Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance 3 NO BANJETIA BANJETIA MURSHIDABAD WEST BENGAL 742102 | MURSHIDABAD | MURSHIDABAD | WEST BENGAL | 742102 | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance MIDNAPUR PASCHIM MEDINIPUR PIN 721101 | MEDINIPUR WEST | WEST BENGAL | 721101 | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹2,000
Closing Date
18 Dec 2023, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER
Paschim Medinipur Zilla Parishad
Installation of Low Mast Light at Tala Bazar of Daharpur mouza under Makrampur GP of Narayangarh Panchayat Samity area in the District of Paschim Medinipur 15th Finance 2023-24)Activity code-70385640
2023_ZPHD_615996_1
PMD/N-506/2023-24
Open Tender
CIVIL AND ELECTRICAL WORKS
Item Rate
90 days
Paschim Medinipur Zilla Parishad
As per SBD
2 documents required · 2 mandatory
₹500
₹2,000
Paschim Medinipur Zilla Parishad
5 Apr 2024
6 Dec 2023
20 Dec 2023
6 Dec 2023
18 Dec 2023
6 Dec 2023
8 Dec 2023
Amount
Supplying and erection by modern engineering practice of 9 mtr. GI Octagonal pole including arrangement of arms fixing with octagonal cross section and contentiously tapered with single longitudinal welding.Total length of the pole will be 9 mtr. ,thickness of sheet should not be less than 3 mm, diameter of the pole at bottom & top will be 170 mm and 70 mm respectively. Pole shafts shall be provided with fixed flange plate of minimum 16 mm thickness with a provision of minimum 4 nos fixing foundation hot dipped galvanised bolts. All other hardware i.e foundation nuts& bolts, washers, spring washers, flats, split pins etc. Should be hot dipped galavanised. Base plat 260mm x 260mm x 16mm . Make – Bajaj, Crompton, Utkarsh/BPP/PWD aaprove make.
Making of RCC foundation with required Grade of concrete (1:1.5:3)with graded stone chips (20mm normal size) shuttering and reinforcement , in ground as per relevant IS codes for soil bearing capacity as per nature of the soil at a depth of 1.00m to 1.50m, collaring shall be 200mm above the ground level . [as per drawing of the pole manufacturer/ pre approve by EIC .
Supplying fitting and fixing 1.1 KV grade 4sq mm 2 core 4Sqmm PVC insulated amounted Alluminium conductor cable for hanging make – Havells /Pollycab / KEI /Glostar
Supplying and fixing 6-32 amp MCB DP,240 v ( Havells/standard/anchor/legrand) on existing sintex box (IP65) on pole.(as per instruction of EIC)
Supply and fixing manual timer 24 hours and sintex box with contactor, 1 no. 6-10A MCBSP C Type, Toggle bypass switch fixed on sintex box (in side 350 mm x 270 mm x 190 mm) on pole incl. supply and fixing of clamp, nut bolts as required and necessary connection. (as per instruction of EIC)
Supply of LED flood light luminaries 120W LED (IP66) With pressure die cast aluminium housing and heat resistant toughened flat glass complete of approved make with constant current LED driver. Make – Bajaj-praze 144LWHNB-A5TG SD or equivalent make of Crompton/Havvells' (JETA IRIS)/Philips
Supplying and Drawing 1.1KV single core standard ‘FR’ PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in 19mm sia 3mm thick Polythene Pipe and by the prelaid GI fish wire and making necy. Connection as required 2×36/0.3(2.5sqmm) + 1×22/0.3(1.5 sqmm) as ECC(from Loop to fittings)
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables for following XLPE/PVC armoured cable
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :
Earthing By 50mm dia ISI-Medium GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level
Supply and fixing ACP signboard on pole including supply and fixing clamp, nutbolt and another necessary accessories, printing photoes as per instruction of EIC.
BLUE STAR
SHRI KRISHNA ELECTRICALS
Shamoli Malakar
Subir Kotal
GOUTAM GHOSH
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .