SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF FURNITURE FOR ADMINISTRATIVE BLOCK IN CEL COMPLEX, SAHIBABAD, U.P complete in all respect

Amount

Supplying and placing in position of Center Table as per photograph. Table glass size 995mmL x 545mmD x 415mmH, glass shall be 8-10mm thick toughened, edge beveled and in rectangular shaped. Under structure shall be made with solid wood contemporary chic design finish. Two number of glass supported on high quality SS chrome plated rings. Complete as per approved make of image and specification under the guidance of Engineer in charge.(Customized)

Supplying and placing in position of Corner Table as per photograph. Table glass size 600mmL x 600mmD x 445mmH, glass shall be 8-10mm thick toughened, edge beveled and in rectangular shaped. Under structure shall be made with solid wood contemporary chic design finish. Two number of glass supported on high quality SS chrome plated rings. Complete as per approved make of image and specification under the guidance of Engineer in charge.(Customized)

Meeting Room(Customized): Supplying, and placing in position of 10 seator Conference Table as per photograph. Confrence table Size ;- L-3000mm x D-1200mm x H-750mm.Conference table comprises of table top which shall be made out of 36mm thick particle board at sides . Table top shall be supported with pre laminated legs and modesty panels shall be made out of 18mm thick particle board. Provision of wire raceway under the table top for wires flow.Provision of junction box for wire management through floor and wire raceway under the table top.Complete as per approved make of image and specification under the guidance of Engineer in charge.

Main Chair: Supplying and placing in position of 360 degrees revolving high back chair as per photograph. The Jordon chair of Size :- (W)640mm X (D)480mm X (H)1140mm - 1240mm. The breathable mesh back chair with cushioned fabric seat shall be ergonomically design with adjustable lumbar back support . The chair shall be visioned with adjustable armrest with PU padding and any position locking arrangements.. The seat cushion to be upholstered on 10-12mm thick water proof plywood and cut foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be provided with multi position locking and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black Five star chrome base with hooded nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) Dimensions tolerance / variations shall be within +/- 1 cm.Complete as per approved make of image and specification under the guidance of Engineer in charge.Complete as per approved make of image and specification under the guidance of Engineer in charge.

Visitor Chair: Supplying and placing in position of 360 degrees revolving medium back chair as per photograph. The Jordon chair of Size :- (W)610mm X (D)470mm X (H)940mm - 1040mm. The breathable mesh back chair with cushioned fabric seat shall be ergonomically design with adjustable lumbar back support . The chair shall be visioned with adjustable armrest with PU padding and any position locking arrangements.. The seat cushion to be upholstered on 1mm thick water proof plywood and cut foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be provided with multi position locking and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black Five star chrome base with hooded nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) Dimensions tolerance / variations shall be within +/- 1 cm.Complete as per approved make of image and specification under the guidance of Engineer in charge.

HOD Room , GM Office & Executive Director-(Customized): Supplying and placing in position of Table for manager as per photograph. Modular table size (L)2300mm X (D)900mm X (H)750mm. Table top shall be made of 25mm thick pre-laminated particle board of approved shade. Table Top working edges shall be provided with matching machine pressed 2mm thick PVC edging using with special hot melt glue at hot temperature. Table top supported on side panles and modesty panel. Side and Modesty panel shall be made out of 18mm thick pre-laminated particle board laminated on both sides as approved shade. The working or nonworking edges shall be provided with matching machine pressed 2mm thick PVC edging using with special hot melt glue at hot temperature. The table shall be provisioned with Side unit of size 1200mm (L) X 450mm (W) X 750mm (H) mm. Side unit top shall be made of 25mm thick prelaminated particle board matching with table top. Side unit & drawers backing shall be 9mm thick pre-laminated. Side unit having a storage with the combination of three drawers, one openable shutters with one shelf inside and one open shelf without shutters. Table includes one mobile Pedestal size 400mm (W) x 450mm (D) x 600mm (H) and having three equal drawers rolling on telescopic Chanel with single locking management. Pedestal sides, front shall be made out of 18mm thick particle board. Drawer bottom and pedestal backing should be 9mm thick particle board. Complete as per approved make of image and specification under the guidance of Engineer in charge.

HOD Room , GM Office & Executive Director Main Chair: Supplying and placing in position of 360 degrees revolving high back chair as per photograph. The Craze chair of Size :-(W)590mm X (D)505mm X (H)1180mm - 1280mm. The chair shall be ergonomically design contour lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered with leatheritte and cut foam. The leatherette upholstery in the chair has the look and feel of top grain leather. The chrome plated loop armrest with padded upholstery is provided for extra comfort. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) Dimensions tolerance / variations shall be within +/- 1 cm. .Complete as per manufacturer's specification and as per direction of Engineer -in –Charge.

HOD Room , GM Office & Executive DIrector Visitor Chair: Supplying and placing in position of 360 degrees revolving medium back chair as per photograph. The Craze chair of Size :-(W)590mm X (D)505mm X (H)1005mm - 1115mm. The chair shall be ergonomically design contour lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered with leatheritte and cut foam. The leatherette upholstery in the chair has the look and feel of top grain leather. The chrome plated loop armrest with padded upholstery is provided for extra comfort. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) Dimensions tolerance / variations shall be within +/- 1 cm. Complete as per manufacturer's specification and as per direction of Engineer -in –Charge.

HOD Room , GM Office & Executive DIrector Visitor Chair: Supplying and placing in position of the Hopper centre table of size :- (L)1130mm X (W)630mm X (H)410mm Inlaid onto a solid wood frame that slopes inward. The turned wooden legs are sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a focal point and some support. Complete as per specification mentioned above under the guidance of Engineer in charge.(Customized)

2nd HOD Room , PRO Room & PA to GM Room-(Customized): Supplying, and placing in position of table of size :- L-1500mm x D-600mm x H-750mm as per photograph. The main desk shall be made out of 25mm thick pre laminated particle board and contained the thickness of table top shall be 40mm center to center and from all the sides of table top, pre laminated particle board . Side panel shall be made out of 18mm thick pre laminated particle board and front modesty 18mm thick pre laminated particle board. Interchangable Side unit of size :- L-900mm x D-450mm x H-750mm shall be having a provision of a fixed pedestal of three drawers .Side unit top shall be made out of 25mm pre laminated particle board. The under structure shall be made out of 18mm thick pre laminated particle board. Table shall have one fixed pedestal unit attached table top and side panel. Pedestal sides, front and bottom shall be made out of 18mm thick pre laminated particle board. Drawer bottom and backing of the pedestal should be 9mm thick pre laminated particle board. The back unit top shall be made out of 18mm thick pre laminated particle board finished with PVC edgebanding. The under structure shall be made out of 18mm thick pre laminated particle board. The storage back shall be 9mm thick particle board . Provision of flip top box with snake pole for wire management.

2nd HOD Room , PRO Room & PA to GM Room Back Storage(Customized): Supplying, and placing in position of storage as per photograph. Storage Size :- L-1500mm x D-450mm x H-750mm. The complete storage unit shall be made up of 25mm thick prelaminated particle board finished with PVC edges . All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. The storage shall be provisioned with 2 nos. of shelves and 3 nos. compartments.The storage shall have openable shutters with handles and locking arrangements.Complete as per image and specification under the guidance of Engineer-in-charge

Main Chair: Supplying and placing in position of 360 degrees revolving high back chair as per photograph. The Oxford chair of Size :-(W)620mm X (D)490mm X (H)1140mm - 1240mm. The chair shall be ergonomically design contour lumbar back design made of 10-12mm thick BWP plywood upholstered with leatheritte and cut foam. The chair shall have fixed polypropelene arm rest.. The chair shall be provided with push back mechanism with locking system and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm . Five star chrome base with nylon castors . The seat and back are made up of 10- 12 mm thick hot pressed BWR plywood (IS Grade - 303) upholstered with poly urethane foam. The chair seat has foam of density 30-35 (+/-2kg /m3) and the backrest has a foam of 28 (+/-2kg /m3) . Dimensions tolerance / variations shall be within +/- 1 cm. Complete as per image and specification under the guidance of Engineer-in-charge

Visitor Chair: Supplying and placing in position of 360 degrees revolving medium back chair as per photograph. The Oxford chair of Size :-(W)620mm X (D)500mm X (H)890mm - 990mm. The chair shall be ergonomically design contour lumbar back design made of 10-12mm thick BWP plywood upholstered with leatheritte and cut foam. The chair shall have fixed polypropelene arm rest.. The chair shall be provided with push back mechanism with locking system and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm . Five star chrome base with nylon castors . The seat and back are made up of 10- 12 mm thick hot pressed BWR plywood (IS Grade - 303) upholstered with poly urethane foam. The chair seat has foam of density 30-35 (+/-2kg /m3) and the backrest has a foam of 28 (+/-2kg /m3) . Dimensions tolerance / variations shall be within +/- 1 cm. . Complete as per image, and specification under the guidance of Engineer in charge.

Senior Cabin-(Customized): Supplying and placing in position of Tabletop for worktable shall be made up of 25mm thick pre laminated Particle board of approved shade. The worktop shall be supported with 25mm prelaminated boards legs with Horizontal Connector and modesty panels. All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of one PVC keyboard tray and Metal CPU trolley with lockable castors for each seating. The Table shall include side storage. The storage unit top shall be made from 25 mm thick pre-laminated particle board and rest of the sides as well as shelves and shutter & 3 Drawer to be made up of 18 mm thick pre-laminated particle board while back to be made of 8 mm thick pre-laminated particle board. The 3 drawer Pedestal Unit of 400mm length with a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with provision of handles & central Locking arrangement. The storage to have openable shutters with one fixed shelf inside and open storage with a shelf. All edges to be provided with 2 mm thick PVC lipping . Each unit to have openable shutters with locking provisionComplete as per approved make of image and specification under the guidance of Engineer in charge. Cubicle with Table Size :- L- 1500mm x D- 600mm x H- 750mm ; Side Unit Size :- L- 1200mm x D-450mm x H-750mm (it shall be customised)

Main Chair: Supplying and placing in position of 360 degrees revolving high back chair as per photograph. The Jordon chair of Size :- (W)640mm X (D)480mm X (H)1140mm - 1240mm. The breathable mesh back chair with cushioned fabric seat shall be ergonomically design with adjustable lumbar back support . The chair shall be visioned with adjustable armrest with PU padding and any position locking arrangements.. The seat cushion to be upholstered on 10-12mm thick water proof plywood and cut foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be provided with multi position locking and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black Five star chrome base with hooded nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) Dimensions tolerance / variations shall be within +/- 1 cm.Complete as per approved make of image and specification under the guidance of Engineer in charge.

Visitor Chair: Supplying and placing in position of 360 degrees revolving medium back chair as per photograph. The Jordon chair of Size :- (W)610mm X (D)470mm X (H)940mm - 1040mm. The breathable mesh back chair with cushioned fabric seat shall be ergonomically design with adjustable lumbar back support . The chair shall be visioned with adjustable armrest with PU padding and any position locking arrangements.. The seat cushion to be upholstered on 1mm thick water proof plywood and cut foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be provided with multi position locking and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black Five star chrome base with hooded nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) Dimensions tolerance / variations shall be within +/- 1 cm.Complete as per approved make of image and specification under the guidance of Engineer in charge.

Linear Workstation & Server Room-Modular: Supplying and placing in position of sliding tile base modular Workstation of Size:- L-1200mm x D-600mm x H-1200mm as per image with . Free standing partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.1-1.2 mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims shall be powder coated with 50 microns. Aluminum trims are elegantly fixed with special fixtures in the partition. The frame work shall be fitted with 9mm thick pre laminated Particle tiles of approved shade. Partition shall have provision for pin up board with fabric/ white marker/ laminated of approved shade.Partition framework shall have adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another above / below the table top. The complete partitioning work shall be carried out as per the approved drawing. Tabletop for workstation made up of 25mm thick pre laminated Particle board of approved shade. The worktop shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s panels should be made from 18mm thick pre laminated Particle board of approved shade. All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of one PVC keyboard tray and Metal CPU trolley with lockable castors for each seating.Provision of Mobile Pedestal.

Workstation Area chair: Supplying and placing in position of 360 degrees revolving low back chair as per photograph. The chair of Size :- (W)625mm X (D)450mm X (H) 920mm. The breathable mesh back chair with cushioned fabric seat shall be ergonomically design with curved design . The chair shall be provisioned with fixed armrest and nylon base. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be provided with push back mechansm and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black Five star nylon base with hooded nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) Dimensions tolerance / variations shall be within +/- 1 cm. Complete as per approved make of image and specification under the guidance of Engineer in charge.

Low Ht Storage (Customized): Supplying, and placing in position of storage as per photograph. The complete storage unit shall be made up of 18mm thick prelaminated particle board finished with PVC edges . All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. The storage shall be provisioned with 2 nos. of shelves and 3 nos. compartments.The storage shall have openable shutters with handles and locking arrangements.Complete as per image and specification under the guidance of Engineer-in-charge. Size :- L-750mm x D-600mm x H-1200mm

Low Ht Storage (Customized): Supplying, and placing in position of storage as per photograph. The complete storage unit shall be made up of 18mm thick prelaminated particle board finished with PVC edges . All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. The storage shall be provisioned with 2 nos. of shelves and 3 nos. compartments.The storage shall have openable shutters with handles and locking arrangements.Complete as per image and specification under the guidance of Engineer-in-charge. Size :- L-1200mm x D-400mm x H-1200mm

Low Ht Storage (Customized): Supplying, and placing in position of storage as per photograph. The complete storage unit shall be made up of 18mm thick prelaminated particle board finished with PVC edges . All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. The storage shall be provisioned with 2 nos. of shelves and 3 nos. compartments.The storage shall have openable shutters with handles and locking arrangements.Complete as per image and specification under the guidance of Engineer-in-charge. Size :- L-1050mm x D-600mm x H-1200mm

Low Ht Storage (Customized): Supplying, and placing in position of storage as per photograph. The complete storage unit shall be made up of 18mm thick prelaminated particle board finished with PVC edges . All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. The storage shall be provisioned with 2 nos. of shelves and 3 nos. compartments.The storage shall have openable shutters with handles and locking arrangements.Complete as per image and specification under the guidance of Engineer-in-charge. Size :- L-1900mm x D-400mm x H-1200mm

Low Ht Storage(Customized): Supplying, and placing in position of storage as per photograph. The complete storage unit shall be made up of 18mm thick prelaminated particle board finished with PVC edges . All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. The storage shall be provisioned with 2 nos. of shelves and 3 nos. compartments.The storage shall have openable shutters with handles and locking arrangements.Complete as per image and specification under the guidance of Engineer-in-charge. Size :- L-900mm x D-400mm x H-1200mm

Low Ht Storage (Customized): Supplying, and placing in position of storage as per photograph. The complete storage unit shall be made up of 18mm thick prelaminated particle board finished with PVC edges . All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. The storage shall be provisioned with 2 nos. of shelves and 3 nos. compartments.The storage shall have openable shutters with handles and locking arrangements.Complete as per image and specification under the guidance of Engineer-in-charge. Size :- L-1800mm x D-400mm x H-1200mm

Low Ht Storage(Customized): Supplying, and placing in position of storage as per photograph. The complete storage unit shall be made up of 18mm thick prelaminated particle board finished with PVC edges . All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. The storage shall be provisioned with 2 nos. of shelves and 3 nos. compartments.The storage shall have openable shutters with handles and locking arrangements.Complete as per image and specification under the guidance of Engineer-in-charge. Size :- L-750mm x D-400mm x H-1200mm

Cash Counter(Customized): Supplying and placing in position of Customised study table of size:- 1200mm(L) x 600mm(D) x 750mm(H) as per photograph. The Modular table top shall be made up of 25mm thick pre-laminated particle board and understructure shall be made of 18mm thick prelaminated particle board gable ends and modesty panels. The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of Fixed Pedestal (size:- L-400mm x D-450mm x H-725mm) with a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with provision of handles & central Locking arrangement. Complete as per image and specification under the guidance of Engineer-in-charge

Main Chair: Supplying and placing in position of 360 degrees revolving medium back chair as per photograph. The Jordon chair of Size :- (W)610mm X (D)470mm X (H)940mm - 1040mm. The breathable mesh back chair with cushioned fabric seat shall be ergonomically design with adjustable lumbar back support . The chair shall be visioned with adjustable armrest with PU padding and any position locking arrangements.. The seat cushion to be upholstered on 1mm thick water proof plywood and cut foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with Polyurethane foam and mesh fabric (M/s Harit Silk Mills) over it. The chair shall be provided with multi position locking and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black Five star chrome base with hooded nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) Dimensions tolerance / variations shall be within +/- 1 cm.Complete as per approved make of image and specification under the guidance of Engineer in charge.

Conference Table(Customized): Supplying, and placing in position of Conference Table as per photograph. Conference table shall be made with the combination of straight tables and corner tables which shall be made out of 36mm thick MDF board at sides with veneer and melamine matt finish. Table top shall be supported with combination of 18 mm thick Side panels and modesty panels shall be made out of 18mm thick MDF with veneer over it.. All exposed edges shall be provided with machine pressed veneer edge banding. Provision of . flip top box for wire management and raceway under the table top for wires flow.Provision of wooden panel for wire management through floor to wire raceway under the table top. Complete as per approved make of image and specification under the guidance of Engineer in charge.

Main Chair: Supplying and placing in position of 360 degrees revolving high back chair as per photograph. The Jordon chair of Size :- (W)640mm X (D)480mm X (H)1140mm - 1240mm. The breathable mesh back chair with cushioned fabric seat shall be ergonomically design with adjustable lumbar back support . The chair shall be visioned with adjustable armrest with PU padding and any position locking arrangements.. The seat cushion to be upholstered on 10-12mm thick water proof plywood and cut foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with Polyurethane foam and mesh fabric (M/s Harit Silk Mills) over it. The chair shall be provided with multi position locking and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black Five star chrome base with hooded nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) Dimensions tolerance / variations shall be within +/- 1 cm.Complete as per approved make of image and specification under the guidance of Engineer in charge.

Visitor Chair: Supplying and placing in position of 360 degrees revolving medium back chair as per photograph. The Jordon chair of Size :- (W)610mm X (D)470mm X (H)940mm - 1040mm. The breathable mesh back chair with cushioned fabric seat shall be ergonomically design with adjustable lumbar back support . The chair shall be visioned with adjustable armrest with PU padding and any position locking arrangements.. The seat cushion to be upholstered on 1mm thick water proof plywood and cut foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be provided with multi position locking and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black Five star chrome base with hooded nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) Dimensions tolerance / variations shall be within +/- 1 cm.Complete as per approved make of image and specification under the guidance of Engineer in charge.

Cubicale Workstation-(modular): Supplying and placing in position of sliding tile base modular Workstation of Size:- L-1500mm x L-1500mmx D-600mm x H-1200mm as per image with . Free standing partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.1-1.2 mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims shall be powder coated with 50 microns. Aluminum trims are elegantly fixed with special fixtures in the partition. The frame work shall be fitted with 9mm thick pre laminated Particle tiles of approved shade. Partition shall have provision for pin up board with fabric/ white marker/ laminated of approved shade.Partition framework shall have adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another above / below the table top. The complete partitioning work shall be carried out as per the approved drawing. Tabletop for workstation made up of 25mm thick pre laminated Particle board of approved shade. The worktop shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s panels should be made from 18mm thick pre laminated Particle board of approved shade. All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of one PVC keyboard tray and Metal CPU trolley with lockable castors for each seating.Provision of Mobile Pedestal.Provision of two side partition Size ;- L-600mm x D-67mm x H-1200mm.

Round table chair: Supplying and placing in position of 360 degrees revolving low back chair as per photograph. The chair of Size :- (W)625mm X (D)450mm X (H) 920mm. The breathable mesh back chair with cushioned fabric seat shall be ergonomically design with curved design . The chair shall be provisioned with fixed armrest and nylon base. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be provided with push back mechansm and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black Five star nylon base with hooded nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) Dimensions tolerance / variations shall be within +/- 1 cm. Complete as per approved make of image and specification under the guidance of Engineer in charge.

DECOR MODULAR SYSTEMS PVT. LTD.

METALEX OFFICE SYSTEM PVT LTD

Swani Furniture Point Pvt. Ltd.

Momentum Techsys Pvt Ltd

Shreeji Modular Furniture

M I A CONSTRUCTION PVT LTD