Maintenance of switch house building at 132 kv sub station Shri Hargobindpur under P and M Division Dasuya

Amount

Maintenance

Dismantling cement conglomerate floors (25mm to 50mm) thick with concrete base

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled

Scraping of Cement Plaster

Cement concrete 1:2:4 gola10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.

Conglomerate floor 50 mm thick cement cencrete topping 1:2:4

Providing and laying vitrified floor tiles 600x600mm size premium quality,manufactured using Double ChargeTechnology, with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 fine sand) for new flooring laid with cement based high polymer modified quick set tile adhesive (water based) of hing pigments etc., complete (Design is homogenous throughout the tile body).

Providing and fixing 1st quality ceramic glazed wall tiles manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4

P/FAnti-skid floor tiles 10mm thick in flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with whitecement slurry in joints including corners angles and beading

12.5mm thick cement plaster 1:4

Finishing walls with acrylic smooth exterior paint of required shade with two coats applied @ 1.67 litre/10sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats)

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish

Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)

Providing and fixing of 5mm thick plane glass

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sectionsJindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge For fixed portion and chaukhats

For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete

Providing and laying, jointing fixing and testing G.I. Pipe lines B-Class including cost of specials such as tees, bends, sockets, elbows etc. testing, cutting, threading Inside building complete15mm i/d

Providing and laying, jointing fixing and testing G.I. Pipe lines B-Class including cost of specials such as tees, bends, sockets, elbows etc. testing, cutting, threading Inside building complete20mmi/d

Providing, fixing and jointing G.I union complete on all respect15mm i/d G.I union

Providing, fixing and jointing G.I union complete on all respect20mm i/d G.I union

Providing, fixing and jointing gun-metal peet valves (Heavy Pattern) with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.20mm i/d G.I union

Providing & fixing in position best Indian make (to be approval of the Engineer-incharge) vitreous Chinware white flat back or angular lipped front urinal size 440 x 315 x 265 mm C.P. brass flexible tube connection 450 mm long.

Providing and fixing in position Chinaware European type water closet P trap or S trap (to the approval of the Engineer-in-charge) suite-consisting of 10 ltr. PVC flushing cistern supported on angle iron bracket, short bend 32 mm dia

Providing and fixing in position S.S grating with Frame of approved brand

Providing and fixing in position best Indian make white ordinary lavatory suites consisting of C.P. brass waste 32mm dia, pair of angle iron bracket with one C.P. brass tap complete.Size 550 mm x 400 mm

Providing and fixing in position towel rails of approved make including cutting and making good the walls etc CP brass Rails size 15mm dia 600mm long

Providing & Fixing in position best indian make bevelled edge 5mm thick mirror mounted on 4mm thick Cardboard sheet ground fixed in position by means of 4 nos. chromium plated brass screws and washers .Size 600mmx450mm

Providing & Fixing in postion 15 mm i/d bib cock of cp braas without flange (as approved by the Engineer-in-charge).

Providing & Fixing in postion stop cock / Angle valve cp brass(as approved by the Engineer-incharge).C.P.brass 15mm stop cock Male and female end

Providing, Stringing out U.P.V.C. Pipes casting asper IS:15328-2003 class-SN-8 along the trenches and laying the same in Trenches to correct alignment and gradients, cutting and jointing including cost of specials complete as per specifications.110mm o/d pipe

Providing and fixing jet spray with 2'-6" long PVC pipe.With C.P. Brass nut

Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x330mm

Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand)

Wiring fan point without fan box in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts.

Wiring light point in PVC insulated copper conductor singl core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade.

Wiring 3 pin 6 Amp. wall socket (Shuttered) point in PVCinsulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade complete wit\ FRLS cable (ISI marked) overall 1 sq. mm, 1100volts grade.

Wiring 3 pin 16/20 amp. power plug control (shuttered) and switch.

PVC insulated copper conductor single core FRLS cable (ISI marked) overall 2.5 sq.mm, 1100volts grade

PVC insulated copper conductor single core FRLS cable (ISI marked) overall 4 sq.mm, 1100volts grade

Supply and Erection of Heavy gauge PVC conduit pipe 25mm dia. (ISI marked 2mm thick) Flushed

Supplying and Erection of Miniature circuit breaker single pole 0.5 to 4amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply

Replacement of worn out tiles with new one

Providing and fixing Polythene sheet 250 MICRON

Extra Carriage for coarse sand and coarse aggregate and stone metal

Extra carriage for bricks and tiles

Extra carriage for fine sand

Extra carriage for cement

Difference of material rates in crushed bajri 13.2mm

Difference of material rates in crushed bajri 11.2mm

Difference of material rates in coarse sand

Difference of material rates in Tiles

THE QADIAN MOHALLA AKALGARH COOP LABOUR AND CONSTRUCTION SOCIETY LIMITED

Baldev Singh Randhawa