REPAIR/MAINT OF DG SETS, SEWAGE TREATMENT PLANT, CEILING FANS AND OTHER MISC ITEMS AT ALWAR

Amount

M&L for draining out water and cleaning / desludging of raw sewage from the following locations of STP (Sewage Treatment Plant) at MAP quarters complex Itarana by manually or mechanically, removing raw sewage / sludge outside the MD land in covered Van / trolley and disposed off in allowable area, cleaning the inner surfaces of walls and bottom of chamber / tank by means of scrapping by suitable steel brushes, cleaning & washing of inner surfaces of walls & bottom of chamber / tank using high grade bleaching powder and water complete all as specified & directed :-Notes (i) The item shall be executed only after written permission of Engineer-in-Charge. (ii) The contractor’s quoted rates shall be deemed to be included the element of working in foul and unhygienic conditions. Nothing shall be paid extra on this account. Contractor shall take all safety precautions into account and all safety tools shall be provided by the contractor to all working staff. In case of any mishappening / casualty happens, no claim whatsoever in this respect will be admissible, the entire responsibility shall be of the contractor and no compensation will be entertained in this regard by the department. Insurance, compensation to persons etc shall be liability of the contractor. Cost of the same shall be deemed to be included in the rates quoted by the contractor. (iii) The contractor shall be responsible for making good the damages occurred due to negligence in workmanship during cleaning of chamber / tank. The decision of the Accepting Officer shall be final and binding with regard to a particular defects / damages / breakage of existing equipments / lines / structures etc during cleaning which may be caused due to contractor’s people. (iv) No T&P shall be supplied by the department.

Bar & Screen Chamber

Equalization Tank

Reactor / SBR Tank

Treated Water Tank

M&L for maintenance, treating and monitoring the raw sewage by adding required chemical in proper and specified qty to reduce the level of pollution in the waste water to the limits specfied to make water suitable for use in horticulture / arboriculture :-

Sodium hypochlorite liquid solution 9%. Make : Hybrid laboratories / Mac India or equivalent as approved by GE.

Gur in solid form

Lime in Powder Form

Poly Electrolyte Solution

Testing of sewage effluent at the inlet of raw sewage sump and equalization tank and out let of treated water tank / chlorine contract tank, sampling and analysis to be carried out from NABL accredited authorized Lab as per IS-3025 for essential parameters such as BOD, COD, TSS, TDS, PH, Coil form & grease etc and submitting test results to Engineer-in-Charge complete all as specified and directed. Note :- Samples of raw sewage & post treated sewage water to be collected by the contractor in presence of representative of Engineer-in-Charge every month & results of the test shall be submitted to department.

M&L for taking out unserviceable SBR Feed Pump with electric motor 20 HP after disconnecting all electrical connections etc., dismantling & cleaning of pump set, removing the burnt winding, repair to damaged slots and rewinding the motor with new super enameled copper wire of same gauge with equal number of turns, varnishing, taping with cotton taps & drying including replacement of unserviceable minor parts such as seals, nut bolts, screws, bearing, shaft etc and re-assembling the pump set and re-installation at site, commissioning the pump set and testing on full load for 8 Hrs, including shifting to & from workshop, complete, all as specified & directed.

All as per serial item No. 4.00 here-in-before but 10 HP Sludge Transfer Pump.

All as per serial item No. 4.00 here-in-before but 20 HP Blower Motor.

M&L for repair and servicing air cooled blower / compressor by replacing & topping up compressor oil (ISO VG 320 of make - SERVO (IOCL) / MAK (BP) / HPCL), filter, rubber washers, gaskets, oil seal, bearing etc, proper cleaning, proper alignment, adjusting belt tension, checking and ensuring the proper functioning of air blower with motor complete all as specified and directed.

S&F mild steel chain block set 2T with chain not less than 10 m in length for hanging of sewage submersible pump including taking down old unserviceable chain set.

M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, coping filling etc 150 mm thick as in sub base surface finished fair and even complete all as specified and directed.

S&F nylon threaded PVC hose pipe (Green) heavy duty of size 80mm dia including hose clips of required size including taking out old unserviceable hose pipe with clips.

S&F 6 sqmm multistranded copper conductor, 3 core PVC insulated and sheathed copper screen protected 1100 Volts grade submersible flat cable fixed to column pipes with suitable clamps & jointing material complete including disconnecting & taking out old unserviceable cable.

M&L for preparation of old treated steel & iron surfaces of STP and machinary with all equipments like pumps, panel, chlorine plant, compressor , valves & pipes, ladder etc of any sizes and applying two coats of synthetic enamel paint of approved tint complete all as specified and dirrected.

Surface dressing not exc 15cm deep in soft/loose soil levelling of surface, throw extra wastage material out of fencing area and clean the Sub Station area weill in standard all as specified and directed by Engr-in-Charge.

M&L for fabrication of duct cover & valve pit chamber cover made out of angle iron frame and MS plates including of openable arrangement by Haeavy duty MS hinge painted with synthetic enamel paint over a coat of primer including grouting of frame in PCC or brick work, with double layer or white wash including taking down old rusted pit cover all as specified and directed.

Repair and maintenance/ servicing of DG sets of different capacities Located at different pockets at Mil Stn Itarana/city area by carryout the following tasks for 160 KVA capacity of DG set of Make -Kirloskar / Cumins or equivalet make as approved by GE. (i) Cleaning of air filters. (ii) Checking tightening of all nuts and bolts. (iii) Greasing Generator. (iv) Checking of batteries, flexible coupling, injectors, thermostats, monitoring functions, compression, turbo charger clearance of bearings, air and water hoses pipings, zinc protective pipes, coupling disc of fuel pump drive, 'V' Belts. (v) Lubricate the raw water pump. (vi) Checking and seting of speed governor and engine shut down for proper functioning. (vii) Cleaning of crankcase ventilation, cooling water spaces, inter cooler. (viii) Checking carbon brushes and starter pinion. (ix) Checking carbon brushes of generator and lubricating the bearings. (x) Testing of FIP timing by fuel out of method. (xi) Checking of supply & return fuel pipes from fuel tank to engine. (xii) Self & charging alternator cleaning and testing, checking of working & minor fault remover. (xiii) Testing & checking of AC & DC wirings.

All as per serial item No 15.00 here-in-before but 125 KVA capacity of DG set of Make - Kirloskar / Cumins or equivalet make as approved by GE.

All as per serial item No. 15.00 here-in-before but 20 to 62.5 KVA capacity of DG set of Make - Cumins / Kirloskar / Ashoka Leyland / Greaves or equivalet make as approved by GE

All as per serial item No. 15.00 here-in-before but 7.5 to 15 KVA capacity of DG set of Make - Kirloskar / Cumins or equivalet make as approved by GE

Supply and replacement of Lub oil, SAE 20W40 grade and all as specified and directed by Engineer-In-Charge. Make- Castrol /HP/ Ind mobil.

Repairs to exhaust piping including cleaning and replacing asbestos rope 6/12 mm or as required at site complete all as specified and directed.

Supplying and filiing of coolent and all as specified and directed by Engineer-In-Charge. Make- Castrol / HP / Ind mobil / TATA

S&F in replacement of Fuel filter element suitable for diesel engine of 160 KVA capacity of make - Cumins all as specified and directed by Engineer-In-Charge.

All as per serial item No. 22.00 here-in-before but 125 KVA capacity of Make - Kirloskar / Cumins or equivalet make as approved by GE

All as per serial item No. 22.00 here-in-before but 20 to 62.5 KVA capacity of Make - Cumins / Kirloskar / Ashoka Leyland / Greaves.

All as per serial item No. 22.00 here-in-before but 7.5 KVA to 15 KVA capacity of Make - Kirloskar / Cumins or equivalet make as approved by GE

S & F in replacement of lub oil filter element suitable for diesel engine, of 160 KVA capacity of Make - Kirloskar / Cumins or equivalet make as approved by GE

All as per serial item No. 26.00 here-in-before but 125 KVA capacity of Make - Kirloskar / Cumins or equivalet make as approved by GE

All as per serial item No. 26.00 here-in-before but 20 to 62.5 KVA capacity of Make - Cumins / Kirloskar / Ashoka Leyland / Greaves.

All as per serial item No. 26.00 here-in-before but 7.5 KVA to 15 KVA capacity of Make - Kirloskar / Cumins or equivalet make as approved by GE.

S & F of air filter suitable for diesel engine, 160 KVA capacity of Make - Cumins all as specified and directed by Engineer-In-Charge.

All as per serial item No. 30.00 here-in-before but 125 KVA capacity of Make - Kirloskar / Cumins or equivalet make as approved by GE

All as per serial item No. 30.00 here-in-before but 20 to 62.5 KVA capacity of Make - Cumins / Kirloskar / Ashoka Leyland / Greaves.

All as per serial item No. 30.00 here-in-before but 7.5 KVA to 15 KVA capacity of Make - Kirloskar / Cumins or equivalet make as approved by GE

S & F in replacementof 'V' belt suitable for diesel engine, of 160 KVA capacity of Make - Kirloskar / Cumins or equivalet make as approved by GE

All as per serial item No. 34.00 here-in-before but 125 KVA capacity of Make - Kirloskar / Cumins or equivalet make as approved by GE

All as per serial item No. 34.00 here-in-before but 20 to 62.5 KVA capacity of Make - Cumins / Kirloskar / Ashoka Leyland / Greaves.

All as per serial item No. 34.00 here-in-before but 7.5 KVA to 15 KVA capacity of Make - Kirloskar

S & F of exhaust silencer suitable for diesel engine, of any capacity of make - Kirloskar / Cumins or equivalet make as approved by GE

All as per serial item No. 38.00 here-in-before but 160 KVA capacity of Make - Kirloskar / Cumins or equivalet make as approved by GE

Supplying and filling of distilled water and all as specified and directed by Engineer-In-Charge.

M&L for scraping the peeled oil Paint on DG set of 160 KVA capacity of Make - Cumins including alternator, engine and fuel tank, preparing the surfaces, cleaning the dust, dirt and applying the two coat of synthetic enamel paint of approved shade all as directed by Engineer-In-charge.

All as per serial item No 41.00 here-in-before but 125 KVA capacity of Make - Kirloskar

All as per serial item No 41.00 here-in-before but 20 KVA to 62.5 KVA capacity of Make - Cumins / Kirloskar / Ashoka Leyland / Greaves.

All as per serial item No 41.00 here-in-before but 7.5 KVA to 15 KVA capacity of Make - Kirloskar

S & F in repair fuel pipe hand feed pump to fuel suitable for diesel engine, of 160 KVA capacity of Make - Cumins and all as specified and directed by Engineer-In-Charge.

All as per serial item No 45.00 here-in-before but 125 KVA capacity of Make - Kirloskar

All as per serial item No 45.00 here-in-before but 20 KVA to 62.5 KVA capacity of Make - Cumins / Kirloskar / Ashoka Leyland / Greaves.

All as per serial item No 45.00 here-in-before but 7.5 KVA to 15 KVA capacity of Make - Kirloskar

M&L for servicing of self starter 12/24 volts DC from DG set, dismantling complete and replacement of solonide field coil

M&L for in replacement, turbo kit of DG Set of 160 KVA capacity of Make - Cumins

M&L for in replacement, turbo kit of DG Set of 125 KVA capacity of Make - Kirloskar

M&L for in replacement, turbo kit of DG Set of 20 to 62.5 KVA capacity of Make - Cumins / Kirloskar / Ashoka Leyland / Greaves.

Dismantling the radiator and fan from the engine for cleaning of copper tubes and cooling fins by using decasting solution and soldering, patch work incl water pumps assembly for replacement of defective water pumping assembly and transporting to repair workshop and all as directed by Engr-in-Charge, for 160 KVA capacity DG sets of Make - Cumins.

All as per serial item No 53.00 here-in-before but 125 KVA capacity of Make - Kirloskar

All as per serial item No 53.00 here-in-before but 20 KVA to 62.5 KVA capacity of Make - Cumins / Kirloskar / Ashoka Leyland / Greaves.

All as per serial item No 53.00 here-in-before but 7.5 KVA to 15 KVA capacity of Make - Kirloskar

M&L for rewinding of alternator field coil with super enamelled copper winding wire insulated complete of suitable size of copper wire with 20 to 160 KVA capcity DG set of Make - Cumins / Kirloskar / Ashoka Leyland / Greaves.

All as per serial item No. 57.00 here-in-before but 7.5 KVA to 15 KVA capacity of Make - Kirloskar

M&L for rewinding and refixing of armature winding with super enamelled copper winding wire insulted complete of suitable size of copper wire with 20 to 160 KVA capcity DG set of Make - Cumins / Kirloskar / Ashoka Leyland / Greaves.

All as per serial item No. 59.00 here-in-before but 7.5 KVA to 15 KVA capacity of Make - Kirloskar / Cumins or equivalet make as approved by GE

M&L for alternator bearing suitable for 125 KVA capacity DG set of Make - Kirloskar, all as specified and directed.

All as per serial item No. 61.00 here-in-before but 20 KVA to 62.5 KVA capacity of Make - Cumins / Kirloskar / Ashoka Leyland / Greaves.

All as per serial item No. 61.00 here-in-before but 7.5 KVA to 15 KVA capacity of Make - Cumins / Kirloskar / Ashoka Leyland / Greaves.

S&F in repair of engine start relay, 12/24 V DC for Gen Set 3 cranks on & off 0-30 sec each stable

M&L for repair/overhauling of self starter ic, replacement of carbon brushes, bearing, bushes, rewinding of armature and field etc and varnishing complete all as directed of the 12 volt capacity:-

M&L for repair/overhauling of self starter ic, replacement of carbon brushes, bearing, bushes, rewinding of armature and field etc and warnishing complete all as directed of the 24 volt capacity:-

S&F battery lead with brass terminals for 7.5 to 160 KVA DG set complete,

S&F in repair, replacement of self charging maintenance free bty of 12V, DC 150-180 Ah. Make : Exide/Amron/Luminous

S&F in repair, replacement of self charging maintenance free bty of 12V, DC 120-130 Ah. Make : Exide/Amron/Luminous

S&F in repair, replacement of self charging maintenance free bty of 12V, DC 88-90 Ah. Make : Exide/Amron/Luminous

M&L for calibration of FIP of DG set of 160 KVA capacity of Make - Kirloskar / Cumins or equivalet make as approved by GE

M&L for calibration of FIP of DG set of 125 KVA capacity of Make - Kirloskar / Cumins or equivalet make as approved by GE

M&L for calibration of FIP of DG set of 20 to 62.5 KVA capacity of Make - Cumins / Kirloskar / Ashoka Leyland / Greaves.

M&L for calibration of FIP of DG set of 7.5 to 15 KVA capacity of Make - Kirloskar / Cumins or equivalet make as approved by GE

M&L for repair/overhauling of battery charging alternator 12/24 Volts, replacement of carbon brushes, bearing, bushes, rewinding of armature and field etc and warnishing complete all as directed of 160 KVA capacity of Make - Cumins.

All as per serial item No. 75.00 here-in-before but 125 KVA capacity of Make - Kirloskar / Cumins or equivalet make as approved by GE

All as per serial item No. 75.00 here-in-before but 20 KVA to 62.5 KVA capacity of Make - Cumins / Kirloskar / Ashoka Leyland / Greaves.

All as per serial item No. 75.00 here-in-before but 7.5 KVA to 15 KVA capacity of Make - Kirloskar / Cumins or equivalet make as approved by GE

S&F in repair readiator hose pipe set incl necessary connections etc for 160 KVA capcity of Make - Kirloskar / Cumins or equivalet make as approved by GE

All as per serial item No. 79.00 here-in-before but 125 KVA capacity of Make - Kirloskar / Cumins or equivalet make as approved by GE

All as per serial item No. 79.00 here-in-before but 20 KVA to 62.5 KVA capacity of Make - Cumins / Kirloskar / Ashoka Leyland / Greaves.

All as per serial item No. 79.00 here-in-before but 7.5 KVA to 15 KVA capacity of Make - Kirloskar / Cumins or equivalet make as approved by GE

S&F in repair push button start/stop with NONC, all as specified and as directed

S&F in repair starting key switch in three positions, all as specified and as directed

S&F in repair AVR for suitable DG sets of Make - Kirloskar / Cumins or equivalet make as approved by GE

M&L for taking out unserviceable non clog submersible sewage pump 4 KW/ 5.5 HP of make KSB model KRTU-100 from the sump including all vertical pipe/hose pipe, disconnecting all electrical & water connections etc. & dismantling the pump set, cleaning of sludge/mud etc., removing the burnt winding coils & rewinding the motor with cable round type, 7 core, 10 mtr long super enamelled copper wire of same gauge with equal number of turns including replacement of unserviceable parts such as oil seals (2 Nos), bearing bushes (01 No), cable seal (01 No), rubber gasket bolts (04 Nos) & nuts 5/8"x3" (8 Nos) of existing make & type including necessary high carbon steel nuts & bolts etc of suitable sizes & re-assembling the pump set and lowering the pump in sewage sump including connections of all vertical hose pipes including all necessary clamps 80mm with nuts, bolts & gaskets complete, commissioning the pump set and testing on full load for 8 Hrs, complete, all as specified & directed.

All as per serial item No. 86.00 here-in-before but 5.5 KW / 7.5HP

All as per serial item No. 86.00 here-in-before but 2.2 KW / 3HP

S&F in repair power diode for DG sets , all as specified and as directed.

S&F in repair oil pressure meter complete all as specified and directed.

S&F in repair water temperature meter & RPM meter complete all as specified and directed.

S&F in repair oil temperature meter complete all as specified and directed.

S&F in repair oil pressure pipe complete all as specified and directed.

S&F in repair fuel pressure pipe complete all as specified and directed.

S&F in repair DG set gasket set incl head gasket complete all as specified and directed.

S&F in repair fuel pipe complete all as specified and directed.

S&F in repair 12/24 V DC stop solonoid complete all as specified and directed.

S&F in repair 12/24 V DC on line solonoid complete all as specified and directed.

M&L for DG set control wiring of existing gauge with lugs and connecting accessories complete all as specified and directed

M&L for repairing cylinder head with linear piston set, O-ring set, rubber ring, replacement of main bearing, big bearing, CR bearing, connecting check, valve pairs, valve seal, valve block, gaskets, seat, guide crank seal, oil pump repairing, connecting bush including grinding etc and repositioning of head for suitable DG set all as specified and directed

S&F rediator fan blade of diesel engine complete all as specified and directed

S&F in repair feed pump kit complete all as specified and directed.

Supply only following spare parts suitable for submersible sewage pump non clog type including motor of 7.5/5.5 HP capacity of make KSB/ KIRLOSKAR or equivalent as directed by Engineer-in-Charge :-

Stator for 5.5 HP Sewage submercible pump set

Stator for 7.5 HP Sewage submercible pump set

Rotor for 5.5 HP Sewage pump set

Rotor for 7.5 HP Sewage pump set

Top cover for 5.5/7.5 HP sewage pump set

Botton cover with pump casing for 5.5/7.5 HP sewage pump set

Oil seal for 5.5/7.5 HP sewage pump set

Semi open type impeller for 5.5/7.5 HP sewage pump set

Rubber Ring for 5.5/7.5 HP sewage pump set.

M&L for overhauling of non clog sewage pump set diesel engine driven trolley mounted 5 HP, make - Kirloskar by dismantling the parts from engine and pump, drain out existing old engine oil & reassembling the same after carrying out the necessary repair/replacement of spares, machining etc, complete, all as specified & directed. Notes :- (i) The spare parts required to be replaced shall be included in quoted rate. (ii) Unit rate (quoted by the tenderer) shall be deemed to include for minor spares/extras. The decision of Accepting officer regarding minor spares/extras shall be final, conclusive and binding.

Supply only following spare parts suitable for non clog sewage pump set diesel engine driven trolley mounted 5 HP, Make - Kirloskar as directed by Engineer-in-Charge :- Note :- All spare parts shall be fixed in the pumps & motors only after prior inspection & approval of Engineer-in-Charge for which these shall be produced by the contractor at store yard of AGE (E/M) Alwar.

Engine cover gasket set

Head Gasket

Oil filter

Diesel filter

Fuel pipe from pump to filter

Hose Clamp

Air cleaner

Nozzel pump repairing

Engine Oil

M&L for rewinding, overhauling and servicing of ceiling fan of size 48" (1200mm) sweep, 230 volt, 50 C/S, AC by dismantling the fan, taking out existing stator, removing of burnt winding from stator and rewinding the same with super enamelled copper winding wire of same gauge, same weight & turns including varnishing of winding, oiling of bushes and greasing of bearings, reassembling, cleaning, testing and repair the fan including S&F necessary minor spares/items like PVC insulated copper wire of required size, screw, nuts, bolts, spring washer etc and reassembling, cleaning, painting, numbering and testing all as specified and directed by Engineer-in-Charge. Note :- Repairable fans shall be collected by the contractor from the E/M fan store and shall be deposited to E/M store after necessary repairs. Necessary transportation charges shall be deemed to be included in the quoted rate and to be paid by the contractor to the transort agency.

All as per serial item No 106.00 here-in-above but ceiling fan of size 56" (1400mm) sweep.

All as per serial item No 106.00 here-in-above but Exhaust fan of size 18" (450mm) sweep.

All as per serial item No 106.00 here-in-above but Exhaust fan of size 12" (300mm) sweep.

All as per serial item No 106.00 here-in-above but Exhaust fan of size 9" (230mm) sweep.

All as per serial item No 106.00 here-in-above but wall mounted fan of any size.

Supply & fixing following accessories / spares of ceiling fan / Exhaust fans /wall mounted fan :-

Fan capacitor 2.5 Mfd 230/240V AC, 50 HZ ISI marked all as directed. Make : Havells / Epcos / L&T as approved by GE.

Fan capacitor 4 Mfd 400/440V AC, 50 HZ ISI marked, all as directed. Make : Havells / Epcos / L&T as approved by GE.

Gun Metal bush (Make – NSP) suitable size for ceiling fans of any make and any size.

Ball bearing No 112/6201, all as directed. Make : NBC / SKF as approved by GE.

Ball bearing No 115/6202, all as directed. Make : NBC / SKF as approved by GE.

Ball bearing No 117/6203, all as directed. Make : NBC / SKF as approved by GE.

Ball bearing No 117/6204, all as directed. Make : NBC / SKF as approved by GE.

Fan regulator electronic rotary step type and socket module suitable for ceiling fan of sweep 1200/1400 mm complete all as specified and directed by Engineer-in-Charge.

‘H’ clamp complete with rubber real, bolt nut & split pin

Blade screw (SS type) suitable for 48" sweep ceiling fan (As per sample kept in GE’s Office)

Upper & lower canopy (PVC) suitable for 1200mm/1400mm ceiling fan (Set of 2, i.e. upper & lower) of Make : Crompton / Kessells / GEC / Orient / Usha as approved by GE.

Fan Blade suitable for 48" sweep ceiling fan (As per sample kept in GE’s Office)

Down rod from hanging point to ceiling fan base upto length 1 meter suitable for 48" sweep ceiling fan as per sample.

S&F in repair steel shaft suitable for ceiling fan/exhaust fan/wall mounted fan of any make/model and sweep with necessary works like cutting, grouting, lathing finishing etc all as specified and directed by Engineer-in-Charge.

M&L for painting / marking SM No/ MES No on ceiling fan and exhaust fan using on coat enamelled paint complete all as per directed by Engineer-in-Charge.

Disconnecting and taking down carefully existing electric energy meter of any capacity including removing of electric connections and depositing the electric energy meter in store yard of AGE E/M, all as directed.

Fixing only tamper proof electronic energy meter (AC Static kWh meter) with LCD Display, Single Phase, ISI marked, 10 to 60 Amps (Measures & display KWh, V, KW, PF, Last month history of KWh, MD in KW), 240 Volts, AC, 50 Hz, power consumption less than 1 watt, Class 1 accuracy as per IS : 13779, starting current 0.4% of basic current, overload capacity 400% of basic current for direct reading, with special features like TOD, tamper looging, optical communication port & display in absence of power, projection mounted type, fixed in & including appropriate size pilfer proof meter box i.e. meter cupboard (complying to IS:14772) with hinge type locking arrangement moulded in transparent engineering plastic with sealable provisions and making connections with existing DBs/Sub main and providing seal with sealing wire & lead seal and testing of meter including writing MES No & Qtr No on energy meter with thicker white synthetic enamel paint, complete, all as specified & directed. Make :- L&T / HPL / SECURE as approved by GE. Note :- Tamper proof electronic energy meter shall be issued under Schedule ‘B’ free for fixing only.

S&F in repairs single core PVC insulated and unsheathed multistranded copper conductor FRLS cable of size 6 Sqmm of 1100 Volt grade (ISI marked, IS: 694) drawn into and including PVC flexible pipe of suitable size fixed on surface of walls/ceiling to provide connection from electronic energy meter to distribution board and main cable connection to electronic energy meter, complete, all as specified & directed.

S&F in repairs PVC connection clamp to electric connection for ceiling fans complete all as specified and directed.

S&F in repairs exhaust fan of size 8" (200mm) sweep 220 Volt, 50 Hz complete all as specified and directed. Make : Havells/Orient/CG/Usha

M/s ASK Enterprises

Bhawani Electricals