Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹30.4 LAccepted-AOC | L-1 | Accepted-AOC Being Lowest and reasonable | |
| 2 | L-2₹34.1 L+₹3.3 L (10.7%)Rejected-Finance RONGMEN BARAPANI PO SHILLONG 793103 | RI BHOI | MEGHALAYA | 793103 | L-2 | Rejected-Finance Other than Lowest | |
| 3 | L-3₹35.8 L+₹5.0 L (16.2%)Rejected-Finance C O SIMPLICITY LYNGDOH LOWER LUMPARING LABAN SHILLONG 793004 | EAST KHASI HILLS | MEGHALAYA | 793004 | L-3 | Rejected-Finance Other than Lowest | |
| 4 | L-4₹37.9 L+₹7.1 L (23.0%)Rejected-Finance RONGMEN B IV BARAPANI PO SHILLONG 793103 | RI BHOI | MEGHALAYA | 793103 | L-4 | Rejected-Finance Other than Lowest |
Tender Value
₹37 L
EMD Value
₹74,000
Closing Date
29 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Umroi
Military Engineer Services Garrison Engineer Umroi Umroi Military Station PO - Barapani, Shillong-793 103
SPL REPAIR OF 20 X BATHROOM OF BLDG NO P-138 OTM AND ADDN/ALTN OF BLDG NO P-129 AT UMROI MIL STN UNDER GE UMROI
2023_MES_611525_1
8749/E8
Open Tender
Civil Works
Item Rate
180 days
GE Umroi
As per NIT
8 documents required · 8 mandatory
₹500
GE Umroi
₹74,000
14 Nov 2023
1 Aug 2023
30 Aug 2023
1 Aug 2023
29 Aug 2023
15 Aug 2023
Amount
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debris n.exc 50m and rubbish of the premises complete all as specified and directed
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc, & brushing neat cement slurry with 3.0kg of cement per sq. metre, complete all as specified and directed
Material and labour for coloured non skid ceramics tiles 7 to 8mm thick (square/ rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors over and including 15mm thick screed bed/bedding layer in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing floor, complete all as specified and directed
Material and labour for coloured Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in CM 1:4 complete all as specified and directed.
Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00 sqm with shutters (without taking off shutters from the frame), complete all as specified and directed..
Taking down chowkats or frames n. exc 1.50 sqm with shutters (without taking off shutters from the frame), complete all as specified and directed.
Taking down shuuter of any description exc 1.00 sqm but not exc 2.00 sqm each complete all as specified and directed.
Refixing shutter in same opening after repairing complete area exc 1.00 Sqm but not exc 2.00 Sqm, complete all as specified and directed.
S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet, complete all as specified and directed.
S&F Factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm PVC sheet on back face, fixing in frame at site as per specification & drawing, complete all as specified and directed.
S&F Pressed steel frames of frame size 105x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. Note : Filling of hollow of frames with PCC (1:2:4) type B0, rate shall be deemed to be inclusive.
S&F Pressed steel frames of frame size 125x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. Note : Filling of hollow of frames with PCC (1:2:4) type B0, rate shall be deemed to be inclusive.
Material & labour PCC 1:2:4, type B0 (12.5mm graded agg.) for fixing hold fasts, angle etc complete all as specified and directed.
Material & labour flat iron mild steel for hold fast size conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed.
S&F 35mm thick Factory made 2nd class hard wood plain framed panelled shutter (two panels) with lock rail and panel of 9mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces . The size of rail and stile as per IS:1003(Part-I), klin seasoned and chemically pressure treated complete all as specified and directed.
S&F 35mm thick glazed and skeleton shutters, 2nd class hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), but divided into squares, with plain, chamfered or rounded, fitted with cut and mitred and rebated sash bars beads for securing glass, gauge etc.; sizes of members of shutters as specified in SSR Part I, complete all as specified and directed.
S&F in repair prelaminated particle board 18/19mm thick as in cup board shutter and Shelf, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame works complete all as specified and directed.
S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed.
S&F powder coated aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed.
Supply & Fixing 4.8mm thick sheet glass ordinary quality and glazing with oil putty in square n,exc 0.50 sqm each pan, complete all as specified and as directed.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed.
S&F 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S&F 75mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S&F aluminium alloy handles size 150mm fabricated type anodised complete all as specified and directed.
S&F aluminium anodised barrel tower bolt 200mm size of extruded section and fixed, complete all as specified and directed.
S&F 300 mm long aliminium alloy ,anodised sliding door bolt with hasp and staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast alunimium alloy complete all as specified and directed.
S&F 100 mm hasp and staples of alunimium anodised, safty type including bolt to hinges plate and fixed with screws complete complete all as specified and directed.
S&F helical door spring 300mm long incl roller and roller plate including welding if required at site, complete all as specified and directed.
S&F in repair decorative type tubular 20mm dia curtain rod chromium plated complete all as specified and directed.
S&F in repair decorative brackets for curtain rod in any size complete all ascomplete all as specified and directed.
Taking up or down steel tubing 15mm bore and connections, complete all as specified and directed.
Taking up or down steel tubing 20mm bore and connections, complete all as specified and directed.
Taking up or down steel tubing 25mm bore and connections, complete all as specified and directed.
S&F 15mm bore tubing 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified. (upto 04 storey High of building)
S&F CPVC pipes 25 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified. (upto 04 storey High of building)
S&F 1000 ltrs capacity rotational moulded polyethylene water storage tanks (Cylindrical verticle with closed top) noisfed and fixed in position including taking down old one, complete all as specified and directed.
S&F in repair PVC valve less syphonic action flushing cistern type 10 ltrs capacity with inlet, ball valve, float and handle including bracket, flushing pipe, white colour of approved make, complete all as specified and directed.
S&F in repair of vitreous china squatting pan of Orissa pattern size 580mm x 440mm white with P or S tap front or back inlet and integral foot rest, complete all as specified and directed.
S&F repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe, complete all as specified and directed.
S&F in repair wash hand basin, white flat back of size 550mm x 400mm excluding piller taps but including waste cupling, waste pipe and bracket etc complete all as specified and directed.
S&F in repair kitchen sink of size made out of 1mm thick sheet of overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm plug washer brackets, connecting union, 40mm dia waste pipe etc including taking down old one, incl waste pipe and 40mm waste coupling complete all as specified and directed.
S&F PVC ball valve 20mm high pressure of PTM with epoxy coated aluminium rod and high density plastic ball serewed for iron pipe, complete all as specified and directed.
Taking down rainwater pipes (any size or pattern ), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing (measured overall as fixed along the centre line over fitting and (accessories) complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including scafolding for fixing upto 04 story building, complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including scafolding for fixing upto 04 story building, complete all as specified and directed.
S&F for 110mm dia PVC (SWR) bend etc fixed with rubber ring fixed to wall including scafolding for fixing upto 04 story building, complete all as specified and directed.
S&F for 75mm dia PVC (SWR) bend etc fixed with rubber ring fixed to wall including scafolding for fixing upto 04 story building, complete all as specified and directed.
S&F for 110mm bore PVC (SWR) junction double, (double T), equal or unequal fixed with access door with rubbr ring fixed to wall including scafolding for fixing upto 04 story building, complete all as specified and directed.
S&F for 75mm bore PVC (SWR) junction double, (double T), equal or unequal fixed with access door with rubbr ring fixed to wall including scafolding for fixing upto 04 story building, complete all as specified and directed.
M&L for Nahani trap with grating for 100mm dia outlet pipe, including making good distrubd area/surfaces with cement concrete/cement mortar 1:2:4 etc including taking down old unserviceable Nahani/Floor trap, complete all as specified and directed.
M&L for floor trap with grating for 100mm dia outlet pipe, including making good distrubd area/surfaces with cement concrete/cement mortar 1:2:4 etc including taking down old unserviceable Nahani/Floor trap, complete all as specified and directed.
S&F in repairs of stop valve 15 mm dia CP fancy type, with long shank and cup (concealed type) cast copper alloy, screwed both ends for iron pipe or for unions, complete all as specified and directed.
S&F in repairs of stop valve 15 mm dia CP fancy type, with long shank and cup cast copper alloy, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repairs 15 mm dia fancy type pillar tap cast copper alloy, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe & fixed, complete all as specified and directed.
S&F in repairs Shower Rose 125mm size Chromium plated with swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed.
