8289 SPECIAL REPAIRS TO P-15 (OHT) P-1(PUMP HOUSE) P-8(POWER HOUSE BUILDING) UG SUMP, COMPOUND WALL AND FENCING AT RS(P) AND SPECIAL REPAIRS/REPLACEMENT TO BER FANS AT KATTABOMMAN UNDER GE TIRUNELVELI

Amount

Taking down cement plaster on brick or stone wall including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.

Rendering 15mm thick in (CM 1:4)on fair faces of brick work or concrete surfaces and to be finished even and smooth (without using extra lime or cement) including WPC @ 3% weight of cement complete all as specified and as directed Note :- WPC shall be measured and paid separately.

Rendering 15mm thick in (CM 1:6)on fair faces of brick work or concrete surfaces and to be finished even and smooth (without using extra lime or cement) complete all as specified and as directed

Material and labour for preparation of newly plastered surfaces by vacuum based sanding machine , applying alkali resistant primer and applying two coats of emulsion distemper white or coloured by auto roller complete all as specified and as directed .

Material and labour for complete removal of existing treatment from old plastered surfaces of wall by vacuum based sanding machine , removal of nails etc & filling cracks/hole with putty, applying alkali resistant primer and applying two coats of emulsion distemper white or coloured by auto roller complete all as specified and as directed .

Material and labour rendering 10 mm thick Cement plaster in cm 1:3 as in ceiling ,surfaces finished even & Smooth (without using extra cement) all as directed .

Material and labour for preparation of new plastered surfaces of ceiling and apply two coat of white wash complete all as specified.

Material and labour for preparation of old plastered or unplastered surfaces of ceiling and apply two coat of white wash complete all as specified.

Material and labour Preparation of new plastered surface on wall and applying Two coats of 100% Premium acrylic emulsion paint in camouflage pattern having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. all as specified and as directed including necessary scaffolding.

Material and labour complete removal of existing painted wall surfaces and applying two coat of weather proof exterior acrylic paint over a coat of primer of camouflage pattern all as specified and as directed including necessary scaffolding.

Material and labour for preparation of crack /damaged portion of RCC Beam/Column/Wall portion etc and chipping /removing the unsounded concrete portion including treatment to the corrosive/ explosive reinforcement surface with Fosroc Nito Prime and clean the damaged RCC surface by brooming and applying Fosroc Nitobond as per manufacturer's instructions and applying concrete to match with existing surface including form work and necessary scaffolding complete all as specified and directed.

Material and labour for preparation of crack portion by making of groove of min 3mm wide 'V' shape and clean the surface by brooming after that the crack portion filled with approved crack sealant as per manufacturer's instructions complete all as specified and directed.

Material and labour for grouting 25mm thick under stanchion bases or grillages,etc including any temporary shuttering to edges with cement mortar 1:2 including WPC @3% by weight of cement. Note :- WPC Shall be measured and paid separately.

Supply only integral water proofing compound

Demolition of Reinforced cement concrete (reinforcement cut as required to facilitate demolition) as in roofs, floors (other than ground floors), beams, water tanks, staircases, landing, chajjas and similar suspended work etc complete all as specified and as directed.

Material and labour for Framed work such as in grills, gratings , steel rungs and similar works with ends of bar shouldered and/ or riveted forged into spikes including welding all as specified & directed.

Material and labour for preparation of new or previously untreated surface exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide on steel surfaces all as specified.

Material and labour preparation of old surface of iron/steel with two coat synthetic enamel paint over a coat of red oxide primer etc complete and all as specified and as directed

Demolition of concrete surfaces in ground floor and paving n.exc. 15cm thickness (below or above ground level) including tiles all as directed.

Material and labour 25mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate for flooring, Finishing cement concrete surface even and smooth with using extra cement complete all as specified and directed.

Material and labour for Glass dividing strips, 3 mm thick inserted in position, conform to design and 22 mm in width complete all as specified and directed.

Material and labour for 75 mm thick cement concrete type C-2 1:3:6 (20 mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

Material and labour Cement concrete Type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass-concrete complete all as specified and directed.

Material and labour for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set jointed and pointed with grey cement and pigments including laid over screed bedding layer of 20mm thick in CM 1:6 complete all as specified and as directed.

Demolition of brick or stone masonry built in cement mortar including all quions, arches, pillars and angle iron fixed at top etc complete all as specified and directed.

Material and labour for PCC 1;3:6 type C-2 using 40mm graded aggregate as in surface channel and drains complete all as specified and directed.

Material and labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Supply and fix PVC 110 mm dia (SWR) pipe single socketed in any length with rubber ring joints including clamp fixed to walls and taking down old existing pipe complete all as specified and as directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each and removing to or from stores etc complete all as specified and as directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4 Sqm and removing to or from store each etc complete all as specified and as directed.

Material and labour for 2nd class HW Plain, solid, straight Chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

Supply and fixing locally fabricated plain framed paneled shutter 35 mm thick IInd class HW (any number & Panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both face, the size of rail and style as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated etc complete all as specified and as directed.

Supply and fixing locally fabricated 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.24 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed.

Supply and fixing locally fabricated 25 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (with sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.24 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed

Supply and fixing 300mm ordinary MS rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and fixing Sheet glass 4 mm thick , ordinary quality and glazing with beads fixed with metal panel in square in exc 0.5 sq.m in each pane etc complete all as specified and directed

Supply and fixing Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed

Supply and fixing aluminium alloy anodised and fixed in100mm Butt hinges, heavy weight, cold rolled mild steel, complete all as specified and directed.

Supply and fixing aluminium alloy anodised and fixed in 75mm Butt hinges, heavy weight, cold rolled mild steel, complete all as specified and directed.

Supply and fixing aluminum anodized barrel tower bolts of extruded section & fixed 200 mm long etc complete all as specified and as directed

Supply and fixing aluminum anodized barrel tower bolts of extruded section & fixed 75 mm long etc complete all as specified and as directed

Supply and fixing aluminum handles cast type anodized 125 mm size etc complete all as specified and as directed

Supply and fixing aluminum handles cast type anodized 100 mm size etc complete all as specified and as directed

Supply and fixing aluminum plate type Gate and shutter, hooks and eyes 125 mm size etc complete all as specified and as directed

Material and labour preparation of newly wooden based surface and applying two coat synthetic enamel paint over a coat of pink primer etc complete and all as specified and as directed

Supply and fix Aluminium strip door seal as per sample complete all specified and as directed.

Material and labour for Post construction Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

Material and labour post construction anti-termite treatment for providing & injecting along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron / plinth protection complete all as specified and as directed.

Material and labour for Post construction Anti termite treatment At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and directed.

Material and labour 25mm thick PCC 1:2:4 type B-1- using 20 mm graded stone aggregate for flooring, Finishing cement concrete surface even and smooth with using extra cement complete all as specified and directed.

Material and labour Machine cut pre polished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material and labour Prepolished Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed all as specified and as directed.

Dismantling brick tiles or terracing tiles, single layer on roofs including cement screed in roof complete all as specified and directed.

Demolition of cement concrete(unreinforced) in roofs complete all as specified and directed.

Material and labour for 40mm thick providing cement concrete of type B-1, 1:2:4 (20mm graded aggregate) with water proofing compound @3% by weight of cement even and fair surface complete all as specified and directed. Note:- water proofing compound shall be measured and paid separately.

Material and labour rendering 10mm thick plastering on fair faces of concrete surface in CM 1 : 4 with water proofing compound @3% by weight of cement even and fair surface complete all as specified and directed. Note:- water proofing compound shall be measured and paid separately.

Material and labour for applying one coat of bituminous water based primer at the rate of 0.40 ltr/Sqm and evenly a priming/tack coat with coat of hot blown bitumen 85/25 at the rate of 1.20 Kg per Sqm on roof and over this APP based polymeric water proofing membrane minimum weighing 3Kg/Sqm minimum 3mm thick reinforced with polyester non-woven fabric (weight not less than 150 gms/Sqm) laid over primed roof surfaces by torch application and vertical surfaces up to grooves and width of over lap 75mm at sides and 100mm in ends and applying two coats of heat resisting paint on roof surfaces complete all specified and as directed.

Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed for the following sizes:-

(a) 15 mm dia bore

(b) 20 mm dia bore

Supplying, fixing, jointing and testing galvanised Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid in trenches and fixed to wall or laid in floor complete all as specified and as directed for the following sizes:-

(a) 15 mm dia bore

(b) 20 mm dia bore

Supply and fixing 500 ltr capacity or rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked or make specified, double or triple layered(colour: white) construction hoisted and fixed in position including taking down of existing unserviceable tank complete all as specified in SSR Part -I complete all as specified and as directed

Supply and fixing 25mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Supply and fixing 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210gms) complete all as specified and directed

Supply and fixing in repair 15mm bore fancy type chromium plated bib tap cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed

Supply and fixing in repair 110mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint laid in trenches or in floor etc complete all as specified and as directed

Supply and fixing 110mm bore PVC (SWR) bend in any radius etc with access door complete all as specified and as directed

Supply and fixing in repair vitreous China wash down water closet pan (pedestal pattern) white, incl. P or S Trap , connection to drain and flushing pipe complete all as specified and as directed.

Supply and fixing plastic seat cover, closed pattern with flat bottom, complete all as specified and as directed.

Supply and fixing in repair 10 Ltrs capacity PVC low level flushing cistern, ISI marked of make specified with inlet, float valve and handle with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed.

Supply and fixing in repair 15mm bore cast copper alloy chromium plated angle cock with long shank & cup concealed type complete all as specified and as directed.

Supply and fixing in repair PVC connections 150 mm size with PTMT nuts of length 450mm etc complete all as specified and as directed

Supply and fixing in repair fancy type CP Health Faucet (ABS with SS tube 1 Mtr tube and hook complete all as specified and directed. Make :- Prayag Cat Part No BEA--81 or equivalent as mentiond in PS

Supply and fixing in repair PVC (SWR) floor trap, plain with grating 75mm dia including jointing with solvent cement complete all as specified and as directed.

Supply and fixing in repairs Wash basin, Vitreous China white (Flat back) 450 x 300mm including brackets, pinning in ends of brackets or erecting stand etc complete all as specified and directed.

Supply and fixing stainless coupling of size 32 mm full threaded with 80 mm height suitable for Wash hand basin complete all as specified and directed. (Make : Jaquar Code No. ALD-705).

Supply and fixing in repairs pillar cock of 15 mm bore complete all as specified and directed. Make Jaquar, Code No ARI-39011 or equivalent as mentined in PS

Supply and fixing in repairs flush pipe of Polyethylene of low or high density or PVC 32mm dia for Low level cistern, basin & sink complete all as specified

Supply and fixing in repairs Soap Dish Holder complete all as specified and directed. Make Jaquar, Code No AKP - CHR35731P or equivalent as mentined in PS

Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia ‘D’ type 60 Cm long between flanges alluminium anodised all as specified and as directed.

Supply and fixing in repair 75mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint laid in trenches or in floor etc complete all as specified and as directed.

Supply and fixing 75mm bore PVC (SWR) bend in any radius etc with access door complete all as specified and as directed.

Supply and fixing 75mm bore PVC (SWR) junction (single ‘T’) equal or unequal with access door etc complete all as specified and as directed.

Supply and fixing in repair PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement complete all as specified and as directed.

Material and labour non skid ceramic tiles 7 to 8mm thick joint free (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed in CM 1 :4 etc complete all as specified and as directed.

Material and labour for joint free Glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed.

Material and labour Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc confirming to Fe-410-W (Gde-E-250) complete all as specified and as directed.

Material and labour for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc..n exc 10 Kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 Kg each to be measured under 'Structural Steel'

Taking down old AC Sheets corrugated or semicorugated as in roof covering, complete all as specified and as directed.

Supply and fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Material and labour for Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, , with riveted, bolted or welded attachment complete all as specified and as directed.

Material and labour for greasing and servicing to steel rolling shutters including necessary petty repairs complete all as specified and as directed.

Material and labour for steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete push pull or manual type thickness of laths 1.25mm complete all as specified and as directed.

Material and labour for PCC 1:2:4 Type B1 as in lintels upto 1.5m clear span, cills steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, coping, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating all as specified and as directed.

Material and labour for Walling of random rubble masonry un coursed built in cement mortar 1:6 complete all as specified and directed.

Ditto all as per item No.95 above but with old stone masonry ( Excluding material cost of stone) complete all as specified and directed.

Raking out joints / pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement mortar complete all as specified and directed.

Material and labour for Keyed pointing to random rubble uncoursed masonry in CM 1:4 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

S& F Mild steel angle iron cut to shape as directed drilling holes notching for wire as in posts and struts in fencing etc including all necessary cutting and welding etc and for similar work complete all as specified.

All as per item No .100 above but fixing only complete all as specified and as directed.

Supply and fixing in repairs Galvanized 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc a directed ( each line of wire to be measured)

Dismantling of concertina coil dia 850mm to 1200mm or any size or description complete all as specified and directed.

Supply and fixing of Razor blade galvanised barbed concertina coil 1.05m dia coil stretched to a length of 10m to 12m to achieve 950mm dia as in fencing including supply and fixing with special galvanised fasteners such as 'J' clips 'C' clips complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour String courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, Type B1, 1 : 2 : 4 (using 20mm graded stone aggregate) for holding down angles including necessary form work complete all as specified and directed.

Material and labour for rendering 10 mm thick in (CM 1:4)on fair faces of brick work or concrete surfaces and to be finished even and smooth (without using extra lime or cement) complete all as specified and as directed

Material and labour for preparing newly plastered surfaces and applying Two coats of cement base paint over a coat primer on surfaces of walls complete all as specified and as directed.

E/M WORKS

Taking down carefully copper/aluminium point wiring (light, fan, socket and power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed.

Point wiring with two single core 1100 V grade FRLSH insulated unsheathed cables of size 1.5 Sq mm multi-stranded Copper conductor FRLSH drawn through and including rigid PVC conduit and conduit accessories including concealed wiring including breaking of walls and making good to disturbed surfaces in wall/roof/ceiling where required complete with 3 mm hylam sheet cover with an earth wire of PVC cable 1.5 Sqmm FRLSH multi stranded copper conductor and connected to all metal boxes and common earth dolly all as specified and directed light/ fan/ Bell/ etc.

All as per Item No. 111 above, but using one 3 pin 5 Amps switch socket combination on the independent board with other switches, with cables 1.5 Sqmm size.

All as per Item No. 111 above, but using one 3 pin 5 Amps switch socket combination on the same board with other switches, with cables 1.5 Sqmm size.

All as per Item No. 111 above, but using 2.5 sqmm FRLSH single core multi stranded copper conductor cable concealed and make good disturbed surfaces and 2.5 Sqmm FRLSH copper earth wire cable drawn through 20 mm dia PVC conduit including provision of conduit and conduit accessories for One 5 pin, 15 Amps Multi purpose switch socket combination on independent board.

Supply and Fix in repairs Switch Piano, flush type, Single Pole, 230 Volts, AC, one-way 5 Amps with ISI mark complete all as specified and directed.

Supply & Fix in repairs Switch socket outlet, multipurpose, flush type, 3/5 Pin,AC, 230 Volts, 5 Amps complete all as specified and directed.

Supply & Fix in repairs switch socket outlet, multipurpose, flush type, 5 in 1, 5 A/16 Amps, AC, 230 Volts, complete all as specified and directed.

Supply and fixing in repairs electronic type fan regulator rotary step 100 watts complete all as specified and directed.

Supply and Fix in repairs Ceiling rose 3 terminals, surface Bakelite 65 x 50mm complete all as specified and directed.

Supply and Fix in repairs Sheet metal enclosures for DBs single pole 8 way 240 V with neutral bus bar 200 Amps double door type with locking arrangement complete all as specified and directed. Make: Indo Asian Cat No. 811889 or equivalent as mentioned in PS

. Supply and Fix in repairs MCB SPN, AC 240 Volts 32 Amps 10KA, 50Hz 'C' curve complete all as specified and directed.

Supply and Fix in repairs MCB SP 240 V, 6A to 32 Amps 10KA, 50Hz 'C' curve 10KA, 50Hz 'C' curve complete all as specified and directed.

Taking down carefully sub main wiring of any description including batten / PVC conduit pipe on surface and making good disturbed surfaces to match existing all as specified and as directed.

Material and labour sub main wiring with two single core 1100 V grade FRLSH conforming to IS 694 PVC insulated unsheathed cables 6 Sq mm multi stranded copper conductor drawn through and incl. non metallic PVC rigid conduit and conduit accessories fixed on walls/roof/floors/ceiling etc with an earth wire of one run 6 sqmm copper wire earth continuity conductor etc including taking down old sub main wiring complete all as specified and directed by Engr-in-Charge. Note : Two runs of 6 sqmm cable with one run 6.0 sqmm with one run of PVC conduit shall be measured as one run for payment.

Supply and fixing Ceiling fan 1200mm sweep, energy efficient, 5 Star with BLDC motor230 Volt, 50 Hz without regulator, including taking down old unserviceable fan complete all as specified and directed by Engr-in-Charge. Make: Havells, Model :- Efficiencia (BLDC 32W) or equivalent ( NOTE: Old Ceiling fan to be deposited after taking down to MES store.)

Material and labour for Exhaust fan,metal body, heavy duty 300mm sweep, 230 Volt, 50 Hz, with shutters and louvers, including taking down old unserviceable fan complete all as specified and directed by Engr-in-Charge. ( NOTE: Old Exhaust fan to be deposited after taking down to MES store.)

Material and labour for Wall mounting fan,300mm sweep, 220 Volt, 50 Hz, with louvers and fixing arrangement including taking down old unserviceable fan complete all as specified and directed by Engr-in-Charge. ( NOTE: Old Wall mounted fan to be deposited after taking down to MES store.)

Material and labour for Cutting / chasing of wall of appropriate size for fixing of Exhaust fan of 300/450 mm and after fixing make good to disturbed surfaces and match with existing finish, complete all as specified and directed by Engr-in-Charge.

Supply and fixing wall mounted LED 20 watts, batten type fitting for surface and pendant application, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver with connector block etc complete with all accessories internally pre wired and necessary mounting arrangements with PVC block and connection from ceiling rose to fitting complete including dismantling the existing unserviceable fitting, complete all as specified and as directed.

Supply and fix in repairs LED light fitting surface mounted type 2 feet x 10W LED complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed. Make:- Havells, Philips and Jaguar.

Supply and fix LED energy saving surface mounted decorative oval bulk head edge light comprising of high brightness 10W, 6000K LEDs complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed. Make:- Havells Model No. HEXAFT10WLED857SSYMBOPC or equivalent as mentioned in PS

Supply and fix in repairs LED Security light fitting 15 W LED (1800 Lumen) complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, including necessary suitable clamps & bracket GI Tubing medium grade 1mtr long bend into shape complete all as specified and as directed.

Supply and Fix in repairs batten holder (angle / straight), two pin type suitable for self ballast LED lamps screwed with round block including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed.

Supply and fix in repairs LED inverter T-LED bulb 12 W, 2 pin, B 22 type Cool daylight, 8hrs charging time, 4hrs back-up time complete all specified and as directed. Make : Philips, Havells and Jaguar or equivalent.

Supply & Fixing single pointed air termination Aluminium Rod, 12 mm dia and 300 mm long complete all as specified and as directed.

Supply & fix Aluminium strip 25mm x 3 mm complete with saddles and fixing screws for fitting the strip complete all as specified and as directed..

Material and labour for test point terminal block made of gun metal or phosphorus bronze size 75X75X25 mm drilled and screwed including 03 nos 08 mm dia 25 mm long hex lead screw, with suitable MS in closer to accommodate connector of suitable size complete all as specified and as directed

Material and labour for Tubes, 'light grade', galvanised 50mm, with all fittings; laid in trenches complete all as specified and as directed.

Material and labour for earthing complete with copper plate 60 × 60cm × 3.15mm thick electrode and 20 × 3mm copper strip upto 7.5 metre long as earthing lead buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers , provision of 15 mm dia GI pipe medium grade for protection and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire gauge, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance not exceeding 50 metre, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I. Note: The unit rate quoted shall be deemed to include for Earth continuity conductor and GI protection pipe upto 7.5 metres long.

M/S VIGNESH POWER SYSTEM

SIRITEL SYSTEMS PRIVATE LIMITED

MURUKAN BUILDERS