to 25 HP motor by way of replacement of bearing at DE & NDE and assembling of motor.

Repair to 40 HP motor by way of replacement of bearing at DE & NDE and assembling of motor.

Repair to 50 HP motor by way of replacement of bearing at DE & NDE and assembling of motor.

Repair to 60 HP motor by way of replacement of bearing at DE & NDE and assembling of motor.

Repair to 100 HP motor by way of replacement of bearing at DE & NDE and assembling of motor.

Repair 75 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Repair 75 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at DE and NDE & then assembling of motor.

Repair 75 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at one end & then assembling of motor.

Repair to 75 HP motor by way of replacement of bearing at DE & NDE and assembling of motor.

Repair to 75 HP motor by way of replacement of bearing at one end and assembling of motor.

Submersible

Providing of Adaptor for V-6 Submersible motor

Providing of Adaptor for V-8 Submersible motor

Fabrication & providing of MS Clamp 3"

Fabrication & providing of MS Clamp 4"

Fabrication & providing of MS Shling for Gantry Post

Fabrication & providing of 80 mm dia. flanged adaptor with threading at other side

Fabrication & providing of 65 mm dia. flanged adaptor with threading at other side

Fabrication & providing of 125 mm dia. flanged adaptor with threading at other side

Fabrication & providing of 150 mm dia. flanged adaptor with threading at other side

Fabrication & providing of 100 mm dia. flanged adaptor with threading at other side

Fabrication & providing of 50 mm dia. flanged adaptor with threading at other side

Submersible Pump (V-4)

Fabrication/Providing of Coupling pulley with cotter for V-4 Submersible motor

Repairing of pump shaft by welding, turning, polishing and making key ways.

Fabrication of pump shaft as per specification.

Fabrication/Providing of New Impeller

Fabrication/Providing of New PVC A-Grade Impeller with body set

Repair to impeller

Fabrication/Providing of Neck Ring

Fabrication/Providing of Body Bushes

Fabrication/Providing of Guide Bush

Fabrication/Providing of Spacer Bush

Fabrication/Providing of Cotter

Providing and fitting of body cover as per specification

Fabrication/Providing of Pump Body

Fabrication/Providing of Suction Body

Labour Charges for dismantling and fitting of pump

Submersible Pump (V-8)

Providing of Coupling pulley with cotter for V-8 Submersible motor

Repairing of pump shaft by welding, turning, polishing and making key ways.

Fabrication of pump shaft

Fabrication of Neck Ring

Fabrication/Providing of New Impeller

Repair to impeller

Fabrication of Body Bushes

Fabrication of Guide Bush

Fabrication of Spacer Bush

Providing of Cotter

Fabrication of Pump Body

Providing of Suction Body

Providing of NRV with adaptor

Labour Charges for dismantling and fitting of pump

Submersible Pump (V-6)

Providing of Coupling pulley with cotter for V-6 Submersible motor

Repairing of pump shaft by welding, turning, polishing and making key ways.

Fabrication of pump shaft as per specification (upto 5 stage)

Fabrication of pump shaft as per specification (6 stage to 10 stage)

Fabrication of pump shaft as per specification (11 stage to 15 stage)

Fabrication of pump shaft as per specification (16 stage to 20 stage)

Fabrication of pump shaft as per specification (beyond 20 stage)

Fabrication/Providing of New Impeller

Fabrication/Providing of New PVC A-Grade Impeller

Repair to impeller

Fabrication/Providing of Neck Ring

Fabrication/Providing of Body Bushes

Fabrication/Providing of Guide Bush

Fabrication/Providing of Spacer Bush

Fabrication/Providing of Cotter

Fabrication/Providing of Pump Body

Fabrication/Providing of Suction Body

Dismantling & fitting of Pump (upto 5 stage)

Dismantling & fitting of Pump (6 stage to 10 stage)

Dismantling & fitting of Pump (11 stage to 15 stage)

Dismantling & fitting of Pump (Beyond 15 stage)

M/S V.N ENGG WORKS

M/S UTTAM ENGINEERS

TRIKUTA ELECTRICAL AND MECHANICAL WORKS

M/S PERFECT ENGINEERING WORKS

HITECH MECHNICALS

VK Mechanical Works