WBHD AE ESD III eNIQ 60, 25-26

Amount

Supply and Delivery of 1.1 KV grade following sizes Al. armoured PVC/XLPE cable (Gloster/Havells/polycab) as mentioned below as per choise of EIC. 2 Core 6 sqmm

2 Core 10 sqmm

Supply & Fixing of 240V, 70 W LED out door type light fittings complete with all accessories and equipped with IP66 Protection (Make:- Philips, Cat no.- BRP 502 LED 105 CW R5C PSU S1 or equivalent model of Havells/Bajaj/CG/other equivalent make as approved by E.I.C) on existing MS Pipe/Mini Pole as per direction of E.I.C

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish . From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below. 2 Core 6 sqmm

2 Core 10 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl.supplying and fixing solderless socket (Dowels make), tapes,anticorrosive paste & jointing materials. 2 Core 6 sqmm

2 Core 10 sqmm

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR'(Precision make) incl. necy. fittings as required. (i) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting. a) 200 x 150 x 100mm

Providing CC (6:3:1) muffing 450x450x600 mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if any incl. fixing only loop box if necessary. Without Loop Box

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required to GS. 32 mm dia Pipe ISI-Medium

Painting of Steel Tubular Pole of following lengths and 2 nos. of aluminium coats of paint over 1 coat of RO priming with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint a) Upto 9 mtr. long pole . (i) 1st coat of aluminium paint over 1 coat of RO priming

Add. G.S.T.@ 18% (on Total from item no 1 to 15) to be calculated by bidder

Add. LWC.@ 1% to be calculated (on total from item no 1 to 15 + GST@18%) by bidder

M/S. GOPAL ELECTRICALS (BID ID -6866378)

Swarnendu Sarkar (BID ID -6854929)