Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.5 LAccepted-AOC 2 GA 29 HOUSING BOARD MANU MARG ALWAR 301001 | ALWAR | RAJASTHAN | 301001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹41.9 L+₹10.1 L (31.7%)Rejected-Finance | L2 | Rejected-Finance Being L2 |
Tender Value
Refer Docs
EMD Value
₹98,000
Closing Date
3 Feb 2022, 6:00 pmClosed
GE Alwar
GE Alwar
REPAIR TO CHAIRS, TABLES AND CONNECTED ITEMS AT GE ALWAR
2022_MES_500043_1
8056/E8
Open Tender
Support/Maintenance Service
Item Rate
210 days
GE Alwar
As per NIT
3 documents required · 3 mandatory
₹500
Yes
GE Alwar
₹98,000
Yes
8 Mar 2022
7 Jan 2022
5 Feb 2022
7 Jan 2022
3 Feb 2022
21 Jan 2022
7 Jan 2022 - 20 Jan 2022
Amount
M&L for removing carefully following existing broken/ unserviceable components / members of chair dinning and supply and fixing new components/ members duly finished complete all as shown on drawing and directed :- Drg No : FD-228 & FD-279
Cane :- Cane shall be 2mm wide and 0.04mm thick, half round and 4 mm wide flat for border around seat as per existing size and shape as per Drg.
Rear leg as per existing size and shape duly furnished and polished made out of 1st class hardwood (Teak)
Font leg as per existing size and shape duly furnished and polished made out of 1st class hardwood (Teak)
Front/ Back top rail as per existing size and shape as per Drg.
Left/Right top rail as per existing size and shape as per Drg.
Upper/ Lower Stiffner for back support as per existing size and shape duly furnished and polished.
Centre Stiffener 16mmx25mmx25mm as per existing size and shape as per Drg.
Side Stiffner - 14mmx25mmx25mm as per existing size and shape as per Drg.
PVC Ring/ Rubber shoe as per Drg.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
M&L for removing carefully following existing broken/ unserviceable components/members of Chair writing and supply and fixing new components/ members duly finished complete all as shown on drawing and directed :- Drg No FD-202 & FD-280.
Cane :- Cane shall be 2mm wide and 0.04mm thick, half round and 4 mm wide flat for border around seat as per existing size and shape as per Drg.
Rear leg as per existing size and shape duly furnished and polished made out of 1st class hardwood (Teak)
Front leg as per existing size and shape duly furnished and polished made out of 1st class hardwood (Teak)
Side Stiffener for bottom legs as per size and shape duly furnished and polished.
Centre Stiffener for bottom legs as per size and shape duly furnished and polished.
Arm of size 495mm x 60mm x 25mm made out of 1st class hardwood (Teak).
PVC Ring/ Rubber shoe as per Drg.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
M&L for removing carefully following existing broken/unserviceable components/members of Chair Easy and supply and fixing new components /members duly finished complete all as shown on drawing and directed :- Drg No FD-201 & FD-229.
Cane (Seat and Back):- Cane shall be 2mm wide and 0.04mm thick, half round and 4 mm wide flat for border around seat as per existing size and shape as per Drg.
Front/Rear leg of size 55mm x 25mm x 535mm long made out of 1st class hardwood (Teak)
Left/Right arm rest of size 610mm x 55mm x 25mm made out of 1st class hardwood (Teak).
Front rail of size 520mm x 50mm x 25mm made out of 1st class hardwood (Teak) including drilling of holes for canning as per drawings.
Rear rail of size 500mm x 70mm x 25mm made out of 1st class hardwood (Teak) including drilling of holes for canning as per drawings.
Side rail of size 530mm x 70mm x 40mm made out of 1st class hardwood (Teak) including drilling of holes for canning as per drawings.
Back frame of size 480mm x 55mm x 19mm made out of 1st class hardwood (Teak) including drilling of holes for canning as per drawings.
PVC Ring/ Rubber shoe as per Drg.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
M&L for removing carefully following existing broken/ unserviceable components/ members of Chair dinning cushioned and supply and fixing new components /members duly finished complete all as shown on drawing and directed :- Drg No FD/E6/MAP/10
Rear leg of size 30mm x 40mm x 900mm long made out of 1st class hardwood (Teak).
Front leg of size 30mm x 40mm x 325mm long made out of 1st class hardwood (Teak).
Front rail of size 450mm x 65mm x 25mm made out of 1st class hardwood (Teak).
Rear rail of size 450mm x 65mm x 25mm made out of 1st class hardwood (Teak).
Side rail of size 545mm x 70mm x 25mm made out of 1st class hardwood (Teak).
Vertical strips 15mm x 30mm and 460mm long made out of 1st class hard wood (teak).
Seat shall be 75mm thick 32 density foam with fabric of approved sample on seat of 12mm thick phenol bonded plywood.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
M&L for removing carefully following existing unserviceable components / members of Sofa set and supply and fixing new components/ members complete all as shown on drawing and directed :- Drg No FD-281 & FD-373
Front leg made out of 1st class hardwood (Teak) of size 70mm x 35mm & height as shown on drawing.
Rear leg made out of 1st class hardwood (Teak) of size 70mm x 35mm & height as shown on drawing.
Arm Made out of 1st class hardwood (Teak) of size 70mm x 35mm and length as shown on drawing.
Batten made out of 1st class hardwood (Teak) of size 20mm x 50mm & length as shown on drawing.
Back frame made out of 1st class hardwood (Teak) of size 70mm x 35mm & length as shown on drawing.
M&L for replacement of unserviceable seat/ back cushion with new 100mm thick with 40 density of size 560mm x 530mm x 100mm thick (Make - Sleepwell/ Curlon) for sofa set all as specified and directed.
Removing carefully existing cover of seat/back cushion of size 560mm x 530mm x 100mm thick complete and material & labour for new cover of white long cloth not less than Rs 80/-per mtr and tapestry cloth of rate not less than Rs. 250/- per metre complete all as specified and directed.
PVC Ring/ Rubber shoe as per Drg.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
M&L for removing carefully following existing broken/ unserviceable components/ members of Table 900mm x 600mm x 760mm with/without drawer wooden and supply and fixing new components/ members duly finished complete all as shown on drawing and directed:- Drg No FD-223 & FD-283
Side rail as per existing size made out of 1st class hardwood (Teak)
Leg of size 60mm x 60mm at top and 40mm x 40mm at bottom x 740mm long made out of 1st class hardwood (Teak).
Stiffener of size 40mm x 25mm x 760mm made out of 1st class hardwood (Teak).
Stiffener of size 40mm x 25mm x 460mm made out of 1st class hardwood (Teak).
Top of size 900mm x 600mm made out of 18mm thick prelaminated MDF board one side decorative of approved shade including 4mm thick teakwood edging alround.
Drawer of size 300mm x 460mm x 110mm with knob of Mild steel chromium plated of size 40mm.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
M&L for removing carefully following existing broken/ unserviceable components /members of Table Dinning 4 person 1200mm x 900mm and supply and fixing new components/members duly finished complete all as shown on drawing and directed:- Drg No : FD/MAP/11/03
Top of size 1200mm x 900mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround.
Leg of size 75mm dia at top and 40mm dia at bottom x 740mm long made out of 1st class hardwood (Teak).
Side rail of size 50mm x 25mm x 460mm made out of 1st class hardwood (Teak)
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
M&L for removing carefully following existing broken /unserviceable components/members of Table Dinning 6/8 persons 1500mm x 900mm x 760mm and 1800mm x 900mm x 760mm) and supply and fixing new components/ members duly finished complete all as shown on drawing and directed. Drg No FD-273 :-
Side rail as per existing size made out of 1st class hardwood (Teak)
Leg of size 75mm x 40mm x 740mm long made out of 1st class hardwood (Teak).
Top of size 1500mm x 900mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround.
Top of size 1800mm x 900mm made out of 18mm thick prelaminated MDF board one side decorative of approved shade including 4mm thick teakwood edging alround.
PVC Shoes /Buffers.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
Removing carefully the following existing broken / unserviceable fixtures / wooden members of Table Dressing Ladies and supply and fixing new components/members duly finished complete all as shown on drawing and directed :- Drg No FD-251
Top of size 900mm x 380mm made out of 18mm thick decorative MDF board one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround.
Drawer of size 140mm x 350mm with knob of Mild steel chromium plated of size 40mm.
Knob of mild steel chromium plated as per sample .
Leg Made out of 1st class hardwood (Teak) of size 45mm x 45mm x 155mm.
Mirror of size 366mm x 1220mm, 5 to 6mm thick.
Back of mirror made of plywood 6mm thick commercial both sides as per existing size and shape.
Sliding glass of size 300mm x 290mm, 5 to 6mm thick, including aluminum channel.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
Removing carefully the following existing broken / unserviceable fixtures / wooden members of Teapoy (600mm x 450mm x 540mm) and supply and fixing new components/members duly finished complete all as shown on drawing and directed. Drg No FD-232
Leg Made out of 1st class hardwood (Teak) of size 45mm x 45mm at top cut to shape and 25mm x 25mm at bottom, 515mm height.
Front top rail made out of 1st class hardwood (Teak) of size 40mm x 19mm x 450mm
Side top rail made out of 1st class hardwood (Teak) of size 40mm x 19mm x 300mm
Stiffener made out of 1st class hardwood (Teak) of size 25mm x 19mm x 450mm
Stiffener made out of 1st class hardwood (Teak) of size 25mm x 19mm x 300mm
Top of size 600mm x 450mm made out of 18mm thick decorative MDF board one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround.
PVC Shoes /Buffers as per sample.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
Removing carefully the following existing broken / unserviceable fixtures / wooden members of Peg Table (450mm x 300mm x 380mm) and supply and fixing new components/members duly finished complete all as shown on drawing and directed. Drg No FD-236 :-
Leg Made out of 1st class hardwood (Teak) of size 45mm x 45mm at top cut to shape and 25mm x 25mm at bottom, 362mm height.
Front top rail made out of 1st class hardwood (Teak) of size 40mm x 19mm x 300mm
Side top rail made out of 1st class hardwood (Teak) of size 40mm x 19mm x 200mm
Top of size 450mm x 300mm made out of 18mm thick decorative MDF board one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround.
PVC Shoes /Buffers as per sample.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
Removing carefully the following existing broken / unserviceable fixtures / wooden members of Table bed side and supply and fixing new components /members duly finished complete all as shown on drawing and directed. Drg No FD-248 :-
Side of size 435mm x 300mm made out of 18mm thick decorative MDF board of approved shade (exterior grade)
Shelf of size 380mm x 300mm made out of 18mm thick decorative MDF boarde of approved shade (exterior grade)
Bottom of size 380mm x 300mm made out of 18mm thick decorative MDF board of approved shade (exterior grade)
Back of size 380mm x 435mm made out of 6mm thick plywood one side decorative face and other side commercial face.
Top of size 380mm x 300mm made out of 18mm thick decorative MDF board of approved shade (exterior grade) including 4mm thick teakwood edging alround.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
Removing carefully the following existing broken / unserviceable fixtures / wooden members of Table bed side (MAP) and supply and fixing new components/members duly finished complete all as shown on drawing and directed:- Drg No FD/E6/MAP/15
Top of size 450mm x 450mm made out of 18mm thick decorative MDF board of approved shade (exterior grade) including 4mm thick teakwood edging alround.
Left/Right Side of size 450mm x 432mm made out of 18mm thick decorative MDF board of approved shade (exterior grade)
Bottom of size 450mm x 450mm made out of 18mm thick decorative MDF board of approved shade (exterior grade)
Back of size 500mm x 450mm made out of 6mm thick plywood and upper side/back decorative MDF board and 414mm x 90 mm, 18mm thick decorative MDF board of approved shade (exterior grade)
Drawer of size 414mm x 100mm made out of 18mm thick decorative MDF boardwith 6mm thick ply wood bottom and handle as per approved by Engr-in-charge.
Knob of mild steel chromium plated as per sample approved.
PVC Shoes as per sample.
Removing carefully the following existing broken / unserviceable fixtures / wooden members of Table writing (1145mm x 600mm x 760mm) and supply and fixing new components/members duly finished complete all as shown on drawing and directed:- Drg No FD-275
Leg made out of 1st class hardwood (Teak) of size 55mm x 35mm of height as shown on drawing.
Front top rail made out of 1st class hardwood (Teak) of size 50mm x 25mm length as shown on drawing.
Top of size 1145mm x 600mm made out of 18mm thick decorative MDF board of approved shade (exterior grade) including 4mm thick teakwood edging alround.
Knob of mild steel chromium plated as per sample approved.
PVC Shoes/buffers.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
Table 900mm x 900mm x 760mm steel frame without drawer FD 1009 similar pattern and removing the exiting unserviceable part with the following new part :- Drg No FD-1009
Top of size 900mm x 900mm made out of 18mm thick Prelaminated MDF board one side decorative of approved shade including 4mm thick teakwood edging alround as per existing size and shape as per drg.
Leg made out of 25mm square mild steel tube with wall thickness 1.6mm, 740mm long duly painted with two coats of synthetic enamel paint over a coat of red oxide primer as per existing size and shape as per drg.
PVC Ring /Rubber shoe as per drg.
Preparation/cleaning of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with two coat of synthetic enamal green as per drgs
Table 900mm x 600mm x 760mm steel frame with drawer/without drawer FD-1008/FD-1007 similar pattern and removing the exiting unserviceable part with the following new part :-
Top size 900mm x 600mm size made out of 18mm thick prelaminated MDF board one side decorative of approved shape incl 4mm thick teak wood edging as per existing size and shape as per drg.
Leg made out of 25mm square mild steel tube with wall thickness 1.6mm, 740mm long duly painted with two coats of synthetic enamel paint over a coat of red oxide primer as per existing size and shape as per drg.
Drawers with 20 gauge thic PBI sheet complete with lock and handle and as per existing size shape duly paint synthetic enamal as per drgs.
Preparation/cleaning of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with two coat of synthetic enamal OG Paint as per drgs
Chair Computer/Chair Revolving FD-FD/E6/MAP/01 similar pattern and removing the existing unserviceable part with the following new parts :-
12mm thick hot pressed plywood upholstered with polyester fabric of approved colour and moulded polyurethane foam (50mm thick density 50-55 Kg/Cum hardness 20 + 2 kg on Hampden machine) with PVC lipping alround for seat and back (Seat size shall be 510x470x60mm and back size as shown on drawing) all as directed and shown on drawing.
Lumber support for extra comfort anti shock back mechanism to prevent back rest from tilting the user.
Arm rest made of black integral skin polyurethane with 75-85 shore 'A' hardness and reinforced with MS insert scratch and weather resistant.
Castor wheel as per existing size and shape specified.
Pedestal assembly injection moulded in black 30% glass filled nylon 10.5mm dia forged bright zinc plated MS castor pin is of press fitted into each prong for holding the castor.
Chair writing FD/E6/MAP/12 similar pattern and removing the existing unserviceable part with the following new part as per drg :-
12mm thick hot pressed plywood upholstered with polyester fabric of approved colour and moulded polyurethane foam (50mm thick density 50-55 Kg/Cum hardness 20 + 2 kg on Hampden machine) with PVC lipping all round for seat and back.
Lumber support for extra comfort anti shock back mechanism to prevent back rest from tilting the user.
Arm rest made of black integral skin polyurethane with 75-85 shore 'A' hardness and reinforced with MS insert scratch and weather resistant having slope towards front.
Cantilever type powder coated MS tubular frame made out of 25mm x 10mm section.
Preparation/cleaning of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with one coat of synthetic enamal black paint as per drgs
Table Computer FD/E6/MAP/03 similar pattern and removing the existing unserviceable part with the following new part as per drg :-
Top 18mm thick prelaminated particle MDF board as per existing size and shape duly funished and polished.
Drawer 18mm thick prelaminated particle MDF board as per existing size and shape duly funished and polished.
Sliding/ telescopic channel of table computer with new sliding channel of approved quality (replace in pair), complete all as specified, shown on drawing and directed.
Handle as per existing size and shape as per drg.
PVC Ring /Rubber shoe as per drg.
Preparation/cleaning of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with two coat of synthetic enamal black paint as per drgs.
Chair Verandah FD/MAP-II/15(R) similar pattern and removing the existing unserviceable parts with the following new parts as per drg :-
12mm thick seat and back made of PVC moulded along with 4mm x 10mm ribs provided at around the outer edge & around the grooves of size as per drg.
Hard PVC shoes as per drg.
Preparation/cleaning of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with two coat of synthetic enamal white paint as per drgs
Chair Verandah FD-256 similar pattern and removing the existing unserviceable parts with the following new parts as per drg.
M&L for removing of existing old used and unserviceable cane from Chair Verandah and re-tapping (reweaving) both side with new white colour plastic cane 4mm best quality white colour and shall be woven as per godrej pattern (seat & back both), stitched with approved plastic cane at starting and terminating ends as per trade practice all as shown on drawings.
M&L for removing of existing old used and unserviceable Nylon newar from Chair Verandah and re-tapping (reweaving both side with new white colour Nylon newar 25mm wide of superior quality closely woven to both sides of the frame (seat & back both), stitched with approved nylon thread at starting and terminating ends as per trade practice all as shown on drawings.
M&L for removing unserviceable rubber shoe of chair Verandah and providing new hard rubber shoe in black colour as per sample kept in Furniture Yard Alwar.
M&L for preparation/cleaning old painted steel surface of chair Verandah and painting with a coat of white synthetic enameled paint over a coat of red oxide primer after preparation of surfaces all as specified as per drg.
Chair CB steel FD -75(M) with arms and without arms similar pattern and removing the existing unserviceable parts with following new parts.
Taking out old unserviceable seat and supply and fixing new wooden seat 1st class hard wood (shisham) made to shape for Chair CB Steel with out arms duly caned with 2 to 2.5mm wide half round as per godrej pattern with and including fixing with machine screw i.e bolt 75mm size with nuts and washers through holes in the wooden frame including painting with two coats of synthetic enamel paint (Black colour) over one coat of pink primer on wooden surface complete all as specified.
Taking out old unserviceable back and supply and fixing new wooden back 1st class hard wood (shisham) made to shape for Chair CB steel with arms duly caned with 2 to 2.5mm wide half round as per godrej pattern with and including fixing with machine screw i.e. bolt 75mm size with nuts and washers through holes in the wooden frame including painting with two coats of synthetic enamel paint (Black colour) over one coat of pink primer on wooden surface complete all as specified.
All as per serial item No 22.01 here-in-before but seat of Chair Steel with out arms Drg No. FD-75 (M)
All as per serial item No 22.02 here-in-before but back of Chair Steel with arms (Drg No. FD-75 (M)
Removing old unserviceable flat iron and supply and fixing new flat iron 25mm x 3mm, 450mm long fixed under the wooden seat of the Chair CB steel with arms or without arms by welding (so that the wooden seat can rest on it) with and including painting the flat iron with two coats of synthetic enamel paint of approved colour over a coat of primer to match with existing colour complete all as specified and as directed. Note: Two Nos flat iron strip shall be provided to seat of each chair and cost of two strip shall be considered in one job.
Removing old unserviceable flat iron and supply and fixing new flat iron 25mm x 3mm, 450mm long fixed under the wooden back of the Chair CB steel with arms or without arms by welding with and including painting the flat iron with two coats of synthetic enamel paint of approved colour over a coat of primer to match with existing colour complete all as specified and as directed. Note: Two Nos flat iron strip shall be provided to back of each chair and cost of two strip shall be considered in one job.
PVC Ring /Rubber shoe as per drg.
Chair School steel with hand board FD/E6/MAP/05 similar pattern and removing the existing unserviceable parts with the following new parts as per drg :-
PVC seat and back in one piece of size as per drg with 60mm lean distance fixed with screws.
Top openable of size as per drg made out of 18mm thick prelaminated MDF board both side decorative of approval shade (Exterior grade) with PVC edging alround, hinged on Right Hand Side (RHS) screwed to & including 25mm dia mild steel tube with wall thicness 1.6mm inserted in 20mm dia mild steel rod welded to frame, steel surfaces powder coated. Drg No FD/E6/MAP/05.
PVC Ring /Rubber shoe as per drg.
Table Dining ORs FD-165 (M) similar pattern and removing the existing unserviceable part with the following new parts :-
Top of size 1900mm x 685mm made out of 18mm thick Prelaminated MDF board one side decorative of approved shade including 4mm thick teakwood edging alround complete all as shown on drawing and directed.
PVC Ring /Rubber shoe as per drg.
Preparation/cleaning of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with two coat of synthetic enamal OG Paint as per drgs
M/S CHANDER SHEKHAR
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .