Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.7 LAccepted-Finance MOURYA HEIGHTS SATAVNAGAR HANDEWADI ROAD HADAPSAR PUNE 28 | PUNE | MAHARASHTRA | 411028 | L1 | Accepted-Finance LOWEST BIDDER | |
| 2 | L2₹44.3 L+₹3.6 L (8.96%)Rejected-Finance S NO 211 BEHIND SANE GURUJI HOSPITAL VIDHYA VIHAR HSG SOC HADAPSAR PUNE 411 029 | 411029 | L2 | Rejected-Finance RATE HIGH | |
| 3 | L3₹45.1 L+₹4.4 L (10.8%)Rejected-Finance 02 NERLE NERLE YEWALEWADI ROAD NERLE SANGLI MAHARASHTRA 415406 | SANGLI | MAHARASHTRA | 415406 | L3 | Rejected-Finance RATE HIGH | |
| 4 | L4₹45.7 L+₹5.0 L (12.3%)Rejected-Finance | L4 | Rejected-Finance RATE HIGH | |
| 5 | L5₹45.9 L+₹5.2 L (12.8%)Rejected-Finance A 2 206 SAI DWARKAMAI NIBM ROAD KONDHWA PUNE 411 048 | PUNE | MAHARASHTRA | 411048 | L5 | Rejected-Finance RATE HIGH |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
15 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Pune
GE South Pune
CERTAIN PETTY REPAIRS AND DAY TO DAY B/R AND E/M COMPLAINTS IN MD AND OTM ACCN UNDER AGE B/R-II OF GE (SOUTH) PUNE
2023_MES_604531_1
8452 GE SOUTH PUNE
Open Tender
Civil Works
Item Rate
330 days
GE South Pune
As per NIT
8 documents required · 8 mandatory
₹500
GE South Pune
₹90,000
23 Sept 2023
20 Jun 2023
17 Jul 2023
21 Jun 2023
15 Jul 2023
8 Jul 2023
Amount
Attending day to day complaints of plumbing work by deploying one plumber & one helper for 8 hrs in working day to attend any type of complaints such as repairs of taps / cocks, showers, towel rail / rings, flush tank, pipe lines, fixing of new taps / cocks, showers, towel rail / rings, flush tank, water tanks, pipe lines and all plumbing works complaints received and ordered by Engineer-in-charge. The plumber should have necessary equipment / tools including ladder etc as required for one plumber for 08 hrs working complete all as directed by Engr-in-Charge. Note :- (i). Each Job shall contain 8 hrs working of plumber per day to attend various complaints of plumbing received by the office / Armaan each day. (ii). All minor complaints will be attended within 24 hrs and major complaints within 7 days (Major / Minor complaint shall be decided by Engr-in-Charge and in case of dispute if any, the decision of GE shall be final and binding.
Attending day to day complaints of carpenter work by deploying one carpenter to attend any type of complaints such as repairs to doors, windows, ventilators, cupboards, shelve etc and fixing of doors, windows, ventilators, cupboards, shelve etc, fixing of fittings of doors, windows, ventilators, cupboards, shelve etc and all carpenter works / complaints received and ordered by Engineer-in-charge. The carpenter should have necessary equipment/ tools including ladder etc as required for one carpenter for 08 hrs working complete all as directed by Engr-in-Charge . Note :- (i). Each Job shall contain 8 hrs working of plumber per day to attend various complaints of plumbing received by the office / Armaan each day.
M&L for brickwork with fly ash bricks, straight or curved on plan exc. 6m mean radius, built in CM 1:6 including demolition of brick work or stone boulder masonary built in cement or cement lime mortar of any description complete all as specifed and as directed.
M&L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 including demolition of brick work or stone boulder masonary built in cement or cement lime mortar of any description complete all as specifed and as directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 to be finished even and smooth (without using extra lime or cement) complete all as specifed and as directed.
Taking down cement plaster and M&L for 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 to be finished even and smooth (without using extra lime or cement) complete all as specifed and as directed.
M&L for prepration of newly plastered wall surface and applying two coat of oil bound distemper over and including 2mm thick wall care putty complete all as specified and as directed.
M&L for prepration of newly plastered wall surface and applying two coat of cement based paint over a coat of chalk whiting complete all as specified and as directed.
Taking down shutters of any description n.exc 1.0 sqm each and rescuring or easing & adjusting after repair in door opening and connected carpentry work and refixing at same opening complete all as all specified.
Taking down shutters of any description exc 1.0 sqm but n.exc 2.00 Sqm each and rescuring or easing & adjusting after repair in door opening and connected carpentry work and refixing at same opening complete all as all specified.
Taking down chowkhat /frame of door /window/ ventilators with shutter (without taking off shutter from the frame ) area not exc 1.5 Sqm a each complete all as specified
Taking down shutters of any description exc 1.0 sqm and n exc 2 sqmtr complete all as specified & as directed
Taking down chowkat or frame with shutters (without taking of shutters from the frame) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and as directed.
S&F 35 mm thick factory made 2nd class hardwood gauged and skelton shutters open rebated and prepared to receive glass / gauze etc ( without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR part-I Section 8 cluse 8.24(a) and Fitted to chowkats complete all as specified and as directed.
S&F 35 mm thick factory made 2nd class hardwood plain framed panelled shutters/ any number member of panels) with panels of timber flat on both sides of wood particle board with commercial face veeners. The size of rail and stile as per IS : 1003 (Part I ) kiln seasoned and chemically pressure treated all as specified and as directed.
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in opening complete all as specified and as directed by the Engineer-in-C- harge.
S & F factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles). with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site complete all as specified and as directed by the Engineer-in-Charge.
S & F pressed steel frames of size 105mm X 60 mm for doors with one or more rebates including necessary lugs, hinges, lock strikes plate, including M & L for providing PCC type B-0 ,1:2:4 (using 12.5 mm graded stone aggregate) to fill up the hollow portion of the frame including making good the distrubed surface complete all as specified and directed.
S & F pressed steel frames of size 125mm X 60mm for doors with one or more rebates including necessary lugs, hinges, lock strikes plate, including M & L for providing PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) to fill up the hollow portion of the frame including making good the distrubed surface complete all as specified and directed.
M&L for running welding in repairs not exc. 6mm thick plates and angles complete all as specified and as directed.
S&F Aluminium powder coated single leaf door on pivots alongwith hydraulic door closer door lock , handle,5mm th plane glass fixed with rubber beading in top panel and glazing clips MS clamps and 12mm th laminated particle board as bottom pannel both side laminated) using following sections as given in 'JINDAL' catlogue complete all as specified and as directed. (a) Rectangular tube - 14005 (b) Vertical rail - 19501 (c) Top rail -19503 (d) Middle rail -20060 (e) Bottom rail- 19511
M & L for double action Floor Spring Hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing poivet made of brass, other parts made of brass, other part made of mild steel heavy duty and fixed, complete all as specified and directed
S&F in repairs three track sliding window with two or more shutter with 4mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.
S & F in repairs ventilators/louvers using 4mm thick x 10cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed (a) SP : 20048 (b) Glazing clips : 19352
M&L for MS framed work conforming to grade E-165 (Fe-290) or Fe-310-O of MS angle or other sections, such as grills, gratings with ends of bar shouldered and / or riveted or forged into spikes; framed guard bars; railings and like completed all as directed by Engineer-in-charge.
M&L for 12mm thick prelaminated particle board both side decorative face, including providing second class hard wood 6mm thick beading for edges of board alround all as specified and directed by Engr in Charge.
M&L for 19mm thick prelaminated particle board both side decorative face, including providing second class hard wood 6mm thick beading for edges of board alround all as specified and directed by Engr in Charge.
S&F 19mm thick block boards, grade 2 quality, commercial type, fixed with screws to timber frame work including applying two coats of synthetic enamell paint over a coat of pink primer and teak wood lipping all around the edges as in Kitchen cupboards and shutters of Almirahs / Kitchen cupboards including dismantling boarding any descriptionall as specmed and directed
S&F continuous (Piano) hinges, mild steel bright finished or electro galvanised width of flap 30mm complete all as specified and as directed.
Supply only continuous (Piano) hinges, mild steel bright finished or electro galvanised width of flap 30mm complete all as specified and as directed.
S&F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.
S&F in repairs 100mm Hasp and staple, aluminum anodised including bolt to hinge plate and fixed with screws complete all as specified and as directed.
Supply only 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.
S&F in repairs Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed
S&F in repairs Door closer hydraulically regulated, aluminium extruded section body, design No. 3, universal type, suitablefor door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.
Supply and fix 100mm size of butt hinges, medium weight cold rolled mild steel complete all as specified and as directed.
Supply only 100mm size of butt hinges, medium weight cold rolled mild steel complete all as specified and as directed.
Supply & fix aluminium anodised sliding door bolts 300 mm size with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
Supply only aluminium anodised sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.
Supply and fix 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified.
Supply only 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.
Supply only 150 mm size double action spring hinges mild steel with steel wire spring stove enamelled bIack complete all as specified and as directed.
S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
Supply only 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
Supply only mortice lock brass body 4 lever including two Nos brass handle suitable for wooden shutters complete all as specified and as directed.
Supply only 20 mm bore aluminium powder coated curtain rod of medium weight complete all as specified and as directed.
Supply only aluminium powder coated fancy type bracket suitable for 20 mm bore curtain rod complete all as specified
Supply only CP towel rail 600 mm long 20mm dia Fixed with plastic gutties with steel screws etc. complete all as specified and as directed.
S&F stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples to steel or wooden windows/door/shutters/frames etc. complete all as specified and as directed.
S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to steel or wooden windows / door / shutters / frames etc. complete all as specified and as directed.
Supply only 10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as directed and as specifed
Supply and fixing 15mm GI tubing "medium grade" with and including all fitting and fixtures including taking down complete all as specifed and as directed.
Supply and fixing 20mm GI tubing "medium grade" with and including all fitting and fixtures including taking down complete all as specifed and as directed.
Supply and fixing 25mm GI tubing "medium grade" with and including all fitting and fixtures including taking down complete all as specifed and as directed.
Supply only fancy type brass chromium plated bib tap for iron pipe of 15mm bore fancy type with crutch or butterfly handle screwed down high pressure complete all as specified.
Supply only 15mm bore brass chromium plated fancy type, pillar tap with fly nuts capstan head screwed down high pressure with or without lettered hot or cold with long scewed shank complete all as specified and as directed.
Supply only 15mm size ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 142gms), complete all as specified and directed.
Supply only 20mm size ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms), complete all as specified and directed.
Supply only 25mm size ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 455gms), complete all as specified and directed.
Supply only PVC connection pipe 600mm long as suitable with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and as directed.
Supply only chromium plated brass stop cock fancy type (concealed type) screwed both ends high pressure for 15mm bore iron pipe or ferrule, complete all as specified and as directed.
Supply only Chromium plated brass angle valve suitable for 15mm bore pipe, complete all as specified and as directed.
Supply only shower rose with arm, chromium plated brass fancy type 125x125 mm with or without swivel any size, including fixing to steel pipe or union, complete all as specified and as directed.
Supply only PTMT waste fitting 32/40mm bore suitable for WHB / sink complete all as specified and as directed.
Supply only waste fitting (coupling) brass chromium plated 32mm dia for urinal complete all as specified and as directed.
Supply only PVC syphon with rod for low level flushing cistern incl PVC handle with adjustable lever (flushing cistern kit ) complete all as specified and as directed.
Supply and fix Rotational moulded polyetylene water storage tanks (cylindrical vertical with closed top) of 500 Litres capacity, double layered, hoisted and fixed in position and connecting up pipes and ball valve complete set of PTMT, securing access covers including disconnecting existing tanks, complete all as specified and as directed.
Supply and fix Rotational moulded polyetylene water storage tanks (cylindrical vertical with closed top) of 1000 Litres capacity, tripple layered, hoisted and fixed in position and connecting up pipes and ball valve complete set of PTMT, securing access covers including disconnecting existing tanks, complete all as specified and as directed.
Supply only flush handle PVC with adjustable Lever and hook suitable for low level flushing cistern complete all as specified and as directed.
Supply only PVC flush pipe of 32mm dia pipe suitable for connecting to low level flushing cistern including jointing to WC complete all as specified and as directed.
Supply only 32mm bore and 750mm long PVC waste pipe for WHB complete all as specified and as directed.
Supply only 38/40 mm bore and 75 cm long PVC/waste pipe for sink complete all as specified and as directed.
Supply only Plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover including mild steel chromium plated hinging device complete all as specified and as directed.
Supply and fix in repairs Vitreous china wash down water closet pan (Pedestal pattern) white including 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and as directed.
Supply and fix in repair Vitreous china squatting pan (Orissa pattern) long pan including provision of lime concrete bedding fixed in repair of size 580x440mm white with intergral footrest with 'P' or 'S' trap complete with and including 10 litres capacity flushing cistern and flush pipe, complete all as specified and as directed.
S & F in repairs wash hand basins, vitreous china of size 550mm X 400mm ( flat back or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of supply of 32 mm bore waste fittings brass chromium plated with long screwed shanks and fly nuts,screwed for iron pipe and fixing waste pipe including 15 mm bore CP fancy type Pillar cock with long shank etc.complete all as specified and as directed.
Supply only stainless steel tie hanger fixed in cupboard complete all as specified and directed by Engr-in-Charge.
Supply only HDPE PVC lid (cover) for 500 ltr to 2000 Ltrs capacity PVC tank complete all as specified and as directed.
Supply only 2mm thick PVC mirror cabinet of size (450x325x120mm) complete all as specilied and directed.
Supply only CP brass wall mixer for mixing of hot & cold water as approved screwed down for 15mm dia iron pipe complete all as specified and as directed.
Supply only 15 mm bore two way bib tap chromium plated cast copper alloy long body with wall flange complete all as specified and directed
Supply only Health faucet cromium plated with 1250mm long pipe with ABS wall hook, complete all as specified and as directed.
Supply only sheet glass (10mm thick) corner shelf 250mm radius including CP railing , complete all as specified and as directed.
Supply only stainless steel chromium plated grating (round) 125 mm dia fixed over floor / nahani trap (with hole OR without hole), complete all as specified and as directed.
Supply only soap dish chromium plated brass fixed with brass screws as in repair, complete all as specified and as directed.
Supply only toilet paper holder brass chromium plated complete all as specified and as directed.
Supply only stainless steel plate rack of size 90x80x25 cm size made out of 0.80mm thick sheet complete all as specified and as directed.
Supply & Fix in repairs sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs, CP Brass waste coupling washers and waste pipe and fitting including bedding in cement mortar to dwarf wall or including fixing & providing cantilever brackets and connecting union to pipe, over all size of sink 1020 mm X 510 mm, bowl size 460 mm X 360 mm X 160 mm complet all as specified and as directed.
Supply and fix in repairs sink made of stainless steel 1mm thick for kitchen with plugs, washers and CP Brass waste coupling, waste pipe and fitting including bedding in cement mortar to dwarf wall or including fixing & providing cantilever brackets and connecting union to pipe, over all size of sink 495mm X 420mm, bowl size 410 mm X 330 mm X 160 mm complete all as specified and as directed.
S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, complete all as specified and as directed.
S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, complete all as specified and as directed.
S&F in repairs high density 50mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 with necessary socket, elbow & bend etc complete all as specified and as directed.
S&F in repairs PVC (SWR) bends with access door for 110mm bore complete all as specified and as directed.
S&F in repairs PVC (SWR) bends with access door for 75mm bore complete all as specified and as directed.
S&F in repairs PVC (SWR) Tee with access door for 100mm bore complete all as specified and as directed.
S&F in repairs PVC (SWR) Tee with access door for 75mm bore complete all as specified and as directed.
Supply only brass chromium plated towel ring including a pair of CP brass bracket complete all as specified and directed.
Supply only brass chromium plated towel rack 600mm size including a pair of CP brass bracket complete all as specified and directed.
M&L for patch repairs to plastering 15mm thick in CM 1:4 including preparing roughening and cleaning the surface, making good, finishing even and smooth without using extra cement in patches area n exc 1.50 Sqm each patch including taking down existing plaster complete all as specified and directed
M&L for non skid ceramic colored tiles 7 to 8mm thick, (square/ rectangular) area of each tile exceeding 0.09 Sqm but not exceeding 0.18 Sqm in flooring etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 including dismantling of old tiles of any description or thickness and removing the same from site complete all as specified and as directed.
Dismantling of old tiles of any description or thickness and removing the same from site and M&L for glazed ceramic colored tiles 7 to 8mm thick, (square / rectangular) area of each tile exceeding 0.13 Sqm but not exceeding 0.18 Sqm in vertical surfaces etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 10mm thick backing coat in CM 1:4 including taking down existing cement plaster complete all as specified and as directed.
M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges including necessary form work required, complete all as specified and directed.
M&L for repairs of 50mm thick in patches to floor etc and like in PCC 1:2:4 type B-1, including preparing rounghening / demolition and cleaning the surface, making good, finishing even and smooth without using extra cement in patches area, complete all as specified and directed.
M & L for cleaning of roof area not exceeding 300 Sqm each including chajjas of bldgs front, rear and side complete clearing mouth of rain water pipes and spouts in chajjas etc complete including removals of roots of vegetative growth, algae, small plants etc complete all as specified
Supply only two way angle valve 15mm bore fancy type chromium plated, brass copper alloy, complete all as specified and directed.
S&F in repairs 3mm thick polycarbonate translucent sheets fixed with coach screw and washer as in gate / wall etc, complete all as specified and directed.
S&F in repair for Gypsum ceiling board for ceiling prepainted finish, 595 x 595 x 9 to 9.5 mm thick in size, of approved brand / make, laid over and including grid work of size 600 x 600 mm, made out of 0.5 mm thick GI tee 32 x 24 mm for main, 25x 44 mm for cross tee and 20 x 20 mm angle fixed on wall, powder coated finish on exposed faces of tee and angle hung from celling using 2 mm thick GI suspension wires spaced at 1200 mm on main runners including making niches for fans / light complete all as specifed and directed.
Dismantling plain or corrugated, semi corrugated, etc sheets of any type in roof covering complete all as specifed and directed.
Dismantaling mild steel or wrought Iron in any position complete all as specifed and directed.
M&L for 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, wall etc fixed with L-type or J-type or cranked hook bolts complete all as specified & directed.
M & L for asbestos cement two piece adjustable ridge 6mm thick fixed with L or J bolts with washer etc complete all as specified & directed.
M&L for MS framed work conforming to grade E-165 (Fe-290) or Fe-310-O of MS angle or other sections, such as grills, gratings with ends of bar shouldered and / or riveted or forged into spikes; framed guard bars; railings and like completed all as directed by Engineer-in-charge.
S&F 0.80 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of (zinc coating @ 275 gram per sqm inclusive of both sides), fixed with 'L' type or 'J' type or cranked hook in roof complete all as specified and as directed.
S&F 0.80mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of (zinc coating @ 275 gram per sqm inclusive of both sides) complete all as specified and directed.
S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F roof sheeting prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in ridges, fixed with self tapping screws complete all as specified and directed.
Dismantling of single layer Mangalore pattern tiles or similar tiles in roofing etc complete all as specified and directed
Dismantling battens for tiles shingles etc of any size including tiling fillets exc 15 cm spacing etc complete all as specified
M&L for roof tiles, Mangalore pattern Gde 'AA' interlocking at side joints laid dry complete all as specified and directed.
Fixing only for roof tiles Mangalore pattern interlocking at side joints laid dry (except tiles) complete all as specified and directed.
M&L for Ridge or hip tiles to suit Mangalore pattern roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and directed.
Fixing only ridge or hip tiles to suit Mangalore pattern roofing tiles complete all as specified and directed.
M&L for IInd class HW clean sawn battens exceeding 5 and n. exc 15 sqcm in cross section, spaced at 30cm centres complete all as specified and directed.
Fixing only IInd class HW clean sawn battens at 30cm centres exc 5 and n exc 15 sqcm ( Except batten) complete all as specified and directed.
Dismantling timber scantling in any position (unframed wok) exc 40sqcm in section complete all as specified and directed.
S&F IInd class hard wood timber clean sawn as in scantling complete all as specified and directed.
S&F in repairs IInd class hard wood 20mm thick boarding fixed with nails in any situation planed one side with butt joints complete all as specified and directed.
Dismantling timber scantling unframed in post, rafters, purlins etc under 40 Sqcm in section, complete all as specified and directed
M&L for plain fillets of IInd class hard wood exc 13 but n exc 25 sqcm in section square rectangular or triangular in section secured with screwes complete all as specified and directed.
M&L for preparing surfaces of slate battens, any size and spacing prepared and treated all over (measured overall on one side only, spaces not deducted) with two coats creosote oil complete all as specified and directed.
M & L for carrying out non destructive water proofing treatment to sunken slab of toilets consisting of one WC, one nahani trap at bathroom and one nahani trap at Kitchen including cleaning of surface with wire brush removing loose particles, greasy elements, detecting leakage point, sealing joints of tiles/cracks in floor and wall and injecting injection of CORESEAL 135A / CORESEAL 135B all as per manufacturers instructions and as directed by Engr-in-Charge. Note :- The rate is inclusive of replacement of any defective fittings/fixtures of any type/material elbows, bend, tee, reducer single 'Y', double 'Y' with cleaning eye and concealed piece of pipe below floor as well as between wall and bend. Makes for item :- AQUATYTE, CREAT SEAL grouting compound of Ashwin Enterprises, GPSS (ground penetrating sealing system) of Saga polytech or similar brand as approved by Accepting Officer.
Removal of air lock / blockage of water in GI tubing 15/20mm bore of any type including taking down (if required), cleaning the pipe or fitting etc and refixing the same in position complete all as specified and as directed
M&L for PCC 1:2:4 type B-1 ( using 20mm graded crushed stone aggregate) as in 50mm thick flooring, finishing surfaces of concrete topping even and smooth with using extra cement, complete all as specified and directed.
M&L for providing cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) 75 mm thick as in plinth protection laid in bays not exceeding 2 sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection including demolition of existing concrete all as specified.
Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc of 250 to 500 Itr (Capacity tanks incl washing the tanks and draining out dirty water complete all as directed.
Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc of 500 to 1000 Itr (Capacity tanks incl washing the tanks and draining out dirty water complete all as directed.
Hacking out old broken glass of any thickness/Size or quality from aluminium door / window frame fixed With rubber packing and aluminium beading tinted glass and S&F 5.5mm thick sheet glass plain ordinary quality area exceeding 0.50 sqm each pane complete all as specified and as directed.
Hacking out old broken glass of any thickness/Size or quality from wooden/metal frame fixed With putty / beading & S&F 3mm thick sheet glass, plain or frosted ordinary quality not exc 0.5 sqm in each pane complete all as specified and as directed.
S&F in repairs Aluminium sheet 0.5 mm thick, fixed with steel screws to doors shutters complete all as specified and as directed.
M&L for prepration of new wooden surfaces and applying two coats of synthethic enamal paint over a coat of pink primer complete all as specified and as directed.
Supply only Plain head, lost head, lath, mild steel wire nails, bright finished nails of length not exc 150mm complete all as specified and as directed.
Supply only Mild steel wood screws, bright finished, with slotted countersunk head, designation 4 to 10 (2.74 to 4.88 mm nominal shank dia) n. exc 50 mm long complete all as specified and as directed.
All as per Ser. item No 143.00 but CP screws complete all as specified and as directed.
Supply only Mild steel wood screws, bright finished, with slotted countersunk head, designation 12 to 14 (5.59 to 6.30 mm, ditto), exc 50 mm but n. exc 100 mm long complete all as specified and as directed.
All as per item No 145.00 but CP screws complete all as specified and as directed.
M&L for 2nd class hard wood, sectional area n. exc. 3 Sqcm, Plain fillets, beadings, square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and as directed.
Supply only PPC Cement, 53 garde, complete all as specified and as directed.
Supply only White Cement (Birla / JK Cement or equivalent) complete all as specified and as directed.
Supply only Fine aggregate (crushed sand) complete all as specified and as directed.
M & L for granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, Door cills ,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of old unserviceable stone slabs and tiles of any description or thickness complete all as specified and as directed.
Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.
S & F Machine cut cuddappa stone 20 to 22 mm thick both side polished bedded & jointed in CM (1 : 3) including dismantling of old unserviceable stone slabs and tiles of any description or thickness complete all as specified and as directed.
M&L for preparing new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.
Taking down aluminium point wiring( light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants holder,regulators sockets, light fitting etc removing materials deposited to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.as per engr-in-charge.
Taking down MCB DB / Main switch, old unserviceable / worn out aluminium sub main of any type and size complete all as specified and as directed.
M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 1.5 Sq.mm(Nominal area),single core,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked in and including heavy duty,PVC casing caping including all accessories etc.,heavy duty ISI marked,mild steel concealed sunken boxes,1.6 mm thick and 60 mm depth with earth dolly duly painted with two coat of black bituminious paint over a coat of red oxide primer with laminated bakelite sheet of min. thickness of 3mm suitable for switches/sockets,etc,including PVC insulated stranded copper conductor 1.5 Sq.mm (nominal area) single core green PVC insulated FRLS cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for the following:- Note:- Making good of disturbed surfaces will be done by contractor without any extra cost to the Department (a). One light/fan/ point controlled by one switch.
(b). One 5 Amps Socket outlet point controlled by one switch on independent board.
(c). One 5 amps socket outlet point on same board with other switches
(d). One bell/buzer point controlled by one bell push
M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 2.5 Sq.mm(Nominal area),single core,,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked in and including heavy duty,PVC casing caping including all accessories etc.,heavy duty ISI marked,with mild steel concealed sunken boxes 1.6 mm thick & 60 mm depth with earth dolly duly painted with two coats of anti corrosive paint over of red oxide primer, internally, covered with laminated bakelite sheet of min. thickness of 3mm sheet suitable for switches, including PVC insulated stranded copper conductor 2.5 Sq.mm (nominal area) single core green PVC insulated cable as earth and connecting to earth dolly for 15 amps socket outlet point on independent board complete and including cutting and chases in the wall for box complete all as specified and as directed. Note:- Making good of disturbed surfaces will be done by contractor without any extra cost to the Department
M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 1.5 Sq.mm(Nominal area),single core,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked in the existing conduit ,with mild steel concealed sunken boxes with earth dolly with laminated bakelite sheet of min. thickness of 3mm sheet suitable for switches,sockets,etc including PVC insulated stranded copper conductor 1.5 Sq.mm (nominal area) single core green PVC insulated FRLS cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for the following:- Note:- Making good of disturbed surfaces will be done by contractor without any extra cost to the Department (a). One light/fan point controlled by one switch.
(b). One 5 Amps Socket outlet point controlled by one switch on independent board.
(c). One 5 amps socket outlet point on same board with other switches
(d). One bell/buzer point controlled by one bell push.
M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 2.5 Sq.mm(Nominal area),single core,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked the existing conduit ,with mild steel concealed sunken boxes 1.6 mm thick & 60 mm depth with earth dolly duly painted with two coat of black bituminious paint over a coat red oxid primer with laminated bakelite sheet of min. thickness of 3mm sheet suitable for switches, including PVC insulated stranded copper conductor 2.5 Sq.mm (nominal area) single core green PVC insulated FRLS cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for 15 Amps socket outlet on independent board complete all as specified and as directed. Note:- Making good of disturbed surfaces will be done by contractor without any extra cost to the Department
M & L for submain wiring complete with two single core 4 Sqmm PVC insulated, unsheathed multi stranded copper conductor FRLS cable, 1100 volts, FR grade in existing conduit, including continuous PVC insulated copper earth wire 4 Sqmm including making good of disturbed surfaces with existing complete all as directed. (Note :- 3 runs of 4 Sqmm conductor and earth wire shall be measured as one unit length.)
M & L for submain wiring complete with two single core 6 Sqmm PVC insulated, unsheathed multi stranded copper conductor FRLS cable, 1100 volts, FR grade in existing conduit, including continuous PVC insulated copper earth wire 4 Sqmm including making good of disturbed surfaces with existing complete all as specified and as directed. (Note :- 2 runs of 6 Sqmm conductor and one run of 4 Sqmm earth wire shall be measured as one unit length.)
M & L for submain wiring complete with two single core 10 Sqmm PVC insulated, unsheathed multi stranded copper conductor FRLS cable, 1100 volts, FR grade in existing conduit, including continuous PVC insulated copper earth wire 6 Sqmm including making good of disturbed surfaces with existing complete all as directed. (Note :- 2 runs of 10 Sqmm conductor and one run of 6 Sqmm earth wire shall be measured as one unit length)
M&L for point wiring with 1.5 sqmm PVC insulated copper conductor FRLS cable 1100 Volts grade complete with & including PVC casing and caping and accessories with PVC ISI marked switch board, mounted on surface of walls including continuous PVC insulated copper earth wire 1.5 Sqmm connected to common earth dolly, for the following :- One light/fan/ point controlled by one switch.
One 5 Amps Socket outlet point controlled by one switch on independent board.
One 5 amps socket outlet point on same board with other switches
One bell/buzer point controlled by one bell push
M & L for point wiring with 2.5 Sqmm copper conductor FRLS cable for 15 amps socket outlet point on independent board and continuous PVC insulated copper earth wire 1.5 Sqmm in PVC casing and capping and including PVC mounted switch board complete all as specified and as directed.
M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 1.5 Sq.mm(Nominal area),single core,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked in and including heavy duty, PVC rigid conduits 20 mm or higher dia as reqd at site, totally concealed in walls / floors / ceiling including all conduit accessories / fittings / junction boxes/ inspection covers etc; of heavy grade, ISI marked and sunk terminal boxes of factory made pressed steel housing, totally concealed in walls suitable for modular switch socket accessories with earth dolly with suitable modular plate etc, including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for the following:- Note:- Making good of disturbed surfaces will be done by contractor without any extra cost to the Department One light/fan/ point controlled by one switch.
One 5 Amps Socket outlet point controlled by one switch on independent board.
One 5 amps socket outlet point on same board with other switches
M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 2.5 Sqmm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked in and including heavy duty, PVC rigid conduits 20 mm or higher dia as reqd at site, totally concealed in walls/ floors/ ceiling including all conduit accessories/ fittings/ junction boxes/ inspection covers etc; of heavy grade, ISI marked and sunk terminal boxes of factory made pressed steel housing, totally concealed in walls suitable for modular switch socket accessories with earth dolly with suitable modular plate etc, painted with two coats of anti corrosive paint over of red oxide primer, internally,covered PVC insulated stranded copper conductor 2.5 Sq.mm (nominal area) single core cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for 15 amps socket outlet point on independent board Note:- Making good of disturbed surfaces will be done by contractor without any extra cost to the Department
S&F modular type switch 6A single pole, one way, 240 volts, Cat.No 6730 00 Make-Legrand "Myrius series" or of equivalent specified here-in-after complete all as specified and as directed.
S&F multipurpose socket outlet 16A -2/3 pin,2 module for 230 volts flush type.cat.No 6730 42 Make-Legrand "Myrius series" or of equivalent specified here-in-after complete all as specified and as directed.
S&F modular type switch 16A single pole, one way,1 module, 240 volts, Cat.No 6730 00 Make-Legrand "Myrius series" or of equivalent specified here-in-after complete all as specified and as directed.
S&F modular universal socket 2 module outlet 6 amps 5 pin 230 volts flush type complete all as specified and as directed. (Make-Legrand : "Myrius series" or of equivalent specified here-in-after.)
S&F in replacement of modular ceiling fan step regulator 100W, 2 module, electronic step type, suitable for fan 48"/56" sweep complete all as specified and as directed. (Make-Legrand,"Myrius series" or of equivalent specified here-in-after)
S & F 240 V, 20 Amp Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB complete all as specified and as directed.
S&F piano type switch 5 amps single pole,240 volts complete all as specified and as directed.
S&F bell push, flush type, 5 amp, 240 volts complete all as specified and as directed.
S&F bell electrical ding dong including hard wood board bell push, flush type, 5 amp, 240 volts complete all as specified and as directed.
S&F ceiling rose surface type three terminals,240 volts complete all as specified and as directed.
S&F socket outlet 5 amps 5 pin 230 volts flush type on same board complete all as specified and as directed.
S&F socket outlet multipurpose 2 in 1, 5/15 amps, 230 volts flush type complete all as specified and as directed.
S&F piano type switch 15 amps single pole, 240 volts complete all as specified and as directed.
S&F lamp holder (Angle / bracket) insulated body, with back plate for batten fittings with 5 watt LED bulb etc. complete all as specified and as directed.
S&F in replacement of ceiling fan regulator two module, electronic step type, delux, suitable for fan 48"/56" sweep complete all as specified and as directed.
S&F bell push, flush type, 5 amp, 240 volts, Modular type complete all as specified and as directed.
M & L for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 4 sqmm in and including PVC casing caping and making good of disturbed surfaces with existing complete all as directed by Engineer-in-Charge. (Note :- 3 runs of 4 Sqmm conductor and earth wire shall be measured as one unit length.)
M & L for Sub main wiring complete with two single core 6 sqmm ,1100volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 6 sqmm in and including PVC casing caping and making good of disturbed surfaces with existing complete all as directed. (Note :- 3 runs of 6 Sqmm conductor and earth wire shall be measured as one unit length.)
M & L for Sub main wiring complete with four single core 6 sqmm ,1100volts grade, PVC insulated, stranded copper conductor FRLS cable with two continuous copper earth conductor of 6 sqmm in and including PVC casing caping complete all as directed by Engineer-in-Charge. (Note :- 6 runs of 6 Sqmm conductor and earth wire shall be measured as one unit length.)
M & L for Sub main wiring complete with two single core 6 sqmm ,1100volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 6 sqmm in and including PVC conduit for consealed complete all as directed by Engineer-in-Charge. (Note :- 3 runs of 6 Sqmm conductor and earth wire shall be measured as one unit length.)
M & L for Sub main wiring complete with four single core 6 sqmm and two core of 4 sq.mm earth wire,1100volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor in and including PVC conduit for concealed and making good of disturbed surfaces with existing complete all as specified and as directed. (Note :- 4 runs of 6 Sqmm conductor and 2 runs of 4 sqmm earth wire shall be measured as one unit length.)
M&L for cutting chases, pinning in making good to facing where required and poinitng in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good of disturbed surfaces, cutting not exc 10 cm girth all as specified and directed by engineer in charge. Note:- Making good of disturbed surfaces will be done by contractor without any extra cost to the Department
S&F MCB DB TPN 4 way double door with 200 amps rated busbar 415 V, recess mounted/wall mounted all as directed and specified by Engineer in charge.
S&F MCB DB SPN 8 way, double door, with 200 Amp rated busbar 240 V, recess mounted all as specified and directed by Engineer in charge.
S&F vertical 4 way TPN double door,recess mounted / wall mounted DB incl one number,MCCB as incomer 3 pole and neutral of 100A rated capacity & 16KA breaking capacity,pre-fitted at factory all as specified and directed.
S&F MCB DB SPN 4 way double door with 200 amp rated busbar, 240V recess mounted with common earth dolly all as directed and specified.
S&F MCB SP 6-32amps,10KA,'C' series complete all as specified and as directed.
S&F MCB SPN 40-63 amps,10KA, 240V,'C' series complete all as specified and as directed.
S&F MCB TPN 63 amps ,10KA,415 V,'C' series complete all as specified and as directed.
M&L for earthing complete with GI earth plate electrode 60cmx60cmx6.3mm thick buried directly in ground (earth pit not less than 2.25 mtr in deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level including connecting GI earth wire 4mm dia by GI nut, bolt, washers all as shown in electrical plate No. 3 of SSR Part I of 2009 including funnel for watering, PCC 1:3:6 type C-2 using 40mm graded stone aggregates as in pit / chamber, RCC 1:2:4 type B0 using 12.5mm graded stone aggregates and 6mm dia mild steel bars at 100mm c/c as in chamber cover, charcoal, salt etc complete including excavation and earth work in any strata, test point and testing on completion including filling up the earth pit with black cotton soil for best result and removal of excavated material from site all as specified and directed by Engineer-in-charge. (Note : GI earthwire and GI protection pipe upto 7.5 mtr length shall be included in this item.)
M & L For fixing earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe with 4 sqmm GI Wire complete all as specified and as directed.
Supplying and fixing LED tube light fitting complete with all fitting and fixing accessories, 1X20 Watt pre-wired with high efficiency electronic driver, glarefree, smooth light distribution complete all as specified and as directed.
Supply and fixing Integral LED Security Light Luminaire 30 W comprising of epoxy powder coated aluminium housing, enclosed with glass cover in frame suitable for 50/40 mm GI Pipe (including GI pipe) complete with accessories conforming to Cat Part No : HPLLEDSL3060S of HPL or of equivalent in Wipro / Phillips / Havells including taking down old fitting, complete all as directed.
Preventive maintenance of storage type electric water heater (Geyser) of capacity 25/50 ltrs comprising of the following tasks at different locations of any make: (a) Inspection of geyser after opening bottom cover plate. (b) Examine water tightness of storage tank. (c) Carry out operation of all stop cocks, pressure reducing valves, etc. to ensure free movement of the working parts. (d) Replace washers and glands of defective taps to ensure water tightness smooth functioning. (e) Inspect vent pipes and remove blockage obstruction if any. (f) Check and correct earth continuity of electrical items. (g) Check and correct temperature setting of thermostats and test its functioning. (h) Checking and adjustments of pressure reducing valves. (i) Checking of dead weight type high pressure release valve (PRV) by removing dead weight protection cleaning the seat and ensuring that the waste hole is not blocked / chocked. (j) Testing of Geysers after repairs/maintenance in all respect for proper functioning. (Note : Spares shall be measured and paid seperately)
Supply & fix thermostat ISI marked suitable for the following capacity Geysers 25 ltrs. to 50 ltrs capacity complete all as specified and as directed.
Supply & fix safety valve/dead weight valve ISI marked suitable for 25 and 50 ltrs. capacity Geysers complete all as specified and as directed.
Supply & fix heating element for 1KW /1.5 KW rating as required at site(any type) including rubber washers (ISI marked) complete all as specified and as directed.
Supply & fix storage inner tank made out of copper sheet suitable for following capacity geysers complete all as specified and as directed :- (a). 25 ltrs.
(b). 50 ltrs.
Supply & fix apparatus plate for Geyser of 25 to 50 ltrs. Capacity complete all as specified and as directed.
Supply & fix PVC connections pipe with brass hexagonal adapters both side suitable for 15mm dia pipe 45/60cm long for cold water as per requirement complete all as specified and as directed.
All as per Ser. Item No. 219.00 above but for hot water complete all as specified and as directed.
S&F in repairs 15 Amps plug top and connection complete all as specified and as directed.
Supply & fix non-return valve 15mm / 20mm dia of brass ISI marked complete all as specified and as directed.
S&F in repairs to Geysers inner water tank of 25 to 50 ltrs. capacity in gas welding / brazing for water tightness and testing complete all as specified and as directed.
Supply & fix indicators of Geysers 25 to 50 ltrs. Capacity(Red/Green/Yellow) complete all as specified and as directed.
Supply & fix gasket rubber ring for Heater plate of any size Geysers complete all as specified and as directed.
Supply & fix inspection cover for outer container of Geysers 25 to 50 ltrs complete all as specified and as directed.
Supply & fix outer container made out of 14 gauge CRCA sheet duly painted suitable for the following capacity geysers:- (a). 25 ltrs. capacity
(b). 50 ltrs. capacity
Taking down defective geysers for repair/ painting/ shifting complete all as specified and as directed. (Note :- Repairs will be measured and paid separately under respective Item of Sch)
S&F in repairs cable PVC insulated 3 core 2.5 Sqmm with stranded copper conductor 1100V grade from socket / switch to geyser complete all as specified and as directed.
S&F in repairs cable PVC insulated 3 core 4.0 Sqmm with stranded copper conductor 1100V grade complete all as specified and as directed.
S&F PVC rectangular block for mounting, switches, sockets, fan regulator etc with cover laminated sheet cover of size 100mmx100mm and 50mm deep complete all as specified and as directed. (Note :- Making good of disturbed surfaces will be done by contractor without any extra cost to the Department)
All as per Ser. Item No. 232.00 above but 175x100x50 mm deep complete all as specified and as directed.
All as per Ser. Item No. 232.00 above but 200x150x50 mm deep complete all as specified and as directed.
All as per Ser. Item No. 232.00 above but 250x200x50 mm deep complete all as specified and as directed.
All as per Ser. Item No. 232.00 above but 350x300x50 mm deep complete all as specified and as directed.
S&F Fan condenser 2.5Mfd, 230V AC,50 Hz complete all as specified and as directed.
Supply & fixing in repairs rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates of etc. confirming to Fe-410-W (Gde-E-250) Quality-A, complete all as specified and directed.
Sunny Enterprises
RELIABLE ENTERPRISES
visionenterprises
SARATH ENTERPRISES
DIAMOND ENTERPRISES
MONA ASSOCIATES
J D Contruction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .