GE(S) BTD TOKEN NO 32 OF 2023-24 MAINTENANCE REPAIR OF STEEL FURNITURE ARTICLES UNDER GE(S) BATHINDA AT BATHINDA MIL STN

Amount

Preparation of old painted iron and steel surface (externally & internally complete) of Almirah large steel/Almirah steel 1/2H 1/2shelf FD-1031/67(M)/FD/E6/MAP/18 by scraping & rubbing down with sand paper, removing dents & scratches if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron and steel surface (externally & internally complete) of Almirah medium steel FD-1032/243/67(M) by scraping & rubbing down with sand paper, removing dents & scratches if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron and steel surface (externally & internally complete) of Locker steel FD-1029/257 by scraping & rubbing down with sand paper, removing dents & scratches if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron and steel surface of Table 900x600x760 mm with drawer FD-1008 by scraping & rubbing down with sand paper, removing dents & scratches if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed. Note - Wooden portion of table 900x600x760 shall be lacquer polished with high gloss finish.

Preparation of old painted iron and steel surface (Externally & internally complete) of Table office Clk Steel FD-1004/381/307/84(M) by scraping & rubbing down with sand paper, removing dents & scratches if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed. Note - Wooden portion of table office clk steel shall be lacquer polished with high gloss finish. Note - Wooden portion of table Office Clk Steel shall be lacquer polished with high gloss finish.

Preparation of old painted iron and steel surface (Externally & internally complete) of Table Office offr Steel FD-1002/1003/84(M) by scraping & rubbing down with sand paper, removing dents & scratches if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed. Note - Wooden portion of table office offr steel shall be lacquer polished with high gloss finish. Note - Wooden portion of table Office Offr Steel shall be lacquer polished with high gloss finish.

Preparation of old painted iron and steel surface of Table bed side (MAP) FD/E6/MAP/15, FD/E6/MAP/15(R) by scraping & rubbing down with sand paper, removing dents & scratches if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed. Note - Wooden portion of table bed side (MAP) shall be lacquer polished with high gloss finish. Note - Wooden portion of table bed side (MAP) shall be lacquer polished with high gloss finish.

Preparation of old painted iron and steel surface of Bed Hard steel (MAP) FD/E6/MAP/8,FD/E6/MAP/8(R) by scraping & rubbing down with sand paper, removing dents & scratches if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron and steel surface of Table Computer FD/E6/MAP/03 by scraping & rubbing down with sand paper, removing dents & scratches if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed. Note - Wooden portion of table Computer shall be lacquer polished with high gloss finish.

M&L to repair Almirah steel large/Almirah steel 1/2H 1/2shelf by replacing the following unserviceable parts with approved ones.Rest all as per the drawings complete all as specified and directed. (DRG NO. FD-1031/ 67(M))/FD/E6/MAP/18)

MS lock 6 lever with duplicate key.

Chromium plated handle 150mm long.

Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.

Pane glass 3.5/ 4mm thick of almirah glazed large steel.

Note:- Pattern and shape of lock and handle will be determined as per actual requirement at site.

M&L to repair Almirah medium/small steel by replacing the following unserviceable parts with approved ones. Rest all as per the drawings complete all as specified and directed. (DRG NO. FD-1032/243/67M))

MS lock 6 lever with duplicate key.

Chromium plated handle 150mm long.

Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer

Pane glass 3.5/ 4mm thick of almirah small glazed steel.

Note:- Pattern and shape of lock and handle will be determined as per actual requirement at site.

M&L to repair Locker steel by replecing the following parts with approved ones.Rest all as per drawings complete all as specified and directed. (DRG NO. FD-257/1029)

Chromium plated hasp and staple 75mm long.

Chromium plated handle 100mm long.

Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer

MS hinge 75mm long.

M&L to repair Table 900mm x 600 mm with drawer by replacing the following parts with approved ones as mentioned below and as per the drawing complete all as specified and directed. (DRG NO. FD-1008 )

MS lock of suitable size with duplicate key.

PVC handle of approved quality suitable for drawer.

Making the drawer functional by removing dents from MS sheet align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete all as specified and directed.

Top (910mm x 610mm) made out of 18mm thick pre-laminated MDF board (exterior gde) one side classic walnut face and balancing white on other side duly teakwood beading 4x18/19mm all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings complete all as specified and directed.

S&F PVC/hard rubber toe of approved quality and suitable size.

M&L to repair Table 900mm x 600mm without drawer steel by replacing the top (910mm x 610mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of lacquer polish. Rest all as per the drawing complete all as specified and directed.

Preparation of old surface of Table 900mmx600mm without drawer steel by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) OG colour ccomplete all as specified and directed.

S&F PVC/hard rubber toe of approved quality and suitable size.

M&L to repair Table 900mm x 900mm steel by replacing the top (910mm x 910mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of lacquer polish. Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-1009 )

Preparation of old surface of Table 900mmx900mm steel by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) OG colour complete all as specified and directed.

S&F PVC/hard rubber toe of approved quality and suitable size.

M&L to repair Teapoy verandah by replacing the top (910mm x 460mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of lacquer polish. Rest all as per the drawings complete all as specified and directed. (DRG NO. FD-255 /208/ 35 )

Preparation of old surface of teapoy verandah by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) white colour complete. Rest all as specified and directed by Engr-in-charge. (DRG NO.FD-255 /208/ 35)

S&F PVC toe for teapoy verandah of approved quality and suitable size.

M&L to repair Teapoy verandah (MAP) by replacing the top (760mm x 460mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of lacquer polish. Rest all as per the drawing and directed by Engr-in-charge. (DRG NO.FD/E6/MAP/17 )

Preparation of old surface of teapoy verandah MAP by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) black colour complete all as specified and directed. (DRG NO. FD/E6/MAP/17)

S&F PVC/Hard rubber toe for teapoy verandah (MAP) of approved quality and suitable size.

Spot welding on various items of steel furniture FD/TP

M&L to repair Table clerk (steel) by replacing the following parts with approved ones.complete all as specified and directed. (DRG NO. FD-1004/381/307/84(M)).

MS lock of suitable size with duplicate key.

S&F PVC handle of approved quality suitable for drawer.

Making the drawer functional by removing dents from MS sheet align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete all as specified and directed.

Top (1220mm x 610mm) made out of 18mm thick pre-laminatedexterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners . Rest all as per the drawings complete all as specified and directed.

S&F PVC/Hard rubber toe of suitable size.

M&L to repair Table officer (steel) by replacing the following parts with approved ones.Rest all as per drawings complete all as specified and directed. (DRG NO. FD-1003/84(M)).

MS lock of suitable size with duplicate key.

S&F PVC handle of approved quality suitable for drawer.

Making the drawer functional by removing dents from MS sheet align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete all as specified and directed.

Top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings complete all as specified and directed.

S&F PVC/Hard rubber toe of suitable size.

M&L to repair Table bed side (MAP) by replacing the following parts with prelaminated MDF board(exterior gde)/plywood BWR gde. Rest all as per drawings complete all as specified and directed. (DRG NO. FD/E6/MAP/15, FD/E6/MAP/15(R))

Top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side duly provided with teakwood beading of suitable size complete all as specified and directed.

Side made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Naina teak/ Classic walnut face and balancing white on other side complete all as specified and directed.

Back made out of plywood 6mm thick BWR Gde.

Upper drawer complete excluding handle.

Lower drawer complete excluding handle.

CP handle 100mm long of approved quality.

S&F PVC/Hard rubber toe of suitable size.

M&L to repair Bed hard (MAP) by replacing the following unserviceable parts with approved ones.Rest all as per drawings complete all as specified and directed. (DRG NO. FD/E6/MAP/08,FD/E6/MAP/08(R )

Plywood 12mm(9 ply) thick BWR Gde size 1990mm x 855mm.

Nut and bolt of suitable size complete.

Pre-laminated MDFboard(exterior gde) of Head rest complete.

Pre-laminated MDFboard(exterior gde) of foot rest complete.

S & F PVC/Hard rubber toe of suitable size.

M&L to repair Table computer by replcing the following parts with prelaminated exterior gde MDF board OSL (Designation PLMDF-12).Rest all as per the drawings complete all as specified and directed. (DRG NO.FD/E6/MAP/03,TP)

Top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side duly provided with teak wood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners complete all as specified and directed.

Side made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side naina teak/Classic walnut face and balancing white on other side complete all as specified and directed.

All as per item no 22.01 but Key board tray complete excluding telescopic channel

All as per item no 22.01 but pull out tray complete excluding telescopic channel.

All as per item no 22.01 but drawer complete excluding knob.

All as per item no 22.01 but middle shelf including vertical portion complete.

All as per item no 22.01 but bottom shelf complete.

Telescopic channel of suitable size and approved quality.

Note:- Sample and shade of materials will be determined as per actual requirement at site.

M&L to repair Table dining OR Steel by replacing the top (size 1900x685mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of lacquer polish. Rest all as per the drawing complete all as specified and directed. (DRG NO. FD-165(M) )

Preparation of old surface of Table dining OR Steel by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) black colour complete all as specified and directed.

S&F PVC/Hard rubber toe of approved quality and suitable size.

Removing of unserviceable plywood from Charpoy plywood top (MAP) (FD/MAP-II/01) and providing 12mm thick (9 ply) plywood BWR Gde with suitable size (1990mm x 910mm) of nut and bolt including welding of loose joints if any, and painting by brush or by spray machine with one coat of Ist quality synthetic enamel paint of approved shade complete all as specified and directed.

Removing of unserviceable plywood from Charpoy folding (FD-388(R) and providing 8/9mm thick plywood BWR Gde with suitable size of nut and bolt including welding of loose jointsif any, and painting by brush or by spray machine with one coat of Ist quality synthetic enamel paint of approved shade complete all as specified and directed.

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

M/S SUNIL TRADERS

B K CONTRACTORS

H.K.TRADERS