S&F in repairs Brass chromium plated tubelar towel rail, 20mm dia, D type, 60,cm long between flanges, complete all as specified and directed.
M&L for Providing and fixing false ceiling of designer tile ivory painted (high pressure steam cured ) of 4mm thick (as per IS: 14862) of size 595x595mm and any one of the design (cascade or electra) in true horizontal level. Suspended on inter locking metal grid of hot dipped galvanized steel section (galvanized @120gms both side inclusive and black painted groove on all T webs)consisting of main T runner with suitably spaced joints to get required length and 15x32mm made of 0.3mm thick sheet spaced at 1200mm c/c and cross T of size 15x32mm made of 0.3mm sheet 1200mm long spaecd between main T at 600mm c/c to form a grid of 1200x600mm and secondary cross T of length 600mm and size 15x32mm made of 0.3mm thick sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including required cutting/making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.Main T runners to be suspended from trusses/ceilings using suitable suspension arrangement as per manufacturers instructions/literature. GI adjustable wire of 4mm dia with galvanized butterfly level clips spaced at 1200mm c/c along main T bottom exposed width of 15mm of all T section of 4mm dia GI wire shall be pre-painted with with polyster paint and black painted groove at centre of size 4mm depth and 4.5mm width, including taking down old false ceiling board of any description alongwith rails and connecting items all complete at all heights as per direction of Engr-in-charge.
Dismantling plain or corrugated or semi corrugated sheets in wall cladding or roof coverings and hanger doors including ridges and make good for aluminium earthing strips after fixing of sheets, complete all as specified and directed.
Fixing only plain or corrugated steel sheet of any guage or thickness as obtained from dismantling item and shall be fixed with 'L' or 'J' type hooks or cranked hook bolts as in roof, complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating PPGL based corrugated/Trapezoidal steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating PPGL based plain steel sheet 0.60mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, eave board, fixed with self tapping screws, complete all as specified and directed.
Demolition cement concrete (un-reinforced) of any descriptions not exc. 150mm thick, above or below Ground Level using concrete cutter and making good same as previous to the effected area, complete all as specified and directed
Taking down of existing roof treatment from roof and terrance, roughening surface of old concrete roof by picking, sweeping clean and washing down with water to remove dust, etc and applying roof treatment with the following specification :- (a) Apply cement slurry over concrete surface @ 3Kg/Sqm. (b) Rendering 15mm thick in cement mortar (1:4) mixed with water proffing compound as per manufactures instruction on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for 7 days by ponding of water over the roof, (leveling course). (c) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.25 litres per Sqm conforming to IS: 3384-1986. (d) Applying evenly one coat of blown hot bitument of grade 85/25@ 1.20 Kg per square metre on primed surfaces. (e) A layer of APP based polymeric membrane, 3mm thick (minimum), weighing 3.5 kg/m2 reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (f) Applying evenly one coat of aluminium paint @ 0.10 litre per square metre over the APP based polymeric membrane
Demolition of brick work built in CM including all quoins,arches, pillars etc, complete all as specified and directed
M&L for Brickwork with sub-class `B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6), complete all as specified and directed
Taking down cement plaster on brick or stone walls,etc incl raking out joints, hacking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 15mm thick rendering in CM (1:4) in two layers mixed with water liquid water proofing compound as per manufacture instruction in top layer 5 mm thick finishing the surfaces with fair and even without using extra cement, complete all as specified and directed. . Note: Liquid water proofing compound of Make - Conplast WL,Sika,Dr.Fixit measure separtely.
Supply only integral WPC ( Integral waterproofing liquid admixture for cement mortar) and application as per manufacture instruction all as specified and directed by Engr-in-charge. Make - Conplast WL,Sika,Dr.Fixit
M&L for rendering 15mm thick in cement mortar (1:6) internal surfaces on other than fair faces of brick work or concrete surfaces, complete all as specified and directed.
Material and labour for 5 mm thick rendering in cement mortar (1:3) on fair faces of exposed/non exposed concrete surfaces such as soffits of slabs, chajja,fasia and simillar work in patches n exc 1 sqm including mixing & application integral water proofing compound as per manufacture instruction of make Conplast WL,Sika,Dr.Fixit finishing the surfaces fair and even, complete all as specified and directed. Note: Liquid water proofing compound of Make - Conplast WL,Sika,Dr.Fixit measure separtely.
M&L for preparing surfaces of newly plastered surfaces on walls and applying two coat of distemper oil emulsion including 1.5mm thick internal wall putty with alkali resistant primer, complete all as specified and directed.
M&L for preparing surfaces of newly plastered on walls and applying two coat of acrylic smooth exterior paint including 1.5mm thick external wall puty with alkali resistant primer, complete all as specified and directed.
Material and labour for three coats of white wash on newly plastered surfaces of ceiling including preparation of new plastered surafaces, complete all as specified and directed.
M&L for complete removal of existing treatment surfaces on walls and applying two coat of distemper oil emulsion including 1.5mm thick external wall putty with alkali resistant primer including preparation of old plastered surafaces, complete all as specified and directed.
M&L for complete removal on walls and applying two coat of acrylic smooth exterior paint including 1.5mm thick internal wall puty with alkali resistant primer including preparation of old plastered surafaces, complete all as specified and directed.
M&L for complete removal of existing tretment and applying for three coats of white wash surfaces of ceiling including preparation of old surafaces, complete all as specified and directed.
Material and labour for preparation of old surface and applying one coats of synthetic enamel paint on old wood surfaces of any description over 10cm wide or girth incl preparation of surface etc, complete all as specified and directed.
Material and labour for complete/Partial removal of loose/ cracked RCC including cutting of reinforcement from RCC roof projection, chajja, fins, facia etc complete all as specified and directed. Note:- (1) reinforcement & RCC paid seperately under respective items, 2) The rate shall be inclusive of Scaffolding if required up four storey.
Material and labour for RCC (1:1.5:3) type A0 using 12.5 mm graded aggregate)and applying bonding agent as per manufacture instruction as per and making good with the undisturbed portion and in any position finsihed the surface even and smooth with out using extra cement including necesary welding/binding of reinforcement if required, complete as specified and directed. Rate shall be inclusive of bondig agent fosroc nitobond EP ,Sika hibond, Pidilite 301 pidicrete URP. The rate shall be inclusive of Scaffolding if required and form work.
M&L for Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.
M&L for welded steel wire febric N. Exc. 4 Kg/Sqm supplied and fixed to RCC member including necessary welding and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips , over Guniting/plastering in CM 1:4 average 20 mm thick incl water proofing admixtures compound fosroc conplast WL,Sika cim pink,Pidililite 101 LW+ as per manufacturer instructions, finishied even and smooth using extra cement to level the surface etc of over head tanks/UG Sumps where required complete all as specified and directed. Note: 1) WPC shall be measured seperately. 2)The rate shall be inclusive of Scaffolding if required.
M&L for Granite (of any type) work 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) over 15mm thick screed bed/bedding layer in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including taking down stone slab complete all as specified and directed.
Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulators, sockets, etc. to be measured separately) and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as directed by the Engr-in-Charge.
Taking down carefully MCB DBs SP/TPby unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed.
Material and labour for concealed point wiring with 1.5 Sqmm PVC insulated and sheathed multi stranded (FRLSH) flexible copper conductor cable in and incl rigid PVC conduit concealed /PVC surface conduit with sunk cast iron/pressed steel terminal boxes of adequate size with suitable thickness hylum laminated sheet, cover of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm (FRLSH) PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed. Note: a) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for fan etc with proper fixing clips all as directed
All as per serial item No 87 here in before but for one 3 pin 5 Amp socket outlet on independent board.
All as per serial item No 87 here in before but for one 3 pin 5 Amp socket outlet on same board.
All as per serial item No 87 here in before but for one light point controlled by two way switch.
All as per serial item No 87 here in before but for one bell point controlled by one push button switch
All as per item No 87 here-in-before but using 2.5 sqmm PVC FRLSH insulated copper condutor wire for connecting 15A socket on independent board.
Material and labour for point wiring for the One light/fan point controlled by one,one way switch with 1.5 Sqmm single core, PVC FRLS insulated unsheathed, multistranded copper conductor drawn through and including PVC casing and caping including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick complete all as specified and directed.
All as per serial item No 94 here in before but for one 3 pin 5 Amp socket outlet on independent board.
All as per serial item No 94 here in before but for one 3 pin 5 Amp socket outlet on same board.
All as per item No 94 here-in-before but using 2.5 sqmm PVC FRLSH insulated copper condutor wire for connecting 15A socket on independent board.
Supply and fixing of switch piano flush type 240 Volts 5 Amps, SP, one way with white colour complete all as specifed & directed.
Supply and fixing of switch piano flush type 240 Volts 5 Amps, SP, two way with white colour complete all as specifed & directed.
Supply and fixing of bell push flush type 240 Volts 5 Amps, one way with white colour complete all as specifed & directed.
Supply and fixing of switch socket outlet combination 3 Pin, 5 Amps, 240 volts flush type (non shuttered) with white colour complete all as specified & directed.
Supply & fixing of socket 3 pin 5 Amps 240 Volts flush type (non shuttered) with white colour complete all as specified and directed.
Supply and fixing switch socket out let combination multipurpose 3 pin, 5/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) with white colour complete all as specified & directed.
Supply and fixing ceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals, complete all as specified & directed.
Supply and fixing ceiling fan regulator electronic, Deluxe, rotary, step type, 120/280 V, complete all as specified & directed.
Supply and installation of new metering board powder coated double door fabricated with 1.6 mm thick CRCA sheet suitable for mounting 01No of TPN MCB and 05 No 6 to 32 Amps MCB with IP 43 protection, Glazed door, isolated neutral bar, insulated bus bar assemblyus bar for neutral and earth continuity arrangement of size not less than 75cm x 75cm x 15cm including taking down of old Unserviceable TPN or meter box and making good of previous surfaces i.e plaster work, painting of surfaces as in previous surfaces)
Supply and fix in repairs of MCB SPN DB 8 way double door,IP 43 protection,Glazed door, isolated neutral bar,insulated bus bar assembly,mechanical strength of IK09, complete all as specified and directed
Supply and fix in repairs of MCB SPN DB 4 way with 200 Amps rated bus bar double door, IP 43 protection,Glazed door, isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09, complete all as specified and directed
Supply and fix in repairs of MCB TPN 100 Amps 'B' Series 16 KA, 415 volts, complete all as specified and directed.
Supply and fix in repairs of RCBO's SP 40 Amps 'B' Series 20 ma,240 volts complete all as specified and directed.
Supply and fix in repairs of MCB SPN 32 Amps 'C' Series 10 KA,240 volts complete all as specified and directed.
Supply and fix in repairs of MCB SP 6 to 16 Amps 'C' Series 10 KA, 240 volts, complete all as specified and directed.
Supply and fixing Bulb holder angular PVC/Polycarbonate suitable for batten fittings, complete all as specified and directed.
Supply and fixing Decorative light frosted glass, 7 watt with chrome finish lamp with its accessories, complete all as specified and directed.
Supply and fixing LED Inverter Batten fitting 1x18 watts including Tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23.0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed.
Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to earth lead wire 4 mm dia by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar,funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execuation and earth works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I including taking out the old earthing material, complete all as specified and directed.
Taking down aluminium submain wire along with damaged casing caping / PVC conduite pipe from the wall roof or floor and making good distrubed surface, complet all as specified and directed.
S&F sub main wiring concealed with three run of single core (FRLSH) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.0 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size with proper colour coding and making electric connections, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Three run of 6.00 sqmm single core (FRLSH) PVC insulated copper conductor cable and one run of PVC conduit of suitable size will be measured as a one unit.
S&F sub main wiring with three run of single core (FRLSH) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.0 Sqmm drawing into and including PVC casing and caping of adequate size with proper colour coding and making electric connections , including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included chases of sinking for boxes cutting and making holes in wall/floor for passing in or through casing caping (ii) Three run of 6.00 sqmm single core (FRLSH) PVC insulated copper conductor cable and one run of PVC casing caping of suitable size will be measured as a one unit. .
Supply only LED Inverter bulb of 9 Watt (Warm white), complete all as specified and directed. Make- Havells B 22 CDL or equivalent to Philips/ CG/Havells
Supply and fixing of 35W LED building security light fittings in aluminium PDC housing, toughened glass cover,individual LEDs with secondary optics, covered with IP66 protection with in built surge protection of minimum 5 kV and repair/replacement warranty of minimum 3 years. Make: Surya SLE UL 45W IP66 LXN or its equivalent in Philips/GE
S&F for 32 mm dia GI tubing light grade bracket over all 1.2 mtr length with cutting as required and bend to shape with flat iron clamp of size 32 mm 2 Nos, suitable size of nut bolts and washers complete for fixing street light fittings on electric poles including taking down old unsv / fully rusted existing unsv one complete all as specified and directed.
Supply and fixing of elecric geyser of size 25 Ltrs vertical type, BEE 5 star rated, AC single phase 230 volts finishing, including PVC connection pipes, nuts and bolts, complete all as specified and directed.
M&L for cutting of circular hole at any type of wall suitable size for fixing of exhaust fan of size 300mm sweep, grouting 04 Nos 100mm long 12mm dia stud bolt including,making good to disturbed surfaces of wall to match as per the existing colour, complete all as specified and directed.
Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep metalic body with louver, complete all as specified and directed.
M&L for cutting of Square hole at any type of wall suitable size for fixing of exhaust fan of size 250mm sweep, grouting 04 Nos 100mm long 12mm dia stud bolt including,making good to disturbed surfaces of wall to match as per the existing colour, complete all as specified and directed.
Supply & fix exhaust fans AC single phase 230/ 240 V of size 250 mm sweep fiber body with louver, complete all as specified and directed.
S&F sub main wiring concealed with three run of single core (FRLSH) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 1.5 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size with proper colour coding and making electric connections, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Three run of 1.5 sqmm single core (FRLSH) PVC insulated copper conductor cable and one run of PVC conduit of suitable size will be measured as a one unit.
Excavation in trenches not Exe. 1.5 m wide and not Exe. 1.5m in depth for foundation, etc, or for shaft, wells, cesspits, manholes, pier holes, etc. not exc. 10 sqm on plan and getting out in soft/loose soil, complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil, complete all as specified and directed.
Supply and spread sand in trenches as sand cushioning to underground cable for protection with fine river sand and provide required cover after punning down complete all as specified and directed. Note : For the purpose of payment only punned thickness will be measured. (Note: Thickness of sand cushion after punning down will be measured and paid.)
M&L for common burnt clay building bricks (locally available best quality), sub-class ‘B’ designation 75 of size 230x115x75 mm to cover LT underground cables, laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and directed.
Removing surplus excavated materials (soil) upto a distance not exe 50 m and depositing where directed at a level n exe 1.5 m above the starting point complete all as specified and directed.
S&F in repair 40mm bore GI tubing “light grade” in trenches/ on pole for protection of cables, complete all as specified & directed.
Supply, laying connecting and testing XLPE insulated, PVC sheathed, armoured LT electric power UG cable (heavy duty), aluminium stranded conductor 1100 volts grade size 16 sqmm 4 core, laid through duct/ pipe / in trench etc. including cable glands & lugs complete all as specified and directed.
Taking down and refixing, old existing servicable MCB SPN DB's of any type and refixed with concealed wall including make good wall surface by plastering, painting and civil work, included complete all as specified and directed.
Taking down and refixing, old existing servicable Energy Meter of any type and refixed wall surface including make good plastering, painting and civil work deemed to be quoted rate complete all as specified and directed.
Taking down and refixing, old existing servicable MCB's SPN, SP, TPN, DPN any other size/ type and refixed including make good plastering, painting and civil work deemed to be quoted rate complete all as specified and directed.
Supply and Fix mirror light of 9 Watt (Warm white), complete all as specified and directed. Make- Havells LHLDESAARANB020 or equivalent to Philips/ CG/Havells
Supply& fixing ceiling fan of 1200mm working on BLDC Technology without remnote with all its accessories including taking down unserviceable ceiling fan with all accesories & submitting back to MES Store yard, complete all as specified and directed.
Supply and fixing LED fitting 1x18 watts including Tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with flexible cable from ceiling rose to light fitting, complete all as specified and directed. Make: Crompton/Helonix/Bajaj/Havells/HPL or equivalent make specified in CA.
Schedule of Credit
M/S SUBHASH BHATTACHARJEE
Lyngdohs Construction Company And Associates
M/s UB Enterprise
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .