Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.2 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹41.7 L+₹3.0 L (7.82%)Rejected-Finance 195 MAHESH NAGAR AMBALA CANTT 133001 | AMBALA | HARYANA | 133001 | L2 | Rejected-Finance Being Other than L1 | |
| 3 | L3₹42.5 L+₹3.8 L (9.92%)Rejected-Finance 29 MODEL TOWN BEHIND GURUDWARA PATHANKOT | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹43.5 L+₹4.9 L (12.5%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 |
| Sl No | Description | Qty | Unit | Raman Electric Trading Co L2 | pee kay construction L4 | kailu construction co L3 | Mahajan Builder L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling & Taking down existing panel & Supply, installation, fabrication, testing and commissioning of new LT Panel board, (CPRI approved) Factory made cubical type, Outdoor type, floor mounted, factory made out of 50mm x 50mmx5mm angle iron frame and 3.15mm inner CRCA steel sheet side covers with front and back hinged doors with proper locking arrangement, rubber gasket on front and back to make it dust and vermin proof, powder coated including suitable rated aluminium bus bar sleeved with heat shrink sleeve colour coated for 3 Phase, 4 wire electric supply system and wiring with suitable size of 800 amps (03 Nos 800 Amps for Phase and 01 No 400 Amps for neutral) rated aluminium bus bar complete powder coated paint with and providing necessary foundation/plateform of the feeder pillar and provision for incoming and outgoing cable, cable gland, replacement of lugs for existing cables as per site requirement and proper finshing as per existing surface complete all as specified and directed by Engr- in- Charge. Note : (i) The quoted rate shall be of all inclusive.(ii) Drawing for LT feeder piller box shall be got approved by GE before fabrication.(iii) Platform for the feeder pillar board with PCC 1:2:4 15 Cm thick in foundation, Brick (Sub Class B) work in CM 1:6 ,rendering 1:6 on exposed surfaces and 100 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in padding on top and grouting legs of panel . The platform shall be of 40 cm below ground level and 60Cm height above ground level . Rate for Platform shall be included in the quoted rate.
(a) Incoming
(i) MCCB 04 Pole 36 kA, 500 Amp,415 Volts, fixed thermal & magnetic release (Qty 01 No).
(b) Out goings
(i) MCCB 04 Pole 16 KA, 100 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 08 Nos)
(ii) Aluminium bus bar suitable size 3 phase, 4 wire 800 Amp,415 V, duly insulated - set of 4
(iii) Digital Volt meter 0-500V with slector switch.
(iv) Digital Amp meter 0-500 amp with CT and selector switch.
(v) Indicating lamp (RYB)LED Type - set of 3 (Note: All MCCB rating Ics/Icu = 100% .) | 2 | Each Job | 2,20,000 ₹4,40,000 | 1,75,000 ₹3,50,000 | 1,55,000 ₹3,10,000 | 1,25,000 ₹2,50,000 Lowest |
| 2.00 | Dismantling & Taking down existing panel & Supply, installation, fabrication, testing and commissioning of new LT Panel board, (CPRI approved) Factory made cubical type, Outdoor type, floor mounted, factory made out of 50mm x 50mmx5mm angle iron frame and 3.15mm inner CRCA steel sheet side covers with front and back hinged doors with proper locking arrangement, rubber gasket on front and back to make it dust and vermin proof, powder coated including suitable rated aluminium bus bar sleeved with heat shrink sleeve colour coated for 3 Phase, 4 wire electric supply system and wiring with suitable size of 600 amps (03 Nos 600 Amps for Phase and 01 No 300 Amps for neutral) rated aluminium bus bar complete powder coated paint with and providing necessary foundation/plateform of the feeder pillar and provision for incoming and outgoing cable, cable gland, replacement of lugs for existing cables as per site requirement and proper finshing as per existing surface complete all as specified and directed by Engr- in- Charge. Note : (i) The quoted rate shall be of all inclusive.(ii) Drawing for LT feeder piller box shall be got approved by GE before fabrication.(iii) Platform for the feeder pillar board with PCC 1:2:4 15 Cm thick in foundation, Brick (Sub Class B) work in CM 1:6 ,rendering 1:6 on exposed surfaces and 100 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in padding on top and grouting legs of panel . The platform shall be of 40 cm below ground level and 60Cm height above ground level . Rate for Platform shall be included in the quoted rate.
(a) Incoming
(i) MCCB 04 Pole 36 kA, 400 Amp,415 Volts, fixed thermal & magnetic release (Qty 01 No).
(b) Out goings
(i) MCCB 04 Pole 25 KA, 100 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 02 Nos)
(ii) MCCB 04 Pole 25 KA, 250 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 02 Nos)
(iii) Aluminium bus bar suitable size 3 phase, 4 wire 600 Amp,415 V, duly insulated - set of 4
(iv) Digital Volt meter 0-500V with slector switch.
(v) Digital Amp meter 0-400 amp with CT and selector switch.
(vi) Indicating lamp (RYB)LED Type - set of 3 (Note: All MCCB rating Ics/Icu = 100% .) | 1 | Each Job | 1,87,000 ₹1,87,000 | 1,65,000 ₹1,65,000 | 1,25,000 ₹1,25,000 Lowest | 1,25,000 ₹1,25,000 Lowest |
| 3.00 | Dismantling & Taking down existing panel & Supply, installation, fabrication, testing and commissioning of new LT Panel board, (CPRI approved) Factory made cubical type, Outdoor type, floor mounted, factory made out of 50mm x 50mmx5mm angle iron frame and 3.15mm inner CRCA steel sheet side covers with front and back hinged doors with proper locking arrangement, rubber gasket on front and back to make it dust and vermin proof, powder coated including suitable rated aluminium bus bar sleeved with heat shrink sleeve colour coated for 3 Phase, 4 wire electric supply system and wiring with suitable size of 500 amps (03 Nos 500 Amps for Phase and 01 No 250 Amps for neutral) rated aluminium bus bar complete powder coated paint with and providing necessary foundation/plateform of the feeder pillar and provision for incoming and outgoing cable, cable gland, replacement of lugs for existing cables as per site requirement and proper finshing as per existing surface complete all as specified and directed by Engr- in- Charge. Note : (i) The quoted rate shall be of all inclusive.(ii) Drawing for LT feeder piller box shall be got approved by GE before fabrication.(iii) Platform for the feeder pillar board with PCC 1:2:4 15 Cm thick in foundation, Brick (Sub Class B) work in CM 1:6 ,rendering 1:6 on exposed surfaces and 100 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in padding on top and grouting legs of panel . The platform shall be of 40 cm below ground level and 60Cm height above ground level . Rate for Platform shall be included in the quoted rate.
(a) Incoming
(i) MCCB 04 Pole 36 kA, 315/320 Amp,415 Volts, fixed thermal & magnetic release (Qty 01 No).
(b) Outgoing-
(i) MCCB 04 Pole 25 KA, 125 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 02 Nos)
(ii) MCCB 04 Pole 25 KA, 200 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 02 Nos)
(iii) Aluminium bus bar suitable size 3 phase, 4 wire 500 Amp,415 V, duly insulated - set of 4
(iv) Digital Volt meter 0-500V with slector switch.
(v) Digital Amp meter 0-400 amp with CT and selector switch.
(vi) Indicating lamp (RYB)LED Type - set of 3 (Note: All MCCB rating Ics/Icu = 100%) | 2 | Each Job | 1,81,000 ₹3,62,000 | 1,65,000 ₹3,30,000 | 1,22,000 ₹2,44,000 Lowest | 1,25,000 ₹2,50,000 |
| 4.00 | M&L for in replacement of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured heavy duty electric power cable 1100 volts with stranded aluminium conductor of size 185 Sqmm 3.5 core including rate of Lugs/Thimble as per cable size laid in trenches or under road complete all as specified and as directed. (Note: Excavation, cable protection work will be measure & paid separately) | 500 | RM | 1,110 ₹5,55,000 Lowest | 1,150 ₹5,75,000 | 1,180 ₹5,90,000 | 1,200 ₹6,00,000 |
| 5.00 | All as per serial item No 4.00 here-in- before but of size 120 Sqmm 3.5 core complete all as specified and as directed | 360 | RM | 770 ₹2,77,200 | 750 ₹2,70,000 Lowest | 790 ₹2,84,400 | 1,100 ₹3,96,000 |
| 6.00 | All as per serial item No 4.00 here-in- before but of size 70 Sqmm 3.5 core complete all as specified and as directed. | 500 | RM | 450 ₹2,25,000 Lowest | 600 ₹3,00,000 | 500 ₹2,50,000 | 700 ₹3,50,000 |
| 7.00 | All as per serial item No 4.00 here-in- before but of size 25 Sqmm 4 core complete all as specified and as directed. | 380 | RM | 265 ₹1,00,700 | 225 ₹85,500 Lowest | 240 ₹91,200 | 350 ₹1,33,000 |
| 8.00 | Supply, laying & fixing double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints, Sockets, Elbows, bends and End caps as size of DWC pipe is 50mm O/D and 38 mm Inner dia complete all as specified and directed. | 300 | RM | 80 ₹24,000 | 50 ₹15,000 Lowest | 60 ₹18,000 | 110 ₹33,000 |
| 9.00 | All as per srl item No 8.00 here-in-before but of size 76mm outer dia and 63mm inner dia complete all as specified and as directed. | 750 | RM | 132 ₹99,000 | 80 ₹60,000 | 70 ₹52,500 Lowest | 132 ₹99,000 |
| 10.00 | All as per srl item No 8.00 here-in-before but of size 90mm outer dia and 76mm inner dia complete all as specified and as directed. | 380 | RM | 160 ₹60,800 | 100 ₹38,000 | 80 ₹30,400 Lowest | 150 ₹57,000 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
11 May 2026, 6:00 pmClosed
GE NAMS
GE NAMS Amritsar
REPAIR/ REPLACEMENT OF LT PANEL APFC PANEL AND ALLIED WORKS OF ELECTRICAL INSTALLATIONS AT NAMS UNDER GE NAMS
2026_MES_761072_1
GE NAMS-14/2026-27
Open Tender
Civil Works
Item Rate
270 days
GE NAMS
CLASS D CATEGORY b (i)
8 documents required · 8 mandatory
₹500
GE NAMS
₹90,000
10 Jul 2026
20 Apr 2026
14 May 2026
20 Apr 2026
11 May 2026
4 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling & Taking down existing panel & Supply, installation, fabrication, testing and commissioning of new LT Panel board, (CPRI approved) Factory made cubical type, Outdoor type, floor mounted, factory made out of 50mm x 50mmx5mm angle iron frame and 3.15mm inner CRCA steel sheet side covers with front and back hinged doors with proper locking arrangement, rubber gasket on front and back to make it dust and vermin proof, powder coated including suitable rated aluminium bus bar sleeved with heat shrink sleeve colour coated for 3 Phase, 4 wire electric supply system and wiring with suitable size of 800 amps (03 Nos 800 Amps for Phase and 01 No 400 Amps for neutral) rated aluminium bus bar complete powder coated paint with and providing necessary foundation/plateform of the feeder pillar and provision for incoming and outgoing cable, cable gland, replacement of lugs for existing cables as per site requirement and proper finshing as per existing surface complete all as specified and directed by Engr- in- Charge. Note : (i) The quoted rate shall be of all inclusive.(ii) Drawing for LT feeder piller box shall be got approved by GE before fabrication.(iii) Platform for the feeder pillar board with PCC 1:2:4 15 Cm thick in foundation, Brick (Sub Class B) work in CM 1:6 ,rendering 1:6 on exposed surfaces and 100 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in padding on top and grouting legs of panel . The platform shall be of 40 cm below ground level and 60Cm height above ground level . Rate for Platform shall be included in the quoted rate.
(a) Incoming
(i) MCCB 04 Pole 36 kA, 500 Amp,415 Volts, fixed thermal & magnetic release (Qty 01 No).
(b) Out goings
(i) MCCB 04 Pole 16 KA, 100 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 08 Nos)
(ii) Aluminium bus bar suitable size 3 phase, 4 wire 800 Amp,415 V, duly insulated - set of 4
(iii) Digital Volt meter 0-500V with slector switch.
(iv) Digital Amp meter 0-500 amp with CT and selector switch.
(v) Indicating lamp (RYB)LED Type - set of 3 (Note: All MCCB rating Ics/Icu = 100% .) | 2 | Each Job | - | - |
| 2 | Dismantling & Taking down existing panel & Supply, installation, fabrication, testing and commissioning of new LT Panel board, (CPRI approved) Factory made cubical type, Outdoor type, floor mounted, factory made out of 50mm x 50mmx5mm angle iron frame and 3.15mm inner CRCA steel sheet side covers with front and back hinged doors with proper locking arrangement, rubber gasket on front and back to make it dust and vermin proof, powder coated including suitable rated aluminium bus bar sleeved with heat shrink sleeve colour coated for 3 Phase, 4 wire electric supply system and wiring with suitable size of 600 amps (03 Nos 600 Amps for Phase and 01 No 300 Amps for neutral) rated aluminium bus bar complete powder coated paint with and providing necessary foundation/plateform of the feeder pillar and provision for incoming and outgoing cable, cable gland, replacement of lugs for existing cables as per site requirement and proper finshing as per existing surface complete all as specified and directed by Engr- in- Charge. Note : (i) The quoted rate shall be of all inclusive.(ii) Drawing for LT feeder piller box shall be got approved by GE before fabrication.(iii) Platform for the feeder pillar board with PCC 1:2:4 15 Cm thick in foundation, Brick (Sub Class B) work in CM 1:6 ,rendering 1:6 on exposed surfaces and 100 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in padding on top and grouting legs of panel . The platform shall be of 40 cm below ground level and 60Cm height above ground level . Rate for Platform shall be included in the quoted rate.
(a) Incoming
(i) MCCB 04 Pole 36 kA, 400 Amp,415 Volts, fixed thermal & magnetic release (Qty 01 No).
(b) Out goings
(i) MCCB 04 Pole 25 KA, 100 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 02 Nos)
(ii) MCCB 04 Pole 25 KA, 250 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 02 Nos)
(iii) Aluminium bus bar suitable size 3 phase, 4 wire 600 Amp,415 V, duly insulated - set of 4
(iv) Digital Volt meter 0-500V with slector switch.
(v) Digital Amp meter 0-400 amp with CT and selector switch.
(vi) Indicating lamp (RYB)LED Type - set of 3 (Note: All MCCB rating Ics/Icu = 100% .) | 1 | Each Job | - | - |
| 3 | Dismantling & Taking down existing panel & Supply, installation, fabrication, testing and commissioning of new LT Panel board, (CPRI approved) Factory made cubical type, Outdoor type, floor mounted, factory made out of 50mm x 50mmx5mm angle iron frame and 3.15mm inner CRCA steel sheet side covers with front and back hinged doors with proper locking arrangement, rubber gasket on front and back to make it dust and vermin proof, powder coated including suitable rated aluminium bus bar sleeved with heat shrink sleeve colour coated for 3 Phase, 4 wire electric supply system and wiring with suitable size of 500 amps (03 Nos 500 Amps for Phase and 01 No 250 Amps for neutral) rated aluminium bus bar complete powder coated paint with and providing necessary foundation/plateform of the feeder pillar and provision for incoming and outgoing cable, cable gland, replacement of lugs for existing cables as per site requirement and proper finshing as per existing surface complete all as specified and directed by Engr- in- Charge. Note : (i) The quoted rate shall be of all inclusive.(ii) Drawing for LT feeder piller box shall be got approved by GE before fabrication.(iii) Platform for the feeder pillar board with PCC 1:2:4 15 Cm thick in foundation, Brick (Sub Class B) work in CM 1:6 ,rendering 1:6 on exposed surfaces and 100 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in padding on top and grouting legs of panel . The platform shall be of 40 cm below ground level and 60Cm height above ground level . Rate for Platform shall be included in the quoted rate.
(a) Incoming
(i) MCCB 04 Pole 36 kA, 315/320 Amp,415 Volts, fixed thermal & magnetic release (Qty 01 No).
(b) Outgoing-
(i) MCCB 04 Pole 25 KA, 125 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 02 Nos)
(ii) MCCB 04 Pole 25 KA, 200 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 02 Nos)
(iii) Aluminium bus bar suitable size 3 phase, 4 wire 500 Amp,415 V, duly insulated - set of 4
(iv) Digital Volt meter 0-500V with slector switch.
(v) Digital Amp meter 0-400 amp with CT and selector switch.
(vi) Indicating lamp (RYB)LED Type - set of 3 (Note: All MCCB rating Ics/Icu = 100%) | 2 | Each Job | - | - |
| 4 | M&L for in replacement of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured heavy duty electric power cable 1100 volts with stranded aluminium conductor of size 185 Sqmm 3.5 core including rate of Lugs/Thimble as per cable size laid in trenches or under road complete all as specified and as directed. (Note: Excavation, cable protection work will be measure & paid separately) | 500 | RM | - | - |
| 5 | All as per serial item No 4.00 here-in- before but of size 120 Sqmm 3.5 core complete all as specified and as directed | 360 | RM | - | - |
| 6 | All as per serial item No 4.00 here-in- before but of size 70 Sqmm 3.5 core complete all as specified and as directed. | 500 | RM | - | - |
| 7 | All as per serial item No 4.00 here-in- before but of size 25 Sqmm 4 core complete all as specified and as directed. | 380 | RM | - | - |
| 8 | Supply, laying & fixing double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints, Sockets, Elbows, bends and End caps as size of DWC pipe is 50mm O/D and 38 mm Inner dia complete all as specified and directed. | 300 | RM | - | - |
| 9 | All as per srl item No 8.00 here-in-before but of size 76mm outer dia and 63mm inner dia complete all as specified and as directed. | 750 | RM | - | - |
| 10 | All as per srl item No 8.00 here-in-before but of size 90mm outer dia and 76mm inner dia complete all as specified and as directed. | 380 | RM | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.28 MB
BOQ_852506.xls
BOQ • 8.15 MB
14T.pdf
Tender Documents • 1.23 MB
14A.pdf
PDF • 0.12 MB
14A.pdf
PDF • 0.12 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .