Development of Infrastruture by way of construction ladies/Gents Toilet units and allied repair of Sub-Divisional office building of I and FC Sub-division Kishtwar at Hidyal with in Divisional office complex Hydraulic Division Kishtwar.

Amount

Demolshing stone Rubble Masonary manually/ by machanical means including stacking of serviceable material and disposal of unservice able material within 50 m lead as per direction of Engineer-in-charge. In cement mortar

Earth work in excavation by manual means over areas (exceeding 30cm and upto 1.5m in depth, 1.5 m in width as well as 10 sq meter on plan including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be leveled and neatly dressed(All kinds of soils)

Random Rubble Masonry with Hard Stone in Foundaton and Plinth Including Leveling up with cement concreate 1:6:12 up to plinth level and curing complete with Cement Mortar 1:6 Mix Nallah stone (Labour Rate)

Providing and laying Damp-proof course 40 mm Thick with cement concrete 1:2:4 (1:cement, 2:coarse, 4:graded stone aggregate 20 mm noinal size) and curing complete.

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

20mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. 20mm nominal outer dia pipes.

External work including trenching, refilling etc. 25mm nominal outer dia pipes.

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 15 mm dia. nominal bore

Providing and fixing white vitreous china pedestal type water closet (European type ) with seat and lid, 10 litre low level white vitreous china flushing cistern and CP flush bend with fittings and CI brackets, 40mm flush bend, over flow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting and fittings and burkets, cutting and making good thw walls anf floors wherever required: W.C pan with ISI marked white solid plastics seat and lid.

Providing and fixing white vitreous china plat back or wall corner type liped front urinal basin of 430X260X350mm and 340X410X265mm sizerespectively with automatic flushing cistern with standard flush pipe and CP brass spreanders with brass unions and GI clamps complete including painting of fittings and burkets, cutting and making good thw walls anf floors wherever required:One urinal basin with 05 litre white P.V.C automatic flushing cistern.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:white Vitreous china wash basan size 630X450mm with a pair of 15mm C.P brass pillar taps.

Providing and fixing white vitreous china pedertal for wash basin compeletely recessed at the back for the recepition of pipes and fittings.

Providing and fixing white vitreous china water closet squatting pan (Indian type)Orissa pattern W.C pan of size 580X440mm

Extra for using coloured W.C pan instread of white W.C pan Orissa patern W.C pan of size 580X440mm

Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer-in-charge.

Providing and fixing 100 mm sand cost iron grating for gully trap.

Providing and fixing in position 25 mm Dia meter mosquito proof coupling of approved municipal design.

Providing and fixing 600X450 mm beveled edge miller of superiour glass of app quality complete in 06 mm thick hard bond glass fixed to wooden chest with C.P brass screws and washers complete

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plags, etc.complete

Providing and fixing toilet paper holder with Vitreous china

Providing and fixing soil, waste and vent pipes: Centrifugally cast (spun) iron S and S pipe as per IS-3989

Providing and fixing bend of required degree with access door, insertion each cach 38 rubber washer 3 mm thick, bolts and nuts complete: Sand cast iron S and S as per IS:3989

Providing and fixing double equal plain junction of required degree.Sand cast iron S and S as per IS:3989

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to ooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in- charge.

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.20 mm diameter.

Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With Galvanized M.S. Wire gauge with wire of dia 0.63 mm With 2nd class teak wood beading 62x19 mm

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed buhinges bright finished of required size with necessary screws as per direction Engineer-in-charge : First class kail wood

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Wiring for the following light points &exhaust fan points with 1.5Sqmm PVC insulated copper wires of approved make in concealed or surface mounted PVC conduit including providing and fixing of 6 Amp single pole switch of approved quality in modular grid plate and GI box and Earthing of fixtures and the outlet box with 1.5sqmm PVC insulated copper wire (make havells, anchor, GM, or equivalent approved by the site engineer) a) One light controlled by 6 Amp Switch

Wiring for 240 volts single phase and neutral 16 amps switched socket outlet with 4 sqmm PVC insulated copper wi in concealed or surfaced mounted PVC conduit including providing and fixing of 16amp 3 pin switched socket of approved make with modular grid plate and Earthing the third pin of socket outlet with 1.5 sqmm PVC insulated copper wire complete as required (make havells, anchor, GM, or equivalent approved by the site engineer)

Wiring for ceiling fan /wall fan point same as above in item No1 but controlled by electronic stepped regulator and 6amp control switch. (make havells, anchor, GM, or equivalent approved by the site engineer)

Wiring for 230v ac, 5pin 6 amps socket outlets for light duty power with 2x1.5sqmm PVC insulate copper wire of approve make with modular grid plates and Earthing the third pin of socket outlet with 1.5 sqmm PVC insulated copper wire complete as required (make havells, anchor, GM, or equivalent approved by the site Engineer)

Supplying and fixing of following size dia PVC conduit including cost of junction boxes, bends. elbows. sockets, tees etc laying in slab cutting chases and making good or surface mounted including all fixing hardware as required. 25mm dia

Supplying installation testing and commissioning of pre wired 12 watt led light surface mounted/recessed complete with connection as required (make havells, anchor, GM, halonex or equivalent approved by the site engineer).

Supplying installation testing and commissioning of ceiling fan complete with connection as required (make havells, halonex Bajaj, or equivalent approved by the site engineer)

Supplying and fixing of following size mcb's complete with connection as required (make Schneider, anchor, legrand, ABB, or equivalent approved by the site engineer)

Supplying and fixing 4 way TPN Distribution box complete job as required

Supplying and Laying 7/16 64 gauge copper wire fir service line complete with connection as required.

Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive.

Carriage of sand from nearest source to road site of work for an avg. distance 35 kms by M.T

Carriage of sand from road side to site of work for an avg. distance 100 mtrs by H.L

Carriage of Bajrii Agg. from nearest source to road site of work for an avg. distance 06 kms by M.T

Carriage of Bajrii Agg. from road side to site of work for an avg. distance 100 mtrs by H.L

Carriage of Cement from Road Side to site of work for an .avg Distance 02 km by M.T

Carriage of Bricks from Road Side to site of work for an .avg Distance 245 km by M.T

Carriage of Bricks from Road Side to site of work for an .avg Distance 100 Mtrs by H.L.

SUBHASH CHANDER

gulshan ahmed mingnoo

AIYAZ AHMAD MIR

SAIRA BEGUM

RAJU KUMAR