Providing special repair to EI and additional EI in DIC building at Panipat.

Amount

1 : - Supply and erection of PVC copper insulated and sheathed 2-core circular flexible wire. Size 1.50 sqmm ( 48 / 0.20mm). 31.9 (i) d

2 : - Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections . Triple pole switch 32 amp. 415 Volts, 31.12 (a) (viii) Cat-B

: - Triple pole switch 63 amp. 415 Volts. 31.12 (a) (ix) Cat-B

3 : - Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. S.P.N. enclosure for single pole MCB 20 amp. 31.15 (ii)

4 : - Blanking sheet . Supply and erection of blanking sheet in existing distribution board. 31.16 (i)

5 : - Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. Miniature circuit breakers of 9 KA breaking capacity. SP MCB of 9 KA breaking capacity 6 amp. to 32 amp. 31.17a) (ii)

: - SPN MCB of 9 KA breaking capacity 6 amp. To 32 amp. 31.17(a) (ii)

: - TPN MCB of 9 KA breaking capacity 6 amp. to 32 amp. 31.17(a) (ii)

: - TPN MCB of 9 KA breaking capacity 40 amp. to 63 amp. 31.17(a) (iii)

6 : - Supply and erection of Fittings and Accessories. Call bell 220 / 230 volts A.C. bakelite with double coil. 31.18 (vii)

: - Switch 5 amp. On existing sheet. 31.18 (xii)

: - Wall socket 5 amp. On existing sheet. 31.18 (xiii)

: - 15 amp. Switch on existing sheet . 31.18 (xiv)

: - 3 pin 15 amp. Multi socket on existing sheet. 31.18 (xv)

: - Bakelite sheet including fixing with brass screws and washers. 5 mm thick . 31.18 (xviii) (a)

: - Erection only of 1x40 watts or 2x40 watts 1220 mm long / 1x20 watts or 2x20 watts ,610 mm long fluorescent tube fitting directly on wall including necessary connections with 0.75 sqmm ( 24 / 0.20 mm ) PVC copper flexible cable for connecting the tube with the adjecent point. 31.18 (xxiv)

7 : - Erection and carriage of fans.. Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work. 31.20 (i)

: - Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to he site of work. 31.20 (iii)

: - Making suitable hole in the wall upto 450 mm sweep exhaust fan including finishing the same and fixing of wire mesh duly fixed with Deodar wood frame of section 40 mm x 25 mm thick. 31.20 (v)

: - Pdg. and fixing of required size of deodar wood frame of section 50 mm x 32 mm for fixing exhaust fan upto 450 mm sweep. 31.20 (vi)

8 : - Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Galvanised iron pipe 50 mm dia on surface. 31.21 (vi)

: - Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness on surface. 31.21 (xv)

: - Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness on surface. 31.21 (xvi)

: - Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed. 31.21 (xxi)

: - Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed. 31.21 (xxii)

9 : - Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . 31.22(i)

: - Extra for using salt and charcoal / coke for pipe earth electrode as required. 31.22(ii)

: - Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required . 31.22(xii)

: - Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. stapples of same size. 31.22(xix)

10 : - Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 10 Sq. mm 2 Core Cable . 31.26 (iv) Ard.

: - 16 Sq. mm 4 Core Cable . 31.26 (xI) Ard.

11 : - Supply and erection of suitable compression type brass cable glands for underground Cable. 10 Sqmm to 16 Sqmm Cable 2 to 4 Core . 31.28 (ii)

12 : - Street Light. Supply and erection of weather proof M.S.Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S.sheet hinged cover, locking arrangemrnt , housed in wall , including the cost of 1 no. 16 amp. 415 volts kit-kat and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board in the M.S.Box including painting and necessary connections . 31.30 (IV)

13 : - Wiring in 1.5 sq.mm PVC Insulated Copper conductor cable in 1.6 mm thick conduit pipe. 3 pin 5 amp. plug point including earthing the 3rd. pin etc. Medium Point 31.36 (VII) (b)

: - Long point. (c)

: - 3 pin15 amp. plug point with 4 sq mm PVC insulated Copper conductor cable- including earthing the 3rd. pin etc. Medium Point 31.36 (VIII) (b)

: - Long point. (c)

14 : - Wiring only in 1.5 Sqmm PVC insulated copper conductor cable in existing conduit pipe and MS boxes covered with 5mm thick bakelite sheet including cost of switch, wall socket, ceiling rose etc. Fan Point Short point 31.38 (I) (a)

: - Medium Point (b)

: - Long point. (c)

: - Light Point Short point 31.38 (II) (a)

: - Medium Point (b)

: - Long point. (c)

: - 3 pin 5 amp. plug point including earthing the 3rd. pin etc. Short point 31.38 (VII) (a)

: - Medium Point (b)

: - Long point. (c)

: - 3 pin15 amp. plug point with 4 sq mm PVC insulated Copper conductor cable- including earthing the 3rd. pin etc. Medium Point 31.38 (VIII) (b)

: - Long point. (c)

15 : - Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe . Size 1.5 sqmm ( 3/0.81 ) 31.40 (i)

: - Size 2.5 sqmm ( 3/1.05 ) 31.40 (ii)

: - Size 4 sqmm ( 7/0.85 ) 31.40 (iii)

16 : - Supply and erection of Double door sheet steel enclosure distribution boards suitable for MCB's & ELCB's recessed in wall including bonding to earth complete with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4-way , SP&N ( Horizontal) 31.41 (i)

: - 4-way , TP&N ( Horizontal) (8+12) 31.41 (v)

: - 8-way , TP&N ( Horizontal) (8+24) 31.41 (vi)

17 : - Supply and erection of PVC pipe ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work. 25 mm dia. 31.44 (ii)

18 : - Supply and erection of MS Saddle and clamps duly galvanised , on wall / RCC parapit for fixing underground cable at a distance of 0.60 meter center to center fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect and upto entire satisfaction of the Engineer-in-charge of work. 31.48

19 : - Supply and erection of MS box made of 16G MS Sheet recessed in wall, with arrangement of fixing brass screws including cost of 2 Nos. checknuts of required size and one no. PVC bush for each pipe including all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-charge of work. With 2 coats of primer 31.49 (i)

20 : - Supply and erection of 50mm diameter 1.5meter Long GI bracket (B-Class) making an angle 10 to 15 degree with horizontal plane for mounting street light fitting on GI bracket on wall with 2 Nos. 50mmx3mm thick MS flat including cost of cutting welding of GI pipe complete with cement sand mixture bolts and nuts etc. including making necessary connection with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-charge of the work. 31.53

21 : - Supply & erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Delux model No. 50440 ISI / SSK make PC 561 operated on 120/280 V A.C. Supply complete including cutting of existing Bakelite sheet and making necessary connection etc. up to the entire satisfaction of the Engineer-in-Charge of the Work. 31.55

22 : - Supply and erection of PVC pipe ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-charge of work. PVC pipe of 40mm dia 31.58 (ii)

23 : - S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 meter below ground level including diging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-incharge of the work HDPE pipe 63 / 50mm outer dia / inner dia. 31.67 (i)

24 : - Supply & Erection of Hot Dip Galvanized octagonal pole of 3 mm thickness, with base plate including cost of nut and bolts and all accessories as supplied by the manufacturer including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete with door locking arrangement. Terminal plate consisting of 2 Nos. 100A. 4 pole natural links including connection etc. with suitable connecting arrangment for 2 no. MCBs / kit kat including cost of R.C.C. 1:1.5:3 for foundation of size 0.7 M. x 0.7 M. x 1.8 M with minimum 8 Nos. 12mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200mm C.C. for fixing the pole with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineerin-charge of the of the work. 7 meter Long pole with top dia 70mm and botom dia 130mm with base plate of size 220 x 220 x 12mm. 31.68 (i)

25 : - S&E of single arms bracket made of 50mm dia GI pipe B class 0.75 mtr. Long with 25mm dia bottom pipe GI with coller pipe (GI) 100mm dia 60cm Long with MS nipple as required for fixing of fitting duly welded at end of bracket top covered with ornamental cap duly welded, painted 2 coats of aluminium paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-in charge. NS

26 : - Supply and erection of 72W LED Streetlight Luminaires with Pressure die cast aluminium housing with lens and accessories required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work. (Make as per approved list). NS

MANYA ENTERPRISES

MS Yongman Electrical

POMERA AND CO LTD

Som Nath Contractor