Padauk / Veneer wall cladding and replacement of tiles, sanitary fittings UPVC windows and other allied works at AB/23 Bungalow under AE-II, PBSD, APWD, Port Blair

Amount

Providing and fixing in wall lining , with 12 mm thick marine plywood (IS : 710 green ply or equivalent) with necessary fixing arrangement and screws etc. complete

12 mm thick marine plywood (IS : 710 green ply or equivalent)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

Ist class paduak wood (cat-I A)

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

a) Glazed Vitrified tiles Matt/Antiskid finish of size i) Size of Tile 600 x 600 mm

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows of required size with necessary screws,excluding panelling which will be paid for separately, all complete asper direction of Engineer-in-charge.

a) Ist Class Padauk wood i) 35 mm thick shutter

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :

Ist Class Padauk wood Cat-I(A)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled ur panelled and glazed shutters 25 mm to 40 mm thick:

a) Float glass panes i) 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing in wall lining/ ceiling Calcium silicate Board, with necessary fixing arrangement and screws etc. complete

12 mm thick

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :

Two or more coats on new work

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/ 120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Providing and fixing factory made uPVC glazed/ wire mesh windows/ doors comprising of lead free uPVC multi- chambered frame, sash and mullion/ coupler (wherever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (whereever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia. with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/ mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh/ Glazing of plain/ toughened/ laminated/ double glass unit with/ without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (iii) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3 (iv) Sites with structure height more than 20m for all wind speeds.

a) Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. i) Using R2 series with frame (70mm & above) x (40mm & above) & both glazed and fly screen sash (25mm & above) x (50mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 meter).

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer-in-charge

Extruded section profile size 48x40 mm

Providing and fixing to existing door frames.

24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing bright finished brass handles with screws etc. complete:

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :

125x70x4 mm (ordinary type)

Providing and fixing brass sliding door bolts, ISI marked with nuts and screws etc. complete :

Providing and fixing 1st Class Padauk wood plain lining tongued and grooved, including wooden plugs complete with necessary screws (Frame work to be paid seperately) asper the archituctural drawing & as per the specified by Engineer-In-Charge.

25 mm thick panelling.

Providing and fxing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

a) For fixed portion i) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:

1:3:6 (1 cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form work for:

Foundations, footings, bases for columns

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

20 mm nominal dia Pipes

25 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

25 mm nominal dia Pipes

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :

25 mm dia

Providing and fixing CPVC ball valve of approved qaulity.

20 mm nomnal bore

25 mm nominal bore

Providing and fixing in wall lining/ ceiling WPC Board with necessary fixing arrangement and screws etc. complete.

6mm thich WPC board

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).

Medium shade pigment using 50% white cement 50% Grey cement

Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.

Providing and fixing wooden moulded beading to with iron screws, plugs etc all complete as per the direction of Engineer-in-charge.

a) 1st class Paduak wood cat-I(A) i) 25 x 25 mm

Providing and fixing wooden skirting moulded at one end with iron screws all complete as per the direction of Engineer-in-charge.

a) 1st class Paduak wood cat-I(A) i) 100mm wide and 25 mm thick

Cladding with 1st class paduak wood on the existing column, beam etc necessary screws etc. all complete as directed by Engineer-in-charge.

12 mm thick

Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washerscomplete.

Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P. brassbrackets and guard rail complete fixed with 40 mm long screws, rawlplugs etc., complete.

Providing and fixing Wall Hung Basin with Fixing AccessoriesSize: 575x465x200 mm of make jaquar or equivalent No.SLS WHT-6801 and full pedestal for SLS-WHT-6301 of approved quality as per the direction of Engineer-In-Charge.

Providing and fixing towel ring with concealed fittings arrangement of approved quality and colour of make Jaquar ( No. AKP - 35721P) or equivalent

Providing and fixing Soap Dish Holder of make Jaquar ( AKP-35731P) or equivalent ) after removing the existing soap dish and making good the same as per the direction of engineer in- charge.

Providing and fixing tumbler holder of make jaquar of model no. AKP 35741P or equivalent of good quality as per the direction of Engineer-in-Charge.

Providing and fixing Single towel rail 600 m long of make Jaquar ( AKP 35711P) after removing the existing towel rail and making good the same as per the direction of engineer in- charge.

Providing and fixing Toilet roll holder of make Jaquar AKP-35751P or equivalent of approved quality as per the direction of Engineer-In-Charge.

Providing and fixing Hand Shower (Health Faucet) with 8 mm dia, 1.20 meter long flexible tube & wall Hook (Code No.ALD- 573) Make Jaquar.

Providing and fixing Central Hole Basin mixer wihout popup waste System with 450 mm long Braided Hosesof Model No. CON- 167KNB of make Jaquar or equivalent of good quality as per the direction of Engineer-In-Charge.

Providing and fixing wall mixer 3-in-1 system with provision for both hand shower and over head shover complete 115 mm long bend pipe,connecting with 115 mm long bend pipe connecting legs & wall flange (witout hand & Over head shower) of make Jaquar model No Con-281 KN of good quality.

Providing and fixing Bottle Trap (with internal partition) 32 mm size with 300 mm 7 190 mm Long wall Connection pipes & Wall Flanges Model No. ALD-769L 300 x 190 of make jaquar or equivalent as per the direction of Engineer- In -Charge.

Providing and fixing Waste Coupling 32 mm size full thread with 130 mm height of make Jaquar (ALD-709L130) of good quality as per the direction of Engineer-In-Charge.

Providing and fixing Angular stop cock with wall flange Kubix Prime of make Jaquar (KUP-CHR-35053PM) of good quality as per the direction Engineer-In-Charge.

Providing and fixing hot &cold lead connector pupe 450 mm long braided hose with two 15 mm nuts & rubber washers without nipple of make Jaquar (ALD- 805B)after removing the existing connector pipe and making good the same as per the direction of engineer in- charge.

Providing and fixing overhead shower of 150 x 150 mm Square shape single flow (ABS Body chrome plated with gray face plate) with rubit cleaning system of make Jaquar (OHS-35495) of good quality as per the direction Engineer-In-Charge.

Providing & fixing Shower Arm 400 x 25 x 25 mm square shape for wall mounted showers with flange of make Jaquar (SHA-455L600) of good quality as per the direction Engineer-In-Charge.

Providing and fixing C.P Brass 2 way bib cock of of make Parryware/Jaquar ( LRY- 38041) or equivalent as per the direction of engineer in charge.

Providing & fixing hand shower of 27 x 27 mm square shape single flow (ABS Body & face plate Chrome plated)with rubit cleaning system of make jaguar (HSH-35537) including shower tube of 12 mm dia & 1.5 m long with Nuts of make Jaguar (SHA-549D12) & premium wall bracket for hand shower, 35 mm dia & 100 mm long round shape of make Jaguar (SHA-555) of good quality as per the direction of Engineer-In-Charge.

Providing and fixing in wall lining with ACP sheets with necessary fixing arrangement and screws etc. complete

3 mm thick

Providing and fixing Single piece-water closet with UF soft close seat cover, Hinges, fixing Accessories Set and Accessories Set, Cistern Fittings of Size 365 x 655 x 765 mm S/P Trap 180 mm of model no. LYS-WHT-38851P180UFSM of Make Jaquar or Equivalent of good quality as per the direction of Engineer-In-Charge.

Providing and fixing Cat-I A paduak timber handrail with semi circular top rail of size 4" x 3" supported over intermediate Sq. post (4" x 4") of height 0.88 mtr with c/c 1.00 mtr interval and 8 nos. baluster of size 1" x 1" between 2 intermediate post and these baluster fixed to the top rail and bottom rail of size 4" x 3" all completely fixed together with necessary screws wooden plugs, adhesives etc. all complete as directed by Engineer-In-Charge.

Providing and fixing plywood 3 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with :

Decorative veneer facings of approved manufacture

M/s BRO s

HAZRA CONSTRUCTION

Mega Engineers and Builders

B M SINGH